*3 Months of design, to save 3 seconds of time. Worth it.* This was me just hacking away at different solutions, so I'm open to better solutions for this problem.
Oh my gosh, this is like the most advanced automation video/guide/journey thing I've ever watched! Especially the modifications to your switch and the desk control panel. Awesome work! My mind is blown!
Holy cow man. I have an Elgato stream deck that I have been using for macro controls but this takes it to a whole nother level. I put so much work into what I did and I still couldn’t get everything I wanted. I don’t think I have been more impressed by anybody’s work I have ever seen on RUclips in the many years I have been trying to train myself with it than I have been with what you did here. Congratulations. You have an incredibly broad and deep skill set that your average Joe sure is not going to have which makes doing this challenging. I can’t wait to dig into some of your details and see how much of it I can reproduce. Thank you and please continue To publish content and videos on the subject. I would sure like to see deeper dives into some of what you did here. All the best
@@Big_Flubba no need to use the streamdeck software, I can program everything within companion and some shell scripts, also I run it redundant with two Raspberry Pi that talk to each other and fall back if primary fails. Less bs the better
The beauty of open source development... Share what you got to and allow others to improve upon it, taking advantages of the community's improvements. YT seems to allow this in a slightly easier to sustain way (code provides content, which provides food & ☕ to continue writing code) 😀
Rather than running the 9 key off of your main desktop, have you considered running it off of a Raspberry Pi, or a windows based single board computer and using that to wake everything up? Then you would only have the power usage of the small computer running all the time instead of your full computer. Re-purposing an older NUC might be another option.
@@user-pd9ju5dk5s use a low powered pc that can run the software instead of him having 1 of his two big boy pcs always on so he can use the keypad. what more is there to explain.
But with that you lose the AutoHotKey features in the main PC. You would need to install extra software in the PCs that would run a local server to listen for commands and then activate the macros while also programming the Raspberry Pi to send those commands to the correct server IP.
@@sebastiancarreira5832 he keeps the side pc on because he needs the server running to even wake anything else. Run it of a pi and then have the server start up to control things once the big pc is up. Big pc takes over everything it needs to
Honestly this is just super cool. Not much more to say. Props and well done. I love how much effort you put into every step, from the purpose built chassis for the desk adjustment signal pass-through to the custom keycaps for the macro pad.
I use a gamepad controller for my Mac and a wired midi foot controller for hand relief, I also set up a ton of voice commands which trigger either app menu options or keyboard shortcuts assigned to those options. Voice commands are for me the easiest to remember. It's made e.g. working with audio and video programs so much easier!
Far from Steep. The hardest part hurdle is the install, picking the device to install it on and which version to install. None of which is "hard" if ya follow instructions. If ya already used to the idea of using Google Assistant, Alexa or Home Kit. Then ya already good to go. The real curve comes when customizing. Quick thing ya learn is to pick devices that are "locked" down where possible.
I just finished assembling my ideal desk. I used most of your videos as a guide. I am so happy with how it turned out. Thank you for these videos David, they really helped me out.
I'm so impressed! I came here because I'm a software engineer looking use a macropad for the first time for one-button script running and this was more than I bargained for (in a good way). I'm so excited to watch the rest of your videos and perhaps follow in your footsteps in automation!
Currently I use focus modes in iPhone to automate everything. Like network switching and turning off lights, activate sentry mode in camera etc when I activate Outdoor mode.
Cool concept! If you want the best of both worlds (in terms of responsiveness on your desktop) you could make the pico (W) make direct calls to HA (or other) and only send pc-specific keys through as shortcuts for AHK. For new users I'm pretty sure you could forward the commands via HA so it wouldn't even have to be attached to your pc!
cool project.. but....fyi... there is actually a gadget call Stream Deck that does exactly the same thing...with LED.. so you can switch out easily...and more buttons too..... and a few knobs..
look into MQTT to send commands. may be able to use MQTT to send commands from the Pi to home assistant which in turn can send the commands to whatever PC is currently being used.
I wonder if you can fix the "always on PC" problem by using the raspberry pi your keypad is connected to as the OS that controls everything instead of your PC to do this. It would be a nightmare to refactor given what you've already set up though
@@dagarou Might be challenging since his HA is a VM so he would need to pass the USB port that the keypad dongle is connected to directly to the VM running HA. Doable for sure but I'm not totally sure how locked down the HA Linux OS is..
if he has HA, the answer could be node red and MQTT. on the rpi: keypad > node red > mqtt > (remote) HA maybe there is a more efficient way than node red to get keyboard input to send it via mqtt.
