Detailed IAG AOS Install Guide on 2015+ Subaru STI

Поделиться
HTML-код
  • Опубликовано: 7 дек 2019
  • Does the IAG AOS Install scare you? Seem to much to handle? Well I am here to help! I did my best to explain and show everybody how to tackle this yourself. No need to pay a performance shop tons of $$ when you can just follow this video and get it done in your own garage! If you liked the video consider leaving a thumbs up :) If you didn't, please let me know what I can do to improve my videos.Thanks for watching!
    P.S This is the IAG Street AOS**
  • Авто/МотоАвто/Мото

Комментарии • 185

  • @jotaparruso
    @jotaparruso 3 года назад +4

    I just finished my installation, followed every step and i can't roll my passenger side window from the driver side control, and the front windows don't roll automatically down anymore, any ideas why this could be?

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +5

      Herbert Hernandez It is because you disconnected the battery so the controls reset. Do this, roll the window up and hold the button up for a few sec then push down and it should set it. Do this on each side, and then the driver side switch will activate for the passenger side window. Let me know if this helped you :)

    • @jotaparruso
      @jotaparruso 3 года назад +2

      @@BeeAboveAverage Thank you, it worked, great easy install video by the way.

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +3

      I appreciate that bro 😁

  • @Alonzoc16
    @Alonzoc16 4 года назад +10

    Just installed on my 18’sti. This video helped me so much. Appreciate it. Even though the install took me about 10 hours. Lol🤦🏻‍♂️

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      I’m glad I could help man, and as long as you got it all done that’s all that matters 🤙🏼

  • @JD-pp2bk
    @JD-pp2bk 4 года назад +4

    Now this is the real meaning of detailed IAG install. Thank You for this. Very easy to follow.

  • @jacobrobbins8606
    @jacobrobbins8606 4 года назад +1

    This type of tutorial sets the bar for how-to videos. Keep up the diligence and patient approach!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Jacob Robbins I appreciate that thank you very much :)

  • @jonwen5919
    @jonwen5919 4 года назад +1

    I have a 19 sti and just got this aos and I didn't want to install it myself. But after watching this video I'm confident I can do it. Thanks man.

  • @jonathanwu8013
    @jonathanwu8013 4 года назад

    THANK YOU SOOOOO MUCH!!! your video is the clearest most detailed and every other goodies on youtube. I was thinking of sending it to a shop now you just save me $300. You re amazing1

  • @oggrandmatv4268
    @oggrandmatv4268 3 года назад

    Installed on my 17 STI thanks to your video, helped a ton seeing the actual AOS install

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +1

      OG GrandmaTV I’m happy my video helped you out :)

  • @deanharris4953
    @deanharris4953 26 дней назад

    Four years later and this vid was the one 🤌🏼 only took 8 hours. Quality walkthrough

    • @BeeAboveAverage
      @BeeAboveAverage  25 дней назад

      Thank you I’m glad it helped you out 😁

  • @adamflax4225
    @adamflax4225 4 года назад

    Your video was the best filmed and narrated I have come across. The only reason why I bought the IAG was you were installing that model. Overwise, I wouldn't even attempt it. I cannot tell you how grateful I am to both of you, in helping me install my IAG AOS system. I never could have done the project without your RUclips video. There was fabricating the AOS mounts and getting different clamps, fitting and more hose. In the end, it worked out. You must be an excellent mechanic working somewhere. Amazing, you knew that AOS system inside out. Most people that I know with Subis don't even have an AOS installed. The engine looks pretty fancy now. Thanks for all your HELP!!!!!!!!!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Wow thank you so much for those kind words man😁 It makes me happy to hear my video is helping people out like yourself. The AOS is definitely getting more popular now and more people with Subaru’s should think about adding this to the car. I think it’s the fact that it can seem scary to install it and that’s why few people actually have this. Hopefully that turns around here soon and more Subaru’s get saved in the long run 💪🏼

  • @elraggedysti
    @elraggedysti 4 года назад +1

    Made it look easier than all the other vids I watched. Good job!

