B20VTEC Intake Manifold Dyno Comparison
HTML-код
- Опубликовано: 18 окт 2024
- We put Bolo's B20V on the dyno with a Type R intake to compare against the Edelbrock Victor X Intake. After only an intake change, we net some pretty significant power gains.
CAMS: shop.humbleper...
CAM GEARS USED: shop.humbleper...
CLUTCH USED: shop.humbleper...
BUY HONDATA PRODUCTS HERE ► shop.humbleperf...
Support Us / Buy Parts ► shop.humbleperf...
Merch ► shop.humbleperf....
Facebook ► / humbleperformance
Alex Instagram ► / humbleperformance
Kenny Instagram ► / awdk20kenny
Falo Instagram ► / falotech
Manuel Instgram ► / manuelfabrications
Bolo Instagram ► / jonny2trill 
Авто/Мото
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
The end is a bit of a ramble, but it's jam packed of information for those who want to learn.
Humble Performance what cam is on that black EK?
Alex thanks for all the knowledge you share. You will be blessed for you heart for people. I am looking forward to having you guys work on my car in the future.
Humble Performance what’s the set up on the motor
you guys killing it with these informative videos
Would the elderbrock manifold gain more if turbo??
If the rest of the world was like Humble Performance it would be a better world
I'm an older guy, but I changed jobs and recently bought an 1994 Accord, and I got "hooked" I am learning from the ground up on these cars, and recently found your channel, and then I ran into this video of how you are helping people, that is AWESOME, God bless you guys man. I will be supporting this channel for SURE!
Man 94 accord! F series? I'm a f h series guy and there isn't much of us ha. Are you boosting or what
Great stuff guys.. I've done a similar test on my 1.8L LSvtec with 3 intake manifolds at EBTEC with my bro/tuner James.. Setup mad 218whp and 138tq with the Edelbrock Victor X but felt sluggish in the low-end range.. Then I installed a Blox IM and lost 10whp and 5tq up top but yielded about 5whp and tq in the low-mid range. Needless to say I switched back to the Edelbrock VictorX.. I then switched to the Skunk2 Ultra Street IM which yelided me the best results.. Made 220whp and 148tq with 10-17whp & tq gains throughout the majority of the power band over the VictorX.. Car feels like a whole different animal now..
those are good numbers im making 217hp on 93 YCP ITR reps 84mm manley rods tuner 3 cams 74mm TB i just put together a 13:7.1 acording to wiseco this one is going on E85
EBTEC!!! and James Emimo I gotta head back there
I traded my victorX for the performer X since I'm going all motor, is the PerformerX comparable to the ultra street or is the ultra street still way better?
@@DistrictDRIVE performer X probably good, I have no experience with it but I can swear by the Ultra..
@@KHRIS718 I'll see what numbers it makes next week with an 11:5:1 B20 & B16 head running skunk2 tuner 3 cams, if I'm not satisfied with the numbers I might try the skunk2
Alex is a special person, the world could use more people like him....keep it up buddy
Mad respect for what you guys do with the cars and even more for extending help to those in need. God bless you guys
Y'all really live up to your name. Bless you guys!
You guys are very legit people helping out these people in this time of need keep up the great content and stay blessed guys
It's the thought that counts bruhh. To actually follow through and help people shows that your not only just thinking about people but changing people's lives. Love u guys at humble performance true happiness is within one.
Bolo's cars have definitely been super informative as far as learning how an individual would want to build their own cars. Love y'alls videos. Hope I get to meet yall again at WCF.
Glad to see you post a video! You have a HUGE HEART! Personally I don’t need any help, I like to send small car builders with small channels little items to help them out, like camera tripods, microphones, paint mixing sticks, and bondo mixing sheets so they can do bodywork and paint on the channel. Like the little guys that aren’t sponsored by big corporations. And watch the projects from start to finish. A few VW channels, and Garage Idiots. I am surprised what a little help can do in the end. Love your channel, and will never forget what you did for Kyle from Boosted Boiz! Keep up the great work I will be watching every step of the way!
Bro you are already helping out thousands, giving the knowledge and hope even through these videos truly does hope. Keep it up man. Hoping one day I'll get to meet the whole team in person.
