Love this… in created my first LAV snippet for the CRJ Enunciators. Great videos on the LEDs and data’s monitor . Was able to program every one of them as I noticed that there was not many choice online for the CRJ.
If all your profiles are missing then you probably had one drive migrate them away for the actual documents folder and into the cloud location. If your going to use one drive for you documents you will need to make a local file location and re point your profiles location in Spad to find them in that new place.
Hello Les, i try to setup my bravo, i have a little problem, when i go to device for the bravo throtlle, i can't find the configure btn (to config. switch or btn mode). can help me . regards
plenty of videos with examples I have done .. make sure you don't still have bindings setup in MSFS if your going to do that in SPAD .. you have to remove them.. its one of the first videos in the getting started series.. IN SPAD UI -- HOME - Video guides - New User. easy to find all the videos
I love your product but will it work on the Cessna Longitude with the Garmin 5000 navigation system or is MS taking there time about allowing flight systems to fully utilize all the features.
@@LesOReilly Having a lot of trouble with the VNAV, which I can't find anything to link it to, Autopilot Altitude freezes up, along with the Autopilot Vertical Speed, I am not sure my rotary switch on the right side of my Bravo works with everything, sometimes it will work fine with the Headings, although it only makes 10 degree changes, which isn't very smoothly done.
@lvoutdoor you have to make sure if you start binding in Spad that you clear bindings in MSFS. VNAV button is not an event for what ever reason that one is an LVAR with like VNAV button in the name.
I tried to contact Spad but since I'm not a subscriber yet I couldn't get thru to them. Do you fly the Longitude and does everything work for you@@LesOReilly
@lvoutdoor yes people have control of all of those just fine. People also have all kinds of snippets for other devices and for other G3000/5000. I use it with the Longitude. HJet, Vision Jet and the TBM just fine.
Spad next application. Home tab - video guides sub tab - vJoy section will show uses - views and other use cases where you can send events in simconnect.
Hi Les, Not sure if this is the right place to ask a Kodiak 100, Bravo question. I installed your Kodiak 100, Bravo snippet dated 10/12/22 today and everything is working correctly except for the Throttle 1 Axis and Button 24 for the reverser. I tried changing some of the settings for the throttle but so far I haven't been able to make it work the way it should. Any suggestions would be greatly appreciated. Thanks again for all you do for SPAD.naXt. Bill
I just updated it again. It’s now going to work power wise but the animation won’t move of the throttle. SWS is testing a hot fix patch that will address it and this snippet will work when that comes out.
Thanks Les, that was quick. I installed this snippet and it did the trick. I am flying the Kodiak again. Will even be better when SWS issues the throttle animation patch.
Hi Les, after downloading / installing PMDG 737 as described in your video, worked one time then MSFS kept it freezing so un installed it from SPADNEXT. Just a query after installing snippets do I have to do update anything in controls. Thank you
Join the spad discord. There is a channel for the Fenix. It’s all LVAR based and you need to program it via those. Plenty of people have posted device snippets for it.
Hey man it's been a while. I just built a new PC and got MSFS and SPAD installed. I couldn't find any profiles by you. Are you not doing those anymore? Should I be importing the ones I have saved into my new install? Trying to get caught up. Looks like I have plenty of videos to watch.
I have never published Profiles .. I always published the Device Snippets Individually. You make your own Profile then for each of the devices you download them as snippets. All of your old Profiles that you had were in your Documents/spad.next/profiles folder on the old machine.. you could just copy and paste them into this PCs folder and it would carry over.
@@LesOReilly Awesome that worked. Yeah it's been a while so I couldn't remember. The snippets sound familiar. I've got to catch up on your vids. Thanks for the help.
@@LesOReilly I have removed it out of my community folder and have correctly added the SDK in the .ini, but still not see the lights on my HDG NAV etc on my honeycomb bravo
@@codyharrison7371 you did it for each version of 737 .. If you did it just for say the -700 and you are trying to fly the -800 then that won't work. Please use the spad discord and post photos of your configurations there. Works for everyone else..
@@LesOReilly Okay i will do, i have the 737-800 but i used the 737-700 profile thinking it would work the same, but it didn’t, i’m on the trial version before i purchase it. Did you do a profile for the LED’s for the 737-800? thank you for your feedback
Love this… in created my first LAV snippet for the CRJ Enunciators. Great videos on the LEDs and data’s monitor . Was able to program every one of them as I noticed that there was not many choice online for the CRJ.
Cool. Always fun to share with the greater community.
Amazing video. I cannot wait to get my Bravo and configure it with Spad, unreal what you guys have created, thank you so much!
It’s all c0nnex. I just make some videos as a user. Not the dev of it.
You're still great help :D
Les I have lost all settings on my alpha and bravo yoke and throttle even lost my default settings any way to reset everything at a loss as what to do
If all your profiles are missing then you probably had one drive migrate them away for the actual documents folder and into the cloud location. If your going to use one drive for you documents you will need to make a local file location and re point your profiles location in Spad to find them in that new place.
Hello Les, i try to setup my bravo, i have a little problem, when i go to device for the bravo throtlle, i can't find the configure btn (to config. switch or btn mode). can help me . regards
You don't need to do that anymore.. with the release of version 0.9.12 the layout is now fixed..
