Ruger Mark II 22 LR Pistol Disassembly Assembly
HTML-код
- Опубликовано: 4 ноя 2012
- Contents:
Disassembly...0:40
Bolt, detail Bolt...3:20
Bolt, reassemble...3:50
Cleaning...4:50
Assembly...5:45
Hammer Strut Trick...7:00
How to disassemble and reassemble the Ruger Mk II 22LR pistol. This is very similar to a Mk III pistol. 
Спорт
I have not fired my Mark II in a couple of decades. I took it apart to inspect it, and the last trick you showed for turning the gun upside down and aligning the strut did the trick. I was not able to pull the hammer back before that. So many years later and this video still in demand!
Easiest, fastest instruction video ever! Made a dreaded job a breeze! Thanks
I’ve had a slab side for probably 20 years. Takedown and reassembly isn’t really so terrible once you get used to it and it’s certainly not impossible. After you do it a dozen or so times, it’s just another gun cleaning routine. Kind of fun actually, knowing that you can do this without thinking twice while so many others are intimidated.
Wow I had mine for 10 yrs before I sold it and the whole reason I did was taking apart to clean it. Had to go to a gunsmith twice for re-assembly to bad this video wasn't around in 2007. Great video and a big help to Ruger community
Yours is the best on the Ruger MK II field stripping. Especially the trick at the end. Now I am going back out to the garage and try to get mine put back together, now that I understand what to do. THANKS A LOT. You have done the MK II community a really good service.
You make this look sooo easy... Bought mine back in the 80's and I still have nightmares of cleaning it... I recently started shooting it again and I'm afraid to take it apart :) after watching this , well there is a small chance I might do it :)
Dude thank you so much for this! I was having so much trouble putting it back together, watched like 3 different videos and they all said "just put the pin in and fold it over" nobody explained the hammer strut having to be in a certain position. I couldn't cock the hammer back at all until I watched your video. You're a life saver!
Thank you, excellent video. Thanks for showing the tricky part.
I have a MKII just like that. In 30 years I have never once taken it apart and don't ever plan to unless it stops working. Fantastic gun, put thousands of rounds through it.
+John .Dlugos I've had mine for 35 years now and prior to today, I had only ever taken it apart for cleaning once. I had such a difficult go of it back then, that I hadn't cleaned it again before today. Mine finally started to have cycling issues after several thousand rounds. As long as you closely follow this video, I doubt you'll have any problems when you take it apart. I was shocked that the gun functioned at all; it was so horrible inside I went through dang near half a bottle of Hoppes #9 and half a can of Gun Scrubber to get it clean.
I've owed my MKII for 20+ years. I cleaned it once and struggled to put it back together. I shot it the other day and dreaded cleaning it. Thank YOU for this video. I am no longer apprehensive about breaking it down. 🙏
This is THE BEST video when it comes to explaining how to reassemble the gun. Good job!
Wow, I just spent over an hour trying to reassemble my Ruger Mark II pistol. I looked at several video's with no success. Your step by step instructions made it possible for me to complete. My problem was I failed to squeeze the trigger towards the end, until you mentioned it. This is a very difficult gun to field strip, but with your help, it was possible. Thank you very much, you are a life saver.
Same
My grandfather left me a mk 2 after he passed. I have very fond memories of plinking around when I was a child, however I’ve never seen it cleaned. Your video is exactly what I was looking for, and will allow me to keep this memory we shared alive for decades to come.
This process can be a nightmare if you mess up the strut. I've watched a few videos on this, and this is by far the best and simplest. Thank you.
I purchased my mark II in the 90’s - today it still looks and fires like new
Great target pistol
Excellent video
Explained how to disassemble and reassemble very well
Easy to follow your instructions
Thank you
Best most accurate gun I own, can't tell you how many rounds have been run threw it !!
Thank you. That the first time someone mention the hammer strut need to be in the middle position. I'll been fighting to put this together for an hour.
Great video. I've had my mark ii for years and never field stripped it because I didn't want to take it to a gunsmith. I was able to do it on the first try after watching this. Piece of cake.
Great video. Helped me disassemble and clean my mother in law’s old Ruger. She passed couple years ago and my sons love shooting it because it was hers. We had been having feed issues. Good cleaning resolved it. Thank you again.
