I'm a park ranger, I mostly talk history, there is nothing I do that is likely to ever require an impact wrench, yet I find these videos absolutely fascinating.
I've had my dcf899 for over 3 years, I use it everyday at my work as a trash truck mechanic. It's still kicking, it's all beat up but has never let me down
Sadly, I lost mine Thursday. Truck got towed in. I went out and used my impact to put the driveshaft back in. I put in the passenger side floorboard and drove into the shop to replace the busted coolant hose. Last night, I noticed it missing from my toolbox and it took me a minute before I realized where I left it. I'll call their home shop monday and see if I can get it back. If not, guess I finally have an excuse to buy the Milwaukee
I've heard Dewalt will be releasing an 899 replacement next year, but we'll see how much truth is in that. They did awesome at the 901 this year even beating the Milwaukee, so they obviously have the Engineers and knowledge to put out awesome tools.
@@CaseySexton I hope so, I wouldn't mind seeing an updated replacement, maybe one that can take full advantage of Flexvolt batteries or just adding Power Detect? I hope they also bring out some more automotive focused tools like a cordless ratchet that's not Mac Tools branded. ;)
This Dewalt high torque is the impact that really introduced me to battery impacts about 5 years ago. Now i have a mixture of Dewalt, Makita, and Milwaukee and the air tools are not touched. I keep wanting to upgrade to the Milwaukee high torque but the Dewalt just keeps going strong.
@@randallsensenig1075 I find that funny I use my milwaukee every single day have had it since it came out never had to rebuild it. Had it over 4 years.
I have had this Dewalt for almost 3 years now and have loved it. I work on dump trucks, pickups, tractors, and heavy machinery so it gets used fairly often. Battery lasts pretty good too. I got a 3/8 atomic Dewalt this past Christmas and I have to stop myself from using it sometimes haha its so nice. Anyway, I know Milwaukee is better in most cases and I do like their slimmer and more compact batteries and the tool designs that come along with that, but I have a personal reason for sticking with Dewalt. I bought my dad a drill/impact set years ago, and just a few weeks later our house burned down. Everyone was safe, not going into much detail on that, but as with everything else in the house I was sure that the tools were a loss. A week after the fire, I found the tools. Still in the (open) bag, covered in ash and snow as it was the middle of January. Pulled both tools out and batteries were still completely charged. Still in use over 4 years later and haven't skipped a beat. I'll go Dewalt all day. If they won't take it off, I'll hook up the old 3/4 IR and let it eat.
I absolutely love this channel. Honestly, the professional way you conduct the tests and your chill, even keel, level headed tone and objective mindset make it an absolute joy to watch. Keep it up!
I love this channel. The only thing I have to suggest is setting up a break away test. Tighten a nut to the advertised or claimed torque rating and see if the impact can break it away. Also test other competitors on others advertised torque specs. It would add some content and also show us the real world capability in a controlled environment.
Because I have a 3/8s compact 3/8s 1/2 mid torque 1/2 and 3/4 inch high torque The mid torques won’t break away a bolt after tightening it with the high torque for like literally 2 seconds Even my mid torques struggle to break away bolts I put on with them on level 3 on level 2 after only being hammered on for maybe 2 seconds.
These tests are great, but one thing that is rarely ever covered in these head-2-head comparisons is duty cycle. There are a lot of inexpensive impacts on the market that may or may not out-torque a 'team yellow' or 'team red' product...but I what I want to know is which one will smoke itself into flaming oblivion the fastest under the same conditions, same load and same continuous duty cycle. Personally I'd be willing to give up some torque for a tool that has things like robust electronics and proper heat sinks in the right places....and I have a feeling if you go cheap with a price product like the Flex you'll find yourself shopping for a new one in short order.
I have a margarita in hand and fired up the Torque Test Channel. To my delight, I see my DCF899 up to bat... great timing, and just what I needed after a lonnnnng week. P.S. I'm willing to strap on... if you are...
Pretty awesome content! You guys are hitting the mark without any of the added BS that accompanies a lot of channels that test. Not only that, you make the testing as apples to apples as possible, pointing out the differences along the way. Keep on keeping on!
Battery prices for this type equipment is a fucking ripoff. There's no way in hell they are worth their high ass cost. I'm betting there isn't $10 max in production
@@timbow50 I think about $15 since they use good branded cells but obviously they wouldn’t pay retail for them and the housing isn’t expensive either. They do mark up batteries really high.
Bought me a Dewalt DCF899 about a year ago from Home Depot it was on sale for $199. Came 4ah battery and charger. A Dewalt Rep also gave me a free 4ah battery. What a deal.
Great video bro it is pleasant to see my m18 beast can win this competition, now we need to see Ingersoll Rand high torque in this competition I am almost convinced that it wil top off Milwaukee and other brands.
@@Beardman56 well I guess you R wrong just check out this video, I guess Milwaukee skipped Ingersoll Rand impact wrench? ruclips.net/video/0QHT5ser8ow/видео.html
I’m so happy for this channel. I really appreciate you guys. I owned a m18 high torque for about a year, and although in only a year, it is acting up, I’m sending it in for a new one thanks to warranty. I did however buy a 6.0 high output and MAN am I glad I did. MASSIVE power difference and definitely a purchase that you influenced (in a good way) thank you all so much :)
I have one of the first Kobalt 1/2 inch drives. Serial number 00049 it's like 7 years old now and its still kicking funny how its just barely stronger than my new 3/8 impacts but I'm curious to see how much they have changed.
