A man is cheap there. Tools would cost money. In the old time coal mines in the UK a pit pony was looked after better than the miners, a pony would cost money to replace, a miner came with no cost.
When I saw that half round shield that covers top of hub so that dirt doesn't get in the bearings I thought " they are gonna put that U shaped bracket wrong way around so it collects dirt instead if shielding from it". Sure enough. 2:38 shield on top. 17:05 shield on bottom
The round patch is of thinner and probably weaker material than the base plate. And the rough center cut is likely not going to provide any support. This thing is likely to be back rather sooner than expected.
i love watching all these Pakistani mechanical operations but have questions. 1) why do these folks not use air tools, cordless impacts etc? it seems everyone has lathes, drill presses, welders etc. so why not tools that would make most these jobs go much faster. i would like to see some of the more "tedious" stuff edited out. i dont need see all 15-20 bolts reinstalled on every big job. 2) why are there "Sooo" many pcs of heavy equipment around? i never see any major construction projects going on. other than that, i give these folks 2 "thumbs up" for their ingenuity, "can do" spirit and a "never say never" approach to any job. what ive seen done with just basic hand tools still amazes me.
@@truperda_staraja the people in other part of the world can't afford safety measures they are trying hard to make the ends meet , but I am disappointed to see the comment section filled with all sorts of negative comments Bro, if these workers had enough money they would first buy food for their family seconds comes the good education for their children , then they would buy toys for their kids , after all those expenses there is nothing left for themselves ... But west is so jealous of hard working people from east they just bombard the comment section with negativity ....
I could not be a mechanic in this country after working in the USA. Main reason I am spoilt as I have always had a compressor, air tools, and impact sockets. I would never consider taking the time to remove all those rusty bolts with nothing more than a crescent and box end wrench. The hourly rate must be very cheap in this country.,
لا حول ولا قوة الا بالله العلي العظيم عدد ما ذكره الذاكرون وغفل عن ذكره الغافلون 🌹🌹لا حول ولا قوة الا بالله العلي العظيم عدد اوراق الشجر وعدد حبات المطر وعدد انفاس البشر 🌸🌸لا حول ولا قوة الا بالله العلي العظيم عدد ما كان وعدد ما يكون وعدد الحركات والسكون 💥لا لاحول ولا قوة الا بالله العلي العظيم 🍀🍀🍀الله صل وسلم وزد وبارك على الحبيب المصطفى سيدنا محمد وعلى آله وصحبه أجمعين يارب العالمين 🌺🌺🌺
When that bloke beat that bolt out with a heavy club hammer I stopped watching, So primitive in their methods And not to mention dangerous work environment.
WTF,THEY ARE USING SNIPES AND SOCKETS AND BUDDY IS USING AN IMPACT IN THE BACK GROUND.DO THEY NOT KNOW ABOUT SHARING,I WONDER WHAT HAYNES WOULD ALLOW FOR TIME ON THIS REPAIR. PRECISION REPAIR LTD.😂HOW IS THE WELDING FLASH😭
На три вещи не устаешь смотреть, как течёт река, как горит огонь и когда кто то работает
dont let the matel roller chase you. good work
и как обычно трое работает. и ещё 10 сидят рядом.
они получатели зарплаты... работают подмастерья, а мастера им пенделя раздают...
пакистанское разделение труда
они являются резервной заменой на случай, если одному из трех рабочих сломают руки или отрубят ногу.
I’d like to request to these guys disassemble/rebuild an MRI machine please
잘 보고 갑니다...^^
Техника безопасности на ВЫСОТЕно все получается,
ustad imran great man
إِذَا زُلْزِلَتِ الأرْضُ زِلْزَالَهَا (1) وَأَخْرَجَتِ الأرْضُ أَثْقَالَهَا (2) وَقَالَ الإنْسَانُ مَا لَهَا (3) يَوْمَئِذٍ تُحَدِّثُ أَخْبَارَهَا(4) بِأَنَّ رَبَّكَ أَوْحَى لَهَا (5) يَوْمَئِذٍ يَصْدُرُ النَّاسُ أَشْتَاتًا لِيُرَوْا أَعْمَالَهُمْ (6) فَمَنْ يَعْمَلْ مِثْقَالَ ذَرَّةٍ خَيْرًا يَرَهُ (7) وَمَنْ يَعْمَلْ مِثْقَالَ ذَرَّةٍ شَرًّا يَرَهُ 8
all used man power.... very hardworing👍👍👍
OMG. WD-40. Pure luxury.
A man is cheap there. Tools would cost money. In the old time coal mines in the UK a pit pony was looked after better than the miners, a pony would cost money to replace, a miner came with no cost.
Слава богу хоть никому руки ноги не оторвало и то хорошо....ну или вырезали эти моменты при монтаже видео...
The team work is incredible.
When I saw that half round shield that covers top of hub so that dirt doesn't get in the bearings I thought " they are gonna put that U shaped bracket wrong way around so it collects dirt instead if shielding from it". Sure enough. 2:38 shield on top. 17:05 shield on bottom
Lmao !!! :))
I was thing the same thing
The round patch is of thinner and probably weaker material than the base plate. And the rough center cut is likely not going to provide any support. This thing is likely to be back rather sooner than expected.
