2009 Buick Enclave Coolant Temp Sensor Replacement
HTML-код
- Опубликовано: 4 апр 2020
- A common problem on this year range Buick Enclave is a failed coolant temp sensor making the computer think the engine is overheating, causing the "Engine Hot A/C Off" Message and constant High Speed Cooling Fan operation. The fix for this issue is to simply replace the coolant temp sensor. In this video, I'll walk you through the steps to replacing it as quickly, and easily as possible.
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
Thank you so much. I have a Buick Encore 2014 and they want $150 at the dealership just to tell me what I already know is wrong 🥴 you’ve helped so much !!
I got a 2012 Gmc acadia I spent more than 2 hours to put that sensor out. Appreciate your video
This video will save you 1.5 to 2 hrs. Great tips. Thank you.
I just want to say I can’t really do much with cars other then oil change and change tire but thanks to this video I diagnosed the problem and fixed it myself in 20 minutes. Big thank you great video. Now if I can find a place to fix my timing chain for less then 3500
Very nice. Super helpful - especially the socket recommendation, saved me a world of time.
Very well explained...I'm a novice and followed easily ... Much appreciated
This was a very well produced video. Thank you. I try to DIY on as many things as I can but this is certainly one task I'm gonna pay someone else to do for me. I've already sent them the link to your video. Thank you once more!
If it was that difficult , cars would cost 100000 dollars
If you can't do this one, you shouldn't do any work on cars. This is a simple job
@@adam8323Agreed, it’s not that it’s not a pain in the arse to do because it’s annoying but it’s simple and annoying. I have to do this and ordered the coolant temperature sensor today. I tested removing the connector and it’s on there as if glued on. If I can’t get some long pliers to push done the connector lever, I am going to use that technique. Looks hard too but doable. What a well explained and well shot video. Sometimes you don’t have the facility to get all the video shots you want but well done, nonetheless.
Thank you so much for your video I have the same problem yesterday , engine hot message , fans on right away and coolant overflowing from the plastic reservoir. I will change this sensor Saturday
Great video, was pretty easy after watching it. I did zip tie the wires out of the way until I was done. Thanks
Great tutorial!! Thanks for sharing
Thank you! I appreciate your video.
Great vid, needed swivel, 1/2 x 3/4 socket and thats it. I mived the peice attached abive the radiator and did it in less than an hour, including a trup to autozone.
Outstanding! Thanks so much!
Hey great video man! You explain things well and somehow managed to get the camera down in where it was beneficial. Thank you!
I did this on my 2011 buick lucerne and it still is reading the same mssg. gonna try disconnecting the battery, if not maybe the thermostat?
excellent vid thank you for postin
again i cant say it enough excellent video with excellent troubleshooting tips please keep posting vids!
Great Tutoriol
Thanks man
Thanks!
If the fans are not running I need to change that sensor?
Thanks
thanks!
I have the same problem with no check engine lights or codes help pleases and gauge is stuck in cool postion
Thank you for making this video. I replaced this temperature sensor on my 2011 Enclave CXL, but the problem persists. Any suggestions??
Waterpump
check your relays..had the same problem and ran it and it worked on its on..
@@cristinasolis1216 having the same problem! Did you change the relay or u just let it cycle on its own?
@@cristinasolis1216what relays? Only see 2 for ac under the hood (ac clutch compressor, and another ac fuse but both are good)
I have a 2012 Enslave , it doesn't say engine hot, but I can feel how hot it is. Should I try this Repair?
Same issue I have. Did it fix your issue? I also have poor fuel economy and surging.
Thanks a lot
It would be nice to know what other things need to be done!!! God... to all you guys that make these videos, do it right or don't do it at all. Sorry just frustrating to get part of the information that might be critical 😢😢. Idk. Just tired of these damn car issues.
Mine is running hot with so many codes please help
Can you video me to walk me threw this today
Hi i replaced the sensor but it keeps making the same thing any help and clear the code and it will come back again mine car is a teaverse
Same thing happened to me. Have you fixed it?
Me too hoping to find a awnser somewhere. Here or forums but nothing so far
I've have same problem on my Buick I replaced the temp sensor show same thing then I replaced the clip wire and still same thing. Any ideal what's up with the temp code came out high voltage on the temp sensor. 🙄
Did you replace the thermostat?
@@myapinion6317 yes I have.. will to my note I had to drive it around few blocks and change a relay fuse and everything started working right. Thanks for the video tho
@@tinaliscano4324 thats great which relay fuse did you change?
@@tinaliscano4324 which relay fuse did u change? Do u have a picture of it or relay location?
Wth is the point of a deep socket that only allows a bolt or nut to be inserted at the same depth as a short socket.?
It’s for bolts that are longer, not nuts that are longer. The bolt goes through the center so the deep well sockets make that possible
etc its not the problem !!!! ,,all mecanic says replace this,,replace thermostat,,check level,,,all falses !!! its need ecu reprograming..or a wire is damage and pull resistance...and gm sould do a recall for this !!!!
what eng size what eng size what eng size!
l