Clutch Maintenance
HTML-код
- Опубликовано: 2 окт 2024
- A step by step guide to replacing the clutch plates in a 2017 and newer GSXR 1000 equipped with an backdated OEM basket.
Tools Used:
3/8 Ratchet and extension
12mm and 10mm Wrench
10mm, 8mm and 1/4 socket
Hex head size 5
Magnet
Phillips head screwdriver
Impact Driver/ Drill
Micrometer
Hi man, where you boy there clutch basket with 6 springs? I have the same motorcycle but I have a clutch basket with three springs.
I grabbed it off of eBay a while back. It’s a 2009-2016 GSXR 1000 clutch basket
Great Job 👍🏼
No easier way to do a manually adjusted clutch.
Thanks!
Schönes Video mein Freund.
Thanks!!
Had our eyes on ya for some time. U movin. 👊
Going with Brock or softer springs?
Think rockin' 10w30 @ a daily basis would be ok? (-20C/68F to +35C/95F @ summer)
My bike seein 10k miles / season, mostly highway/pulls and the occasionally drag/dig treatment at the few events we get going @ here. We don't have the low grade stuff/Alisyn stuff and aditives or the Rotella either. Knew the T6 is the way to go... Been using the BelRay 10w40 EXS (we sell it) and the ECSTAR (Shell) T9000 10w40 that i get from time to time at the dealership, can't say i've had/heard of any bad experiences with them.
🤘
I prefer the Brocks HD springs! Haven’t had any issues with the oil, but my bike isn’t rode a lot anymore. Probably better to run a thicker oil in the heat for that purpose. I’ve ran Amsoil with good success also
The way you smack that green finger bro is hilarious for some reason 😂
😂😂😂 if you ever need a extra hand let me know and I’ll send it over
@@RedGSXR 😂😂😂😂 will do
Rotella 15/40 semi 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾
Yessir!!!! Works great and the price is right
Think this is a military training class shaking my head
And you bet not be late troop 😂
💪🏾
What do you mean by backdated clutch? Just the older style clutch packs? Thanks
Thanks for asking! I’m using a backdated setup from the 2009-2016 model gsxr 1000. The original 2017+ setup uses a “ramp” style that doesn’t give a lot of clutch control to the rider and only has 3 clutch springs. The backdated setup is more traditional and has 6 clutch springs so it’s a lot better for launching a shorter bike.
@@RedGSXR my man thanks for the free game. Always appreciate when someone goes out of their way to teach and give information. Getting a new gen like yours soon and I wanna go fast like you 👍🏽
@@JW-ot5zq welcome! Go ahead and get it, you won’t be disappointed!
Great video thank you
Welcome and thanks! Glad it helped!
💪🏾
Purring on tht start up 👌🏾
Yessir! 👌🏾👌🏾
How long do the clutches usually last? @red_gsxr
Really depends on maintenance. I’ve had a set in for almost 2 years with a stretched bike. On a swb setup they lasted about a month or so with hard use
Love the videos bro!!!
Thanks for tuning in!!