Beginner Tutorial Traxxas Complete Slipper Clutch Assembly Installation adjustment Slash 4x4 TRA6878
HTML-код
- Опубликовано: 11 сен 2024
- Check out the Traxxas Slipper Clutch part here: amzn.to/3aqndGJ
Traxxas Slash 4x4 Complete Slipper Clutch Assembly TRA6878 installation video for beginners. This process is the same for other Traxxas cars and trucks such as the Slash 4x4 Brushed Titan and Brushless VXL (LCG and standard chassis), Rally 4x4, VR46 Ford Fiesta, Rustler 4x4 and Stampede 4x4.
Even after setting the mesh properly in this truck, spur gears were still getting stripped irregularly. Typically, in that case, one of the most common issues is a bad bearing.
So helpful. I'm a noob and I bought a used Slash 4x4. I tried to drive it and it moved but felt like the clutch was slipping as it was slow to accelerate.
So this was helpful trying to figure out the different pieces and how to maintain them.
Thanks for posting this, I’m changing mine tomorrow and needed this video
THANK You for this video clear and informative I have to replace mine when the parts come in I've only had my slash for a week 👊✌️
Nice video.
My Slash 4x4 LCG has been on the shelf for ages, coz of the slipper clutch. I think using the low rider Bandito 2.2 tyres kept messing it up.
Got two stripped out screws at the bottom which made me fail to fix it, but thankfully, a friend drilled them out yesterday. Tomorrow I'll take a look at the slipper clutch.
Thanks! A set of reverse thread drill bits come in handy for stripped screws!
Great video buddy !
Doing mines tomorrow
Thanks pal. Now I know why it smelled funny LOL
😳😳😳 lol, you’re welcome!
THANKS FOR THE ADVICE BRO
Good video. 👍
I’ve had the Rustler and the stampede for almost a year now, I just got my slash today and this thing seems Giant lol
LOL yes not sure why Slashes look so small in pics and video!
The Purple Bench RC I got an Xmaxx and now they all look tiny. Lol
Very good vid!!
Thank you so much your video was perfect
Good video I wish the slash would give you warning when it is happening instead of just having a great day taking it out on the second day having it stop moving 100 feet later with a grinding sound, I hope with the new parts it last longer.
I had personally given up on Traxxas Slash cars coz of this problem. Bought Diff after diff yet issue was clutch. I'll fix mine tomorrow, but I'm still not too much of a fan.
I hope if your still in the hobby you got some real tools!
Got myself a rpm metal spur gear, no issues now
Good to know! I’ll have to try that out one of these days!
The one in the description is NOT the same
Where did you get the aluminum slipper clutch assembly? The link in description has plastic.
That's the same for the stampede right
Great vid man. How do you like them Lockup SC wheels?
Thank you! They are great for rough conditions. I have the Proline Gladiators for smooth dirt and tracks.
What’s the size of that new replacement bearing you put on at 3:39 ? Thanks
How much of the spring that is connected to the slipper is supposed to be exposed?
Tanks for the viedo. I’m new to the hobby and I love but I just bought mine this past Saturday and Iv already changed three gears. I’m not hitting hard, everything aligns fine but it keep eating up the gears. Any suggestions??
from what I know, you should loosen the slipper. u wont wheelie at all and full power is delayed but at least itll do less stress to the drivetrain
also i would check ur bearings (motor, slipper, etc) and check for rocks in between teeth
@@aidan5320 I did further research on it and was able to get it going. Thank you 🙏🏽
Having trouble finding the bearing for the slipper clutch any idea part number etc appreciate
Do you know when your spur gear goes out? i dont have experience with this stuff.
It will start to sound off when hitting the throttle. Also, if it's stripped badly enough, the car will not move.
For a second you sounded like electro-boom...
😹 It's the braces LOL!!!
@@ThePurpleBenchRC lol
What's the part number of the clutch you bought?
I need to know
@@GradyEvans If you're curious that aluminum adapter is MODEL# 6893X. If you're looking for a beefier setup I got the Robinson Racing Products 7854. The Robinson Racing setup includes a hardened steel spur gear too.
@@Blakrex hey if I get rock between the spur gear and the upgraded steel one from that if I get it would it bend the motor it’s ok if you don’t know
@@ceementality Not likely. The size of rock that would get past the plastic guard shouldn't be large enough to damage the motor shaft. Any small ones that may squeeze might make small chips, but I haven't experienced any failures in the year that I've ran it. And it's been ran pretty hard.
@@Blakrex nice I was working on fixing my broken spur gear while I realized I have a bent spur so I’ll get a new slipper clutch soon
Hi. Do you know if can I buy that aluminum part ruclips.net/video/GwAcasl6AeU/видео.html separately? I mean like TRAxxxx
You wear gloves, prob moto. We know lol....