Most Surprising MythBusters Result
HTML-код
- Опубликовано: 24 дек 2020
- This question for Adam is a POPULAR one, and it comes from Tested member Mike R: "What was the biggest 'I did not see that result coming' moment through the years?" Thanks for your support and question, Mike R! Join this channel to support Tested and get access to perks, like asking Adam a question:
/ @tested
Tested Ts, stickers, mugs and more: teespring.com/stores/adam-sav...
Subscribe for more videos (and click the bell for notifications): ruclips.net/user/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Gunther Kirsch guntherkirsch.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Set design by Danica Johnson / saysdanica
Set build by Asa Hillis www.asahillis.com
Thanks for watching!
#AdamSavage #MythBusters 
Наука
Join this channel to support Tested and get access to perks, like asking Adam a question:
ruclips.net/channel/UCiDJtJKMICpb9B1qf7qjEOAjoin
Mythbusters has always been my favorite
"We wasted their time!" :D
At 2:18 “undimpled ball goes farther”
????
Z
Now that simulated shark skin texture swimwear has shown to give swimmers an advantage, so much so it's banned from competitive swimming. Would a car with a similar surface finish benefit from very small dimples like the shark skin, or would the dimples need to be larger? I don't know how different the fluid dynamics of air are to water.
I love how the question was from Mike R. ("my car")
Nice catch 😁👍🏼
Mike Rowe is who I like to think asked this question
@@yahmahar6 Mike Rover?
Do you like..... Mike R?
OMG
My most surprising result when watching the show was Are Elephants Afraid of Mice. Jamie and Adam go all the way to Africa and get a real elephant and hide a mouse under a dung trap on a string and they pull it and the elephant stops in its tracks gives it a WIDE BERTH. And Adam and Jamie are just sitting there holding the string chuckling and bright red like "I can't believe there's some ACTUAL truth to this!"
I think someone actually explained the reason behind it, not sure if in mythbusters or somewhere else - mice make barrows, and they can start making one in an elephant nail, and if that little thing is determined enough, the elephant really has little to no purposeful defense against it, and if that mouse is successful, the nail can get infected, hence why elephants are afraid of mice.
@@Bastacat On another episode a little kid questioned why they used white lab mice, because the elephant may never have seen one before in the wild. Adam admitted she had a good point, and that it might call their result into question.
Bull in a china shop was also pretty surprising...who knew they could be so dainty??
I remember that one. It looked like that trap thing they turned over was more startling than the mouse itself. Edit; yeah they tested it without mouse and no rection
@@Bastacat the version I heard was that elephants have poor eyesight, so anything small and skittery moving around them they think might be a poisonous snake, and so they avoid it.
I also have dimples on my car. I got a discount on it because of this. They called it "major body damage" but people rarely notice it unless I point it out. The theory is the previous owner left it out in a hail storm but it could have been someone with a rubber hammer who had seen this episode and thought they could increase their gas mileage.
I had an old '02 Subey WRX with the factory original engine hood... which they made out of Aluminum. That baby was golf ball textured alright- previous owner did exactly what you suggested and left it out in a hail storm. I always liked to think that it added to the fuel efficiency specifically because of this Mythbusters episode.
That happened to my father's car - we call them Mazda Speed Dimples
My buddy had insurance completely replace his 1 year old car with a new car cus it was covered with dimples after a hail storm.
So they definitely will write a car off for that and that's much more likely then someone rubber malleting it. Kinda funny you ended up with one though lol
If you live in QLD Australia its hail damage! Cars here get beat up every year if you ignore the ominous green thunderstorms and dont get the car under cover!
Those are speed holes, Homer. They make the car go faster.
The result that shocked me was the one where they tested if a tree or a plant could be stressed if you yelled at it or threatened it. The results were pretty amazing.
the plants listening to heavy metal being either the healthiest or second-healthiest following the ones listening to classical music was my favorite part.
I love all the comments saying this without saying the results …
@@jesuschristiskingandsavior461go watch the episode lmao we’re not here to recap it
Crowley has known plants grow better when abused appropriately for decades.
@@jesuschristiskingandsavior461they found that the plants did not get stressed. Pretty amazing stuff!
I don't have hail damage that I can't afford to fix, it's a fuel saving system.
I was just going to type about hail damage - that it's actually desirable and the dealer discounts it for us :)
@@PerfectlyNormalBeast could you explain I don’t understand ?
You can buy hail damaged cars for less money. So if the dimples save gas, then even more savings
I kind of doubt fuel savings would be noticeable. But who knows, maybe someone has studied it
@@PerfectlyNormalBeast it’s noticeable if done properly if not it results in next to nothing
I expected the letter from the auto manufacturer engineers to say: "Ya, we know, but the marketing guys said dimpled cars are hideous and impossible to keep clean."
that was probably the First Draft that didnt leave PR.
But in reality, the actual reason that They wouldnt do it is the manufacturing difficulty. Remember that a Golf Ball is engineered without any preferential aerodynamic flow. They are dimpled so that they have lower effective drag but that that drag is not servicing its control.
To contrast, a car that is actually dimpled for performance would not be regulated to have uniform dimpling like a golfballs 300-500. it would only have about 500 dimples, only along aerodynamic shear points and facing into the primary direction of travel.
