****click read more**** Thank you very much for watching and God bless **pressure gauge. amzn.to/3u7PzN1 **Teflon tape. amzn.to/3yAUABh **Silicone grease amzn.to/3f5ysqT Bible ESV easy to read amzn.to/3qshNQP Bible NKJV amzn.to/30ns322 Titan solar generator (large generator) poweredportablesolar.com/ref/48/ Go pro that i use amzn.to/2WC6WXH my wireless mic Rode wireless Go amzn.to/2WxQt7c *Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
this dude is so efficient. millions of ppl like him in this country that works clean and efficient. Without ppl like Jim this country would be in the tubes. If i were ever elected president I would create a program where people like Jim visit all the schools in the country from west coast to east and teach them good common sense instilling honest hard work. too many people look for short cuts. Then scratch their heads when things fall short!
Hey Jim. Just purchased our first family home... Has a pool with a sand filter. In NZD the pool service people want to charge NZD $570 which is USD $390. Thanks for this video mate, saved me $400 NZD doing it myself. Couldn't be happier thanks. PS - I've tried USA beer while traveling there. Here in NZ we would need four of your beers to get close to one of ours :). Thanks again and subscribed.
Doing this for the first time tomorrow, glad I clicked on your video. Immediate subscriber. Also, if your tutorials are always measured on the number of beers, I'm sold.
Awesome video! Your voice is definitely radio television level. Anyway somewhere I watched another video, and they put a sock over the center instead of tape. Make sure you take the sock off your foot. Also, big help on using the shop vac thank you so much for that! Also when I had an above ground pool, I purchased synthetic sand from Amazon. It really really filtered my above ground pool, very well. Also it definitely limited my having to backwash. Often. I live in the Southwest and the desert finds its way into your pool. But it's fine. Thank you so much. I liked and subscribed.
Thanks I think this might cure my son's pool problem he did not cover it for the winter was green with leaves and all kind of debris and I think it more than likely did the sand in
Thanks a zillion! Your video and instructions were so user-friendly I managed to change my sand that didn't filter anymore and put in some filtration glass that is more efficient and lasts much longer. You are a very good teacher!
Okay, we tried doing it with the water still in there because my husband said it was easier for the sand to travel up the hose and into the shop vac. Unsurprisingly, that just made it fill up with water that we would have to drain probably 10 times more often than we should have.
Great video! Our central pipe is not detaching from valve. Ended up lifting the laterals while trying to just replace o ring. Now looks like we will need to change 20 year old sand, so this vid helps. Any advice on removing valve from center pipe? Thanks
Installer had mangled the end of center pipe, I guess to get it to fit. We used hair dryer to expand the surround and gave it a good pull once removed from filter. All good now. Your vid gave us confidence to change sand ourselves. Thx
The best were the ball style stainless steel filters. It came apart with a threaded top. Tip it over and wash the sand out with a hose. Used muriatic acid to clean the calcium out after sand removal. I would drop a PVC fitting over the center pipe and pour the sand in. Old sand went on to the lawn.
Great video! I wasn't sure if I could change out the sand when my pool was closed for the winter, but your video solved that issue and I'm going to change it out very soon. Jim, should I change out the O-ring or just re-grease it? Thanks again for a very easy step-by-step video on how to how to do this. Paul
The blue plastic flat looking tubing, where do you find that? I could use that to replace a hose that doesn’t fit right onto my power pump but I have never seen that thin looking blue tubing
Our filter kicks sand back in pool. Bought new filter and sand and it still kicks sand in pool. What could be wrong. Great videos by the way. My daughter is trying to take care of pool since my husband passEd away this year. Pool place suggested filter needed replaced Which we did but still have same problem.
@@patwillbanks9093 If you already changed out the laterals and filter, you might not have the right type of sand. You need specific filter sand. Otherwise, maybe your new filter is defective. I can't think of any other problem that would cause sand to kick back in.
@@patwillbanks9093 If you replaced the filter and the sand and are still getting sand from the return jets into the pool, it is likely that you have an underground leak in your plumbing that is pulling in sand as it leaks water
Aloha, Jim. Turning 62 in 2 days and going back to cleaning swimming pools. Thank you for the excellent guidance. Will be following your examples. Have A Blessed Life.
Critical point made at 3:00 - "This job may be like a one-beer job...not too many beers, you don't wanna mess this all up." Thank you Sir, that made this job so much easier! Great video though, seriously - thanks for posting. The tip at 6:55 was a great one, along with the vacuum tip about moving all that sand in one go!