Randomly came across your video and If this is content you are showcasing.. i loved it. Great blend of hardware, software and electronics engineering. Many people including myself are curious to build some custom things or automate it in a right way for ourselves to ease daily operations, we cant due to lack of knowledge or understanding. So glad to see you making it. Awesome. Subscribed!!!
Hi David, awesome integration and automation effort! Could you elaborate and expand on what/how you got the 4 port USB switcher programmed? I'm looking to do something similar but not sure where to start with this. I figured from reading through some reddit posts that I could probably use an 4n25 optocoupler for this. But which ESP controller should I use? 8266? Thanks in advance!
This is sick! I've wanted to do something similar for my setup for a while and you've really inspired me with some functions! I love the window resizing-hotkeys!
Dude!! I've done a similar thing with AHK and Home Assistant, even down to the grid-based window management. From AHK, I canme launch or focus apps, move them, change screen configuration, turn monitors off / on, change audio output, control aircon, lights, TV, type text with macros or manipulate data in my clipboard. HA can make API calls to a flask server on my PC to invoke one off scripts. Another script runs in a loop sending state information to HA so it can keep track of desktop settings. HA also monitors my dryer / washer and phone battery and tells me I need to tend to them via an RGB light. A Rapsberry Pi acts as a Zigbee / MQTT router for buttons stuck to walls around the house, which stand in as light switches but also perform other functions. One of my favourites is the single press when the bathroom light is on. It turns the light off then waits 2.6 seconds to change the audio output from my bathroom speakers back to my desktop just as I round the corner to be in earshot. I'm now working on controlling my keyboard (same keyboard btw!!) LEDs to show state information (air con temp etc). It's half working, HA tells my PC when certain helpers are updated via API calls, then it's applied using pyopenrgb but this keyboard desyncs if you go too fast, then reverts to default when it sleeps. I also want to link up my standing desk but I'm putting off assessing compatibility to avoid disappointment. Today though, I'll be reading your code. Dying to see your window grid implementation.
Any reason why you didn't consider a Stream Deck for the keypad? Appreciate they don't have wireless options but do have underdesk mounts. Feel it would have given you more flexibility on the keys you could use.
I did consider it. And it probably is the better solution for most people. I just wanted something that was more compact and close to my keyboard (make using the mute button super easy while playing games). Also I'm always looking for cheaper alternatives to these premium solutions, though in hindsight this custom keypad started adding up in price after adding the keycaps and Pico. But still significantly cheaper. And finally, I had grander plans to have it run independent of the PC, such as on a Raspberry Pi or something, which I imagine would a huge headache to make work with the Streamdeck
Beautiful solution! I bought Razer Tartarus Pro keypad for this. For now I can controll everything via Razer synapse + ahk. But after the video... I want more!
That is a really nice project with awesome outcome! I am thinking of doing something similar but I am a little bit afraid of the tight coupling between the components which decreases flexibility when restructuring the desk... So I guess that I will stick with my manual setup for some more years :D
I would highly recommend you add macros for Web tabs switching (left right tab, the pinned tab on the left etc) . I personally had it on my mouse by tilting the scroll wheel, and it was glorious. I would do your setup just for that and windows controls lmao
I love the idea behind the automations that one would typically not think of a macropad for. You might want to take a look at the Adafruit macropad 2040. Although it doesn't have a wireless connection you might be able to modify it with a battery and ble or take inspiration from its design.
I was one of those thinking 'what about Stream Deck?' but it's wired. No getting around that. Wire aside, I too spend a lot of time working on macros, page layouts, AHK scripts and IFTTT to try and streamline at-desk workflows. Feels like a waste until it's (mostly) working. Totally worth it!