@@F14thunderhawk That's the reason why often times aerodynamic control devices are things that are easily made out of plastic or aluminum. Look at the headlights of your average current production car for example, and see how much they stick out compared to cars from the past. Or the very sharp creases in the hood that start towards the middle and end near the edges of the windshield. Or the little nubs or fins underneath the side mirrors. Or the fact that many sedans have taken on almost a fastback profile. That's for aerodynamics. In front of the windshield, around the wheel openings, and the top of the trunk are some of the highest sources of drag on a car because they're trapping pockets of low pressure air and redirecting air around them. The dimples on a golf ball do the same thing. But a golf ball's areas of low pressure are unidirectional and form low pressure pockets across the entire surface of the golf ball. On a car the low pressure areas are a problem because the drag they create above or around them are the opposite of the car's direction of travel and not uniform across the entire surface of the car. Ironically this makes many of those "suppository" cars Adam hates so much some of the most aerodynamically efficient. Especially the much maligned third generation Ford Taurus station wagon, which had a drag co-efficient of 0.29, which is just as good the current Prius which spent millions of dollars to be designed to be slippery.
Maybe another reason they got a different result, is that newer cars have been optimized for wind drag, so the car they used had those optimizations "ruined".
So basically the dimples did improve the fuel effiency by 14% but at the same time make the aerodynamics of the newer car, 14% worse, negating the improvement from the dimples.
@@JohnDoe-bd5sz I love the show, but the guys are not scientists, and occasionally reach a conclusion that is valid for their experiment, but not for the general case. I think that is what happened here. They proved that if you are covering your car with 2" of clay, best to cut golf ball like divots.
I can only imagine the nightmare of having a dimpled car during the winter or having it rain.... or rain then freeze in the dimples, defeating the entire purpose of it. lol
I watched this episode with my brother when we were kids. at the time we were in scouts, and took part in a competition where made miniature wooden cars and raced them against each other down a slope. my brother was inspired by this episode and made a car with dimples. not sure how much this helped since we didn't race it against an exact control, but the car did end up winning the competition.
My dad used to own his own race track for pinewood derby being an old Eagle Scout. Shame he gave it away years ago to a troupe that wanted one for in troupe competitions
If you had given me three guesses, I would’ve guessed:
1. The episode where they polished poop
2. The strength of interlocking pages of a phone book
3. The toilet paper prison escape rope (though that was a Tori, Adam, and Grant B story)
Wait they polished poop?!
Polished poop episode had my rolling balls of mud tryinh to make them shiny haha
The phone book one will always be the craziest one to me.
As a kid, I remember bringing two (small) phonebooks on the school bus during a trip. We probably wove and unwove those phonebooks a half dozen times passing them around amassed that they couldn't be pulled apart.
After seeing this episode as a kid, I tried to make a dimpled pine wood derby car for Cub Scouts using a drill press.
But did it work?
My friend filled his car with lead, so they had to drill dozens of holes in the bottom until it was light enough to race! 😂 He was pulling his hair the entire time.
Yeah what Joshua said "did it work" we gotta know
@@aaronkortas8336 I guess if anything it got lighter lol.
How did your car do in it's race?
I think the most surprising was when the bull in the China shop actually avoided the China cabinets.
Just seeing a bull avoid the cabinets was impressive.
This was mine too!
The bull was like a giant house cat, the way cats walk around on a table without knocking stuff over.
Ohhh i remember that
Pigs in the corvette
@@RCAvhstape oh no you'd think that happens, but who wrong can you be. 😂😂
I love how excited he gets about these stories, even after many years! His curiosity and love of science and engineering is palpable
?8 y
It's crazy that Buggattii actually did this on their newest track car
Adam, to clarify: It was an early 2000's Ford Taurus you guys used, and you ran the test with just the car at speeds to test fuel economy, then ran it again with it covered it clay (and no dimples) to verify the results with the extra weight, followed by the third test with the dimples and their cut outs in a crate in the back seat. I also seem to recall that "holy hell!" moment between you and Jamie being genuinely hysterical, and Jamie uttering an iconic one liner at the results: "I feel like eating my beret!" That was a GREAT episode! Thank you for sharing!
The original myth was that a dirty car has better fuel economy due to the dirt imparting a "golf ball-like effect". When that proved to be bogus, Adam & Jamie then proceeded to do the actual golf ball dimples on a car to see what would happen.
And hilarity ensued
I would submit that the air temperature, wind speed, humidity, etc. differences between the first and second tests were more important factors than the dimples. You could repeat the test with a modern electric car which would give you the Kw readout to maintain a constant speed or better yet, use a wind tunnel like aircraft and auto manufacturers use. If dimples were able to reduce wind drag by 15% then all aircraft made would have dimples, which they don't. I think the golf ball dimples are there for the same reason the lace ridges are on baseballs, it allows you to make the ball curve and to put spin on the ball thereby enhancing ability to control flight of the ball.
Dude... You're gonna try to tell the guy that did the show, THE GUY THAT DID THE SHOW, what he used and did? He did the show....
@@mikeznel6048 ... he probably went back and watched the episode to verify.
@@mikeznel6048 He had issues remembering all the details (which is reasonable considering how long ago and just how much stuff they did that hit the TV alone), so he clarified the details for Adam who couldn't in his singular take. Adam appreciates such things as well, based on previous reactions to such reminders live at conventions where he's having issues while a fan remembers very well (usually the one asking anyways).
I could listen to Adam talk about these Mythbusters stories for hours.
I envy his nieces, nephews, and grandchildren if he has any. They must hear the coolest stories.
Same...and I have been.
I wonder if he gets tired of getting asked about Mythbusters....
When he tells a story I try to remember the epsiode that he is talking about.