  • @BrettCrowther
    @BrettCrowther 4 года назад

    BEST IAG AOS install video I've seen! Very detailed along with great camera work. Thank you!!!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      BRETT CROWTHER Thanks for watching !:)

    • @AsapDayo
      @AsapDayo 4 года назад +1

      BRETT CROWTHER I agree 👌🏼

  • @watch6058
    @watch6058 4 года назад +1

    amazing video man this is the best one I could find that actually shows u the little things you need to know to get it done properly!! Bloody fingers and all trying to get those damn zip ties on in dman near impossible locations!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      luke man Thank you. I was trying to make it as easy to follow as possible. Glad you enjoyed it :)

  • @minusmartin
    @minusmartin 4 года назад

    everyone is saying it, but this is seriously the best aos install video. you and the camera man did an amazing job on this video. i’ll be installing mine on m next day off! 👌🏼

  • @jamesvang4392
    @jamesvang4392 7 месяцев назад

    You guys derserve much more subs and views. Stop feeding to the other half asses videos ppl cmon! Think I have it down now. Installing this next week. 😊

  • @calebu2579
    @calebu2579 4 года назад

    So much more detailed than the other youtubers who weren’t really making much sense to begin with so it was a no brainer to subscribe haha! I was contemplating just hiring out a shop to do it but after watching this I think I can tackle it myself! I’m guessing it’s nearly the same process as the 2011-2014 sti but I couldn’t really find an install video for this generation?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Thank’s man I appreciate that 😁 It should be very very similar with just some things being different. Here is a link for IAG’s instructions for that year frame of the STI :) Hope this helps www.iagperformance.com/v/vspfiles/downloadables/instructions/IAG/IAG-ENG-7251/IAG-CS-AOS-STI-7251-v.01.pdf

  • @valkery8068
    @valkery8068 4 года назад +3

    Best video explaining how to install AOS. Thanks

  • @davidvanderwaag6681
    @davidvanderwaag6681 4 года назад +2

    So informative. Thanks for the upload!

  • @karamirez92
    @karamirez92 4 года назад

    Bro, this is such an informative video. Thank you cuz now ill be installing the AOS myself. Much appreciated!!

  • @admstudios7
    @admstudios7 2 года назад

    Best video ever on this mod for the STI keep up the good work 💪

  • @omarmoran2759
    @omarmoran2759 3 года назад

    So much information thanku for taking your time and explain everything... Video well put together

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +1

      Glad it was helpful! Thank you very much :)

  • @kingkyong5201
    @kingkyong5201 3 года назад

    Best video to install AOS. Outstanding!

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      kyong han No I appreciate that man thank you 😄

  • @joralex
    @joralex 4 года назад +3

    BTW: (Just Subscribed) Thank you for such detailed videos, keep em coming.

  • @BluPrynt78
    @BluPrynt78 4 года назад +1

    Gonna try this next weekend. Thank You! 👍🏽

  • @ELSti
    @ELSti 4 года назад

    Great video. Used it as a guide to install my aos on my 19’

  • @BushidoPhoto
    @BushidoPhoto 4 года назад

    I installed this AOS on my 2019 STI after having the car for only 3 weeks. It was totally worth it. No more oil in the intercooler.

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      One of the best mods you can do to these cars 🙌🏻

  • @lukeeluciano
    @lukeeluciano 4 года назад +1

    Best install video...now I can install mine. Just subbed

  • @josefierro3506
    @josefierro3506 4 года назад +1

    If you ever wanted to upgrade your turbo I got 1 of these in mine . Its just a hooked up cobb 20g . You need a 3inch inlet tho . All stock placement

  • @David-wy7yh
    @David-wy7yh 3 года назад

    Nice vid man!

  • @JeremyERevo
    @JeremyERevo 4 года назад +1

    Great video man! Subscribed!

  • @jesusmiranda2463
    @jesusmiranda2463 4 года назад +1

    Amazing video man now i can buy my and installed myself

  • @3dsmackdown
    @3dsmackdown 5 месяцев назад

    Good video, filmed well. Good camera work in noodle town. I do however get a hint that the presenter has been drinking a bit of suds!

  • @hgp7605
    @hgp7605 4 года назад

    Definitely one of the best videos out there for this install! Did you end up having to bend any brake lines to get the unit itself to fit?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      H Gp Thank you so much that means a lot 😊 I did have to bend the brake lines back a little bit for the AOS to fit and I forgot to add that clip in by accident and realized after the fact 😓

  • @wigbertrosario8045
    @wigbertrosario8045 4 года назад

    Awesome, of any video this is the one better explain

  • @ric9982
    @ric9982 4 года назад

    Thanks man I just did this today with your vid. The hardest part for me was to put back the intercooler lmao. Keep it up. 👌

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      That dang intercooler, it is truly a pain 🙄 I’m glad you liked the video and it helped you out 😁

  • @31Kittystyles
    @31Kittystyles 3 года назад

    Very nice. Thanks.