Wow. I could tell that your needs are different from mine (e.g. you use a TV as a monitor while I have 4 monitors instead), but you showed some stuff I never thought about that I could use in my own setup, like the USB switch! In my case, instead of having a light bar that has controls on it, I have a Yeelight light bar that comes with its own wireless puck used to control the basic features. I have an old tablet (that I tried to sell but nobody bought) repurposed to be a dedicated Home Assistant dashboard when my PC is powered off and a Deckboard Pro client when my PC is powered on. I may look into some sort of automation thing to have it automatically switch apps when my PC goes offline or comes back online. Besides that, I have a custom Nova Launcher configuration to hide as much of One UI as possible, have an app drawer that starts on a tab that has only the apps I would use, and on the home screen, I have a layout that's intended to mimic the ambient mode on Google Nest Hub, but with an additional widget in the top right for battery status. That tablet has a limited 16 GB of storage and battery charging issues (it can't fast charge). I plan to get a MOFT stand for that. I see you use Home Assistant too!
4:08 While this is a really cool and clever way to do this, an alternative solution for others could be using a USB (this would also be applicable for HDMI) switcher with a remote, then use an IR blaster to learn the remotes signals and send them that way. Side benefit of this is this IR blaster can be used to separately control any and all other IR based devices. Personally I use an IR blaster for older TVs that don't have smart integrations or CEC, HDMI switchers, and tower fans. Love the project and definitely want to incorporate some of these ideas!!
This is great. You should do 1 video showing exactly how you setup the pico and auto hot key to use the custom keyboard. I'm trying to set this up too but I can't seem to figure out what keys i'm hitting on the keypad to know what to put into the HID website to configure it..
I know this is way off what this video is about but I'd love to see you remodel your office space. I'm interested to see how you'd completely redesign your working space.
I both want to thank you for showing me what you’ve come up with and to curse you for sending me down this rabbit hole. You have found a new fan I’ve subscribed and look forward to seeing what’s next
These are the kind of projects I love. Home/work automation and customisation. I have also used autohotkey for some of my automations and Home Assistant.
Take a look at the kb2040. It's "designed" for building keyboards. You can set up macros directly on the keyboard(it doesn't replace ahk, but can reduce its usage) You should also be able to bolt on an esp32 to do your curl requests independently of your computer to all but eliminate the need for ahk.
Loving this little project. Ordered a pico already. I’ve looked at the GitHub but I have no idea how to flash the pico (I know a bit premature but I’m going to make this work) Perhaps a tutorial on how to flash for beginners. I couldn’t find any utubes so…..
@@paulb36utube From the Github page: "The provided remapper.uf2 file can be used to flash the firmware onto the Pico the usual way (hold BOOTSEL button while connecting to the computer, then copy the UF2 file to the USB drive that shows up)"
LOL， great job! I bought built one too , but I end up reach to each switch anyway due to constant config issues, and completely give up configuring....
when i see that green H logo. i immediately remember, that is the warcraft hotkey lol. so the programmer of that thing used that tool for other applications?
aimos also builds kvm switches with a dedicated usb port for the keyboard. with this you can switch inputs via double press ctrl+1-4. you could use on of these to pass the macroboard to your other devices and your main pc has not to be on.. you would have to code your key combinations on a pico or esp32 or other microcontroller to leave out autohotkey and make it compatible with other devices without installing any software.. esps can emulate keypresses and can send http requests to REST endpoints
If there is anyone with resin printing experience, couly you print keycaps with them reliably? How does resin hold up against finger oils But it can be challanging to design the cap so you have symbols viseble
*3 Months of design, to save 3 seconds of time. Worth it.* This was me just hacking away at different solutions, so I'm open to better solutions for this problem.
This is so useful and can be used for many things. Door entry, camera, lights, TV, curtains/blinds, Aircon/Temps, etc.
Well done.
Hi David, what is the length of your desk? Is it 160 or 140? Thank you!
Automating for improved productivity is way to go! Thanks for sharing! I started using AHK recently too and it's been a game changer :)
Haha, having watched 4 minutes of the video I already got the feeling "Isn't this just a LITTLE over-engineered?" - Which is definitely why I love it
That’s the life of every home Assistant user, Man. I feel you. Incredible job! 👍🏻
Impressive combination of software and hardware skills. Kudos to both this and the production quality. A rare combo.
Basically, to watch some porn this guy had to go through ropes like he was starting a passenger airplane.
Not to mention graphic design. Those icons are very clear, clean and elegant!
This is so cool how you integrated everything. Also props for designing easy to understand pictograms for all the buttons.
Oh my gosh, this is like the most advanced automation video/guide/journey thing I've ever watched!
Especially the modifications to your switch and the desk control panel. Awesome work! My mind is blown!