Upgraded from an older 18v kit. ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
I love my Milwaukee high torque impact, it’s a beast! Only found one rusted fastener on a lawnmower blade that wouldn’t budge it until the torches came out.
Starting a RUclips channel, makes me keenly aware that 83,000 views, barely yields 1600 reactions and only a few subscribers. I hate that it works that way. Great content.
I just picked up the DeWalt DCF899 yesterday for my father as an Xmas gift this year. Our local Runnings has a deal going on until the end of December for DeWalt tools so I got the M1 kit with the 4 Ah battery for $248 with tax. The sale also included a set of DeWalt branded 1/2" deep well impact sockets as a free add-on. He currently has a smaller compact 3/8" DeWalt unit so I figured this big one would help him out with tougher bolts on his fuel trucks. Since the sockets are $40 on their own I pretty much paid $208 for the gun kit. :)
Would love to have seen what size battery he used on Milwaukee as a user of dewalt and Milwaukee and Makita I know for a fact that if you don’t use equivalent size batteries it changes the torque drastically
Yes. But it is insightful just how much more tool coverage the M18 system has. They're iterating faster, releasing new tools more often, etc. Dewalt still doesn't have a cordless ratchet (M12, I know) for example. If I was to do it over again I'd go with Milwaukee instead of my Dewalt.
LISTEN,,, WE WERE ACTUALLY,,, SUGGIEING FOR THIS NEXT VIDEO IT'S A GOOD THING IT CAME WHEN IT DID. YOU GUYS ARE KILLING IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
In my world, voltage is electromotive force (EMF). It shouldn't matter what the capacity (measured in Ampere/hour) is with re to the strength of the tool. The capacity only determines the duration the battery can maintain its optimum operating voltage. I would love to see a voltmeter attached to the battery output terminals to see if the tool's or battery's circuitry adjusts the output voltage while the tool is in use. Then I would say that capacity is a significant contributor to the tools torque capability.
I bought the Model 899 to use at work in early 2020. Love this gun. It does everything I need and very well made. Would not buy any other gun. This is all your ever going to need folks. This thing is a beast.😊
In the UK we have a brand called Kielder. They are tools made by mechanics, for mechanics. (rally team engineers actually) before Milwaukee gen 2 mid torque was released they claimed to have market leading power to size / weight impact wrench. I have owned them for years now. Left out in rain for 2 days by mistake but still smacks my nuts hard! Also great value for money much cheaper than most. Basic with no LED ect. But very good. I would like.to send you mine but I'm all the way in England and use it all the time. Love your channel man. Keep it up. Thanks.
I just bought the Flex 1/2" impact kit for $229 at Lowes. The Limited Lifetime Warranty still applies if registered in 30 days and bought before December 31, 2023. Some of the "bare" tools are that much in other brands. Lifetime Warranty on the tool and up to 3 battery replacements is an awesome deal. Hopefully FLEX will start selling tools without having to buy a full kit! I'm sending the SEESII back to Amazon that I just ordered last week.
I already had many black and yellow tools and picked up this DeWalt high-torque kit with battery and charger for $200 just a few months ago. For that price, I think it does ok. I know you guys kind of knock DeWalt for a physical power level switch as "dated", but I see that as an advantage. Physical switches tend to hold up better than mode buttons in my experience. If you're looking for a high-torque tool now and are not committed to a brand already, it is probably worth looking around. Thanks for testing more DeWalt tools lately! Really enjoying your channel!
Time will tell but are you thinking about the old bubble buttons that would wear out over time. I personally think the way they’re doing buttons now, they will last a lot longer. Even the switches can have issues. I’m pretty sure it’s just moving a lever that can break. As long as it works, we’re all winners with any of these tools
i wonder if a impact driver/wrench would perfom better if it isnt held in hands, but in a fixed position. my thoughts are, that the hand absorbs quite a bit of the punch. eould be nice to see that testet
Metabo HPT makes a few impact wrenches. An 18v 1/2", a 36v 1/2", and a 36v 3/4" model. A unique feature is the 36v tools can be run by an ac/dc adapter. I have the low torque 18v 1/2 which claims "225 ft-lbs of turning torque, 0-3,600 BPM and up to 2,700 RPM".
Great vid, thanks! This only confirms why my purchase of the Milwaukee is a very good investment. Add One Key to the mix (to customise the settings), and you have a clear justification for spending the dollars on the big M
Can we see the Dewalt DCF899 with a 60v 9AH? We had a old test rig with 1in grade 9 hex socket head bolts for isostatic pressing to 40,000psi static pressure and about 20 bolts that needed un.... doing and the 60v battery made a huge difference!
@@TorqueTestChannel hey just a thought but I do own one. Would you be interested in using it to test with? As much as I hate messing with shipping I would be willing to ship it to you for your video and when you are done just ship it back to me. If you're interested the offer is there.
Great video, always happy to see you’ve posted another. Wore out a DCF889 within 6 months. It doesn’t like being used for high torque IMO, you can hear in the 15 BCS the beginning of the death rattle, sounds like skipping gear teeth, keep using it like that and the motor dies a smokey hot one. I’m impressed by Milwaukee no end, but it’s pricey in the UK. Makita is my choice, home and work, and at least they put up with the abuse.
Good video! Two of the videos you shown at the end of the youtube search results are my videos, testing the dewalt dcf899 and the milwaukee 2767 on semi truck lug nuts, and I can confirm that the milwaukee is much stronger in real world results also. I have also tested milwaukee 2864 3/4 vs 2767 1/2 against each other on semi lugs just to see if the 3/4 was noticeably stronger and it was. Dewalt list its 3/4 the same as the 1/2, so although I haven't tested one I wouldn't expect any difference between it and their 1/2 dcf899.