  • @sugoiwrx2641
    @sugoiwrx2641 4 года назад +3

    Thank you very much sir!!! Got mine installed without any issues thanks to your video. Appreciate it 👍👍
    One question though. How did you install the intercooler after taking the bottom piece apart?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Sugoi WRX I’m glad my video helped you out :). And you pretty much have to shove your arm down under neath the inter cooler from each side while trying to tighten those bolts down. It’s a pain in the ass and after a while of struggling I was able to do it. If I remember you just have to get the correct angle with your arm and push some things out of the way while your reaching.

  • @osmansidik8383
    @osmansidik8383 4 года назад

    You are a good teacher.😎

  • @MrBRIIIAN
    @MrBRIIIAN 4 года назад

    best AOS install video out there. let me guess, you have boost creep with that intake and catless dp?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      If I were to get on it in cold weather then yes. But because of this I drive my car conservatively, because I am going to fix that issue :)

  • @gheygladiator
    @gheygladiator 4 года назад

    Finally got around to putting this in, I think you should explain which 1/2 hose goes to which port because there are 3 different lengths of 1/2 hoses. I know the longest one is the one that travels across but some people might get confused and IAG doesnt tell which one is which on their instructions manual. What did you use to pinch the coolant lines? And would it fuck it up if I pinched it? Not sure if that metal piece is just an insulation type cover or not. But after following your guide step by step, it's been superb. Tell your camera man to center the shot more 😁

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      I just used a clamp for the coolant hose and it didn’t seem to do anything bad to it, I figured since IAG said to do it, than it is ok 🤷🏼‍♂️ My cameraman is definitely getting a lot better considering he voluntarily helps me out 😁 We will strive to do better in future videos, thank you for the support bro 💪🏼

  • @TheRyanmanVideos
    @TheRyanmanVideos 3 года назад

    Oh my lord I can’t get my intercooler back in to save my life. I refuse to do the method you did because I can’t seem to get my hands underneath to tighten the y pipe back on. Very detailed video though, and it helped me sooo much getting everything together, despite that iag forgot to include a 1/2” hose

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +1

      I feel your pain bro, there is a reason that part was not on video. I was recording us struggling to put it on for like 30 min and then turned off the camera because I didn’t know how long it was going to take to get that sucker on and I didn’t want to kill my battery before finishing the video. That is honestly the hardest part in the whole install.

    • @TheRyanmanVideos
      @TheRyanmanVideos 3 года назад

      @@BeeAboveAverage haha definitely agreed, would be a bore seeing you struggle for 30 minutes trying to put it back on. I’ve done it before and haven’t had this much trouble, but it’s definitely the lines that are being a pain right now. Appreciate the well put together tutorial!

  • @Fitzsanchez
    @Fitzsanchez 3 года назад

    And the great thing on this vid is it also shows oil that’s blown by and in the intake manifold already. What this system is intended to prevent.
    Also, is your turbo seal leaking? The hot side looks wet

  • @dhanushchimalapati6033
    @dhanushchimalapati6033 4 года назад

    You really did a pretty detailed install on there!! i am currently facing the same problem with the intercooler install(turbo hose blocked by the 1/2" hose). thinking of figuring the way to put back the Top mount IC.
    The way you have done is pretty smart! But i have a quick question here -- while you have disconnected the Intercooler from its bottom metal hoses, how did you put back those 4 bolts back?? can i know what kind of tools or tricks helped you do that specific way? kindly help me with that bro!! Will be greatly helpful for me.

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Dhanush Chimalapati If I remember correctly, I had a friend push some wires away from where I was reaching my arm and I hand threaded the bolts in and then got a small wrench to tighten them. I forget exactly how I did it but it took about an hour for the bolts itself. You have to try a bunch of different angles and might have to take some things apart out of the way but I was able to pull it off without doing that. It’s a struggle man I swear! Wish I could explain this a bit more. I was so irritated trying to get it on that I put my camera down so I could just focus on it. I hope this helps!