A day with a new David Zhang video is a good day.
this is really impressive, you did an awesome job designing and building all of this
Nice job! I'm glad you found my desk hack useful. Thanks for the call-out.
Heyy, thanks for create the desk hack
Great idea for customization :-)
Holy cow man. I have an Elgato stream deck that I have been using for macro controls but this takes it to a whole nother level. I put so much work into what I did and I still couldn’t get everything I wanted. I don’t think I have been more impressed by anybody’s work I have ever seen on RUclips in the many years I have been trying to train myself with it than I have been with what you did here. Congratulations. You have an incredibly broad and deep skill set that your average Joe sure is not going to have which makes doing this challenging. I can’t wait to dig into some of your details and see how much of it I can reproduce. Thank you and please continue To publish content and videos on the subject. I would sure like to see deeper dives into some of what you did here. All the best
You use bitfocus companion right? Never use the streamdeck software, it sucks.
@@cyrix_1 pls explain
@Napalm Tampon Wdym? Yes, it has its flaws but it is great.
@@cyrix_1 Also companion is also a plugin on the stream deck library
@@Big_Flubba no need to use the streamdeck software, I can program everything within companion and some shell scripts, also I run it redundant with two Raspberry Pi that talk to each other and fall back if primary fails. Less bs the better
Can I just say how awesome this guys is to provide all his code?
The beauty of open source development... Share what you got to and allow others to improve upon it, taking advantages of the community's improvements.
YT seems to allow this in a slightly easier to sustain way (code provides content, which provides food & ☕ to continue writing code) 😀
@@avantgardethemighty6724 Well his code has no license so it's not open-source per se, but I am sure it's just an oversight
This is incredible! Would you (PLEASE) do a step by step video for noobs like myself? I have a 42 inch c3 and could really use this.
Rather than running the 9 key off of your main desktop, have you considered running it off of a Raspberry Pi, or a windows based single board computer and using that to wake everything up? Then you would only have the power usage of the small computer running all the time instead of your full computer. Re-purposing an older NUC might be another option.
Can you explain further?
@@user-pd9ju5dk5s use a low powered pc that can run the software instead of him having 1 of his two big boy pcs always on so he can use the keypad. what more is there to explain.
But with that you lose the AutoHotKey features in the main PC. You would need to install extra software in the PCs that would run a local server to listen for commands and then activate the macros while also programming the Raspberry Pi to send those commands to the correct server IP.
@@sebastiancarreira5832 he keeps the side pc on because he needs the server running to even wake anything else. Run it of a pi and then have the server start up to control things once the big pc is up. Big pc takes over everything it needs to
Your channel is the reason I got myself a LG C2 42" for myself n I am loving it. Now my workflow is far better. :)
Honestly this is just super cool. Not much more to say. Props and well done. I love how much effort you put into every step, from the purpose built chassis for the desk adjustment signal pass-through to the custom keycaps for the macro pad.
I use a gamepad controller for my Mac and a wired midi foot controller for hand relief, I also set up a ton of voice commands which trigger either app menu options or keyboard shortcuts assigned to those options. Voice commands are for me the easiest to remember. It's made e.g. working with audio and video programs so much easier!
That's an immense amount of work, but a fantastic end result. Great job!
Man among a sea if useless dream desk setup videos, you are videos are an inspiration.
This is some seriously impressive work, well done!
I need to get into Home Assistant. Seems steep intro curve, but crazy sweet power
Far from Steep. The hardest part hurdle is the install, picking the device to install it on and which version to install. None of which is "hard" if ya follow instructions. If ya already used to the idea of using Google Assistant, Alexa or Home Kit. Then ya already good to go. The real curve comes when customizing.
Quick thing ya learn is to pick devices that are "locked" down where possible.
👆Congratulations winner I have prize for your 🎁🎁♥️,, Text the above telegram user name to claim your prize ❤️❤️👆
Glad this works for you, too much effort to set up for most people tho 😂
Haha. It started out a simple project. And then it snowballed quickly...
@@HelloDavid I can believe it. It’s not for me, but I’m happy people can deep dive into their interests.
Where I can get those icons? By the way great idea!
I just finished assembling my ideal desk. I used most of your videos as a guide. I am so happy with how it turned out. Thank you for these videos David, they really helped me out.