Man since the first day I found humble I can’t stop watching you the humbleness of Alex no we so el boricua Gordo es el bolo pero a ese tipo le tengo I’m respeto ese hombre arregla lo ke sea I wish I could take classes from him on how to get my car running oem or just dam good nothing fancy which I hadn’t lost my job if not I be sending my Honda that way even for a tune up man 😭HUMBLE And HONDA FOREVER
Thanks for the like and on my setup do I just get a bigger port and also port the head just slightly I got a Jdm h22 and all I did was remove the butterflies and eliminate all the coolant lines so it’s just a big u but ima take it off and port all that shit all motor gang for life
Your very kind Alex helping out people that needed it! I haven’t seen no one in RUclips Honda game doing this. No offense to others. Que te bendiga Dios mi hermano!
We are trying 🙌🏻
RLA 82 this is gonna be a long message I hope you guys read it!! You may not have seen it, but I have. I won’t put his name out there, because I’m not sure if he’d want me to. He got together with his followers and everything the following gave, he matched dollar for dollar and was able to bless a few families with $each. He’s on the east coast and is in the Honda game. What he’s done for the sport, his followers and the Honda game is something I’ve never ever seen. ABSOLUTELY NO DISRESPECT TO TEAM HUMBLE!! I RESPECT AND LOVE YOU GUYS AND EVERYTHING YOU GUYS DO!! Acho mano tienes un corazón de oro Alex! Le pido a Dios que te ayude, acompañe en todo sea para ti, tu hogar, el negocio, pero especialmente ayudando a toda las familias! Dios te continúe bendiciendo a ti, tu hermosa familia, negocio, los muchachos, todos tus proyectos y que los continúe ayudando para que puedas seguir ayudando a todos que estén necesitados. Que Dios te bendiga grandemente hoy, mañana y siempre!!!! Your videos are always so much fun to watch, because to this day I have yet to see anything remotely close to being the same in any video you put out! Not even the Dyno sessions are the same! Which for/to me is beyond great, because I get bored/turned off really quick!! You have some vids that in SOME ways resemble each other, but again, NOT the same. The reason I say they in ways resemble each other is because one video can help better understand the message/point of the other. You guys, your team/group/shop family are extremely knowledgeable!! I mean this in the literal sense AND in no way, shape or form are y’all afraid of sharing/showing it!! Watching these guys as they work on any project is always interesting, fun AND educational!! Like I said before I respect you guys and everything you do!!!!
Brought tears to my eye bro. Nothing but love.
-The most selfish thing you can do in this world is help someone else!-
Humble Performance I've recently started seeing these car and car parts raffles where you buy a limited spot and the winner (chosen at random) gets the car or part and other randomly selected winners get cash prizes. Im not sure exactly whats involved in doing this but maybe this can be an idea you can use to give money to more people who need it. Hope this isnt a dumb idea. Love your content btw.
Guys you Inspire a lot of people , Great Channel i ever seen keep up the great job. Thanks for All you do and share with us . ONe day i will have yall build me an all motor K, saving $
now lol
A great tuner and a great man. Thanks for being you!
When your 4 banger rumbles like a cammed v8
Love it
Hey Alex keep up the good work it’s awesome what your doing trying to help people out it’s above and way more then you need to do it’s amazing I personally don’t need the money rite now life is treating me pretty well lately but really you have helped out more then 1000 people just since corona has pretty much stopped the world I love see your notification it helps me get through the hard times but I’ve been there and giving any amount of money to someone in need can really change there life show them there’s still good people out there that do not know the person at all but is willing to help and getting nothing in return keep up the good work and great videos I just started tunning not long ago I just tuned my first turbo Honda from scratch just a d16 y8 but one day I’ll tune my 450whp prelude myself ! I reallylove hearing all the little tricks of the trade and it has helped me out already countless Times if you could do some screen capture that would be awesome but if not keep doing what your doing
You guys inspire me everyday to keep hustling and being HUMBLE .. u guys are the best!!
Yes. For those that didnt know, the power-band shifts around between different manifolds, even the stock GSR manifold is a good street manifold. VictorX is better for Turbo/Top End performance
Always Hamble stay Hamble my favorite RUclips channel I got in the game watching this channel almost every day, I spend 6k for
my ek hatchback I’m in New York a one of my dreams is visiting your shop , god bless you guys thank you for your channel and stay humble
Now I know why people call you guys humble performance stay humble my friend be safe
🔥🙏🙏 blezzingz to for doing what you're doing to help those that need the help thru this time 💪💪
Great people over there at Humble Performance
how can ppl give this vid a thumbs down fred smh. God bless me keep it up. when all this is over i will be gettin remote tuned!!!