  • @XBL2197
    @XBL2197 4 года назад

    This install is very informative! Other videos out there are hard to follow. Quick question tho, I have Cobb downpipe heatshield, do i have to remove that heatshield and not run it?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Thank you I appreciate it :) Also are you talking about needing to remove it to do the AOS install? If so, the answer is no you don’t. The reason I don’t have a heat shield is because it won’t fit around my aftermarket invidia downpipe. But if you have a heat shield on currently and only doing the AOS you wouldn’t have to remove the heat shield. Just make sure you route the hose properly around it :)

  • @Jabbazuki
    @Jabbazuki 2 года назад

    I just did this last night and putting the top mount intercooler back on took me an hour by itself... LOL

    • @BeeAboveAverage
      @BeeAboveAverage  2 года назад +1

      It’s a huge pain in the ass for sure 🥲

  • @jonathanzaragoza7603
    @jonathanzaragoza7603 4 года назад

    Question, which IAG did you purchase comp or street ? BTW great detail on explaining the install ! I plan to do it myself with the help of your video

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Jonathan Zaragoza This is the street version. Sorry I should have clarified that in my video. And thank you man :)

  • @jorgebarrientos1074
    @jorgebarrientos1074 4 года назад

    Hey man, love your videos! I have a future build, let me know if you’re located around California!

  • @mikeyrov5230
    @mikeyrov5230 Год назад

    This pretty much the same for a 2017 STI bro ? I’m going to attempt this weekend

  • @brianmoore5367
    @brianmoore5367 4 года назад

    Great video! Perhaps I missed it, but the last hose you installed at the 36:25 mark- what does that white PCV connect to? I picked up a 2017 STI that has this AOS, but the PCV on this hose is just loose and disconnected. Thanks!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      I believe that goes directly into the turbo inlet :) Sometimes after market turbo inlets don’t have this also if the car has or had an AOS on it already it could be a competition series that vents into the atmosphere instead of recirculated back into the intake track.

  • @websters5569
    @websters5569 3 года назад

    Btw. How’d you manage to bolt that top mount back to the thingy? Seems like no room to screw those 4 bolts back in?

  • @pcarobsessed9778
    @pcarobsessed9778 3 года назад

    Bro one if the cleanest tutorial. So do you clean it some times?
    Or just leave it is fine??

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      I appreciate that 😁 This AOS recirculates the oil back into the oil pan so it does not require any cleaning.

  • @josefierro3506
    @josefierro3506 4 года назад +1

    Hell yes

  • @loelmedina8588
    @loelmedina8588 2 месяца назад

    Are the heat shields necessary?

  • @Haylem
    @Haylem 3 года назад

    what a damn legend

  • @tone3973
    @tone3973 3 года назад

    12:41 is where I was stuck at lol. I was watching another instal video and buddy didn’t show it.. well just for that you get a like and subscribe thanks!

  • @websters5569
    @websters5569 3 года назад

    maaaan.. i was just gonna go to the shop and make them install it but this video gave me the courage to do it. my next step is installing 1050x injectors, do u have a video for that?

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +1

      I have a few videos of me going stage 3+ and the Cobb injectors are one of the things I installed :)

    • @websters5569
      @websters5569 3 года назад

      @@BeeAboveAverage ohh btw. does this appy on 2016 STI? AIG?

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад +1

      Yes it should be the same

  • @E85_STI
    @E85_STI 4 года назад

    Or what port on your EWg did you use to your ebcs? I used the top port i saw the online instructions that said the top is for vta im not sure if that causwd an issue

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      The top port is vent to atmosphere while the side port is routed to the EBCS 🤙🏼

  • @E85_STI
    @E85_STI 4 года назад

    Do you have a video on how you routed your ewg to your ebcs?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Should be in my Going stage 3 series videos. Look for the one here I’m doing the external waste-gate :)

  • @big_dick_entropy
    @big_dick_entropy 2 года назад

    how long did this whole thing take?

  • @adamflax4225
    @adamflax4225 4 года назад

    Hey guys. I was not able to finish the job until I got the Killer Bee dual port for the oil. I am having the same problem as you did while installing the TMIC. Too many hoses. Did you install your TMIC by removing the Y-piping and hoses from the intercooler? Then reinstall those back on the outlet. Finally, reattach the intercooler to the y-pipes? So far no luck any other way. Thanks in advance!!!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Yea that is exactly how I did it. I had angled sockets and other things that could help me out a little when putting the bolts back. I also pushed some stuff out of the way to free up space. You have to attack it at really weird angles to get the bolts back. I had to have my friend help with moving some things as I did it. Unfortunately for me my camera died towards the end there so I couldn’t record anymore. I’m sure my way is not the most ideal but it worked for me ahha. I really hope you get it on there!