I'm so impressed! I came here because I'm a software engineer looking use a macropad for the first time for one-button script running and this was more than I bargained for (in a good way). I'm so excited to watch the rest of your videos and perhaps follow in your footsteps in automation!
This is really awesome! Hyped to be subscribed to an actual maker who tweaks his setup.
I was called poor for 8 solid minutes, but watched it twice. Now I’m in debt.
😂😂😂😂😂
Currently I use focus modes in iPhone to automate everything. Like network switching and turning off lights, activate sentry mode in camera etc when I activate Outdoor mode.
Cool concept! If you want the best of both worlds (in terms of responsiveness on your desktop) you could make the pico (W) make direct calls to HA (or other) and only send pc-specific keys through as shortcuts for AHK. For new users I'm pretty sure you could forward the commands via HA so it wouldn't even have to be attached to your pc!
Can you make a series that breaks this all down for us so we can attempt to achieve something similar?
This is the epitome of programmers spending hours trying to automate tasks that only take few seconds. Loved it!!!
LoooL
or automating tasks that have already been automated by an existing product on the market.
Impressive engineering skill and project.
Man you're inspirational, love all the details you go through to make a video so clean. Would love to find more channels like yours.
cool project..
but....fyi... there is actually a gadget call Stream Deck that does exactly the same thing...with LED.. so you can switch out easily...and more buttons too..... and a few knobs..
look into MQTT to send commands. may be able to use MQTT to send commands from the Pi to home assistant which in turn can send the commands to whatever PC is currently being used.
Came here to post this.
This is hall of fame material dude, awesome.
I wonder if you can fix the "always on PC" problem by using the raspberry pi your keypad is connected to as the OS that controls everything instead of your PC to do this. It would be a nightmare to refactor given what you've already set up though
I was thinking something similar. If not then use the same machine that runs Home Assistant
@@dagarou Might be challenging since his HA is a VM so he would need to pass the USB port that the keypad dongle is connected to directly to the VM running HA. Doable for sure but I'm not totally sure how locked down the HA Linux OS is..
if he has HA, the answer could be node red and MQTT.
on the rpi:
keypad > node red > mqtt > (remote) HA
maybe there is a more efficient way than node red to get keyboard input to send it via mqtt.
Randomly came across your video and If this is content you are showcasing.. i loved it. Great blend of hardware, software and electronics engineering. Many people including myself are curious to build some custom things or automate it in a right way for ourselves to ease daily operations, we cant due to lack of knowledge or understanding. So glad to see you making it. Awesome. Subscribed!!!
Hi David, awesome integration and automation effort! Could you elaborate and expand on what/how you got the 4 port USB switcher programmed? I'm looking to do something similar but not sure where to start with this. I figured from reading through some reddit posts that I could probably use an 4n25 optocoupler for this. But which ESP controller should I use? 8266? Thanks in advance!
I’m trying to figure this one out as well
Woah. I love how you kept the functionality of the standing desk touch screen controls by adding the ESP as a proxy.
This is sick! I've wanted to do something similar for my setup for a while and you've really inspired me with some functions! I love the window resizing-hotkeys!
Dude!! I've done a similar thing with AHK and Home Assistant, even down to the grid-based window management. From AHK, I canme launch or focus apps, move them, change screen configuration, turn monitors off / on, change audio output, control aircon, lights, TV, type text with macros or manipulate data in my clipboard. HA can make API calls to a flask server on my PC to invoke one off scripts. Another script runs in a loop sending state information to HA so it can keep track of desktop settings.
HA also monitors my dryer / washer and phone battery and tells me I need to tend to them via an RGB light. A Rapsberry Pi acts as a Zigbee / MQTT router for buttons stuck to walls around the house, which stand in as light switches but also perform other functions. One of my favourites is the single press when the bathroom light is on. It turns the light off then waits 2.6 seconds to change the audio output from my bathroom speakers back to my desktop just as I round the corner to be in earshot.
I'm now working on controlling my keyboard (same keyboard btw!!) LEDs to show state information (air con temp etc). It's half working, HA tells my PC when certain helpers are updated via API calls, then it's applied using pyopenrgb but this keyboard desyncs if you go too fast, then reverts to default when it sleeps.
I also want to link up my standing desk but I'm putting off assessing compatibility to avoid disappointment.
Today though, I'll be reading your code. Dying to see your window grid implementation.