Again! Thanj you so much! After changing the sand, i opened the pool this morning and i noticed sand coming into my pool... do you whats probably causing this?
Same filter. My guage snapped off leaving the threaded end inside the hole. Any suggestions on getting it out. When it snapped ,it snapped completely flush
Hi Jim. Did you put a specific type of filter in your vac? I tried a contraption similar to a dust collector to hook up between my shop vac and the sand, but I'm thinking that is going to take a long time. I have 300 lbs of sand to get out. I might just go straight shop vac like you, but I don't want to chance having sand going into the motor.
Thank you Jim, that's very good food for though. I have been researching sand filters and I like the one you have. Seems like hard plumbing is the way to go. Lord Bless you and your family.
Our older Hayward filter does not have a clamp ring holding the valve to the filter. How is the valve secured to the filter and how can it be removed to replace the sand?
Success! Being an old Hayward model 710 valve assembly, it unscrews CCW from the top of the Truflo sand filter. It took about eight turns to get it off.
I reused the old sand, I created a little sluice box with my wagon and filled it with water and all the contamination floated to the top, I just tipped it and drained it off, it took about 4 times and about 15 min. Then I scooped the sand back in. Works like a charm.
****click read more****
Thank you very much for watching and God bless
**pressure gauge. amzn.to/3u7PzN1
**Teflon tape. amzn.to/3yAUABh
**Silicone grease amzn.to/3f5ysqT
Bible ESV easy to read amzn.to/3qshNQP
Bible NKJV amzn.to/30ns322
Titan solar generator (large generator) poweredportablesolar.com/ref/48/
Go pro that i use amzn.to/2WC6WXH
my wireless mic Rode wireless Go amzn.to/2WxQt7c
*Full transparency. I am a participant in the Amazon Services LLC Associates program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
TYyyyyy
4
4
3
TYyyyyy
4
4
3
this dude is so efficient. millions of ppl like him in this country that works clean and efficient. Without ppl like Jim this country would be in the tubes. If i were ever elected president I would create a program where people like Jim visit all the schools in the country from west coast to east and teach them good common sense instilling honest hard work. too many people look for short cuts. Then scratch their heads when things fall short!
Thank you for the nice comment Chris. Hope you are having a good day.
too many schools teach NO tangible skills & just turn the kids into lil "emo's".
I just changed the sand from my pool filter because of YOU sir! Saved more than $250 in service... Thank You so much!
Awesome glad I could help. Thanks for watching
Hey Jim. Just purchased our first family home... Has a pool with a sand filter. In NZD the pool service people want to charge NZD $570 which is USD $390. Thanks for this video mate, saved me $400 NZD doing it myself. Couldn't be happier thanks. PS - I've tried USA beer while traveling there. Here in NZ we would need four of your beers to get close to one of ours :). Thanks again and subscribed.
Awesome thanks Brad you are correct our beer is week but keeps me out of trouble lol.
Doing this for the first time tomorrow, glad I clicked on your video. Immediate subscriber. Also, if your tutorials are always measured on the number of beers, I'm sold.
Thanks for subscribing, glad i could help
Awesome video! Your voice is definitely radio television level. Anyway somewhere I watched another video, and they put a sock over the center instead of tape. Make sure you take the sock off your foot. Also, big help on using the shop vac thank you so much for that! Also when I had an above ground pool, I purchased synthetic sand from Amazon. It really really filtered my above ground pool, very well. Also it definitely limited my having to backwash. Often. I live in the Southwest and the desert finds its way into your pool. But it's fine. Thank you so much. I liked and subscribed.
Thank you very much for subscribing
This will be my first time taking the sand out and replacing it. Your video gave me the confidence I needed, thanks for sharing this.
Welcome glad I could help
I just did mine for the first time & it wasn't hard but it was SUPER laborious.
my pipe that connects to my laterals is cracked is that just a pvc pipe or do i have to buy a whole new lateral assembly
Sorry I’m not 100% sure I did replace my lateral once, and it really did not cost that much. Hope you get it figured out. Thanks for watching.
Good education as a dad I understand the beer measurements. One beer job. Most likely a two beer for a beginner
thanks for watching
Put a brick on the umbrella thing when you are adding the sand. Helps keeping it in place and blocks the pipe up
Thanks for the tip, thanks for watching
Thanks I think this might cure my son's pool problem he did not cover it for the winter was green with leaves and all kind of debris and I think it more than likely did the sand in
Hope my video helps you
Thanks a zillion! Your video and instructions were so user-friendly I managed to change my sand that didn't filter anymore and put in some filtration glass that is more efficient and lasts much longer. You are a very good teacher!