Same
Thank you for producing these RUclipss. My younger brother was a big fan of Mythbusters and when I visited him I often watched them with him. It was good times. He’s gone now (RIP, Bradley) but I know he would enjoy watching these RUclipss. We often talked about the very questions you answer.
Thanks for sharing rip Bradley
@@wolf3755 thank you
Aw man i just now found out that Adam has his own RUclips page after years of watching myth busters as a kid. That’s is the best. He’s still the same guy he was all thoes years ago and is following his passion. Such an down to earth and creative mind.
I remember that episode. Jamie even said " I feel like eating my beret. "
Ha! I actually didn't remember that episode exactly, but i DO remember Jamie saying that!
i love how, even though its been several years since the show ended, Adam still has so much passion while answering questions about Mythbusters.
Inspired by your experiment, I designed and 3d printed panels with dents for my car. My theory was that you don't need to cover whole car, but just end to reduce air drag effect (btw this is a combi). After 4 years, the average fuel consumption drop is around 7%. Thank you for saving my money:)
Did you save enough to offset the cost of plastic?
The aircraft designers at Supermarines in Britain were worried all those complex and expensive flush-headed rivets were going to make their new Spitfire too expensive.
- so they took the first smooth, flush-head riveted Spitfire and glued split peas (half-peas) all over each and every rivet. They flew the plane, took off a few of the front-most peas, flew it again, took off some more, etc.
When taking off peas did not improve performance, they went into production with flush rivets where it helped, and simple round-headed rivets where it didn't matter.
Spitfire = success, work involved about ten man-days, production not slowed at all.
@@garythecyclingnerd6219 7% on his gas bill is WAY more than what a few plastic 3d printed panels would cost. Although its important to note that, like Adam Savage said, that is within the margin of "error"/could be a placebo from him wanting it to work.
Why don't you get an electric car if you want to save every tiny bit you can?
@@rhamlet5290 What do you mean by "get"? Someone will give it to me for free?
The golf ball car episode was the first one I watched and it got me utterly hooked on Mythbusters. The way you followed the myth all the way to the extreme of making a golf ball car - no one else would have done that.
My favorite was when you showed that an adult bull African elephant really was scared of a tiny little mouse. That blew my mind.
@Man ruclips.net/video/4uxix5An0lk/видео.html
Specifically, a girl asked them why they used a white mouse instead of a brown/gray one, since the colour white isn't common in "nature found" mouses.
How about a bull in a china shop is careful
It’s kinda the same thing as humans being afraid of insects.
It was a white mouse unnatural thing for the elefant
Yep, I was thinking that would be the myth that he would mention!
"We wasted their time!" Oh Adam, you are ever so spontaneous and lovely! Please never change! 😄
Seriously... Uncle Adam is the Uncle we all need and are so thankful to have. Best wishes and happy holidays and new year to all who read this message.
He did not waste their time. They add to the knowledge base of car design. I have to wonder if the test was done others and what did they find?
@@peterkelley6344 even in a failed test, where you even fail to get a valid result, you have learned something.
My biggest disappointment in Mythbusters is insufficient testing of myths that could really help. They basically only looked at "how can we replicate the myth" did it a few times, and called it a day. I understand budgets being what they are, but things like this, or the one about plants and music, could have been done with actual scientific rigor.
For a 14% gain in fuel efficiency, it's worth a try
@@derekpospisil747 I don't think I am disagreeing with you. I think that i wrote that even with a failed result you get data anyway.
Super late to the party, but had to jump in and say that your explanation of how dimples on a golf ball work was one of the best descriptions in layman’s terms of an aerodynamic phenomenon I have seen in a while. Bravo!
But it’s not right…
@@carazy123_🤓
I loved that episode too, and still think about it a lot. I wonder if a rounder vehicle (like a beetle) would be more likely to be aerodynamically enhanced by dimples than a square- bodied vehicle like an SUV?
P.S, I’ve introduced Mythbusters to my kids, who love it!
Beetles don’t actually have very good coefficients of drag. Aerodynamics is super counterintuitive
"suppository sedan" is the term I needed. I had been using "melted potato" for those things.
Agreed. I laughed my ass off when I heard him say that.
We always called them “jelly bean cars”. I had never heard the term for the output end of the process. 😱
As a non-native speaker I had to google "suppository", the awkward pause of opening a new tab, typing in and seeing the results from image search made for a priceless comedic timing. Made my day.
It's a very good descriptor, we all know what he's referring to 😂
Something like a Ford Probe is a good example of one
FACT: As his story progresses, Adam's giddiness grows exponentially.
...and it is quite fun to watch!
I swear.....Adam Savage seems like he has the natural curiosity and love of learning of a 5 year old child. Very wholesome and inspiring man!
I was watching at 2x speed so he was giddy from the get go and even giddier towards the end!
@@ailaG Double the giddiness, Double the fun!
Cringe
@@AkiraSatou ¯\_(ツ)_/¯
He is an awesome storyteller and his energy is infectious :)
I still remember this myth very distinctly because of how mind-blowing it was!
Hey Adam. I remember this episode vividly. Both tests had a clay layer on the vehicle. Dimple car had the shedded clay in a box i think either in the trunk or one of the seats.
As I recall, the removed clay went in a box or boxes in the back seat. Most times K.I.S.S. ruled the day on Mythbusters.
Yep, it went in the back seat.
That's exactly right. I watched this episode with my daughter just last week.
They also ran a control without clay as part of the dirty vs. clean fuel efficiency part of the myth.