@@jkahn7365 They're all big and bulky and similar in price on sale or gray market (ebay, offerup, marketplace, etc). Just go with what ecosystem you're in or plan to be in...I'm in makita 18v and Milwaukee 12v.
Can't wait to see the Bosch High impact Model #GDS18V-740N results. If you get your hands on one, I'll buy it off you after the tests... Been waiting for Bosch to step it up... So many battery's...
i was just wondering if you could do a test between the dewalt high torque with a 5ah xr 20volt and the 9ah 20v/60v flex volt batteries. i know the flex volt wakes them up a bit but i was curious to see how much
I came across a video quite recently where a slimmer, lighter socket was not able to loosen a nut where as a thicker, heavier one did manage. Lots of comments speculating left and right without much theory to support it. Perhaps you could take a shot at it?
I've had the dcf899 since 2015 when it was brand new. It's pretty good, however the vibration takes its toll on the batteries. The mode select switch gave out once, and if you don't take the head off and grease it once in a while the bushing up front will wear out badly. Might choose another brand to replace it.
That's because when it's brand new Dewalt cheaps out on grease and literally sticks a SMALL DAB in there. I heard about this before I bought mine so I took it apart and added a few GOBS
@@marcoeis6598 a large amount is unnecessary and actually can hinder performance by cushioning the blows from the hammer mechanism. Just a little bit of quality grease added occasionally will do it.
You'd win my heart if you could manage to run a Milwaukee 1" D-Handle impact wrench vs a few other pneumatic or battery 1" guns. It boasts a 2000ft-lbs breakaway torque, and I want to see how it really shows up
Can you test out the kobalt 1/2 XTR? I bought the older version of it for 100 dollars and I love it. The battery life is awesome. I let my friends shop and his mechanics use it for about 2 weeks and they absolutely love it.
I know that Dewalt didn't provide a better battery in the kits for the 899 (providing 18650 instead of 21700) but what's the harm with providing another test with a 21700? When you tested the Ridgid you went back later and used an octane battery (21700) and I believe the M18 XC5.0 used in the video is also a 21700, which kudos to Milwaukee, did include in their kit.
The XC5.0 is a bare bones 18650 pack, similar to the DeWalt 5ah pack. We test what comes in the kits, because that's what the brands are trying to sell you on with the numbers that are printed on the box. The XR 5ah appears to us to be a great pack. The non octane from Ridgid was quite trash.
How about the Bosch - IWHT180B Bosch 18V High Torque Impact Wrench? Bare tool $265 . There is also the new Bosch GDS18V-740N from the Profactor line. Another one to look at is how dose DeWalt and brother company MAC tools compare for impacts. Are they just re-shelled DeWalt or different?
I kinda wanna see a snap on air impact. Or even the electric. My coworker says his air snapon is 100% the way to go. I like my m18 hightorque. Cause usually it either breaks the bolt or removes it lol
I own a snap on mg725(stronger then there pt850) that is brand new, and an m18 fuel high torque. The m18 fuel is the superior impact both in strength and ease of use
As a dewalt flexvolt user, I'd like to at least see a quick review of the dewalt with a 6ah flexvolt battery compared to an xr 4 or 5. Would be interesting, for me at least. 👍
Not much different busy lent me his DeWalt and I threw my flexvolts on it when his XR battery ran outta juice. Not holding my breath for the (most likely) upcoming 60v 1/2 DeWalt since their new 60v recipe saw got it's ass handed to it by the old milwuakee super saw
I would like to see how much torque you lose as the battery depletes. Milwaukee tools noticeably turn down at 2 bars. My hope is it maintains max torque until 3 bars.
Would like to see what lvl 1 and 2 torque graphs look like especially with the DCF899. Doesn't look like it reaches their max fastening torque specs on Dewalt's site. Curious how close they come to the advertised ratings on 1 and 2 as well. Thanks
Can you guys do tests on 1” impact guns? I’d be happy to send you our ingersoll rand 2850max air gun that has 5’ of 3/4” hose whip thing is a beast. Be interesting to test against the Milwaukee 1”
Drilling with Milwau: I drained the battery and with only 5 minutes of re-charge I could drill and make more holes in a wall, just for a "quick job" it works, you can work for a few minutes.
I own the Milwaukee but in the 3/4 drive would love to the the difference between the 1/2inch. I'm a diesel mechanic, use it on wheel nuts almost everyday,
I would like to know how the m12 9.0 waitleys do on the stubby. For 37 doll hairs I capacity tested one and got 8.0 out of it. Granted that was a 2 amp discharge. I have bought some other knock off batteries and they weren’t worth throwing at your enemies. It’s really hit and miss when it comes to knockoffs. The waitleys 9.0 has always done good. Two batteries both testing at 8.0 actual capacity
Can you test a snap on 1/2in magnesium air impact? I'm a diesel tech student and I have a student discount for both matco and snap on but I'm not sure which one I should get.
I'm a dewalt guy, but I think I would go with the milwaukee for an impact for working on the car. I'm in canada, so there is rust, but I would buy that and 2 batteries for it if it meant it would perform better and get those Rusty stuck nuts loose. Thoughts?
the dewalt (im not trashing this specific brand) gave me after a 30s of full power on a bolt which wouldn't came a wrist sprain injury. now i cant work on anything related to automobile cause as you may know you need your full mobility to work. im healing quick but it's pain to wait 2-3 week plus exercices... so heres my question : didnt you feel anything when operating such tool ? may you hold it a certain way ? thanks for your sharing.