Any reason why you didn't consider a Stream Deck for the keypad? Appreciate they don't have wireless options but do have underdesk mounts. Feel it would have given you more flexibility on the keys you could use.
I did consider it. And it probably is the better solution for most people. I just wanted something that was more compact and close to my keyboard (make using the mute button super easy while playing games). Also I'm always looking for cheaper alternatives to these premium solutions, though in hindsight this custom keypad started adding up in price after adding the keycaps and Pico. But still significantly cheaper. And finally, I had grander plans to have it run independent of the PC, such as on a Raspberry Pi or something, which I imagine would a huge headache to make work with the Streamdeck
Beautiful solution! I bought Razer Tartarus Pro keypad for this. For now I can controll everything via Razer synapse + ahk. But after the video... I want more!
The feeling when everything worked must be incredible
That is a really nice project with awesome outcome! I am thinking of doing something similar but I am a little bit afraid of the tight coupling between the components which decreases flexibility when restructuring the desk... So I guess that I will stick with my manual setup for some more years :D
we missed you!!!
I would highly recommend you add macros for Web tabs switching (left right tab, the pinned tab on the left etc) . I personally had it on my mouse by tilting the scroll wheel, and it was glorious. I would do your setup just for that and windows controls lmao
Really impressive how much functionality is in that device. Thanks for sharing what worked and importantly, didn't work.
I love the idea behind the automations that one would typically not think of a macropad for. You might want to take a look at the Adafruit macropad 2040. Although it doesn't have a wireless connection you might be able to modify it with a battery and ble or take inspiration from its design.
Damn bruv, I thought this was another first world problem but the utility here is real. Impressive!
Did you use a template for the key labels?
this is awesome but looks too complicated for me to attempt
Lots of hardwork I could see!
I was one of those thinking 'what about Stream Deck?' but it's wired. No getting around that. Wire aside, I too spend a lot of time working on macros, page layouts, AHK scripts and IFTTT to try and streamline at-desk workflows. Feels like a waste until it's (mostly) working. Totally worth it!
Elgato Stream Deck + (plus) with the adjustable knobs
So what's the purpose of the back light and the screen light? I spend 7+ hours every day at my monitor and I wonder if I'm missing some trick
Wow. I could tell that your needs are different from mine (e.g. you use a TV as a monitor while I have 4 monitors instead), but you showed some stuff I never thought about that I could use in my own setup, like the USB switch!
In my case, instead of having a light bar that has controls on it, I have a Yeelight light bar that comes with its own wireless puck used to control the basic features.
I have an old tablet (that I tried to sell but nobody bought) repurposed to be a dedicated Home Assistant dashboard when my PC is powered off and a Deckboard Pro client when my PC is powered on. I may look into some sort of automation thing to have it automatically switch apps when my PC goes offline or comes back online. Besides that, I have a custom Nova Launcher configuration to hide as much of One UI as possible, have an app drawer that starts on a tab that has only the apps I would use, and on the home screen, I have a layout that's intended to mimic the ambient mode on Google Nest Hub, but with an additional widget in the top right for battery status. That tablet has a limited 16 GB of storage and battery charging issues (it can't fast charge). I plan to get a MOFT stand for that.
I see you use Home Assistant too!
This is epic man. I love it. Its such a flex to anybody who comes over
My god I don’t think this channel knows how to not make useful content. It’s crazy how everything he puts out is great.
This is one of the best videos of it's kind.
4:08 While this is a really cool and clever way to do this, an alternative solution for others could be using a USB (this would also be applicable for HDMI) switcher with a remote, then use an IR blaster to learn the remotes signals and send them that way. Side benefit of this is this IR blaster can be used to separately control any and all other IR based devices. Personally I use an IR blaster for older TVs that don't have smart integrations or CEC, HDMI switchers, and tower fans.
Love the project and definitely want to incorporate some of these ideas!!
This is great. You should do 1 video showing exactly how you setup the pico and auto hot key to use the custom keyboard. I'm trying to set this up too but I can't seem to figure out what keys i'm hitting on the keypad to know what to put into the HID website to configure it..
Incroyable, bravo. Ce n'est pas à la portée de tout le monde mais je n'ai pas de mot pour décrire mon admiration. Gg
So at first I thought “this is going to be ridiculous”… by midway through I was sold. This is really impressive. Love it.