What surprised me was that the added weight of the clay didn't affect the fuel efficiency much at all. They explain very briefly in the episode that it's because the car was already at speed when they start measuring consumption. The difference made by the weight of the clay is in the acceleration which is deliberately excluded from their measurements.
That's some very clever reengineering.
I’ll have to watch the episode for more context, but I’m a bit mystified by Adam’s (and the car company’s) response. Could it be a real effect, or just a quirk of the experiment? Why isn’t serious research happening if adding dimples saves 14% fuel?
@@youngturksfan the auto industry has to decide whether the fuel savings will lead people to buy what was an admittedly ugly car. Esthetics play a large part in car purchase decisions. The auto industry at the time and probably today measures official fuel consumption numbers by running a car on a dynamometer in a closed room and this myth is pure aerodynamics. The industry probably tests aero in wind tunnels and relies on math to extrapolate results. Different testing methods will yield different results.
The bull in a China shop was my most surprising one, growing up I've heard that saying so many times, and to see that bull be _so very careful_ surprised the heck outta me!!
also good
?
Having grown up with bulls, I wasn't surprised. But an enraged bull... I've seen them throw 100lb bales about like toys, destroy fencing, break the neck of our personal milk cow and kill my neighbor.
@@stephenharper6638 All that during your time as Prime Minister of Canada?
The cat broke the china, and the bull was setting the record straight.
Golf ball car was my absolute favorite episode of myth busters ever. It stuck with me for years and I would tell people about it any time the show came up in conversation. Thanks for your perspective on it!
I just love Adam's enthusiasm and generosity. It's so mood-lifting.
I think the one that surprised me the most was the one testing whether or not water would protect you from a gun shot. I was blown away when they showed that the more powerful the gun, the less distance it penetrates the water. I mean, the explanation for why makes perfect sense when you think about it, but I hadn't given it that kind of thought before.
"I was blown away." I see what you did there.
if you define powerfull as higher velocity. a shotgun would do better with a slug since the velocity is lower. that's why they use spearguns underwater. get a relatively heavy arrow moving not superfast so it has kinetic energy that doesn't dissipate too quickly.
haha, I literally thought about that a day or two ago in the pool. It's kind of strange how many random factoids from Myth Busters still floats around in my head.
@@ronblack7870 They showed this in John Wick 3. The bullets weren't having an effect but then John got the gun right on the guy and that of course worked.
It's all about the projectile having high linear density (long and not wide) and going slow enough that the impact doesn't damage the projectile. Arrows go through sandbags
"WE WASTED THEIR TIME!"
That's hilarious and totally Mythbusters-Adam Savage like. 🤣🤣😅
Usually I’d just like it if the author just posted excerpts from what they’re referencing, but I absolutely LOVE Adam retell these stories. Just love it.
I remember traveling to Munich Germany many years ago, where I noticed an occasional car with dimpled hoods and trunk lids. Curious, I asked a local who told me there was a terrible hailstorm that caused much damage. Some car owners, however, took this as an opportunity and replaced their broken window glass and continued to drive their cars as unique statements of survivorship. That image will stay with me forever and was re-kindled when I saw your golf ball car episode. Thanks for so many informative - and entertaining - productions.
I firmly believe that all motor vehicles driven in the US should be legally required to use one of two specifications of bumpers (the bigger ones would go on large trucks, small size for everyone else), no paint or other covering allowed, same bumper front and back, and it's bolted to the frame so anyone can replace it with the same size socket wrench. And it's a big heavy ugly steel bare-metal bumper. And when it comes off the factory line, every bumper gets whacked randomly by a hammer so literally every bumper in the US has at least one big ding in it.
No more replacing a whole plastic fairing when you scrape on something or get into a fender-bender. Can you imagine how much money everyone would save? The resources that our civilization could put toward something useful?
Collector Car Guy: ER MA GERD, BUT MAH RIGHTS
Me: Go screw.
@@googiegress7459That big ugly bumper was terrible in terms of aero, now go eat ze bugs and sleep in pods for ze efficiency
So homer Simpson was onto something when he started putting "speed-holes" in his car with a pick axe?
My side garage door opens faster now after my little cousin used it as a bb gun target lol.
Simpsons predicting the future once again.
To be fair, those were more for weight reduction. Lightning cut speed holes baby, Homer was ahead of his time and built a no prep street car years before the 1/8th mile race scene took off.
Homer is actually a genius
@@homerunman9381 IIRC Pontiac made a short run of "Swiss cheese" Catalina's in the early 60's with the goal of making a "factory" drag car. These Catalina's had a series of holes drilled out of the frame and certain parts of the car's bodies at the cost of frame rigidity,thus earning the "Swiss cheese" moniker but the 1/4 miles were remarkably better than a regular Catalina.
I swore he was going to say the elephant afraid of mice myth. They almost busted it before they even tested it.
He used that one last time he told the story of his "most confounding myth"...
That wasn't busted though...
@@dubz5149 exactly! That's why it was so confusing to them haha
Adam, I want you to know that episode aired the same year I got my first car in high school. I have very regularly remembered that it was from you that I learned about mood and it’s effect on fuel economy. I’ve thought about it within the last week when I had a stressful day and noticed a lower average in my truck. There are a number of random things like that which you said on Mythbusters, that are part of my day to day knowledge about life.
I've seen every episode, some of them twice. Jato Car was exciting. The golf ball car blew my mind, because it seemed so obvious when they explained it, and I had never even imagined that result.
I really love how there aren't any cuts or obvious edits to these videos. It feels like you're actually sitting in front of us answering a question we asked you, instead of watching a video. It feels so personal!