Mengerikan, sungguh pekerjaan yang berbahaya, kurang aman
i love watching all these Pakistani mechanical operations but have questions.
1) why do these folks not use air tools, cordless impacts etc? it seems everyone has lathes, drill presses, welders etc. so why not tools that would make most these jobs go much faster. i would like to see some of the more "tedious" stuff edited out. i dont need see all 15-20 bolts reinstalled on every big job.
2) why are there "Sooo" many pcs of heavy equipment around? i never see any major construction projects going on.
other than that, i give these folks 2 "thumbs up" for their ingenuity, "can do" spirit and a "never say never" approach to any job. what ive seen done with just basic hand tools still amazes me.
I enjoy them working with just the basic tools
The main reason is the are without power more often than not and only a few place have any electric. These videos are from the poorist of cities.
You can hear neighbour guys use air tools. But that group of workers have no such tools yet.
هزه ارضيه قويه منذقليل. شعر بها اغلب مناطق سوريا الساعه 4،19
اللهم انك انت الله الاانت الغني ونحن الفقراء نحن عبيدك بنو عبيدك نواصينا بيدك ماض فينا حكمك عدل فينا قضاؤك لاملجاأ ولامنجا منك الا إليك اللهم ادفع عنا البلاء والبراكين والزلزال والمحن وجميع الفتن وماضهر منا وبطن
безопасность и охрана труда на высшем уровне....
And so is the jealousy
@@yashchourasia it's not entirely clear what jealousy has to do with it )))...
@@truperda_staraja the people in other part of the world can't afford safety measures they are trying hard to make the ends meet , but I am disappointed to see the comment section filled with all sorts of negative comments
Bro, if these workers had enough money they would first buy food for their family seconds comes the good education for their children , then they would buy toys for their kids , after all those expenses there is nothing left for themselves ...
But west is so jealous of hard working people from east they just bombard the comment section with negativity ....
👏👏👍
CHIP & DALE is talking at background 🤓🤓🤓
Everytime i watch one of these show i end up buying a new cordless power tool
Lots of love for hard working Pakistani brothers
13:12
Wranglerstar approved 👍
Молодцы😁👍
Он когда варил забыл электрод согнуть
Nothing is perfect. I like the machine shop segments in between the mechanic work.
I could not be a mechanic in this country after working in the USA. Main reason I am spoilt as I have always had a compressor, air tools, and impact sockets. I would never consider taking the time to remove all those rusty bolts with nothing more than a crescent and box end wrench. The hourly rate must be very cheap in this country.,
이들은 얼마나 힘들고 육체적인 노동을 하는지 세삼 느낀다 .
А если им дать норм инструмент, что будет?
! ratchet was found---Yea!!!!!!!!!!!
Dungu
They have upgraded from "safety flip flops" to "safety sneakers", OSHA can be proud 😉😉😁😁
Osha, emsha, epa, is what's f***ked the great USA..
Osha, emsha, epa, is what's f***ked the great USA..
لا حول ولا قوة الا بالله العلي العظيم عدد ما ذكره الذاكرون وغفل عن ذكره الغافلون 🌹🌹لا حول ولا قوة الا بالله العلي العظيم عدد اوراق الشجر وعدد حبات المطر وعدد انفاس البشر 🌸🌸لا حول ولا قوة الا بالله العلي العظيم عدد ما كان وعدد ما يكون وعدد الحركات والسكون 💥لا لاحول ولا قوة الا بالله العلي العظيم 🍀🍀🍀الله صل وسلم وزد وبارك على الحبيب المصطفى سيدنا محمد وعلى آله وصحبه أجمعين يارب العالمين 🌺🌺🌺
that wont ever brake now good repair
😃😃😃👍👍👍👍🤝
Nice
👍👍👍👍👍👍👍
Пневмопистолет бы облегчил работу намного
Наконец у них есть трещотка и гайковерт
Ну хоть кто-то на этих видео резьбу маслом смазал.
А не локтайт?
Two are working, the rest are watching))
How did they know the mount was cracked?
No era mejor elaborar la lamina calada de nuevo completa.
These guys don't know about lubrication fluids
could probably go help put the Russian tanks back together pmsl
I’ve done some work on these machines before and it was painful.
When that bloke beat that bolt out with a heavy club hammer I stopped watching, So primitive in their methods And not to mention dangerous work environment.
😂
guess why it's so / primitive / work and life in general ??
Primitive maybe, they get the job done, just like the old days wherever you come from and indeed they have the skill.
For sale. Hand built.
WTF,THEY ARE USING SNIPES AND SOCKETS AND BUDDY IS USING AN IMPACT IN THE BACK GROUND.DO THEY NOT KNOW ABOUT SHARING,I WONDER WHAT HAYNES WOULD ALLOW FOR TIME ON THIS REPAIR.
PRECISION REPAIR LTD.😂HOW IS THE WELDING FLASH😭
0