Awesome glad I could help
Okay, we tried doing it with the water still in there because my husband said it was easier for the sand to travel up the hose and into the shop vac. Unsurprisingly, that just made it fill up with water that we would have to drain probably 10 times more often than we should have.
Hope you got it figured out thanks for watching
Could we just use a small cup to cover pipe when pouring in sand?
Sure that would work
Great video! Our central pipe is not detaching from valve. Ended up lifting the laterals while trying to just replace o ring. Now looks like we will need to change 20 year old sand, so this vid helps. Any advice on removing valve from center pipe? Thanks
Sorry not really mine was easy. Hope you figure it out.
Installer had mangled the end of center pipe, I guess to get it to fit. We used hair dryer to expand the surround and gave it a good pull once removed from filter. All good now. Your vid gave us confidence to change sand ourselves. Thx
Awesome info thanks so much!!
You are so welcome!
The best were the ball style stainless steel filters. It came apart with a threaded top. Tip it over and wash the sand out with a hose. Used muriatic acid to clean the calcium out after sand removal. I would drop a PVC fitting over the center pipe and pour the sand in. Old sand went on to the lawn.
Those are some good tips thanks I’ll try to remember for next time thank you for commenting have a great summer
I used a spray paint cap to cover the center pipe...easy on, easy off.
Very informative I’m replacing my filter this afternoon due to a crack. I’m thinking this could actually be a 3 beer job
Thanks for watching, have a beer for me
Great video! I wasn't sure if I could change out the sand when my pool was closed for the winter, but your video solved that issue and I'm going to change it out very soon. Jim, should I change out the O-ring or just re-grease it?
Thanks again for a very easy step-by-step video on how to how to do this.
Paul
If it seems in good shape just re-grease
Thank you for sharing.
welcome thanks for watching
The blue plastic flat looking tubing, where do you find that? I could use that to replace a hose that doesn’t fit right onto my power pump but I have never seen that thin looking blue tubing
I would try a pool store. Measure what size you need.
Will taking the sand out bust a shop vac or the filter on the vac? Thank you for the helpful video. I'm about to give this a try!
Just do a little at a time. You don’t want to completely fill your shop vac
Was just about to zap that channel. Thank goodness you got around to crackin' that can open! Great video, thanks!
Welcome thanks for watching
Our filter kicks sand back in pool. Bought new filter and sand and it still kicks sand in pool. What could be wrong. Great videos by the way. My daughter is trying to take care of pool since my husband passEd away this year. Pool place suggested filter needed replaced
Which we did but still have same problem.
Could be something broke in your filter. If your laterals are cracked you can replace. If there good you might need a new filter.
@@DIYJIM
I just bought new filter and sand.
@@patwillbanks9093 If you already changed out the laterals and filter, you might not have the right type of sand. You need specific filter sand. Otherwise, maybe your new filter is defective. I can't think of any other problem that would cause sand to kick back in.
@@patwillbanks9093 If you replaced the filter and the sand and are still getting sand from the return jets into the pool, it is likely that you have an underground leak in your plumbing that is pulling in sand as it leaks water
Thank you so much for this very detailed video! Great work! This was very helpful..
Glad it was helpful, thanks for watching
Aloha, Jim. Turning 62 in 2 days and going back to cleaning swimming pools. Thank you for the excellent guidance. Will be following your examples. Have A Blessed Life.
Thank you Alan
Great job. Watched your video 1st before I do my Sand filter right now. Thanks a lot.
Welcome
I'm about to do the same job. This was very helpful. Thank you.
P.S. having a pool is great but it ain't no Anna Maria Island! 👀😁
You got that right, I would like to go back
Thank you loved the video it was easy to understand with step by step instructions ❤️.
Welcome thanks for watching
Thank you for sharing your experience cleaning the sand filter pool. It is very helpful.
Glad my video was helpful, thanks for commenting
Wish I watched this b4 I manhandled my filter to empty it 😂
Maybe next time, thanks for watching
You make it look easy !
Maybe a pain for you to work under your deck , but at least your pool system is not exposed to the elements.
Agree, but not good on my back.
I noticed some of that pool sand is expensive, like 25 dollars for a 25 pound bag and I need 200 pounds
I bought my sand a Lowes I don't remember it costing that much but everything is going up.
You must be reading my mind. Every video is exactly what I need, thanks Jim
Glad to help
Critical point made at 3:00 - "This job may be like a one-beer job...not too many beers, you don't wanna mess this all up." Thank you Sir, that made this job so much easier! Great video though, seriously - thanks for posting. The tip at 6:55 was a great one, along with the vacuum tip about moving all that sand in one go!
glad I could help thanks for commenting
I don't drink beer but I gave the thumbs up at this point in the video!