The sheer charisma certainly is a nice change of pace from most overly edited quick cut content these days
It's too bad there's ads instead...
Cuts and edits sure, but he also clearly improvs the answer. No script can make something like this feel way more....well, human!😋
@@ericzhang4243 Loving what you do and being *super competent* can make a decent presenter a superstar.
@@capthappy8884 I love human stuff.
I actually just watched that episode again. Some of the things Adam forgot in the intervening years:
1. For the dimpling test, they first covered the car in clay, did the test, then carved the dimples, put the removed clay in the back seat, then ran it again.
2. The NASA Ames research center wind tunnel guy they worked with was (based on the credits at the end of the show) Kurtis Long
3. The original myth that was being tested was that you would get a "golf-ball like" affect by driving your car around dirty. That was busted, driving the car around dirty was less efficient.
cant find the full episode quickly but from the short one it doesnt look they had any consideration for how much weight the clay lost as it dried out between the control test and the final test post carving.
@@zenistfpv certainly not 14% of the car's weight
But did they provide a proper explanation of why dimpling reduces drag on a golf ball?! Because the whole thing is so wrong! A dimpled surface will have more drag than a smooth surface. The savings come from the way the dimples change the effective shape of the object! The dimpled surface causes a high drag energetic turbulent boundary layer that is better adhered to the surface than a low drag low energy laminar (smooth) boundary layer.
The airflow around a ball with no dimples will be roughly the same as a half ball with a flat backside, which has huge drag. The dimples enable the airflow to follow the curve of the ball and make the airflow look more like a wing and thus low drag. (exaggerating, the effect is more subtle.)
The whole experiment depends on the shape of the car!
Did the dimples make the resulting airflow more aerodynamic or not?
Glad that they didn't dump all of the clay in the trunk because that would change the angle of the car (low back end) and create more drag (imagine a car at an exaggerated 45 degree angle.)
Also, what speed did they drive? Fast enough to have significant drag? How did they ensure that acceleration was the same? Really, probably better to have a switchable supply. Accelerate on one tank, then switch to the other measured one for the constant speed lap.
@@brianwest2775
Backseating much? Get out there and run some tests yourself, or shut your yap.
I think the one that surprised me the most was that the "Barrel of Bricks" was deemed plausible.
The company said you're wrong, but did they say why?
Would've been funny if "Sir, you're wrong. It's actually 20%, not 14%."
If it was an SUV, there easily could have been a rear turbulence effect that could dominate the overall drag. Poor engineering in my opinion.
I'm caught between bull in a china shop and elephants are afraid of mice. Though mythbusters had a ton !!! Happy holidays Adam!!!
I was going to say Bull in a China Shop too.....brilliant 👏
But remember what kept you watching was the big booms
Funnily enough, in my native language the saying is "like an elephant in chinaware/porcelain", so the whole episode I was wondering how an elephant would act.
You know, I was the same way. In retrospect I realized I wasn’t giving the animal part of the experiment tho credit it deserved. They aren’t humans, but they are hardly mindless robots. Sure they don’t approach the morality the same way as us, but that doesn’t mean a bull will just walk through something given the choice, nor an elephant just smashing a mouse for no reason
if you put bull elephant to china shop and then release mouse there, what would happen?
"We wasted their time! I love that!" I love and respect this man so much
the great thing is if they collected and shared their data then their time definitely was not wasted.
Dear Adam, it is so great to be able to watch you in your awesome shop all these years after Myth Busters explaining and commenting on the show and physics in general. Thank you!
Your descriptions of the engineering process are so on point based on my experience as an electrical engineer (data acquisition & control and IT technical services). I got to instrument the propulsion package for the Galileo space probe for NASA for long term storage when the Challenger space shuttle failed on launch in 1986. Galileo was scheduled for launch the next year I think, but NASA rightly cancelled all flights during the investigation. The propulsion package was manufactured in Germany and was not built to be stored at room temp at 1G for 5 years: our company, Remote Measurement Systems, got the contract to instrument the package for long term storage. As it turned out the package worked perfectly on launch and so we took pride in getting that probe to Jupiter.
1st rule of engineering: If it works, don't fix it!😊 P.S. Very sad about Grant, stay well sir.
I feel the exact same about longest and shortest days of the year. My least favourite and favourite days of the year.
I was sure you were going to say exploding water heater. That episode still scares the crap out of me that there's a bomb living in my garage just waiting to go off and destroy my house. haha
I love how the water heater launched through the roof of the house like a Polaris missile from a submarine.
It's not "waiting to go off" unless you've intentionally disabled all of the safety release valves. The result of that experiment was "surprising" the same way it would be surprising if your pressure cooker exploded after you welded the port in the lid shut.
But yes, I agree, steam explosions release a truly awesome amount of energy.
Make sure you film it when it goes off.
Well remember you got like 5 layers of failures before that happens.
They couldn't contain their emotions, on that episode..
His gleeful "we wasted their time!" Gave me genuinely hearty laughter.
*But* what *result* did the *car company* get with their *clay model??*
I'm glad he did a double take. Negative results are actually far more informative than positive ones - cf heavy objects fall faster than lighter ones, if the earth were flat the midsummer sun will shine down a well here as well as there etc. The greatest discoveries aren't accompanied by a cray of "eureka" but "Funny, that shouldn't have happened."