I hope this tool's successor keeps being made in the USA. I like that tidbit, I can't speak for everybody but I try to prioritize buying domestically-made products
I have the Makita XWT08 high impact gun and I would be willing to lend it to you for a test. With a 2 MaH battery its plenty strong for working on my cars. I liked your video for the mid torque Makita and I think that would have worked for me too but the price is almost the same for the high torque.
I'd like to see if the extended anvil impacts have the same torque loss as using an extension of the same length, or if it's worth keeping another impact around for those tasks. Ah hell, who am I fooling. Any excuse to buy more tools, right?
It would be very practical if you had a website for us to search our tools and check out the specs with affiliate links to buy the tools from your website
I'm a park ranger, I mostly talk history, there is nothing I do that is likely to ever require an impact wrench, yet I find these videos absolutely fascinating.
You made my day
Yes Sir, I totally agree with you. I love this Awesome channel and these kinds of videos. I learn so very much. 😎
@@FAMOUSSLICKRICK 9
@@jimmylewis3501 10
Throw one in your truck, next time you come across someone in the park with a flat tyre they'll think you're a God amongst men
I've had my dcf899 for over 3 years, I use it everyday at my work as a trash truck mechanic. It's still kicking, it's all beat up but has never let me down
I honestly didn't know there were mechanics dedicated entirely to trash trucks.
@@elijahwatson8119 there's mechanic's dedicated to everything. Trash trucks, forklifts, tractor trailers, etc.
@@elijahwatson8119 Truck work has lots of fleets. A lot of fleets have in-house wrench pullers
'Murica!*
*with global materials
Sadly, I lost mine Thursday. Truck got towed in. I went out and used my impact to put the driveshaft back in. I put in the passenger side floorboard and drove into the shop to replace the busted coolant hose. Last night, I noticed it missing from my toolbox and it took me a minute before I realized where I left it. I'll call their home shop monday and see if I can get it back. If not, guess I finally have an excuse to buy the Milwaukee
Thank you for testing the DCF899, had mine since 2016 (Type 1), nice to see it still stacks up against the modern competition. :)
The Milwaukee is anything but modern. Think it was released in 2017 and it’s basically been the king since
Some people really get butt hurt over brands 😂🤣😂
@@johnargumaniz9179 More modern than the DeWalt. DCF899 2015, 2767-20 2017, FX1471-1C 2021.
I've heard Dewalt will be releasing an 899 replacement next year, but we'll see how much truth is in that. They did awesome at the 901 this year even beating the Milwaukee, so they obviously have the Engineers and knowledge to put out awesome tools.
@@CaseySexton I hope so, I wouldn't mind seeing an updated replacement, maybe one that can take full advantage of Flexvolt batteries or just adding Power Detect? I hope they also bring out some more automotive focused tools like a cordless ratchet that's not Mac Tools branded. ;)
This Dewalt high torque is the impact that really introduced me to battery impacts about 5 years ago. Now i have a mixture of Dewalt, Makita, and Milwaukee and the air tools are not touched. I keep wanting to upgrade to the Milwaukee high torque but the Dewalt just keeps going strong.
If you're a mobile mechanic I don't see why you would upgrade until your old one dies.
My Dewalt is 3 years stronger, and if that 5ah battery doesn't get the job done, slap on a flexvolt battery and there she goes!
Yah I love my dewalt, it keeps going strong when my co- workers Milwaukees spend half their time getting rebuilt
@@randallsensenig1075 I find that funny I use my milwaukee every single day have had it since it came out never had to rebuild it. Had it over 4 years.
I have had this Dewalt for almost 3 years now and have loved it. I work on dump trucks, pickups, tractors, and heavy machinery so it gets used fairly often. Battery lasts pretty good too. I got a 3/8 atomic Dewalt this past Christmas and I have to stop myself from using it sometimes haha its so nice. Anyway, I know Milwaukee is better in most cases and I do like their slimmer and more compact batteries and the tool designs that come along with that, but I have a personal reason for sticking with Dewalt. I bought my dad a drill/impact set years ago, and just a few weeks later our house burned down. Everyone was safe, not going into much detail on that, but as with everything else in the house I was sure that the tools were a loss. A week after the fire, I found the tools. Still in the (open) bag, covered in ash and snow as it was the middle of January. Pulled both tools out and batteries were still completely charged. Still in use over 4 years later and haven't skipped a beat. I'll go Dewalt all day. If they won't take it off, I'll hook up the old 3/4 IR and let it eat.
100K subs by the end of May, this channel just keeps churning out more quality content and it's going to pay off very soon!
I would love to see the Makita impact wrenches, both the 18v and the new 40v
WOW, there's a new 40v
Yes please me too
I would like see how the makita full size impact compares as well. @torquetestchannel I would send you mine but its a 3/4 anvil.
@@2ttools35 What's wrong with 3/4"?
They’ll probably be smoked by the Milwaukee. Just saying...
I absolutely love this channel. Honestly, the professional way you conduct the tests and your chill, even keel, level headed tone and objective mindset make it an absolute joy to watch. Keep it up!
Thank you so much!
I love this channel.
The only thing I have to suggest is setting up a break away test.
Tighten a nut to the advertised or claimed torque rating and see if the impact can break it away.
Also test other competitors on others advertised torque specs.
It would add some content and also show us the real world capability in a controlled environment.
