Ford Transit Custom 2.2 Repeated DPF & MAF Fault After Replacing Various Parts
HTML-код
- Опубликовано: 8 сен 2024
- various parts replaced on this van without finding a solution.
Blocked vaporiser replaced & DPF cleaning done. found damage on air flow sensor harness.
fault codes:
P246C:00-AF Particulate Filter Restriction Forced Power Limit
P2463:00-AF Particulate Filter Soot Accumulation
P24A4:00-AF Particulate Filter Restriction Soot Level Too High
P0104:00-24 Mass Or Volume Air Flow Sensor Circuit Intermittent
It really helps to have the experience it just makes the job that much quicker to diagonise
Thank you
Good lad jimmy. Another one put right. See you on the next one.
My dieesel doesnt have a dpf and i dont intend to get a car with one yet here i am binging on dpf vids.good stuff from O'Riley's.
Great work there lad, not to many would think of checking the pins on the plugs, thats why so many vans can be picked up for ready money , and its always some thing simple, if you know....😀
Really good thorough video. Thanks
Thanks
Good video again Jimmy, I bet you can diagnose these in your sleep by now..
I sleep talk about vaporizers 😂
Great job again Jimmy 👍
Thanks
Hi jimmy the video was a little bit blurred I just found it a bit hard to see your live data I think you could clean the camera lens thanks great video
Can you comment on how many KLM the vehicles have done before it gets to this stage and till it needs to be done again
Good job Jimmy
Thanks
What about the new transit custom without the vaporiser
love the content mate
Cheers 🍻
Ive had that a few times over the years jimmy with the thermal cut out kicking in and obviously discinnecting the battery sometimes does and does not work but reseting the egt value does usually work on the 2.2. Whats your opinion on the thermal cut out ? Is it an indication of an already damaged dpf or damaged sensor?
Regards mate.
Great videos. Very helpful. Thanks. Have you had an issue with intercooler air temperature sensor on these vans? I have had a engine service light after driving for a hour or so, with no loss of power and doesn't go in to limp mode, which disappears when the ignition is turned off and no error codes. Took out the sensor to test it, got about 10 Omhs. Apparently a new sensor reads about 18 Ohms. But noticed the sensor was cover in oil.
Another successful dpf filter job if it ever happens to my mercedes e280 cdi i will be bringing it to you from Ipswich what kinda price do you charge for this service cheers Brian.
👍🏻
👍🏻
Jimmy, if your car is running with a partially blocked DPF (But no check engine light), will it effect the fuel economy/efficiency of the Engine
Maybe slightly less mpg buy shouldn't be more than 1-2mpg
Nice fix Jimmy , how much is the ismart scanner ? Cheers
£1850 from Launch UK... not in website you have to call
Hi mate been looking at these 2.2 vans on a 16 plate but was told by a mechanic to stay away due to issues? Can you offer any advise on which is more reliable the 2.2 or the 2.0 version of the Custom?
I have a 2.2 with 320,000 great vans
Avoid the 2.0.
Thank you 👍🏻
Do you ever get this problem on the ecoblues? Without vaporizer.
Yes
@O'Rileys Autos did one last week no code other than soot accumulation . Uses normfest cleaner but I reckon the launch stuff is better got the pressure down to around 2kpa
How do you rate these vans and engines jimmy ?
Best van of this size on the market in my opinion. All vans have problems but you have to find what has less problems.
These 2.2 are good but the newer 2.0 eco blue not as good
Hi Jimmy
Do you get near Merseyside ever for work?
Only Bedfordshire
@@ORileysAutos ok no problem. Good luck.
Did you check the mass airflow pins wasn’t bent?
Yes
Jimmy, would you say that its worth doing a DPF clean like how you do them as part of a yearly maintenance along with the yearly service?
If it ain't broke don't fix it
@@ORileysAutos understood 👍. Thank you for the reply.
Were are you based buddy ??
Bedfordshire
Just gut it, the DPF just isn't fit for purpose
The abs light tho
🤫
Save your money just get dpf & egr delete and ecu remap