My favorite mythbusters episodes are the ones that gave definitive answers to tricky and contentious scientific principles, like: "If two cars collide head on at 50km/hr, is it really equivalent to each hitting a wall at 100km/hr?" or "Can a plane take off if it's on a treadmill moving the opposite direction?"
My least favorite mythbusters episodes are the stupid ones that take idioms literally, like "lead balloon" or "hit the ground running" or "knife to a gunfight".
Adam Savage and Jamie Hynemang were both at the Loveland Colorado event center It was, at the time, the largest crowd, you both had on your tour. I was there it was fabulous to see you in the flesh. I loved how Adam skipped me and said. As he was running, “Let’s get a volunteer from the cheap seats.” Best experience ever! I’d like to know if Adam remembers that day…
"Elephants ARE afraid of mice??" That's what I said during that episode .
It seems less like they're afraid of mice, and more like they're conscientious about them.
I loved how they were totally shocked at the result but had to whisper in that episode. lol
Elephants are REALLY careful about stepping on things because if they slip and fall that leads to serious injury and in the wild, generally means death. It's not so much that it's a mouse, it's that the Elephant doesn't want to slip and fall.
@@danlorett2184 So basically...mice are the banana peels of the elephant world.
I mean... people are afraid of mice and you can kill it with a flick. Maybe we shouldn't be shocked. People are scared of ladybugs and that is comparable to an elephant and a mouse.
I will never get over the fact that when I’m watching him answer questions, a ten minute video seems like it just takes a couple of minutes. Blows my mind.
You know, my recent experience after buying a bike shows how much the wind resistance is a factor due to how I always have to push against air resistance even when there's wind in the same direction that I'm going.
They make cars that have shields behind them, and riders can ride 60mph easy up close to them when blocking the wind.
I can remember in High School when we discussed aerodynamics in science my teacher actually brought up this episode and showed it to us in class. Easily one of my favorite myths tested from the show.
Christmas joke of the day:
Wife: I regret getting you that blender for Christmas.
Me: *sipping toast* "Why?"
This is absolutely the dumb type of joke that I love.
What a crumby gift...
yah gota love Dad jokes
@@johnmccallum8512 How do you know when a joke is a "dad joke"?
When it's apparent.
@@shootthemoon6072 Unfortunately, you can only tell that it's apparent after the delivery
I'm actually so happy that some company went through with their own tests. It implies they're actually trying to improve their cars and influence the world in a positive manner
Oh no no no, heheh. It wouldn't be to influence the world in a positive manner. It would be so that they could make more money.
The individual engineers might care about making the world better, but using company resources to do a test like that would only be approved by the higher-ups in pursuit of more profit. Any benefit to the world would be purely secondary. (In this case, improving aerodynamics would make it easier for them to hit government-mandated fuel efficiency standards, giving them more leeway in stuff like engine power.)
“Company” “influence the world in a positive manner” HAHAHAHAHAHA nice one, I really hope you don’t genuinely believe this
@@IstasPumaNevada I was about to say that the only thing they are trying to influence is money out of our wallets.
Watching this today for the first time, and question reminds me of one asked of Kari, Grant, and Tory, on a round table show they did years back. And their answer was about a story of a van with several barrels of chemicals left in it over the weekend exploding when the owner hit the unlock button on his keyfob. They cut to video of them setting it up, then standing in the bunker away from it, discussing how of course this isn't going to work, but what steps can we try to work it up to working ...and then Kari hits the fob... and the van explodes.
It’s wonderful to watch a guy who really knows what he is doing and loves his work!
I still remember Jamie saying after Adam announced the results of the dimpled car test “I’m gonna eat my beret.”
"I feel like eating my beret..."
-James Franklin Hyneman
"...but I'm not gonna."
I remember this quote and I haven't even watched this video 😂
Fact. confirmed.
Whats your profile pic, it looks cool 😎
@@AmmeMgee it's a picture of Ulrik the Slayer, Wolf Priest of the Vlke Fenryka. It's from Warhammer 40k.
I like that even though only patrons get to ask the questions, you answer them so we can all find out.
Now I want to know the opposite. What was the biggest surprise when a myth was busted?
@Bob really? it's very easy to do the math and see it's possible to get enough lift so it was proven before it was even tested. the whole deal with lead balloon was just the ENGINEERING. lead balloon was possible from the very start, it was all up to whether or not they could engineer it to last long enough TO get lift
@@milkpigeon Yeah I was never surprised when that worked. Anyone who knows the surface area-volume relationship of a 3d shape would know it works.
It’s just a matter of making a big enough balloon to maximize volume.
My favorite surprise was the sheet fooling the motion detector!
bedsheet beats ultrasonic, glass pane beats IR, yeah - that was a cool one with the build team
@@theodurbin8672 I think it was the other way around, wasn't it?
EDIT: NVM, I was misremembering
@@Nico_M. Okay, seems plausible to me. I must have just misremembered.
-I guess if you used a treated window pane it might be opaque/reflective to IR, but most glass is transparent to IR (you can feel the heat radiating from an incandescent bulb, for example).-
EDIT: This is dead wrong, glass is opaque to IR.
@@Nico_M. watched it back again and now I hear "pane of", even though I watched that section a few times before and heard "painted" each time.
Weird.
@@tissuepaper9962Are you sure that isn't because the outside of the bulb is hot, therefore radiating heat itself?