I have this pistol and a Taurus 92 stainless which also works brilliantly. I can take the 92 apart in 4 seconds without tools. One safety switch mechanism pushed and turned by finger and the barrel, spring and everything else comes apart.. Works of art...
I have a Beretta 9, which is probably the same as your Taurus. Yes, makes you appreciate modern handguns.
The simply design of Ruger Mark 2 is so elegant and beautiful
Thanks! Just did a complete cleaning of my Mark II for the first time. Wouldn't have attempted this without this detailed video.
Have had my mark II for several years and shot it sparingly because was always told how difficult it is to reassemble after watching your video I have confidence in putting it back together
Wished I saw this year’s ago, I guarantee it’s going to get more use now lol, thanks , I was even thinking about trading for a IV ,but not
Now , may go ahead and have barrel threads added!! Pew pew
These Mark II's are awesomely reliable. I compete in Steel Challenge matches in a variety of classes, including rimfire class. I use a (basically "stock") Mark II Slabside, while all these folks are sinking dollar after dollar in 22/45's and much more expensive pistols. When you look at the scores, me and my Mark II are in the upper echelon of competitors. I wish I could say we were a #1 team, but while the Ruger Mark II does its job, the shooter often leaves a much to be desired. Though I like the release lever on the Gen 4's, which is L O N G overdue, I think I'll stick with my old faithful Mark II. Good instructional video.
Fantastic job on the instructions, easy to see, easy to under stand, easy to hear. I like that you didn't add a lot of talk. Great job.
Excellent and very helpful video. Wish I could have seen it 15 years ago when I bought my MK II .
After an hour of struggling with the strut, I finally decided to look it up. THANKS!
Outstanding video. Thanks for pointing out all those "issues" that can be a problem with these great guns.
Great video plain, simple and easy to follow. It helped me finally fully clean my favorite piece.
Best treatment and photos of the HS I've seen! Stainless steel makes it visible.
Watched 3 videos, yours is by far the best. No one else explains how to line up that pin in the middle slot.
Thanks, I'm glad you liked it, and that you got your pistol back, too.
Finally a good explanation of how to lineup that final pin in the last reassembly step. Thanks!
just wanted to say THANKS! you are the ONLY person that mentions the need to have the hammer strut is aligned in the middle position. only until i found your video was i able to reassemble mine. AWESOME attn to detail!!!!
THANK YOU for this excellent video! About 25 years ago I inherited my dad's Mark 2 Target pistol, but had it has been stored away and not working properly. With help from your video I was able to (finally!) take it apart and give it a MUCH-needed cleaning and oiling, got it back together, and now everything seems to work smoothly and perfectly. I can't wait to take it to the range and shoot it... it's been far too long since I have shot it! (since my dad passed away 25 years ago.) I think he'd be very happy to see me shooting it again. Thanks so much for your very clear and easy to follow instructions. Best video I found for this gun.
MsJM Sounds like a special gun to go shooting with.
+bgallaher77 It is an awesome gun to shoot, and yes, I'm really happy to have it. I now know why my dad liked this gun so much - it is just dead-on accurate and really fun to shoot. I can consistently hit bulls-eyes and keep 1 to 2-inch groups with this gun. I only wish I was as accurate with higher caliber guns! But I'll get there eventually. Whenever I go to the range, I now always start and finish with this gun, because then I start and end with great results (even if the middle isn't yet where I want it to be!). Thanks again for the great video... just watched it again for another cleaning. Please don't ever take this video down! :)
MsJM cool thing that it doesnt kick back that much too eh?
Yeah, my too. I broke mine out of storage for my kid to shoot.
I've got a Mark I and Mark III. This is by far the beat video for disassembly/assembly out there! Very well done.
Thanks so much for a great video bgallaher77!!! I belong to a pistol league and shoot my MKII every January - March. Then the gun sits for 9 months. Too much time for my old mind to remember all the little tricks to reassembling it. The manual is helpful but your video makes the job so much easier. A word of caution for MKII owners. Always make sure the firing pin retaining pin is in the bolt prior to sliding the bolt into place. If the pin fall out and you don't notice, the first time you pull the trigger you will damage the pistol. Unfortunately I know this from experience. Had to take it to a gunsmith for some machining to get it operational again. Other than the headache of breaking these pistols down and reassembling them, they are a great pistol. Extremely reliable and accurate. Once again, thanks for a great video. I've used it 3 years in a row. Wish I could buy you a beer!
