FIXED: Honda EU 3000is only runs on CHOKES - Here's How to Fix It

Note this might not work for you but I 90% sure if you have a Honda Eu3000is or any Honda inverter generator not running right it is going to be in the Carburetor. check the gaskets check the piolet jet check the whole carb. I hope this video helps you get your Honda running again.
Join this channel to get access to perks:
/ @repairgang
Don't forget to follow me on all the socials.
link tree linktr.ee/SimplyAndrew
Twitter / repairgang
Tik Tok / repairgang
Instagram / repairgang
Business email: [e-mail]
Disclaimer:
Some links you may click on can be affiliate links witch means if you buy something I will get a small commission at no extra charge to you. just helps the channel out thank you guys so much have a great day.

[@pedrotamez1422]

Thanks to you I fix my generator!!

[@rickbroerman9267]

You make the disassembly and assembly so easy. Thanks for the video 📹 Andrew!!!!

[@RepairGang]

Yeah it comes with time but Honda makes it pretty easy to work on stuff

[@ProTurbo1988]

did that 3 times and still have to put the choke on. Nice video man

[@peter455sd]

The mixture is off

[@ProTurbo1988]

@@peter455sd I had to buy new carb. And problem solved.

[@philipholloway1384]

You never cleaned anything. Your phone rang and then you said you were done 🤷

[@user-eg9om8pc8p]

Good job man) Hi from Vladivostok city, Russia)

[@RepairGang]

Hope you doing ok down there be safe

[@user-eg9om8pc8p]

@@RepairGang thank you sir

[@towuma]

Actually the engine is not getting too much air when it is not running off choke, it is not getting enough fuel. The choke creates a small vacuum behind and allows the engine to suck more fuel out of the jet. Usually if your engine does not run off choke the jet is partially clogged.

[@wallgamble5656]

Good job man. Thanks

[@wildbillslawncare5901]

That is pretty quiet. That would be a easy fix if it was only that 11mm bolt. Man you always get them carburetors out fast. I have the same problem always have phillips screwdrivers and can never find a flathead. That was weird when it did it again then it was fine. Nice job Andrew.

[@RepairGang]

I learned over time for those carburetor

[@wildbillslawncare5901]

@@RepairGang Oh I know you have been doing this for a long time so I know you know what your doing 👍

[@rickcbr900rr]

Thanks man, I have A 2000UI and it is doing something like this !

[@RepairGang]

Then cleaning out the carburetor and the pilot jet should help that problem

[@AMadrigal72]

Same here. I would clean the carb and it would last a couple of months. Ended up buying a whole new carb.

[@lancerains4185]

Should have pulled the arrester cage out of the exhaust I bet it's filthy and nearly clogged..

[@bing12345678901]

Didn't need to do all that. Just start with cleaning the pilot (no disassembly) and then dig deeper if needed.
You can check the needle valve by draining bowl.

[@RepairGang]

Yep

[@CactusClan]

It’s a nut, not a bolt

[@RepairGang]

Yeah I mix those up a lot when I say them

[@gabrielfuete4591]

Thank 👍🏾

[@RepairGang]

You’re welcome 😊

[@mr1pearl]

I expect nothing less from a Honda ! Nice and quick they way it should be !!!

[@RepairGang]

Honda is king

[@lancerains4185]

Clogged jets

[@patcompton6065]

How do you remove the gas tank on that same generator? Thanks

[@RepairGang]

It's a pain in the ass

[@ckuiper7332]

Flush the peepee out of it. I also saw there is a small filter in the bottom of the tank.. haven't gotten that far yet.. You can use the same gallon or so of new fuel, shake rattle n roll!. in between flushes, perhaps some carburetor cleaner or other solvent into yet another container,.. just don't re-use that fuel in that or other small engine tank again.. that should teach us to fire it every month under a load and remain on schedule with the maintenance!

[@patrickdowning1328]

Bolts? They looked like nuts to me

[@RepairGang]

I mix the wording up all the time when talking out loud 😂😂

[@tedkucin2428]

That's how my 3000 run, choke half out only or stall out. Brand new unit. Carb shouldn't be dirty. Your expertise getting carb off beyond my skill level. Take it to the shop I guess. You did confirm it's an air mixture problem. Thanks

[@RepairGang]

I'm glad it helps. Sorry you have to take it to a shop . Inverter suck work on

[@grzlbr]

"You did confirm it's an air mixture problem."
I think he confirmed that paint chips might fix your generator, that's about it.

[@josp3160]

actual problem is, it’s not getting enough gas. Because the main jets probably clogged.

[@rashidsam7955]

love from pakistan