I have a case where z20NET ECU was physically destroyed by someone.. there is no possibility to download original bin that has immo code using can flashing method. I have VIN and photo of ECU sticker with serial number - Am I right assuming that if I fill those numbers in firmware informations in T8suite the software will calculate IMMO code needed by the car? Or do I need to somechow access CIM module, or retrieve it from keyfobb? Unfortunatelly AMD 29BL802C Flash is broken and one IC leg with trace is ripped off :/
We could try to recreate a bin together. Can you send an e-mail to kontakt@hirschmann-koxha.de with the VIN and serial please? I will speak with mackan too, he can probably shed some light into this :)
Hey man.. yesterday a tuner tried to map my 2011 Saab 93 2.0T 210HP but it went wrong, first the car couldn’t start and only clicked, he then proceeded to find a file from a 2005 which had the same files (not an expert in ecu) is there anyway I can find the same file that he read off my car so I can put I back into the ecu? Or can you possibly help me?
Write to kontakt@hirschmann-koxha.de and e-mail us the file the tuner flashed on the ECU. As long as he didn't overwrite VIN and immo the car can be saved.
I've been looking for this video for a long time to restore my block. but I can't replace the vin code and carpass. the video does not indicate where the carpass changes
Hey Al, can you send us your serial and VIN number to kontakt@hirschmann-koxha.de? We will create the file and enter the information for you. We actually mention that you have to double click on the blank space/text at the corresponding fields to make the changes.
I created the programming file I needed and wrote it to the ECU. What should I do with the immobilizer code in the (new) ECU what are the further programming instructions?
I have a case where z20NET ECU was physically destroyed by someone.. there is no possibility to download original bin that has immo code using can flashing method.
I have VIN and photo of ECU sticker with serial number - Am I right assuming that if I fill those numbers in firmware informations in T8suite the software will calculate IMMO code needed by the car? Or do I need to somechow access CIM module, or retrieve it from keyfobb?
Unfortunatelly AMD 29BL802C Flash is broken and one IC leg with trace is ripped off :/
We could try to recreate a bin together. Can you send an e-mail to kontakt@hirschmann-koxha.de with the VIN and serial please?
I will speak with mackan too, he can probably shed some light into this :)
Hey man.. yesterday a tuner tried to map my 2011 Saab 93 2.0T 210HP but it went wrong, first the car couldn’t start and only clicked, he then proceeded to find a file from a 2005 which had the same files (not an expert in ecu) is there anyway I can find the same file that he read off my car so I can put I back into the ecu? Or can you possibly help me?
Write to kontakt@hirschmann-koxha.de and e-mail us the file the tuner flashed on the ECU. As long as he didn't overwrite VIN and immo the car can be saved.
I've been looking for this video for a long time to restore my block. but I can't replace the vin code and carpass. the video does not indicate where the carpass changes
Hey Al, can you send us your serial and VIN number to kontakt@hirschmann-koxha.de? We will create the file and enter the information for you.
We actually mention that you have to double click on the blank space/text at the corresponding fields to make the changes.
@@hirschmannkoxha do you need a serial number from a native unit or from a donor?
@@al_bertusal_bertus7443 to "restore" the unit you are replacing we need the serial number which was in the car before!
How do you know your serial number or Chassis ID though? Where do you find this information on your vehicle?
As stated in the video - you will unfortunately need a picture of the sticker. So in case you ever decide to ship your ECU away - take a photo!
I created the programming file I needed and wrote it to the ECU. What should I do with the immobilizer code in the (new) ECU what are the further programming instructions?