Just got my dads mark II and had no idea how to break down. this video saved my hours of pain and suffering. I was able to reassemble in just a few minutes. Thank you sir!
I watched other videos on assembly ad this is the first one that was concise, to the point and exact. I put the Mark II together with ease after other instructions failed me. Bookmarking this vid now. Thank you!
Amazing how vague the manual is for reassembly. You would have thought they'd emphasize where the hammer lever needed to be positioned.
Awesome vid!!! Owned mine for over 20 years and it was a pain to figure out assembly and disassembly of this great gun...even with the book. This vid will help a lot of people. Thanks again!!!
i am glad you gave that tip on the hammer strut getting stuck, because that's exactly why came looking for a video.
Good job; thanks so much for helping with this complicated little beast. Once you broke it down it all made sense. Many thanks.
J'ai monté et remonté pas mal d'armes, quelques fois sans les connaitre. J'avoue que j'aurais du mal à procéder au démontage remontage sans notice ou youtube! Mais bon, une fois qu'on connait, c'est pas trop sorcier! Ce qui me dérange c'est tout de même d'avoir besoin de taper sur l'arme pour sortir la culasse! Et puis un Ruger, c'est vraiment sympathique pour le tir! Très bonne vidéo!
The wood grips make it look beautiful.
Thank you for sharing this, just got a new Mark II for target and this makes cleaning it a lot easier than I have been told....thanks again!
Thank you, it has been quite sometime since I have brought out my MK ll's and this video was so helpful to re-jog my memory on how to disassemble and put it back together. Forgot about that tricky maneuver with getting it back in place! You saved the day and much frustration.
Excellent video. Clear, straight forward, easy to follow. Thanks for posting.
After mine being stored for more than ten years, this was a great vid to remind me of the tips, to give me the confidence to break her down.....
Very good tutorial video. Straight to the point, clear and simple. Thank you.
Bro it took me like over an hour fighting this gun reassembly until I saw your video. Thanks! I didn't want that walk of shame to a gunsmith lol
always had trouble with the hammer strut until i saw this video. thank you!
I'm glad you did this. I have 2 that were my fathers. That haven't been touched in 20 years. I was scared to force things and the hard part with the final was truly the confusing. The whole lever in the handle coming out and going in was hard. Had to tap it both ways. Thank you sir.
Awesome video. Was really struggling with it until I kept rewatching and like you said, I had to have the hammer strut just perfectly aligned. So I used a bent out paper clip to put it exactly in the right spot and hold the gun at an angle and it actually draws all the way back to slingshot now. And now I can dissasemble and reassemble very easily.
Thank you for the great video!
Absolutely the best tutorial for this task. Thanks
Thank you for publishing this. I am going to clean mine tonight for the first time since I bought it new in the year 1989. IT still shoots fine with no hangups. I just felt like it needs a good cleaning
Thank you! That was the easiest and best Ruger mark 2 disassemble and reassemble video ever. Got it the first time.
I bought one from a guy that was pissed off at the pistol. I bought it in pieces ( cheep) I took it home and put it back together and I still own it. He's happy and I'm happy end of story.
Great video. I inherited my Granddad's target model a few years ago (he passed in 1995, and my Grandma gave it to me later on) and have been needing to break it down to clean and strip it of old, gunky oil. Getting it apart and going through it was a fun learning experience and it made me feel close to my Granddad. Thank you for making this video
By far the best video on this subject I’ve watched.
Great pistol. I bought mine new in 1986. Still looks and functions like it did way back then.
THEE BEST Ruger Mk 2 Disassembly video on RUclips! I greatly appreciate it!
Finally a video showing clearly how to do it.
Thank you for the east to understand instructions. The print manual is lacking. You answered a number of questions and pointed out pitfalls. I appreciate this video.
Good job. A lot easier than trying to follow the instruction manual that comes with the gun.
Thank you for detailed, good lighting up close filming. So many times guys film to far away. Most of us watch on tiny iPhone/ipad screen so up close is great!!!!!
THANK YOU FOR FOR THIS VIDEO. I LEARNED A LOT MORE BY WATCHING IT. I HAVE THE GUN AS PICTURED FOR ABOUT TEN YEARS NOW. LOVE MY RUGER.