Because I have a 3/8s compact
3/8s 1/2 mid torque
1/2 and 3/4 inch high torque
The mid torques won’t break away a bolt after tightening it with the high torque for like literally 2 seconds
Even my mid torques struggle to break away bolts I put on with them on level 3 on level 2 after only being hammered on for maybe 2 seconds.
I've had the Dewalt for years and have broken more seized bolts with it than I would like to admit. That things a beast.
These tests are great, but one thing that is rarely ever covered in these head-2-head comparisons is duty cycle. There are a lot of inexpensive impacts on the market that may or may not out-torque a 'team yellow' or 'team red' product...but I what I want to know is which one will smoke itself into flaming oblivion the fastest under the same conditions, same load and same continuous duty cycle. Personally I'd be willing to give up some torque for a tool that has things like robust electronics and proper heat sinks in the right places....and I have a feeling if you go cheap with a price product like the Flex you'll find yourself shopping for a new one in short order.
Dewalt just released tma newn1/2 called the Dcf900 that destroys every other 1/2 ever made. It's the most powerful 1/2 impact out there period.
@@marcowens3522 check the DCF961 😅
I have a margarita in hand and fired up the Torque Test Channel. To my delight, I see my DCF899 up to bat... great timing, and just what I needed after a lonnnnng week.
P.S. I'm willing to strap on... if you are...
Pretty awesome content! You guys are hitting the mark without any of the added BS that accompanies a lot of channels that test. Not only that, you make the testing as apples to apples as possible, pointing out the differences along the way.
Keep on keeping on!
i got mine last DEC with a 4ah battery for 200 at home depot and bought a flexvolt 6ah and could really feel some difference between the two
IMO dont bother with the Fexvolt 6ah when you can buy the 20v 6ah with 21700s. The difference between the 5ah and 6ah is very noticeable
@@FoxOutdoors if you have flexvolt tools, you probably have them already. I have up to 9ah flexvolts.
@@scytheakse they have 12ah flexvolt also they're the same size as the 9ah
@@juanc5149 mine sounds fine and dont make a odd noise
@@juanc5149 yeah that sounds normal to me
I am definitely in for fake knockoff battery comparisons....☝️
I want that as well please
why? most of them don't even survive a single drop!
Yes, because a 12ah m18 may come with a divorce 🤣
Battery prices for this type equipment is a fucking ripoff. There's no way in hell they are worth their high ass cost. I'm betting there isn't $10 max in production
@@timbow50 I think about $15 since they use good branded cells but obviously they wouldn’t pay retail for them and the housing isn’t expensive either. They do mark up batteries really high.
Bought me a Dewalt DCF899 about a year ago from Home Depot it was on sale for $199. Came 4ah battery and charger. A Dewalt Rep also gave me a free 4ah battery. What a deal.
Smokin deal!
Great video bro it is pleasant to see my m18 beast can win this competition, now we need to see Ingersoll Rand high torque in this competition I am almost convinced that it wil top off Milwaukee and other brands.
@@Beardman56 well I guess you R wrong just check out this video, I guess Milwaukee skipped Ingersoll Rand impact wrench?
ruclips.net/video/0QHT5ser8ow/видео.html
I’m so happy for this channel. I really appreciate you guys. I owned a m18 high torque for about a year, and although in only a year, it is acting up, I’m sending it in for a new one thanks to warranty. I did however buy a 6.0 high output and MAN am I glad I did. MASSIVE power difference and definitely a purchase that you influenced (in a good way) thank you all so much :)
We appreciate you too!
Would love to see how the Kobalt XTR 1/2" high torque impact compares
I just bought one and would love to see what it really makes
@@ferrisguy27 Send it to us :P
I held it in store at Lowe’s, Jesus Christ it’s a heavy beast.
I have one of the first Kobalt 1/2 inch drives. Serial number 00049 it's like 7 years old now and its still kicking funny how its just barely stronger than my new 3/8 impacts but I'm curious to see how much they have changed.
@@TorqueTestChannel pls give me your address, i want to send to you one China big impact wrench. It is so strong.
Upgraded from an older 18v kit. ruclips.net/user/postUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
I love my Milwaukee high torque impact, it’s a beast! Only found one rusted fastener on a lawnmower blade that wouldn’t budge it until the torches came out.
Starting a RUclips channel, makes me keenly aware that 83,000 views, barely yields 1600 reactions and only a few subscribers. I hate that it works that way.
Great content.
I just picked up the DeWalt DCF899 yesterday for my father as an Xmas gift this year. Our local Runnings has a deal going on until the end of December for DeWalt tools so I got the M1 kit with the 4 Ah battery for $248 with tax. The sale also included a set of DeWalt branded 1/2" deep well impact sockets as a free add-on. He currently has a smaller compact 3/8" DeWalt unit so I figured this big one would help him out with tougher bolts on his fuel trucks. Since the sockets are $40 on their own I pretty much paid $208 for the gun kit. :)
Would love to have seen what size battery he used on Milwaukee as a user of dewalt and Milwaukee and Makita I know for a fact that if you don’t use equivalent size batteries it changes the torque drastically
Thanks guy.
You can also look at it like this, the DeWalt is 6 years old and only 18v Vs Flex is 2021 & 24v.
Yes. But it is insightful just how much more tool coverage the M18 system has. They're iterating faster, releasing new tools more often, etc. Dewalt still doesn't have a cordless ratchet (M12, I know) for example. If I was to do it over again I'd go with Milwaukee instead of my Dewalt.
