Detergent Drawer Problems in a Washing Machine (Diagnosis & Fixes!)
HTML-код
- Опубликовано: 27 июл 2024
- Detergent Drawer Problems in a Washing Machine (Diagnosis & Fixes!).
Is your Bosch washing machine detergent dispenser not working properly? Here, we run through washing machine dispenser common problems to help get your appliance working properly again.
Whether your washing machine conditioner is not siphoning in the detergent drawer, the detergent drawer appears blocked, or there’s another issue, we have the answers. In this video, we show you how to diagnose any problems your washing machine detergent drawer is experiencing to get it working properly and efficiently again.
Need a new detergent dispenser? Get one here.
www.espares.co.uk/search/pt15...
You can also find any other washing machine spares or accessories you need on the eSpares website.
www.espares.co.uk/browse/at10...
Make sure you’re using your washing machine safely with our washing machine safety checks guide.
www.espares.co.uk/browse/at10...
Want to save money with your washing machine? Check out our energy savings tips here!
• Energy Saving Tips For...
Don’t forget to subscribe to our channel for plenty more videos on appliance maintenance, repair guides and more.
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the video
0:37 Why the conditioner is not siphoning
0:52 How to clean the siphon in the dispenser
1:19 How the jets in the dispenser drawer work
1:52 How to clean the top of the dispenser drawer housing
2:16 How to gain access to the dispenser
3:00 How to free the old dispenser drawer
3:14 Suggested Video: Important Safety Checks For Your Washing Machine
4:43 How to remove the old dispenser drawer lid
5:12 How to fit the new dispenser drawer lid
5:34 Putting the washing machine back together
6:11 Suggested Video: Energy Saving Tips For Your Washing Machine
Thanks for watching! 
Хобби
I 've been ( and my wife, still more) saved by this video; Thanks a lot... I even disassembled the dispendertop, cleaned it and clicked it back in one piece. Fantastic video... Greatings from Antwerp, Belgium!! Dus groeten en doe zo voort.. Go on, doing what you do!! Dirk.
Thanks Dirk for the comments, we hope you also have watched the other video relating to this as well:
ruclips.net/video/ifWK9df1qgg/видео.html
Excellent one of the best for the hard pressed consumer.
Had the same problem just watched this and its solved it. Thank you!
Thanks for the comments Susan.
Great video, helped me a lot, thanks!
+Ray de Vries Thanks for the comment Ray.
Brilliant, worked for me, although I stripped the dispenser compartment top and cleaned it. It just clips together. Excellent video. 👍🏻
David Garside Thanks for your comments, glad to have helped. :-)
+David Garside Second that, excellent video, thanks for creating it. I think the part could be cleaned pretty easily once you know how to take it apart. Thanks for this great video, I'll be sure to checkout your web site for any future spare part needs.
+Gal Aviel Check out another one of our videos as it should cover what is causing the problem: ruclips.net/video/VS48G_cwCXo/видео.html
After taking the "lid off " you do not need to replace it. The inner defuser can be removed or un clipped with a blunt knife, exposing the water path which is the main issue not blocked "jets". It would be good if you ammended your video to to show this simple fix. Which is why Bosch designed the entire soape box to be serviceable.
Hi SV, thank you for your comment, the video was intended to show the causes of problems with the dispenser but there are times when you would have to replace the dispenser top and this video shows how to do that.
Video helped no end and yes I found if you are careful you can remover the inner defuser by unclipping it and gently prising the two pieces apart. Many Thanks.
Quick question i have a Bosch Maxx WFL 1262 and the machine does turn on (ie no lights turn on) I have checked everything other than opening up the machine and testing components. Is there any common problem that this could be ?
Hi Craig, for information to diagnose your problem see our video:
How to diagnose washing machine control and program problems
www.espares.co.uk/advice/7/1793/how-to-diagnose-washing-machine-control-and-program-problems
This will take you through the steps needed to identify a suspect control panel.
Why is it that at some time the detergent in my washing machine is not emptying yet when I start running the machine the water outlet comes with form but the detergent not used, and also another problem when I press start the machine delays to start working and spinning and at some point it stucks at some certain minute counting, it's a nikai washing machine
I do have a problem on a Logixx 9. Each time we start a program, the jets start with (1) the pre-washing and then (2) the washing powder but also the middle one for the conditionner (it seems). Hence it fills up above the MAX and takes down the conditionner within the first 2 minutes of the program. I cleaned up and checked and opened up a bit. I cannot see a fault with the dispenser. I also reduced the pressure of the water. It carries on doing the same. Any ideas. Many thanks !
***** For more information see another of our videos:
ruclips.net/video/VS48G_cwCXo/видео.html
Confirm if both valves are on at the same time. Another possible cause can be pushing the door in to quickly or over filling it as this will cause it to syphon away (check with filling to your normal level and closing in the normal way without starting the machine. if the water goes this is the cause.
Mine is not adding water into the tab I know the reason but I don’t know how to fix it I used hand wash powder
因有這個影片的教學、讓我把LG2003年的洗衣機、修好了！(從沒有修理洗衣機)○
我们很高兴帮助，并通过点击字幕，你可以在屏幕上添加一个中国的描述。
eSpares (We are happy to have helped)
I have a Bosch 500 series. my dispenser drawer has no jets. not sure why it is not taking the softener and bleach but it is not stopped up jets. I think it might work with a vaccum somehow
+Robin Sissell If the water is filling quickly from the other compartments and both are active on final rinse the problem is likely to be the dispenser.
Dear Sir / mine problem is softener go down in the first step not the last ! Would you please tell me what to do ?
Thanks
Hi Talal Al Hadidi, if the softener is going in straight away then it is usually because you are putting too much in which will cause it to go straight so reduce the amount you are putting in.
@@eSpares
Thanks
hello I'm from Nigeria
Hi Auwalu Sanyi, thank you for leaving your post and it's lovely to meet you and we hope you enjoy our channel.
Hi I have the same washing machine and I want to buy the exact same thing. How much is it online please ? So I can order
Hi Nana Akua Anima Oteng, just go to our website and put your details in www.espares.co.uk/search/ma856pt1555/washing-machines/dispensers/bosch
I don't know any reason why you would ever have to buy a new dispenser lid? What it does not show in the video is that once you have removed the lid you can then open it into two halves to clean the inside properly. Just done mine this morning and it is now as new
Hi Clare, thank you for your post and the information which will help other people.
Save some money and clean old part with water and compressed air.
Bock washer machine is best we have Samsung I have to replace entire soap dispenser because some of jets was clogged
Thank you for the tips, nice to have some vocabulary to describe my washer problems!. I have a Bosch Axxis. The water stopped going though the jets, it barely trickles down through the back edge of the dispenser box and ends up in the box's drain hole, not pouring in the actual soap box at all. Also, we only use cold water (just in case it might have any relevance). Any ideas?
Lisa Reutenauer Hi Lisa, Check out another one of our videos as it should cover what is causing the problem: ruclips.net/video/VS48G_cwCXo/видео.html
Buy soap and conditioner combined tabs,problem solved.
Sorry Bettina but even if you put the detergent straight in the drum you can still get mould building up in the dispenser that can cause smells from bacteria. All water fills through the dispenser so if this stays damp mould will grow. For more information watch this video:
ruclips.net/video/ifWK9df1qgg/видео.html
Dave Bleach
Mine is not adding water into the tab I know the reason but I don’t know how to fix it I used hand wash powder