Man Alex reminds me of my uncle explaining engine talk in my pre teen days !! Good stuff very Humble!!
Bolos car is super clean . That’s what I need in my life as a commuter , clean coupe with 200-220 whp make driving back and fourth to work something to look forward to.
I would love to see a comparison for the skunk2 Ultra intake street version
Same
Agree
Same here! Also, what are the pros vs cons of stock itr throttle body vs ported to 70mm skunk2 on itr manifold? Movement of power band or increase across the range? I’m currently running a stock itr with IHE and looking for street power adders. Tuning on S300 as soon as COVID settles down. Love the content. Thanks for dropping awesome content/knowledge @humbleperformance!
Same here. I dont think i have seen a good comparison with the skunk2 vs other manifolds. Also, I remember the edelbrock performer x being the best manifold for a all motor street car.
I would like to see that! I have a ultra right now I feel like I lost mid range but screams top end
My dudes! I tuned in for the jampack of info but glad I caught the episdoe to see the 1st person helped! Much love Humble! Continually livin up to that name and doin it in God's name!! Word and God bless!!
I respect Alex humility and kindness.
🙏🏻
This is exactly the kind of content ive been looking for, wish i could take my car to you! Thanks for all the knowledge my brothers! Much love from Reno Nevada!
Big up humble for helping others out that's sick for sure and that s what makes you guys chill as f..k
Your videos helps a lot keep it up Stay Humble for more performance
Keep humble, and the best part is the shirt of Curete PR ❤️ 🇵🇷
You guys are doing very well and I bless everyone from Puerto Rico
@HumblePerformance, highly respected up in the north east. Great content fellas 👍
We appreciate u ceasar helping out others is amazing, may God bless u and your team .
So when is Bolo VS Kenny? also great thing you guys are doing ! all about heart!
Dee10 BIG FACTS! All about heart!!
I love the fact I have 2 lil girls as well, both healthy. God provides me everyday in his love I have been without a job sense the beginning but God has a plan for us all. Love you guys
Great to see you guys. The ramble is always good.
Gotta luv & respect the humble team some great guys 💯🙏🏽
Humble performance is so humbling 👍
great info! thanks for being you! much appreciated!
God bless you all man keep it up humble ✌🏽🇵🇷
Keep on doing the gud work Alex and the team
You can always count on humble performance for honda knowledge
HP FTW!!!!!! Love you guys thanks for the help..
God bless these guys man. They're too real.
Love this channel, i learn something new every time i watch, you guys are superb!
Kudos for being charitable
Nice man..did you bore out the ITR intake manifold?70mm or 72mm?
Good comparison. I didn't notice you guys putting ice on the edelbrock manifold, at least not from what I saw in the vid.
Its so awesome wat your doing too help use in every way u can like I said you have a great heart man keep doing wat your doing even if I didn’t get it it still touches my heart just knowing that if u could u would help use all thank you again #keepitreal
You guys are the best stay safe stay blessed
🙌🏻
God bless you for helping ppl in need!🙏🏼
Go for shorter intake plenum for high rpm power. Longer intake plenum will lower down your power curve down below. Assuming the diameters of the plenum stay the same.
You had me at comparison!
These the type videos I LOVE TO SEE KEEP IT UP GUYS 👌👌👌👌👌
What beaufitul data!📈📉
What Rpm does Vtec engage. Sounds like 4300-4500rpm?
Love comparison videos keep them coming
This is the perfect example of "peak numbers don't tell the whole story". Intake manifolds are all about mid-range torque
Great videos fellas, one quick question. Where did you purchase the piping to go on Bolos car? And what size did you get from the header back
Appreciate the knowledge. Thanks guys
This is the shit I'm talking bout !!! 💪😎
Depends on your driving Kenny! If you can drive it then you got it.
You have a big heart, thanks.
You guys did good man!