    • @adamflax4225
      @adamflax4225 4 года назад

      @@BeeAboveAverage Thanks so much for the reply! I will make the attempt later today. That is definitely the only way you can get the hose to go on completely. Even though your camera died. Your cinematography was perfect none the less.
      I had a question for AIG so I had called them. They were totally unhelpful. They were surprised there were any problems. Right...
      Thanks again for all your help on my car. Now after all this time I finally get to drive it again.
      If you do a video on your front mount ETS. That will be pretty exciting to see! I am saving my money for one now.

    • @adamflax4225
      @adamflax4225 4 года назад

      Sorry, I had missed the ETS video a bunch of times I guess. But there it is. Going to look at it now.

  • @mjs_ctr8521
    @mjs_ctr8521 4 года назад

    yo! you have no heatshield? how is the routing of the hoses will be if i have a heatshield? lol damm the struggle is real reaching down there for the 2 Y’s for intercooler. good shit tho! u gave me the confidence to do this. also im assuming you only took less than 2 hours?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      I feel like the routing is the same with or without a heat shield. It’s ultimately personal preference on where to route the hoses. It took me longer than 2 hours to do the install because I was trying to film at the same time so that slowed me down. But anybody should be able to do this under 2 hours if they are just going at it none stop.

    • @mjs_ctr8521
      @mjs_ctr8521 4 года назад

      Be Above Average this iAG and cobb is exactly the same right? only difference is, the hoses got some kind of heat wrap on them on the cobbs? mann i wish u had an injectors video while the manifold is on. your videos are the most detailed out here. keep it up bro. im still haunting on doing the injectors by itself with the manifold on. thanks mann!

  • @Cnbecker9
    @Cnbecker9 4 года назад

    How different is this install from the Competition series? I know the street retains the stock PCV though..

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Conor Becker I have never installed the competition version before, I avoided it because it needed a tune and I wasn’t ready to get one yet when I was looking for a AoS. I can see if I can figure out what the difference is and if I do I will let you know :)

  • @pcarobsessed9778
    @pcarobsessed9778 3 года назад

    Professional tutorial! Do you need tune for this?

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      Thank you ! 😁 And as for the tune it is not required for the street version of this AOS.

    • @pcarobsessed9778
      @pcarobsessed9778 3 года назад

      Thanks bro!

  • @noxnyc23
    @noxnyc23 4 года назад

    I was lost after taking the bolts off the intercooler 😂

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      You got this 😆🤙🏼 I have faith in you 😁

    • @O_ADG
      @O_ADG 3 года назад

      I was lost after disconnecting the battery

  • @pcarobsessed9778
    @pcarobsessed9778 3 года назад

    Bro how did you tightent the bolt behind thr intercooler? It is for sho pain in the ass to put that back on geeezzzz

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      It was probably the most difficult thing I did out of everything that day. It took two people and a lot of awkward angles to get it in. I wish I could explain better how I did it but I’m not even sure myself how I did. 😅

  • @derrickgarcia303
    @derrickgarcia303 4 года назад

    Is the bottom hose for the breather ok to be that close to the turbo?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      I assume so since that is how IAG says to route it 🤷🏼‍♂️

  • @TYLER503DURDEN
    @TYLER503DURDEN 4 года назад

    is there any difference between STI and WRX for installation of this?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Yes there is a bit of a difference between the two installs. I do have a 2013 wrx iag aos install if that helps unless you are talking about the FA WRX

  • @JT10005000
    @JT10005000 4 года назад +1

    Will this be the same install for a 2013 sti?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Jalen Tran It would be very very similar. I know there is some extra steps on these newer models so it might be even easier for that 2013.

  • @PQR5CHE
    @PQR5CHE 4 года назад

    13:10 is that oil in the intake from the stock PCV system?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Yessir ☹️ That is why this is so important for these cars 😅

  • @derrickgarcia303
    @derrickgarcia303 4 года назад

    Bud is this the same for 2013 STI? Thanks!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      The installs are actually a little bit different :( Here is a link for the STI version of the install from IAG. Hope this helps wish I had a video on it! www.iagperformance.com/v/vspfiles/downloadables/instructions/IAG/IAG-ENG-7151/IAG-SS-AOS-08-14-STI-7151-v.01.pdf

  • @derrickgarcia303
    @derrickgarcia303 4 года назад

    Do you have to use Teflon on the coolant lines?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      Are you talking about when it comes time to pinch them off?

