I just have to say, I love these videos! I don't own a diesel or work on engines (except for my old Allis Chalmers WD) but I find it very interesting. Been following you for a while. Thank you!
Hey man awesome video it really helped me with my truck I hade the same thing happen. I replaced the turbo actuator and the vain arm moved freely but after the new actuator install I’m still get the codes after I get up to operating temp with exhaust brake on and I lose it when the light pops back up. Seeing if I could pick your me brain I know it’s happened to a bunch of people. Thanks in advanced!!
Section 9 is in the Ram service manual at the dealership. Autel, Bosch, snap-on have just duplicated the screens and procedures from the ram service tool.
You should look for a older Thinkpad T430 laptop and swap a Solide State Drive into it. Those old thinkpads with the Intel Core i5/i7's still work great with 8GB of ram and there is a lot of aftermarket battery support and they are build to last. You could try one, they are 150 dollars max second hand
One of your subs that lives closer and is in IT ought to be able to hook you up with an ssd on your current laptop. Yod be amazed what an ssd and a reformat will do for an older laptop. Id offer to have you mail it to me but im guessing you wouldnt be able to be without it that long.
Great work and nice to get to know Daisy a bit more...she's a sweet heart. What does that truck owner do for a living...truck is dirty, the way trucks should be! cheers
hahaha Warren I did have a laugh, you mentioned the typos in the diagnostic tool help and yet in the comments here you have a typo.....".. bolts witch...??" really is it good at magic?? I think you meant which.... I know I know am just teasing you but I thought was funny. Thank you though for all your vids and like others have said I love your honesty about what you like and do not like about various bits of equipment.
hahaha yay all correct now :). But was funny. I hope you and family are all safe and well?. Thank you for all your efforts. You deserve to have 20 times the amount of subscribers than you have now.... just hope when you hit 1 million subs you do not forget all us little small fry :). Thank you for everything you do. This person at least appreciates it.
after performing the alignment procedure with the scan tool , does it matter which position the lever is in when installing the actuator. the glare is hard to see, but does it go towards the exhaust on all the cummins??? have a 2010 6.7
Really like to hear how many hours/ miles stuff has on it when you're working on it. And it's always good to hear your opinion about who makes the best this or that. Tools, tractors, trucks or whatever. And that transmission plug you robbed off That 6.0 Ford transmission on the truck you were working on for yourself. Did those people ever come back and make that right with you?
Hey warren I was thinking about your new service truck......I have a very good ten speed that I removed from my freightliner FL112...it’s a meritor and has only 249,999 on it when I swapped out the c10. For a c12 with overdrive fuller I’m installing a 5.9 into Chevy service truck and have a NV five speed...I think if the seven speed you have might be better
on freightliners i have replaced a lot of these. like to the point where i think they should have been recalled. EGR coolers too, for the life of them cummins cannot make a good egr cooler. even brand new 2019's are coming in with leaking coolers
Great video , well I just replaced mine BUT the plug for actuator is different than the old one , is there an adapter or can I just switch the plug from actuator, thanks in advance
Hey got a question maybe you can help me out. Have a 14 Ram Cummins with 183k on it, just threw a. Heck engine light U01010C I believe, well code is turbo actuator lost communication. So my question is, is my turbo about to take a dump or is it possible injustice have to replace actuator? Haven't run diagnostic yet bit trying to get some insight on this. I've called some shops and they tell me to replace turbo etc. I dont want to get taken for a ride especially if it's just the actuator. Anything I should look for in regard to the turbo going? Any help on this I would appreciate
How and where did you drain the coolant from before you recalibrated the turbo actuator? I have a 2014 Ram 2500 and trying to find the easiest way. Thanks.
My dad’s 2008 dodge exhaust brake quit working the other day and then it threw a p2262 code. Any ideas? It was deleted about a week earlier. Worked good for a week then we noticed it quit.
I love this channel. Learn more here than anywhere else. I'll be grateful to have half the knowledge you got one day.
I just have to say, I love these videos! I don't own a diesel or work on engines (except for my old Allis Chalmers WD) but I find it very interesting. Been following you for a while. Thank you!
Can't wait till you get the service Truck up and running, All the more room you' and doggies Wil have !
Hey man awesome video it really helped me with my truck I hade the same thing happen. I replaced the turbo actuator and the vain arm moved freely but after the new actuator install I’m still get the codes after I get up to operating temp with exhaust brake on and I lose it when the light pops back up. Seeing if I could pick your me brain I know it’s happened to a bunch of people. Thanks in advanced!!
Great work Warren 👍👍
Another job well done.
Section 9 is in the Ram service manual at the dealership. Autel, Bosch, snap-on have just duplicated the screens and procedures from the ram service tool.
Very informative, just try to use a different light next time. Super bright in the camera.
Oh Ive had an ISX vgt close completely no start situation and no code thrown that was fun to figure out
You should look for a older Thinkpad T430 laptop and swap a Solide State Drive into it. Those old thinkpads with the Intel Core i5/i7's still work great with 8GB of ram and there is a lot of aftermarket battery support and they are build to last. You could try one, they are 150 dollars max second hand
Hi warran a another great job buddy
Just bought the Autell 808. Love it.
Alex Mckie using it on a dodge 6.7l?