Great video guys
HONESTLY I ENJOY LISTENING TO ALEX SPREAD HIS PERSONAL EXPERIENCE AND KNOWLEDGE ITS A BLESSING IN IT SELF AND AS I POSTED A FEW TIMES ALREADY YOU REACHING OUT TO HELP THE PEOPLE WHO NEED IT IS AMAZING I ACTUALLY TOLD MY WIFE ABOUT IT AND WE WATCHED THE VIDEOS AND SHE TEARED UP BECAUSE FOR SOMEONE LIKE HUMBLE TO OFFER HELP TO FAMILYS LIKE OURS WHO ARE STRUGGLING TO SURVIVE DURING THIS TERRIBLE TIME IS AMAZING AND SHE SAID THAT IF ALEX PICKS US SHE WANTS TO THANK YOU GUYS BY DONATING MONEY BACK WHEN OUR FAMILY GETS OUR LIVES BACK TO NORMAL AND WE CAN ACTUALLY GET TO WORK AND SHE MADE ME REALIZE HOW MUCH IT MEANS TO HAVE A COMPANY LIKE HUMBLE A GUY LIKE ALEX WHO CARES AND WE WISH MORE PEOPLE COULD HAVE THAT KIND OF HEART SO THANK YOU GUYS FOR BEING SO AMAZING AND OUR FAMILY WANTS TO THANK YOU FOR HELPING OTHERS WE HOPE YOU PICK US BUT IF NOT WE WILL BE HAPPY FOR WHO EVER YOU PICK SO FROM MY WIFE ME AND OUR 3 KIDS THANK YOU AND KEEP SPREADING LOVE
STAT HUMBLE
Awesome content as always, when are you guys gomma do a live chat with us please
Kenny and bolo need to drive down to Mexico and line up!!
Word that CRX! Reppin PFI and Colorado!!🤙
Good informative video. I look forward to the mega phone video...
You guys and Bodevision have the best damn intros!!!
hey so im wondering when it comes to building a B20v with PHK-00 pistons and 12mm stage 2 cams- would you guys port out your valve reliefs and weigh them, or would you degree them, or both?
Nice informational video guys
Seria excelente que abrieran un Canal en español!
Siii a mi me interesa mucho el tema pero no se ingles
awesome vid! thx for the knowledge !
Pretty instructive video, you guys should makes one of rbc vs ultra street on a stock k20 🔥
Josue Espada - In the works !
nicee! Can't wait to see the results 💪🔥
nicee! Can't wait to see the results 💪🔥
Big mike on humble 🔥✌🏽🇵🇷
Love the deail in these vids and the channel.. Quick question What would be a good intake for b16a running ctr pistons 12:1 cr integra cams, was thinking itr intake and 68mm tb? Any help would be appreciated just want a happy motor
Stock ITR parts are so good, that in many cases, aftermarket mods net a loss over stock!
I know this is a few months old but Alex you really touched me when you were speaking about giving away money. Let me know when you decide to do it again. I really want to help, especially right now. I'm a truck driver and window tinter on the side to make extra money. I'm a honda man for life. I had a 95 HB with a 98R swap but sold it. I had the crx with a b16 and a 90 DA with a ls/vtec that I built myself. Anyways let me know if you decide to do it again because I would love to help.
Happy af i just bought a type r manifold... for 100 too 😭😭
Great video
Have you tested the bigger TB is better?
Stock itr TB (62mm) not better on itr intake manifold as 70mm?
Love from Texas ✊🏽👌🏽
you guys hace a good thing there,, Keep it up,, ✌🇵🇷
What's that motors setup? I also have a built b20v and I'm trying different bolt ons and cams. I'm looking for 220ish also
Great video
If I were chosen just send the funds to the follower ceased, stay strong
What’s the build info? I’m looking into a B20v
What cams are you running in the b20? Please and thank you
HAVE YALL EVER thought of building all motor K and have it raffled in certain amount of tickets( for the cost of motor+ your labor cost) it would be very popular at least we know its built the right way.. I would love to hear if you guys would entertain that IDEA.
What about the stock sleeves? Are they as reliable as the B16/B18 for a mild setup around 180whp revving to about 8200rpm?
I have a b20b w/ p8r head, topmount exhaust manifold, gt3582, and a stock ls manifold. I already have the victorx, should I even install it?
Holy shit! I didnt know any honda did 8's. Following
Skunk2 vs Pro-Jay!! Shout out Kyle BB & PFI fo life!!
Hi! I have a b18b non vtec with BC cams p72 pistons
Do you think the edelbrock IM can help me more than the stock p75 IM? I am located at 2800msnm
The big manifold like H22A and F20b skunk2 intake manifold B SERIES MANIFOLD IT SOUNDED CRAZY AND WAS FAST AE engine dynamics manifold could get chrome or regular crazy fast 3RD GEAR PULL LIKE A MOTORCYCLE ALL MOTOR