I Waited TWO Years To Build This...
HTML-код
- Опубликовано: 23 июл 2024
- It was a LONG wait... but my gosh, it's gonna be SO worth it...
ADVENTURE CHANNEL: @donandclara
SUPPORT THIS CHANNEL:
/ claraswoodshop
CONNECT WITH ME:
Instagram: / claraswoodshop
Facebook: / claraswoodshop
TikTok: www.tiktok.com/claraswoodshop Развлечения
Awesome job on the duct work! The asian squat in the attic made me giggle. I find myself doing that a lot when cutting on the ground with a miter saw 🤣
Asian squat is the perfect technique for low to the ground work 🤣🙌
Great job! Such a huge project and so beautifully executed. Respect! 😎🤘🏼
Thank you so much!!! I appreciate that! 🙏🙏🙏
@@ClarasWoodshop One day I will have something like this! And it will be gamechanger😃
It most definitely will be!
After watching, I realized there are three standards of measurement - metric, imperial, and eyeball. 😁
Just a quick note on the weight limits for things such as anchors. The rate isn't even what they'll hold; it will hold much more. They do this for safety. I'm not exactly sure the way that anchors are done, but if you look up sheer strength for screws and bolts they are rated for 40% of their estimated strength. This means it will handle 2.5 times more than what the rating suggests. This gives you plenty of wiggle room.
Lmao damn right!
Awesome job, strong and full send functional. You deserve a cold one!🍺
Wire & d rings👍. Always over due the wall anchors!
Exactly my feelings!!! 😁😁
Your patience is absolutely amazing!!! 💚💚💚💚💚
😁😁😁 Thank you for appreciating it!! I think I seem much more patient in the video than in real life 🤣🤣
Very impressive and well thought out.
Thank you so much!!! 😁🙏🙏
Good stuff. Dust collection is a big commitment and I'm glad it's working out for you
Thank you so much! I agree - there’s a certain sense of permanence once you decide to embark on setting one up! I haven’t had much time with it yet but I feel pretty confident about it :-)
Very nice! Love the concealed and sealed ducting shroud!!!! Will implement this one day when I ever can get a shop put together!
You might want to check your blast gates. Some looked backwards if they are similar to what I have. That black knob tightens the blast gate shut, if you have it backwards you will lose many cfm’s! Just take a closer look, you’d be surprised at how much more efficient and effective your system can be by correcting blast gates direction. Good luck
Noted! I’ll double check once I get back! :-)
Excellent work again, Clara! I'm with you, I'd rather over-engineer something than say it's good enough as it is. Of course, you had to remind me that I need to install some kind of dust collection system in my garage/workshop, you brat! I'm always happy to see your new videos posted, so I can pick on you a little bit. I hope everything is wonderful with you and your partner. Please take very good care of yourself and have an amazing week.
Camvac when it’s time for higher suction. It’s a heck of a system
Noted!!
I like your attention to detail and perfection. Your ducts look great.
Thank you so much! I’m glad you can appreciate that side of me! :-)
great attention to details, agreed.
Thank you!!! I appreciate that! 🙏🙏🙏
Such quality!
Thank you so much!! 🙏🙏🙏
Maybe you could put the dust collector in the attic and run a duct through the ceiling. Might not be practical but it would give you more space and less noise.
I would’ve loved to do that and almost did, but in the end I decided it was a little bit too much of an investment to do lol.
Since the dust making it to the “bag” will be minimal, I cut mine smaller to not take up all that space. Well done
That’s a great thing to do - I am planning to make a little tweak on the dust collector first before I start to do that :-)
It's all about the aesthetic final look, great job Clara Thanks for Sharing... hmm is there gonna be another big tool delivery, that's going to need suction?
No big delivery any time soon :-) There are big projects though!
Nice work!
Thank you! 😁🙌
That feeling when you can walk into your shop and breath easy 🤌
Exactly!!!! 🤌🤌🤌😆
That first spare Y-fitting would make a nice place to put a floor duct that you could sweep dust into with a broom. Nice project.
Clara, your dust collection system looks very professional. Great job.
Thank you so much, Keith!! 😁🙌
I love the boxes to protect not only yourself from spiders, but the tubes from being pinched and creating sharp edges! Your attention to detail is really paying off and one of the things I love about watching you create, even if the creations are from a utilitarian stand point :)
YESSSS!! Appreciate you for noticing those details 😁🙌
Awesome instruction and layout. Thanks for sharing and I am praying that the spiders stay away from your shop!
Thank you so much!!! I appreciate you commenting and I hope the spiders stay away too! 🤣🤣🕷️🕷️🕷️🕷️
Cool build
Thank you! 😁🙌
The pocket screws in the ceiling rafters is a great idea! Didn't have pocket screws quick jig back when I did construction back in the late 2000's.
Cool to hear about how tools are continuing to evolve and change 😁 Now if you ever need to use it, voila!
Great video. Awesome fabrication. Mahalo for sharing!❤
Thank you so much for appreciating it, Garage Monkey San! 😁😁
I saw that you made a diferent “case” for the clamps… can you do a short video or… more information on it. It seams very nice. Thank you
I need your new unique woodworking so we get new ideas!