Best video I've seen yet on disassembly and assembly of the Ruger Mark II. Thanks!
Best MKII field stripping video ever. You made it easy. Thank you!
One of the best looking pistols ever made
6:46 hold the gun so that gravity is pointed down LOL. Good video. I owned one of these about 30 years ago and I never took it apart or cleaned it but back then I didn’t know really anything about guns. Now I own several firearms and I am meticulous about keeping them clean and lubricated
Thanks, great video, appreciate you going through the trouble to do this video!
Very clear and concise (with the subtitle added.) THANK YOU!
Thanks for the video! I've owned my Mark II for years, but always dreaded taking the darn thing apart.
Thanks for making this video and saving me another half hour of frustration. Damn hammer strut.
Glad I waited for the MK4
Simple yet effective weapon. Love it!
Great video with exceptional information. Agree that Ruger's Mark series pistols are great shooters and require occasional cleaning.. You made it look easy.. Thanks
Yeah, great vid. Exactly what i was looking for. Even easier in real time then you make it seem. Thank you.
Thank you, thank you, thank you !! Battled my pistol all day yesterday~~ the hammer strut was killing me. Went together first time after watching this. Fluke, perhaps but I am one happy camper :)
Excellent tutorial, thanks so much. Just bought one with a Leupold M8 2X scope attached for cheap! :)
Fairly complicated reassembly & your video is BY FAR the best on YT. Many thanks!!
Thank you for the great video. I've bought one of these pistols from a friend who needed to sell it for $200 many, many years ago. It's also my wife's favorite pistol. It's been inside a pistol rug, hasn't been used for around 7 years and it has never been cleaned. That is, till now. Didn't have to use a mallet to remove or reattach the top. Maybe I was lucky. The entire process went very smooth. Bought a low-end pistol cleaning rod from Academy. Used some old Hopps bore cleaner I still had laying around. Sprayed Rem Oil in every nook and cranny then applied some Tetra-Gun gun grease. Life is good!!
Good video. I have been frustrated putting my 22 back together. After watching your great video I took the gun apart five or six times just for the practice. Thanks.
Good instructional video on basic breakdown for general cleaning,thank you.
This video is a game changer. Direction is spot on. THANKS!
Just looked at the mark 4 the other day at a local gun shop. What a smart re design they have come up with!!! Just push a button and boom!! It comes apart!!
thank you your video was the easiest video to understand to me on RUclips. after watching several others i watched yours and finally got my pistol back together correctly.
thank you very much the first time I tried to disassemble this firearm it took me a whole day didn't know you had to turn it upside down thank God for RUclips and you keep up the good work☆
excellent demonstration and video!
I have owned 3 of these pistols plus one I have now. One was suppressed being an NFA weapon. It was effective and accurate. All of these guns are reliable but getting the assembly / disassembly is tricky at first but become easy after you do it a few times.
thank you so much - this has taken me shy of 3 hours to work out, you vid helped in the end.. even so, bloody temperamental thing.. I cant always repeat it the results..
Very helpful video and well lit and shot. Thanks for taking the time and posting it. I've bookmarked it for future use. Good work!
Thanks for the video from Argentina, very clear. I am an Mk2 competition target owner.
Thanks for the video! My dad was taking his gun apart and that clip you mentioned had fallen and it was jamming. Made me look cool when I just grabbed the gun and turned it upside down and the hammer strut got free lol.
Got my mkII new in early 90's , was able to follow instructions in the manual , no problem breaking it down n reassemble it
Never had a problem taking mine apart or putting it back together .
excellent tutorial the more you do it the better you get at it !
The pulling the trigger while it was upside down did the trick for me!!
Thanks for your video. My gun hasn't been this clean since it left the factory.
Thanks so much for this vid. Its the only vid help me get a mark II back together someone had given me years ago and I would never figure out how to get it all together. VERY good vid.
Thanks again.
Thanks a lot! Great vid, helped me making the assembly a lot easier! Good job!
One of the better videos that I have seen on the takedown of the Mark II. Thanks.
Good Job your video and explanation has been the best one of many I've watched.
I’ve got that Mk ll with the tapered barrel and those same grips. I bought it back in the late 90s and it’s still one of my favorite guns, even though it’s a pain in the ass to disassemble.