And that at 24V, the FLEX is barely eeking out a win over DeWalt, and not even close to Milwaukee.
Wow. That Flex is heavy!
And it floats! Neat. Big red loyalist here, thanks for backing up my program. Love your show.
Go Big Red!
LISTEN,,, WE WERE ACTUALLY,,, SUGGIEING FOR THIS NEXT VIDEO IT'S A GOOD THING IT CAME WHEN IT DID. YOU GUYS ARE KILLING IT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
In my world, voltage is electromotive force (EMF). It shouldn't matter what the capacity (measured in Ampere/hour) is with re to the strength of the tool. The capacity only determines the duration the battery can maintain its optimum operating voltage. I would love to see a voltmeter attached to the battery output terminals to see if the tool's or battery's circuitry adjusts the output voltage while the tool is in use. Then I would say that capacity is a significant contributor to the tools torque capability.
Thank you. Most people don’t seem to understand that high capacity doesn’t increase power.
I bought the Model 899 to use at work in early 2020. Love this gun. It does everything I need and very well made. Would not buy any other gun. This is all your ever going to need folks. This thing is a beast.😊
In the UK we have a brand called Kielder. They are tools made by mechanics, for mechanics. (rally team engineers actually) before Milwaukee gen 2 mid torque was released they claimed to have market leading power to size / weight impact wrench. I have owned them for years now. Left out in rain for 2 days by mistake but still smacks my nuts hard! Also great value for money much cheaper than most. Basic with no LED ect. But very good. I would like.to send you mine but I'm all the way in England and use it all the time. Love your channel man. Keep it up. Thanks.
Purchased this during the holidays for $199 kit with 4. Plenty of power for oil changes 😅.
A 6 yr old gen 1 , dewalt 899 keeping up with brand new tools is a testament to dewalt making great quality tools in the USA
Home depot has had the 899 kit w/4.0 for $199 as well as lowes this past year or two. Really why I went with it.
I just bought the Flex 1/2" impact kit for $229 at Lowes. The Limited Lifetime Warranty still applies if registered in 30 days and bought before December 31, 2023. Some of the "bare" tools are that much in other brands. Lifetime Warranty on the tool and up to 3 battery replacements is an awesome deal. Hopefully FLEX will start selling tools without having to buy a full kit! I'm sending the SEESII back to Amazon that I just ordered last week.
I already had many black and yellow tools and picked up this DeWalt high-torque kit with battery and charger for $200 just a few months ago. For that price, I think it does ok.
I know you guys kind of knock DeWalt for a physical power level switch as "dated", but I see that as an advantage. Physical switches tend to hold up better than mode buttons in my experience.
If you're looking for a high-torque tool now and are not committed to a brand already, it is probably worth looking around. Thanks for testing more DeWalt tools lately! Really enjoying your channel!
We were split on the switch between us
Very true, they do last longer. AVE discusses this also.
Time will tell but are you thinking about the old bubble buttons that would wear out over time. I personally think the way they’re doing buttons now, they will last a lot longer. Even the switches can have issues. I’m pretty sure it’s just moving a lever that can break. As long as it works, we’re all winners with any of these tools
i wonder if a impact driver/wrench would perfom better if it isnt held in hands, but in a fixed position. my thoughts are, that the hand absorbs quite a bit of the punch. eould be nice to see that testet
Please include the Makita XWT08XVZ, can't compare results without this beast!
Metabo HPT makes a few impact wrenches. An 18v 1/2", a 36v 1/2", and a 36v 3/4" model. A unique feature is the 36v tools can be run by an ac/dc adapter. I have the low torque 18v 1/2 which claims "225 ft-lbs of turning torque, 0-3,600 BPM and up to 2,700 RPM".
The most powerful 1/2 impact cordless is the Ingersoll Rand w7152...do the test and it will amaze you!
Yes!!!!!!
We'll see!
Great vid, thanks! This only confirms why my purchase of the Milwaukee is a very good investment. Add One Key to the mix (to customise the settings), and you have a clear justification for spending the dollars on the big M
Just a heads up boy's, next couple videos are going to be good.
I have the m18 and notice that on lighter duty applications it is smooth as butter compared to weaker tools on the same fasteners.
I bought that Milwaukee and when I did I had no idea it was so powerful. I have loved it. My air impact is now a paper weight.
Can we see the Dewalt DCF899 with a 60v 9AH? We had a old test rig with 1in grade 9 hex socket head bolts for isostatic pressing to 40,000psi static pressure and about 20 bolts that needed un.... doing and the 60v battery made a huge difference!
When are you going to test the kobalt half inch drive XTR?
We're saving for the IR 1,500 lb before that, but it will be making an appearance at some point!
@@TorqueTestChannel and the Makita high torque soon as well?
@@TorqueTestChannel Awesome, looking fwd to it. Thanks for the reply.
@@TorqueTestChannel hey just a thought but I do own one. Would you be interested in using it to test with? As much as I hate messing with shipping I would be willing to ship it to you for your video and when you are done just ship it back to me. If you're interested the offer is there.
@@DoorlessBasher We just bought one :P
Great video, always happy to see you’ve posted another. Wore out a DCF889 within 6 months. It doesn’t like being used for high torque IMO, you can hear in the 15 BCS the beginning of the death rattle, sounds like skipping gear teeth, keep using it like that and the motor dies a smokey hot one.
I’m impressed by Milwaukee no end, but it’s pricey in the UK. Makita is my choice, home and work, and at least they put up with the abuse.
