Cold Air Intake mod, 7th Gen Celica, Short ram intake. What are these three plugs. read video desc.
HTML-код
- Опубликовано: 6 сен 2024
- 7 th Gen Celica stock air box... What are the Three plugs for?
The vent hose at about 3:12 mark, A small filter could be put on that hose. It just draws in filtered air when the system purges the evap canister.
The blue plug and the black plug (center one in pic at 0:20) can be swapped (same shape). If they are it will cause start/ idle problems especially after filling with fuel. Happened to my GT-S
It’s very important not to accidentally put the blue plug on the vsv valve. I made that mistake and everytime I put gas in my car it would stall and it’s because the blue plug caused the vsv valve to stick open and suck raw gas through the line stalling finally fixed the problem a while back but it’s an easy mix up since they’re the same design plug and will swap places if not done correctly
Thank you so much it took me days to figure this out
Just what I needed, I don't even know why I bother with forums these days. Almost everyone just sends me to your channel. Lol
This saved me tons of time and headache. Thank you for explaining each part. I was able to install a ram intake with the info. The info about the last plug was extremely helpful.
Thanks for the comment. I've seen these plugs not connected on a few cars. So I thought this would help someone.
Purchasing an 03 with a short ram,but live in S.Florida and when it rains it pours and i don't trust the short ram in wet conditions.........will be going back to the OEM airbox... would rather loose a few horses than lose an engine......thank you for the explanation.
Thanks for taking time to comment.
This is fantastic concise information. Thanks for this.
Great info, thanks for sharing with the community \m/
Massive help, my butterfly valve's been stuck shut and I thought it was normal to be so stiff 😂
👍
Thanks
Love how well explained this video is 👍🏻👍🏻👍🏻
thank you
Brilliant video - please cut some more things open :-) Seriously never knew what that chamber was for. 5 x 5 for clarity
Thanks . I just had to know what was in there......
Really good explanation...helped me alot..👍👍👍
Good to hear that it helped
helped a ton!
Helped me today!! Great video
Glad it helped!
What is the part specifically called that connects the the green wire?
I recently installed a short ram intake and found out I don't have a vent valve and only 2 plugs (vacuum and butterfly valve). If it had been removed by the previous owner, I'd have no idea why they would've done that
That is strange. Usually they are just disconnected and left hanging.
What purpose does the the big hole have (when looking at it: bottom, lower right nozzle) Is there a hose i need, or need to connect ?
I find these motors so inconsistent, my 2005 1zzfe has the rocker cover brether hoses connected straight into the throttle body
Do you have a video about how to install a aftermarket intake on a 2zz engine? And where the vacuum holes are connected
I do not. 😕
😫
i have a 2000 celica gts the VSV hoses are just plugged closed with my ram air intake, got the car like this and it runs funky. i CANT find vacuum diagrams anywhere!!! anyhelp? i need to replace my intake with another short ram, with proper vacuum hoses, i just need to know where everything goes!
Just Anon I covered what I know about it in the video. I just checked.. a Google search of "2000 Toyota Celica vsv diagram" will get several good diagrams.
What does the little breather valve do the one that gets filtered air
It's all part of the fuel tank vent and purge system. So I would guess it is air intake for evap purge cycle.
I'm not taken my baby to this guy. He'll saw her up. Just kidding.
Chop chop🪚 lol
So.. Scott, what would happen if the vacuum valve isnt plugged?
If your refering to the vucuum port on the intake (with the hose hooked to it). possibly high idle or the idle will not be steady (rev up abit and drop)
OK. See i asked because I have a short ram intake and run rich. This how I got the vehicle from the previous owner. Also its the GTS, and in M mode downshifting, or any decreasing speed if I touch gas or tap it continuously, it pops and gurgles, sometimes spits flames. Exhaust is straight piped with CAT and resonator. I changed the muffler to a Jaguar triangle shaped one to quiet it down a bit. I like the pops and flames, but I haven't figured out why it does this. It is really fun to drive tho. Any idea why it would do this? I even rebuilt the engine, same thing happens.
Taking to much time.
The vacuum valve plug on my 2001 Celica has one of the wires severed from rough handling. Am I able to simply solder the wires (or even use electrical tape) or do I need a full replacement?
Yes you can just repair the wire
@@TSRGarage Thanks, I wasnt too sure. I was still going to try it anyway but now there's confirmation.