bought a truck, looks like they put a new actuator on the turbo, the exhaust brake barely works or comes on when in full exhaust mode, I have no codes on the truck. idk whats going on with it
Why would I be getting some oil seepage on the boost side? 2018 Fleetwood Discovery RV 42,000 miles, with new air filter, I dont idle for long periods. ISB17
New turbo it makes boost when I add throttle but if I have engine brake set in stage 3 or high my vgt doesn't slow my engine down take 10-15 seconds for boost Guage just to get to 20 psi sometimes it goes to 30psi. It use to slow the engine down fast now it's no different then just using engine Jake's. Actuator was calibrated so I could be put on engine and total turbo rebuilt. I have no codes. Where do I look. The turbo failed to slow truck down. Replace both solenoids and had engine brand rebuilt kit done and a new cylinder head. When my turbo started doing this I still had good boost just nothing to notice for slowing truck down. Seems like I on the brakes all the time now. Also replace injection harness, exhaust back pressure sensor and the little steel line and air intake sensor. Truck is deleted and has been flawless 3+yrs till this happened. HELP what's wrong where do I look it only fails on engine braking side.
Very Informative 👍 My Question is there supposed to be a Gasket in between the exhaust port of turbocharger and the BPV? When I popped mine off, all I saw was rust and tiny fragments of what looked to be red silicone, but I didn't see no actual Gasket?!? 🤔
what is the cost of a new turbo and actuator from you canadian i know if I buy one from kenworth for a kenworth t800 its over $14000 for a 2015 kenworth
The actuator will have to be mounted on the turbo to be calibrated by someone with Holset E-tool. Most shops use Cummins Insite, which would also require the turbo to be installed on the engine to calibrate.
bought a truck, looks like they put a new actuator on the turbo, the exhaust brake barely works or comes on when in full exhaust mode, I have no codes on the truck. idk whats going on with it
Why would I be getting some oil seepage on the boost side? 2018 Fleetwood Discovery RV 42,000 miles, with new air filter, I dont idle for long periods. ISB17
If you take the actuator off do you have to calibrate it again if it was already calibrated
Good question. I wouldn't think so as long as you get it in the right place putting it back on. But, did you ever find out?
Very helpful $ detail video
Very good video!! Quick, straightforward, pretty darn detailed and no stupid annoying background music. Actually learned something from this one.
New turbo it makes boost when I add throttle but if I have engine brake set in stage 3 or high my vgt doesn't slow my engine down take 10-15 seconds for boost Guage just to get to 20 psi sometimes it goes to 30psi. It use to slow the engine down fast now it's no different then just using engine Jake's. Actuator was calibrated so I could be put on engine and total turbo rebuilt. I have no codes. Where do I look. The turbo failed to slow truck down. Replace both solenoids and had engine brand rebuilt kit done and a new cylinder head. When my turbo started doing this I still had good boost just nothing to notice for slowing truck down. Seems like I on the brakes all the time now. Also replace injection harness, exhaust back pressure sensor and the little steel line and air intake sensor. Truck is deleted and has been flawless 3+yrs till this happened. HELP what's wrong where do I look it only fails on engine braking side.
Can I check the actuator without draining the coolant?
Very Informative 👍 My Question is there supposed to be a Gasket in between the exhaust port of turbocharger and the BPV? When I popped mine off, all I saw was rust and tiny fragments of what looked to be red silicone, but I didn't see no actual Gasket?!? 🤔
Are vgt the same from 2010 to 2022 6.7 cummins or is there a difference between them.
Thank you, helpful
Anyway to install a vgt turbo on a 99 isx ? "Piggy back controller" The Jake on my 2011 isx is stronger than the 99. Thanks great advice!
Can I install it on a bmw E36 325i engine
Why is my boost Air so hot?
What is a good cummins isx 15 vgt turbo
Should I calibrate the actuator before installing or after? Thank you
Go through the install process in insite before putting it on the turbo. After installing then you run the calibration.
What kind the oil i can put in there
what is the cost of a new turbo and actuator from you canadian i know if I buy one from kenworth for a kenworth t800 its over $14000 for a 2015 kenworth
Assuming that 2015 Kenworth has the ISX engine - a new turbo and actuator would be less then $5k CAD at the moment
@@momentumworx yes its a cummins isx engine
Can you take it to get calibrated when it's not mounted to the truck?
The actuator will have to be mounted on the turbo to be calibrated by someone with Holset E-tool. Most shops use Cummins Insite, which would also require the turbo to be installed on the engine to calibrate.
👍