Good video! Two of the videos you shown at the end of the youtube search results are my videos, testing the dewalt dcf899 and the milwaukee 2767 on semi truck lug nuts, and I can confirm that the milwaukee is much stronger in real world results also. I have also tested milwaukee 2864 3/4 vs 2767 1/2 against each other on semi lugs just to see if the 3/4 was noticeably stronger and it was. Dewalt list its 3/4 the same as the 1/2, so although I haven't tested one I wouldn't expect any difference between it and their 1/2 dcf899.
Hey thanks for the confirm! We also got our hands on an m18 3/4"!
I wonder if the makita is in between all 3
I'd like to see how the Mac does agents the DeWalt because it's supposed to be more powerful but both made by DeWalt
@FenstermäkerWJ Yup.
I'm just a home gamer, but my 899 has saved me so much misery over the last couple years that I don't know what I'd do without it.
Thanks for the great details..
Do kobalt xtr high torque impact 1200lb rating
Yes! Can’t find any real test on the xtr. I want to see all options before making a decision on a high torque.
@@jkahn7365 imo, it looks exactly the same as the flex. massive and bulky. just go milwaukee.
@@jkahn7365
They're all big and bulky and similar in price on sale or gray market (ebay, offerup, marketplace, etc). Just go with what ecosystem you're in or plan to be in...I'm in makita 18v and Milwaukee 12v.
Do the test with an 8 or 12ah battery on the flex please. I'd love to see how it helps if at all.
I would like to see a comparison with the newest Mac, Matco, snap on Versus Milwaukee electric 1/2in impacts.
Can't wait to see the Bosch High impact Model #GDS18V-740N results. If you get your hands on one, I'll buy it off you after the tests... Been waiting for Bosch to step it up... So many battery's...
i was just wondering if you could do a test between the dewalt high torque with a 5ah xr 20volt and the 9ah 20v/60v flex volt batteries. i know the flex volt wakes them up a bit but i was curious to see how much
Coming back to watch this now makes that new mid torque from Dewalt look even more impressive
I came across a video quite recently where a slimmer, lighter socket was not able to loosen a nut where as a thicker, heavier one did manage.
Lots of comments speculating left and right without much theory to support it.
Perhaps you could take a shot at it?
Will you test the Bosch high torque that’s coming out? Model GDS18V-740N
1,180 breakway
I've had the dcf899 since 2015 when it was brand new. It's pretty good, however the vibration takes its toll on the batteries. The mode select switch gave out once, and if you don't take the head off and grease it once in a while the bushing up front will wear out badly. Might choose another brand to replace it.
That's because when it's brand new Dewalt cheaps out on grease and literally sticks a SMALL DAB in there. I heard about this before I bought mine so I took it apart and added a few GOBS
@@marcoeis6598 a large amount is unnecessary and actually can hinder performance by cushioning the blows from the hammer mechanism. Just a little bit of quality grease added occasionally will do it.
You'd win my heart if you could manage to run a Milwaukee 1" D-Handle impact wrench vs a few other pneumatic or battery 1" guns. It boasts a 2000ft-lbs breakaway torque, and I want to see how it really shows up
Can you test out the kobalt 1/2 XTR? I bought the older version of it for 100 dollars and I love it. The battery life is awesome. I let my friends shop and his mechanics use it for about 2 weeks and they absolutely love it.
Ended up with the dcf899 and it’s great for what I need to do which is occasionally working on my car
Would love to see the makita xwt08z 1/2 on here in the future. Love this channel!
I know that Dewalt didn't provide a better battery in the kits for the 899 (providing 18650 instead of 21700) but what's the harm with providing another test with a 21700? When you tested the Ridgid you went back later and used an octane battery (21700) and I believe the M18 XC5.0 used in the video is also a 21700, which kudos to Milwaukee, did include in their kit.
The XC5.0 is a bare bones 18650 pack, similar to the DeWalt 5ah pack. We test what comes in the kits, because that's what the brands are trying to sell you on with the numbers that are printed on the box. The XR 5ah appears to us to be a great pack. The non octane from Ridgid was quite trash.
@@TorqueTestChannel Thanks! That all makes sense. Didn't realize the XC was 18650 because its a beast of a battery.
Forgot to mention: I have a DCF902 with 2ah and 5ah batteries that you can test if you want.
How about the Bosch - IWHT180B Bosch 18V High Torque Impact Wrench? Bare tool $265 . There is also the new Bosch GDS18V-740N from the Profactor line. Another one to look at is how dose DeWalt and brother company MAC tools compare for impacts. Are they just re-shelled DeWalt or different?
I kinda wanna see a snap on air impact. Or even the electric. My coworker says his air snapon is 100% the way to go. I like my m18 hightorque. Cause usually it either breaks the bolt or removes it lol
I own a snap on mg725(stronger then there pt850) that is brand new, and an m18 fuel high torque. The m18 fuel is the superior impact both in strength and ease of use
@@votivegore really?
Your coworker will never admit his snap on tool is inferior to Milwaukee. Not at the premium price he had to pay 🤣
As a dewalt flexvolt user, I'd like to at least see a quick review of the dewalt with a 6ah flexvolt battery compared to an xr 4 or 5. Would be interesting, for me at least. 👍
Not much different busy lent me his DeWalt and I threw my flexvolts on it when his XR battery ran outta juice.
Not holding my breath for the (most likely) upcoming 60v 1/2 DeWalt since their new 60v recipe saw got it's ass handed to it by the old milwuakee super saw
please test the dewalt mid size dcf894
Why we see no Bosch tools tests on this channel ?!?!?!?!?!?!?!?