  • @jievyjumawan5163
    @jievyjumawan5163 4 года назад

    Would it be the same for 13 WRX?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Jievy Jumawan There would be slight differences for this car. I have a 2013 wrx hatchback myself and I’m currently in the process of selling it to my friend . He said he will do the aos when he buys the car so when he does that I will make a detailed video on that install as well. Just waiting on him is all.

  • @kelvin9439
    @kelvin9439 4 года назад

    Will the AOS void the warranty?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      I believe so because you are messing with the factory PVC system on the car :(

  • @screech384
    @screech384 4 года назад

    So how did you guys tighten the intercooler!???

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      screech384 Its not the easiest job but you have to reach your arm under the inter cooler at an angle to reach the bolts underneath. Have to push some stuff off to the side to make room for your arm. It takes a little time to find the right spot to put your arm into and the correct angle but after that it’s simple.

    • @screech384
      @screech384 4 года назад

      Be Above Average it was a pain in the ass, but I managed to get it on the normal way, I had some slack in that drain line that runs under the turbo and pulled it it back some. It gave me enough clearance to get the intercooler on! Thanks for the video!!!!!

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      screech384 You are welcome, and glad to hear you got it all figured out and finished!

  • @joralex
    @joralex 4 года назад

    So I have a problem, the crankcase vent sensor that you mention at 7:54, I don't have it. I spoke with a friend and he said its probably because the car had an Iag aos competition that doesn't require those sensors. So how or where to be exact do I plug the last top line 36:13 then?

    • @joralex
      @joralex 4 года назад

      Anyone with experiences on this?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Jorge Fournier Do you still have that port on your block that would have that hose and connection on it?

    • @joralex
      @joralex 4 года назад

      @@BeeAboveAverage no. 😔 just found the plug and it's bridged and taped. But no port.
      Is it possible to just fit both lines with the front port?

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад +1

      Jorge Fournier What car exactly is this going on? Might help me figure this out for you

    • @joralex
      @joralex 4 года назад

      @@BeeAboveAverage 2015 sti

  • @_jovian
    @_jovian 3 года назад

    how did you get the hood to close with the lines laying over the intercooler without pinching them closed?

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      I actually removed the plastic/rubber piece under the hood, gave me perfect clearance after that.

    • @_jovian
      @_jovian 3 года назад

      @@BeeAboveAverage I mean, I'm seriously not trying to be a dick or hate, but thats just installed wrong in that particular part. IDK if you cut the hose too short or just couldnt get it under there but it shouldn't be laying across the top of the IC. I know it doesn't matter for you if you installed a FMIC, but kind of fuct up that you don't address it if people with a TMIC are using this as a guide and getting the same result. Again, no offense my dude, most of the video is spot on, just really think you should have addressed that in a 'how to' video, at least something in the description. I'm sure you realized it was messed up before posting the video...

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      @@_jovian You can route the hoses how ever tf you want to. It’s where you connect them that matters. It doesn’t have to go a specific way? Or be a specific length? I’m not sure you even know what you are talking about.

    • @BeeAboveAverage
      @BeeAboveAverage  3 года назад

      And actually I was mistaken, I never removed that plastic/rubber piece when I did that install. I removed it when I did my fmic and the bov wouldn’t clear. So I actually had zero clearance issues with it when I installed it. And I haven’t seen another comment on here that had that issue. So it looks like you are doing something wrong. Maybe check out some other videos if mine is not your cup of tea 🤷🏼‍♂️

    • @_jovian
      @_jovian 3 года назад

      @@BeeAboveAverage I mean yeah, obviously all that matters is that the circuit is correct but show me another person who installed this with the lines over the TMIC and removed their TMIC shroud from the hood to compensate...

  • @5murf495
    @5murf495 4 года назад

    Help me do mine this is a pain in the ass

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      What do you need help with my man 😁

    • @5murf495
      @5murf495 4 года назад

      Be Above Average the whole thing lol

    • @BeeAboveAverage
      @BeeAboveAverage  4 года назад

      5murf Sti I promise it’s not too hard if you just take your time and take it one step at a time 😆 Follow me on insta and if you have any questions I’ll be there to assist you as much as I could brother

  • @2LonelyPlanet
    @2LonelyPlanet 4 года назад

    There people who disliked this video :P really?