😁😁😁 No worries!! Many woodworking projects to come later this year!!
Great video Clara dust collection that is something I’ve been looking at for my tools. So thanks for sharing
Absolutely!! And thank you so much for appreciating the share! 😁😁
good job. im just wondering if the duck's are galvanized steel, you must wear a respirator mask will cutting it. the fumes are highly toxic.
Nice to see the long straight run into the cyclone inlet!
Thank you so much! I like it too! 😁😁
Thanks for the story, Clara
Thank you for watching!!!
A small suggestion, if you get a smaller chip collection bag on your dust extractor you can reclaim that unusable bit of the work bench/miter station. With the 2 stage system, you shouldnt be filling the bag very much so you can get away with the shorter bag.
It’s a great idea :-) I am planning on doing that after I make one more little tweak to my dust collector 😁
Jay Bates puts a magnet on his blast gate reaching stick so he can leave the stick on the blast gate and ease opening.
I want to hang a shelf for very not heavy toiletpaper storage between a drywall and a solid brick loadbearing wall and after buying every type of wall anchor at my local store, I still think I'm going to just hang it onto the brick wall and leave that shelf floating in the air 3mm from the drywall without touching it. 😅
Nicely done. Usually almost none invest time making it so tidy, just barely functional.
Hahahaha, yesssss - it makes “more sense” to prioritize the production but I wanna do things differently 😁😁
You could be the Marie Kondo of woodworking shops. Lol😂. All jokes aside Clara great job. So proud for you that your setting up shop for efficient work environment
Thank you so much, Steve! Marie Kondo's a pretty big name to live up to but I'll see what I can do! 😁🙌
❤ awesomeness
Thank you, Erik!!
Super professionell gemacht, nicht wie die anderen mit dem Kunstsoff Mist der total statisch ist. Habe großen Respekt vor Ihnen was Sie so alles leisten. Echt Klasse. Danke fürs Infomative Video. Freue mich schon auf das nächste Video.
Liebe Grüße aus meiner Meenzer Bastel Bude mini YT Channel Germany.
Bleiben Sie mit Ihren liebsten gesund.
Why on earth did you get the miter saw with Batteries? Because it does look like, that it's in a permanent position.
Lezgooooo
Thank you so much!! 🙏🙏🙏
Nice job as always Clara, this project really sucks! Sorry, it was too easy....I'll grab my coat on the way out😂
🧥 Here’s your coat! 🤣🤣 It’s totally fine! I love puns! Random side note, I heard the show, Bob’s Burgers was a paradise for puns but I haven’t seen it yet lol.
Why are you using CA glue along with the wood glue when you are clamping the joint together anyway?
I was basically being impatient with holding it for the five seconds and most likely moved on to another step before coming back to it. I did a lot of jumping around for the project and for the video made it more linear at one point to save the headache lol.
Awesome job on this video Clara! You look so beautiful and tomboyish in those green overalls! 😊 your not afraid to get rusty no pun intended 😂 and put metal pipes together! Keep up the goodwork with your videos! 😊 I like you 50 out of 10! 😍
Thank you so much!! 😁🙌
@@ClarasWoodshop Your Welcome!! 😁
Do you have solar panels on the roof?
I do not :-)
It's the type of anchor you are using. Those plastic ones suck. Get the toggle bolt anchors they are your friend
Noted!!! 😁🙌
이렇게 매력적인 분이 목공을 하시다니...보고만 있어도 기분이 좋아져요~^^
I don't get it why you don't have over 500k subs yet...
🤣🤣 Hopefully I’ll get there before I become a grandma, lol!
@@ClarasWoodshop I think you are too cool for RUclips ;) Are you working in the USA? Greetings from Germany
Yes! I am in the USA :-). Happy to hear from you!
For the life of me I cannot figure out why this foam tape is necessary on a box with three 'open' ends. Why not just skip the foam tape?
All those open ends are gonna be closed :-). There are a few tiny things I have to finish up like that but I can’t get to it until after May 1st. And I agree, the foam tape is over the top - I just wanted to “extra seal” it for some reason, so I did. 😌
@@ClarasWoodshop is it only to keep out spiders and what not?
Pretty much 🤣🤷♀️
When I posted enjoying this video I forgot to some advice. Despite what the RUclips brain trust may tell you DO NOT waste your time making/posting shorts. NOBODY watches them. Viewers want to see quality content in long form videos not 30-45 sec nothings. You will lose subscribers you have and new ones will be few. It’s better for RUclipsrs to post nothing than posting video blurbs. Just a word to the wise.
I appreciate your words of advice! I’ll keep it in mind :-)
Pay attention men: you're easily replaceable with a stick.
BAHAHAHA! Tell ‘em!!! 😆😎
🏡🪚🛠
🫶🏻🫶🏻👍🏻👍🏻❤
April 8 Moon Malam 🌕🌖🌗🌘🌔🌓🌒🌑🔭
😁🙌
Unsubscribing due to your sponsors. I don't want to see political ads from the current administration.
Woah… I’m pretty sure I have no control over who puts ads on my videos? If you think it’s me though, I understand.