Just got a new hp 360 for my business. Ssd it's awesome plus its touch screen
One of your subs that lives closer and is in IT ought to be able to hook you up with an ssd on your current laptop. Yod be amazed what an ssd and a reformat will do for an older laptop. Id offer to have you mail it to me but im guessing you wouldnt be able to be without it that long.
Like when you do the pick up truck videos too. Especially the Ford ones. :)
Try to get some variety in there. Thanks man.
Where you located at
Great work and nice to get to know Daisy a bit more...she's a sweet heart. What does that truck owner do for a living...truck is dirty, the way trucks should be! cheers
hahaha Warren I did have a laugh, you mentioned the typos in the diagnostic tool help and yet in the comments here you have a typo.....".. bolts witch...??" really is it good at magic?? I think you meant which.... I know I know am just teasing you but I thought was funny. Thank you though for all your vids and like others have said I love your honesty about what you like and do not like about various bits of equipment.
There , I fixed my screw up. Lol
ummm errr nope still wrong whitch?? is that even a word ?? hahahahahaha
I'm confusing bitch with which haha.
hahaha yay all correct now :). But was funny. I hope you and family are all safe and well?. Thank you for all your efforts. You deserve to have 20 times the amount of subscribers than you have now.... just hope when you hit 1 million subs you do not forget all us little small fry :). Thank you for everything you do. This person at least appreciates it.
after performing the alignment procedure with the scan tool , does it matter which position the lever is in when installing the actuator. the glare is hard to see, but does it go towards the exhaust on all the cummins??? have a 2010 6.7
Do you have to drain the coolant to do this
Really like to hear how many hours/ miles stuff has on it when you're working on it. And it's always good to hear your opinion about who makes the best this or that. Tools, tractors, trucks or whatever. And that transmission plug you robbed off That 6.0 Ford transmission on the truck you were working on for yourself. Did those people ever come back and make that right with you?
No , never got paid for that one .
If I remember right that was a company and not an individual. Seems like you would have a way to go after a business that refused payment...
Oh , they'll need something again someday , trust me they will wind up paying in the end.
Hey warren I was thinking about your new service truck......I have a very good ten speed that I removed from my freightliner FL112...it’s a meritor and has only 249,999 on it when I swapped out the c10. For a c12 with overdrive fuller
I’m installing a 5.9 into Chevy service truck and have a NV five speed...I think if the seven speed you have might be better
on freightliners i have replaced a lot of these. like to the point where i think they should have been recalled. EGR coolers too, for the life of them cummins cannot make a good egr cooler. even brand new 2019's are coming in with leaking coolers
Great video , well I just replaced mine BUT the plug for actuator is different than the old one , is there an adapter or can I just switch the plug from actuator, thanks in advance
Love your videos warren you have thought me a ton! What grease is it that you are supposed to use
What tool are you using
Thanks for this video. Does all the coolant need drain when doing this or will some just leak out and need topped off?
Awesome video tho got to say I'd rather do an ISX than a pick up but money is money
What kind of gasket did you use in between the actuator and the Turbo?
Hey got a question maybe you can help me out. Have a 14 Ram Cummins with 183k on it, just threw a. Heck engine light U01010C I believe, well code is turbo actuator lost communication. So my question is, is my turbo about to take a dump or is it possible injustice have to replace actuator? Haven't run diagnostic yet bit trying to get some insight on this. I've called some shops and they tell me to replace turbo etc. I dont want to get taken for a ride especially if it's just the actuator.
Anything I should look for in regard to the turbo going?
Any help on this I would appreciate
Also note the check engine light comes and goes doesn't stay on constant
You ever get a fix for this? I have same issue now
Does the ms 906 come with the program to program the turbo actuator on the 6.7 Cummins
Turn your volume up warren, can't hear you.
How and where did you drain the coolant from before you recalibrated the turbo actuator? I have a 2014 Ram 2500 and trying to find the easiest way. Thanks.
Did u get it fix i have a 2014 too
Long live the 7.3 powerstroke!!
What scan tool is this?
Just like the ISX like you said haha
How did you drain coolant before taking off actuator?
Carefully crack the bottom radiator hose from the neck of the radiator.
So just crack it not fully take it apart?
What coolant would you recommend to refill the system besides the Mopar brand?
What symptoms would truck have with a bad actuator?
JWGhost6.7 truck feels bogged down and and exhaust note sounds deep and it feels like its lost power
If there is a vgt delete in a Cummins that is in a pickup truck can you lose your exhaust break like you were describing for an isx?
Yes
western truck and tractor repair awesome thank you for the info.
How do I get ahold of you to do the same job on my 16 dodge I am in klamath falls
wlrfixinit@gmail.com
Did u get a hold of him to do the job?
put a solid state drive in that laptop.. instead of buying another laptop.. mount the old harddrive in an external case so you have it for backup..
Is there way you can tell the actuator is bad
It'll throw a actuator code , or it'll sound like your exhaust brake is always on.
I have a p003a code I still get boost and I think my exhaust brake works could it be soot up for the EGR I just deleted my truck
My dad’s 2008 dodge exhaust brake quit working the other day and then it threw a p2262 code. Any ideas? It was deleted about a week earlier. Worked good for a week then we noticed it quit.
all my computer ruunning an ssd drive and my computer run fast and it easy replace a laptop hard drive with an ssd drive these day
you don't need to make videos' nuthn is clearly spoken through and shown.
Coming from a guy with no subscribers or no content.
Good Tech INFO Thank You !
Thank you sir !