I remember the episode, from memory, you first covered the car in smooth clay and ran the control, then you used a tool to carve out the dimples, collected all of the clay carved out, and placed it in the car, then ran the test
The "oily" air layer around the golf ball is actually caused by a turbulent boundary layer of air created by the dimples. The air is "tripped" into becoming turbulent by the dimples, which therefore increases the Reynolds number of the flow around the ball, which means it has more energy than a low Reynolds number, "Laminar" boundary layer would. This gives the air the ability to hug tightly to the ball for longer, creating a smaller "wake" behind the ball, resulting in less pressure drag. Sincerely - A mechanical engineering graduate
Having work at AT&T Research a decade ago, I can guarantee that the engineers doing actual engineering tests on dimpling auto bodies was the most fun they had in years. And all the engineers that let themselves become managers were likely almost giddy about it. At the Shannon Laboratory, the researchers designed and built themselves a unit that recorded every channel possible to disk (with a reasonable numbers of spare recorder units to handle other units wedging), coding the control software all by themselves, and limited the project to salaried PhDs on their off hours (Why let the coders have the fun? Much like tournaments became limited to nobility whose grandparents were all noble, after jousting and melee had no use in war.). Seeing the C-Level managers giggling on the Making Of video was disconcerting, to say the least.
Why don't we have dimple cars and other vehicles then?
I think Dimple golf balls have been invented over a century ago
@@christiandauz3742 hard to clean and looks horrible
@@Nervadane also people don't care about efficiency especially in USA where the most popular "cars" weigh 2-3 tons and are shaped like brick shit houses and have ridiculously huge crude engines.
@@noelchignell1048 do you even live in the US? It really doesn't sound like you do. The cars and trucks are getting lighter, more aerodynamic and most manufacturers are downsizing the engines and making them more fuel efficient. Pretty much only special models have the big stupid hp engines now. Even the Ford GT dropped down to a 6 cylinder and became way more fuel efficient. The trucks are starting to come more with twin/bi turbo 6 cylinders instead of 8 cylinders. I'm not sure where you're getting your facts from, but you might want to change your resources.
@@89ludeawakening1
The Top 3 best selling vehicles in the USA in 2020 (according to Car and Driver ) are :
#1 Ford F series Pick Up
#2 Chevy Silverado Pick Up
#3 Dodge Ram Pick Up
The EPA says the 2020 F series gets between 17 and 22 mpg depending on the engine
#1 best selling vehicle in the world is the Toyota Corolla
The EPA says the 2020 Corolla gets between 32 and 35 mpg depending on the engine and the Hybrid version gets 52 mpg
I live in New Zealand and I drive a 2004 Corolla because I don't like wasting money
I personally think the episode where buster survived a very long fall, using only an airplanes emergency escape slide was the most surprising result. He just gently floated down to earth with the slide rocking back and forth.
When they did the pick-up truck with rear door up or down, they discovered (in small scale in a water-tunnel) that the 'bubble' of recirculating air in a pick-up's bed was streamlining the airflow quite well, and that lowering the rear door burst that bubble, I was immediately reminded of the Klein-Fogel wing, which was popular for a while in RC plane circles, where a shallow slot in the wing running span-wise about 1/3rd of the chord back from the leading edge made slow-moving wings more efficient.
Your love of what you do never gets old. Best channel on RUclips without a doubt!
Thanks for this amazing answer to my question 🙂 Merry Christmas!
It was a great one! Thanks for your support!
This is why the Death Star has that detent in it - better mileage.
* parsec-age
Good try, but... No. Not at all, actually.
Engineering aerodynamics into the Death Star would have been (as Adam put it) "a total waste of their time" as it was located in the vacuum of outter space, where, there is no air, which would be needed to cause friction from it's movement through said medium in order to factor in aerodynamics as a means to improve upon it's rate of movement as it travelled through a gasious medium as such.
But, Thanks for playing!
@@MoreEffinCowbell As if space is devoid of anything. At sufficient speeds, aerodynamics matter... even in space. Now, this doesn't cover fantastical devices like warp drives, so as far as we can do in our own universe, aerodynamics would matter when going very fast in space.
@@andrewhawkins6754 Touche.
Though, I'm not sure I agree. I'd be very interested to hear, if you'd care to elaborate with further explanation on this theory of how aerodynamics ("the study of the properties of moving air and the interaction between the air and solid bodies moving through it") would come into play with the movement of an object (at any speed), without the presents of air surrounding it in a contained pressurized environment (atmosphere). And please, show your work.
@@MoreEffinCowbell I'll note that at the legal line for space (100km), the density of space is 3.2E-3 Pa. In comparison, the density of the atmosphere at sea level is around 1.2E+1 Pa. This means that you'll have to push the same amount of mass out of the way if you travel 1 meter at sea level, or 3750 meters at the Karman Line. The vacuum of space isn't perfect. It's a pretty good vacuum, but there is a very small amount of gas there.
It is true that aerodynamics doesn't apply to solid objects passing through a volume without the presence of air. However, the vacuum of outer space does not meet the criteria of "without the presence of air".
Good one. It occurs to me that this idea could be applied to aircraft. NOT the wings and control surfaces, where proper airflow is absolutely essential but, say, to the aircraft's fuselage (body). That's a lot of surface area on big aircraft, and therefore a whole lot of drag that could perhaps be dealt with. Just wondering.
I am so surprised that you referred to the sedans of the 90’s as “suppositories!” I’ve been calling them that for decades and I’ve never heard another person use the same word until now. Very cool…
Adam, I've been watching you since the beginning of Mythbusters. You've inspired the way I approach problems and how I live my life! Keep being amazing and Happy Christmas!
Scientific method is a hell of a thing.