Truly a programmers way to solve a problem. Thanks for all the videos, its always nice when you post something new and interesting.
love love love. I am saving this video. I am definitely gonna implement this
so pleased you did this, AHK has been my go-to for automating dumb things to make them smart
Holy crap man. You're a true wizard. Amazing project.
Have you not seen the stream deck XL? You can do all this with hot keys and more
Very cool project. This is the exact content I come to RUclips for.
Such a first world problem. Such a first-class solution
Very good idea, i plan to do the same with secondary keyboard without numpad, thank you mr David.
You have made this look so easy.. respect man.
Dude, this is my new Dream Setup.
Now this is a truly meaningful setup upgrade, this is brilliant.
I know this is way off what this video is about but I'd love to see you remodel your office space. I'm interested to see how you'd completely redesign your working space.
I both want to thank you for showing me what you’ve come up with and to curse you for sending me down this rabbit hole. You have found a new fan I’ve subscribed and look forward to seeing what’s next
I used a library called Interception to make 2 of those keypads into one full split keyboard.
I would have intergrated this into the desk with radio buttons, but having something you can remove is great! Love the project
These are the kind of projects I love. Home/work automation and customisation. I have also used autohotkey for some of my automations and Home Assistant.
Take a look at the kb2040. It's "designed" for building keyboards. You can set up macros directly on the keyboard(it doesn't replace ahk, but can reduce its usage)
You should also be able to bolt on an esp32 to do your curl requests independently of your computer to all but eliminate the need for ahk.
Loving this little project. Ordered a pico already.
I’ve looked at the GitHub but I have no idea how to flash the pico (I know a bit premature but I’m going to make this work)
Perhaps a tutorial on how to flash for beginners. I couldn’t find any utubes so…..
Press the button on pico, connect to your PC via USB and copy your image file for poco to use during boot. Dead simple.
@@Spoonuk666 Just not sure which files in the SRC folder in remapper.
@@paulb36utube From the Github page:
"The provided remapper.uf2 file can be used to flash the firmware onto the Pico the usual way (hold BOOTSEL button while connecting to the computer, then copy the UF2 file to the USB drive that shows up)"
LOL， great job! I bought built one too , but I end up reach to each switch anyway due to constant config issues, and completely give up configuring....
That’s really nice. I need to find or implement a similar solution for my standing desk.
This one is the sickest macro pad ever! Thanks for sharing David
this is just on another level. I wouldn't know where to start!
Great job! Now all you need to do is go back in time and invent this before StreamDeck.
when i see that green H logo. i immediately remember, that is the warcraft hotkey lol. so the programmer of that thing used that tool for other applications?
a video about home assistant setup ? pls
A custom keypad with an SBC could also sync rgb leds for each key that would allow you to have indications for turned on or off
Pro tip with any kind of new programming - if youre getting errors, feed it into chatGPT and get it to solve it for you. it’s mind blowing.
Fantastic Video! I'd love to see a separate video on the standing desk passthrough controller build.
aimos also builds kvm switches with a dedicated usb port for the keyboard. with this you can switch inputs via double press ctrl+1-4. you could use on of these to pass the macroboard to your other devices and your main pc has not to be on.. you would have to code your key combinations on a pico or esp32 or other microcontroller to leave out autohotkey and make it compatible with other devices without installing any software.. esps can emulate keypresses and can send http requests to REST endpoints
Always respect going all out and putting in the work when you have a very specific set of requirements to get just what you want out of something.
Wake up babe a new David Zhang just dropped
Amazing. At some point these devices will come with an API so they can be hooked up to what ever.
Was just watching some old videos wondering when the next one would be. Great surprise on a cold winter day!
This is very cool, I would be very interested in seeing a retrospective on this project and how much you use it to this day.
If there is anyone with resin printing experience, couly you print keycaps with them reliably?
How does resin hold up against finger oils
But it can be challanging to design the cap so you have symbols viseble
love "but i found this github page..." such relatable content
Thank you for share these kind of life hacks, they are very helpful…. would you mind giving us the size of your table?
Did you consider a stream deck for this?
Wondered the same
@@cerberes it seems a lot of extra work for something that is already available. 🙂 I am using a streamdeck for many functions and I love it!
Really impressive! Quite a few little nuggets of inspiration for a few projects here