I would like to see how much torque you lose as the battery depletes. Milwaukee tools noticeably turn down at 2 bars. My hope is it maintains max torque until 3 bars.
Would love to see the MacTools Bruiser it’s the only 1/2inch gun I’ve owned
Would like to see what lvl 1 and 2 torque graphs look like especially with the DCF899. Doesn't look like it reaches their max fastening torque specs on Dewalt's site. Curious how close they come to the advertised ratings on 1 and 2 as well. Thanks
you should also test the rigid high torque with the 9ah 1 500ft-lbs of breakaway
Is it a high-torque? Sounds more mid-torque level compared to the ones in this video.
@@samuel5916 no mid torque is the 620ft-lbs I don't think I've ever seen a mid torque with 1 500ft-lbs of brake away torque
@@samuel5916 It;s 1,500 ft-lbs. It will be making an appearance on the channel, yes!
@@mattyg525 having the space between your “1” and “500” makes it seem like you were saying 500 and not 1500.
@@plaid11 oh ok my bad
Can you guys do tests on 1” impact guns? I’d be happy to send you our ingersoll rand 2850max air gun that has 5’ of 3/4” hose whip thing is a beast. Be interesting to test against the Milwaukee 1”
Our 80 gallon IR compressor a 1" cast iron line has a hard time keeping p with 3/4"!
Get the new 900 dewalt guy did a test took off bolts torqued to 1800 lb ft.
Will we be seeing the Makita 40V high torque as well?
Requires a new battery platform for us, so as a kit is near $600. When we can afford it, it will definitely be considered!
@@TorqueTestChannel Given the quality content, I am sure Makita would be open to providing you with some tools to test! Can't hurt to ask!
@@NameNaameNameeNaamee Unfortunately we dont accept tools from companies, we've had several offers (not from Makita however)
Drilling with Milwau: I drained the battery and with only 5 minutes of re-charge I could drill and make more holes in a wall, just for a "quick job" it works, you can work for a few minutes.
I own the Milwaukee but in the 3/4 drive would love to the the difference between the 1/2inch.
I'm a diesel mechanic, use it on wheel nuts almost everyday,
Nice job. Thanks for testing the dcf899. I still like it more than the Milwaukee.
I like dewalt ergonomics more than Milwaukee, and the styling is more tasteful I think.
@@Isaiah-ft5nx they have a much better design and even more power in a lot of cases
Can you compare to the new makita 40v high torque
We're hoping some one is kind enough to lend us one for a day, we'd need a kit and at $600 it's a spendy one!
@@TorqueTestChannel
Didn't you just drop a bunch of $$$$ on an IR?
I would like to know how the m12 9.0 waitleys do on the stubby.
For 37 doll hairs I capacity tested one and got 8.0 out of it. Granted that was a 2 amp discharge.
I have bought some other knock off batteries and they weren’t worth throwing at your enemies. It’s really hit and miss when it comes to knockoffs. The waitleys 9.0 has always done good. Two batteries both testing at 8.0 actual capacity
Can you test a snap on 1/2in magnesium air impact? I'm a diesel tech student and I have a student discount for both matco and snap on but I'm not sure which one I should get.
For the money as a student save your money for a cheaper unit.
I'm a dewalt guy, but I think I would go with the milwaukee for an impact for working on the car. I'm in canada, so there is rust, but I would buy that and 2 batteries for it if it meant it would perform better and get those Rusty stuck nuts loose. Thoughts?
I enjoy these viseos but I would like to see you guys test Ingersoll Rand 20V high-torque states 1,500ft-lbs breakaway 1,000ft-lbs max
We're saving up!
How about the makita 18v 1/2 high torque impact wrench or the 40v 1/2 high torque impact wrench
the dewalt (im not trashing this specific brand) gave me after a 30s of full power on a bolt which wouldn't came a wrist sprain injury. now i cant work on anything related to automobile cause as you may know you need your full mobility to work. im healing quick but it's pain to wait 2-3 week plus exercices... so heres my question : didnt you feel anything when operating such tool ? may you hold it a certain way ? thanks for your sharing.
I hope this tool's successor keeps being made in the USA. I like that tidbit, I can't speak for everybody but I try to prioritize buying domestically-made products
What was the Milwaukee half-inch cordless impact model number to stay away from? What was the best model number to get?
how about the makita 1/2 high torque?
Second this suggestion
I have the Makita XWT08 high impact gun and I would be willing to lend it to you for a test. With a 2 MaH battery its plenty strong for working on my cars. I liked your video for the mid torque Makita and I think that would have worked for me too but the price is almost the same for the high torque.
I got the same dewalt but with a hog ring. Wonder if it makes a difference
Please make videos about the high torque impacts from Ridgid and Ingersoll Rand. Both claim 1500 ft lbs
Now that’s the detent pin anvil. Doesn’t the hog ring anvil transfer more torque?
Yes! I been waiting for this!
Me too... lol
Wonder how the DEWAlt does with the flex volt battery
I'd like to see if the extended anvil impacts have the same torque loss as using an extension of the same length, or if it's worth keeping another impact around for those tasks.
Ah hell, who am I fooling. Any excuse to buy more tools, right?
Great presentation. No matter what, my toolbox is filled with M-18 with the 9.0 and 12.0 amp batteries.
It would be very practical if you had a website for us to search our tools and check out the specs with affiliate links to buy the tools from your website
How come you guys don’t put the IR 231 on your chart? Would be nice to see that comparison.