Hi Les - could you send me the link of the video you are referencing that covered configuring the AP knobs and switches? THX!!
In the Spad UI -- HOME - Video Guides Sub Tab ... then the honeycomb section you can pick from many for configuration specific to a plane for a bravo
Can you show me how to program the switches want to change them but so far no success thanks
plenty of videos with examples I have done .. make sure you don't still have bindings setup in MSFS if your going to do that in SPAD .. you have to remove them.. its one of the first videos in the getting started series.. IN SPAD UI -- HOME - Video guides - New User. easy to find all the videos
I love your product but will it work on the Cessna Longitude with the Garmin 5000 navigation system or is MS taking there time about allowing flight systems to fully utilize all the features.
It’s not my product. I am just a user :). What from the G5000 can you not control? All of the HEvents are exposed and in the sim now.
@@LesOReilly Having a lot of trouble with the VNAV, which I can't find anything to link it to, Autopilot Altitude freezes up, along with the Autopilot Vertical Speed, I am not sure my rotary switch on the right side of my Bravo works with everything, sometimes it will work fine with the Headings, although it only makes 10 degree changes, which isn't very smoothly done.
@lvoutdoor you have to make sure if you start binding in Spad that you clear bindings in MSFS. VNAV button is not an event for what ever reason that one is an LVAR with like VNAV button in the name.
I tried to contact Spad but since I'm not a subscriber yet I couldn't get thru to them. Do you fly the Longitude and does everything work for you@@LesOReilly
@lvoutdoor yes people have control of all of those just fine. People also have all kinds of snippets for other devices and for other G3000/5000. I use it with the Longitude. HJet, Vision Jet and the TBM just fine.
Quick question do you have a video on vJOY and when and why we may need it ?
Spad next application. Home tab - video guides sub tab - vJoy section will show uses - views and other use cases where you can send events in simconnect.
@@LesOReilly thanx taking a look.
Hi Les,
Not sure if this is the right place to ask a Kodiak 100, Bravo question. I installed your Kodiak 100, Bravo snippet dated 10/12/22 today and everything is working correctly except for the Throttle 1 Axis and Button 24 for the reverser. I tried changing some of the settings for the throttle but so far I haven't been able to make it work the way it should. Any suggestions would be greatly appreciated.
Thanks again for all you do for SPAD.naXt.
Bill
I just updated it again. It’s now going to work power wise but the animation won’t move of the throttle. SWS is testing a hot fix patch that will address it and this snippet will work when that comes out.
Thanks Les, that was quick.
I installed this snippet and it did the trick. I am flying the Kodiak again. Will even be better when SWS issues the throttle animation patch.
Hi Les, after downloading / installing PMDG 737 as described in your video, worked one time then MSFS kept it freezing so un installed it from SPADNEXT. Just a query after installing snippets do I have to do update anything in controls. Thank you
No you don't need to do anything with the controls -- but you do need to follow the PMDG videos and make sure you setup the SDK.
@@LesOReilly Hi Les can you direct me to your video for SDK, I don't even know what SDK is
In SPAD software -- HOME Tab -- Video Guides Sub Tab -- PMDG 737 MSFS -- first video
I was wondering, can I use SPAD with this video above to make it work with FenixA320 please? Any help/info would be much appreciated. Thank you! 🙂
Join the spad discord. There is a channel for the Fenix. It’s all LVAR based and you need to program it via those. Plenty of people have posted device snippets for it.
Hey Les - do you still recommend SPAD.next? I'm using old saitek hardware - but i'm mostly using in-game drivers...
I only use SPAD... the Logitech drivers only work with a fixed configuration so that has issue for me especially with add on planes..
Hey man it's been a while. I just built a new PC and got MSFS and SPAD installed. I couldn't find any profiles by you. Are you not doing those anymore? Should I be importing the ones I have saved into my new install? Trying to get caught up. Looks like I have plenty of videos to watch.
I have never published Profiles .. I always published the Device Snippets Individually. You make your own Profile then for each of the devices you download them as snippets.
All of your old Profiles that you had were in your Documents/spad.next/profiles folder on the old machine.. you could just copy and paste them into this PCs folder and it would carry over.
@@LesOReilly Awesome that worked. Yeah it's been a while so I couldn't remember. The snippets sound familiar. I've got to catch up on your vids. Thanks for the help.
i have tried everything, and i cannot get the LED’s to work at all, i’m running 0.9.15.7
Probably because you have the honey comb afcs bridge still in your community folder.
@@LesOReilly I have removed it out of my community folder and have correctly added the SDK in the .ini, but still not see the lights on my HDG NAV etc on my honeycomb bravo
@@codyharrison7371 you did it for each version of 737 .. If you did it just for say the -700 and you are trying to fly the -800 then that won't work. Please use the spad discord and post photos of your configurations there. Works for everyone else..
@@LesOReilly Okay i will do, i have the 737-800 but i used the 737-700 profile thinking it would work the same, but it didn’t, i’m on the trial version before i purchase it. Did you do a profile for the LED’s for the 737-800? thank you for your feedback
@@codyharrison7371 the Profile will work fine .. just make sure you were in the 738 workfolder.
Well maybe I won't sell my Bravo....
Why would you :) so far it's the most versatile of the affordable market...
@@LesOReilly I did, and then I just bought another. You were right.