@@DIYJIM I drink root beer; but pretty sure I can get the job done! Great explanations!
Another great video. Thank you so much.
Thanks for watching!
Again! Thanj you so much! After changing the sand, i opened the pool this morning and i noticed sand coming into my pool... do you whats probably causing this?
Not sure maybe something is broke in your filter. If you figure it out let me know what happened.
Same filter. My guage snapped off leaving the threaded end inside the hole. Any suggestions on getting it out. When it snapped ,it snapped completely flush
maybe something like this would help. Not sure if this is small enough amzn.to/3QWWiaM
Thank you Jim for making this video , I’d rather do it myself .
No problem hope it helped
Older laterals unscrew rather than fold-up.
thanks for that tip
Excellent guide! We are doing this job in the spring. My Son and I will watch this before diving in.
Glad you liked it thanks for commenting
straight to the point……great job……im gonna go get the beer and knock it out …..thanks
Glad I could help thanks for watching
Thanks buddy , helpful vidro
Glad it helped
After you fill with sand do you need to fill with water of will the filter fill up when doing rinse????
When you open your valves back up it will fill up if you have a above ground pool. Hope this helps
And if I don't find sand in my filter what would this mean ??? And can i put any kind of sand ???
You need pool filter sand I bought my sand at Lowe’s hardware store. Or go to a pool store
Hi Jim. Did you put a specific type of filter in your vac? I tried a contraption similar to a dust collector to hook up between my shop vac and the sand, but I'm thinking that is going to take a long time. I have 300 lbs of sand to get out. I might just go straight shop vac like you, but I don't want to chance having sand going into the motor.
No just don’t vacuum to much at a time it’s heavy.
@@DIYJIMAbsolutely. I did find a filter sock to cover the shop vac filter. That should keep the filter and motor protected. Thanks again!
Liked ur vid.....I hope u were drinking good beer cause this job. Almost had me going to jack daniels!🤪
Sorry I have got better at this RUclips thing
Thanks so much. Subscribed. 😊
Awesome thanks for subscribing
You did good just by yourself! Also you keep all nice under your deck !😊
Thank you! 😁
Great video! This was super helpful, thank you!
Glad I could help thanks for watching
Could you do a video on hooking up a sand filter system
I could try to do that it might take a couple weeks.
Thank you. You made it very easy for a first timer.
Welcome thanks
And if I don't find sand in my filter what would this mean ???
Something is broke maybe your laterals
nice . thanks for this. you save me a fortune 😊.
No problem 👍
Thanks. for the great video
Welcome
Thank you Jim, that's very good food for though. I have been researching sand filters and I like the one you have. Seems like hard plumbing is the way to go. Lord Bless you and your family.
Thanks for watching and God bless you also have a great summer
Thank you for this video
Welcome
Are there really ANY one beer jobs anymore?
Good question, not sure how my work will turn out if I get into to many LOL
Our older Hayward filter does not have a clamp ring holding the valve to the filter. How is the valve secured to the filter and how can it be removed to replace the sand?
Sorry I’m not sure, hope you get it figured out.
Success! Being an old Hayward model 710 valve assembly, it unscrews CCW from the top of the Truflo sand filter. It took about eight turns to get it off.
This video is great.now I know how to change my sand
.tks so much
Love the beer tip. That helped too
Awesome thanks for watching
Thank you for the video
Welcome
Thank you for your help,!
You're welcome!
Great job! Thanks
Welcome
First comment besides you
Thanks bud
This was really helpful thanks.
Glad I could help
One beer job.
Great line sir.
Thanks for watching
One beer 😝 love it
Thanks for watching
Thank you very helpful
You're welcome! Glad to help
Good job. Thanks.
Thanks for warning
Great video
Thank you
Great job! Thanks
Welcome
@DIY JIM your filter was almost the same set up as mine. It took 300 pounds.
Great job Jim !
Thanks Chuck
Very helpful 👍
Thanks for watching
thank you
You're welcome
awesome video!
Thanks, glad I could help
You should use pressure fittings for pool Supply and returns not DWV
Thanks for the advice, what is the reason for pressure fittings?
I reused the old sand, I created a little sluice box with my wagon and filled it with water and all the contamination floated to the top, I just tipped it and drained it off, it took about 4 times and about 15 min. Then I scooped the sand back in. Works like a charm.
Thanks for the tip and thanks for watching