Adam, thank you for all that you have done this year in lifting our spirits in these difficult times, I sincerely and truly mean that. You have brought back the fantastic memories of you and the MB team, made the most wonderful creations in your cave, and recalled the countless times your adventures in this industry have made the man you are today. I, for one, cannot thank you enough. Happy Holidays to you and yours. Much love, peace and a better, more prosperous new year to you and your family, to all your colleagues in this industry past and present, to all your viewers and supporters. Have a safe and pleasant Christmas.
All my best for 2021! Midge from Scotland, UK.
I remember the golf ball car, but apart from Citröen with some "padding" on the doors, I still haven't seen one on the road.
Ferrari’s formula 1 team tried this during one of their cars develop, and found no reduction in drag. The key difference that adam doesn’t mention is that the effect works on a golf ball because it is spinning at high RPM’s.
The aero on an F1 is already so different than your average sedan, I'm not sure that really would correlate.
This is my FAVORITE new channel! Why? You ask. Absolutely no title sequence, no stupid theme song, no credits. Straight to the business of passing info. Thanks Adam for saving my fast forward button...🤣😂
After you did the run with the non-dimpled clay-covered car, you carved the dimples out with wire loops and put the removed clay inside the car to keep the weight.
minus the water weight lost while carving.....
Hi Adam. Rewatching this video because I love it so much and the algorithm said so.
I also love you got corporate to do something Yeah!
Finally, I think another possibility about your discrepancy between non dimpled and dimpled could be was the car “warmed up” before taking the measurements in both cases.
Due to your valid and precise testing, the need for the engine transmission differentials etc to be warmed up and in their “comfort zone” may be the single most contributing factor for the discrepancy rather than dimples or weight distribution. If the first test run (dimples or not) was just a warm up lap for the next test run then the second run should be more fuel efficient and also in line with the corporate findings
Thanks Love the show You Jamie Grant and Everyone!
Up to that episode I had wondered if a dimpled car would work but I did not have the money to waste pounding a bunch of dimples into my Mazda to test it out! One thing my father did was tied a wooden house door down flat to the top of our mini van when we went on trips. One time when we went to Salt Lake City from Portland, Ore we filled up only one and a half times.
Short days in SFO?
In Sweden, where I live, the sun rises at 9am and sets at 3:30PM today.
I laughed too. I live in Northern Alberta.
i mean, it's all relative
Yeah, and a bit more up north, you’d be checking the sunrise times from a calendar, not from your watch.
But epic long summer days!
At least you don't live in Kiruna!
I have always understood the dimples on a golf ball help keep the laminar flow attached to the ball further around the curve of the ball which reduces the pressure wave drag. So the overall shape of the vehicle would be important. They wouldn't be helpful on a square backed vehicle like a truck, but might on an aerodynamic vehicle like a sedan.
thats what i was thinking too. like if you dimple a cube and throw it in the water its not gonna have much of an effect but if you dimple a torpedo shape and srop that, it may work. now im wondering can you dimple bullets
@@kirill2525 that would be a great question for Taofledermaus
@@limprooster3253 id like something with more usefull data then how it flyes into a cd drive
@@kirill2525 Yeah the hard drives are kinda useless targets. They also tend to have their chronograph so close to the muzzle that it sees the wad and the projectile both and gives stupid numbers. But it's mildly informative sometimes
I heard that after a certain speed the extra boundary layer you gain from the dimples gets stripped away by the air rushing past at the high speed, and the difference between dimpled and non dimpled almost goes away.
“we wasted their time! :D”
i love adam so much.
I remember that episode. One of my favorites.
God, imagine being a college student and the Mythbusters ask you to work on a project for them, that'd be AMAZING.
God, a college student?
I remember that episode very clearly! One of my favorites.
Thanks for the entertainment over the years, Adam. Merry Christmas to you and all the other lovelies in the RUclips section!
As a mechanic for 30+ years, I would take your test over the manufactures test. Theirs was a simulated environment while yours was real world. We've had plenty of issues with items that worked well in their simulated environment but failed in the real world.
There are instances of car companies using the knowledge in small ways:
1) The Porsche Cayman GT4 has a dimpled section under the front bumper to help with downforce (RUclips channel Engineering Explained has a video)
2) The Bugatti Bolide has a dimpled air intake.
"Suppository Sedan", totally stealing that one, lol.
I was almost a little annoyed that he thought he had to explain it. It's such a perfect description that I understood what he meant right away.
Well, there was literally a car called The Probe...... his description isn’t far off the mark of that time period.
@@diamondsmasher Ah yes, the Ford Probe. My dad loved them, and conveniently decided to overlook that the parking brakes had a chronic sticking problem. Not just his Probe, apparently this is an issue ALL Probes have, because the factory-original return springs aren't strong enough to do the job once the brake calipers are anything but pristine.
His solution was to override the neutral safety switch and park the car in 1st gear, and never facing downhill. Could never convince him to just... get a better car.
I miss yalls show. It was fascinating, entertaining, and educational. I understand all good things have to come to an end, i just wanted to let yall know it was a good thing. Yall were awesome. I miss the integrity and determination yall went through to sort out all kinds of mysteries. The world today could use more of what Yall contributed. Simple, trustworthy, logical facts, backed up by research and data, and explained in an understandable format across the board in everything yall did. You should all hold your heads high.
"Suppository sedan" had me LMAO
Thank you for this story! After seeing this episode many years ago I had always wondered if any of the auto manufacturers investigated this.
And this one is Season 7, episode 14 "Clean Car vs. Dirty Car" which first aired on October 21st, 2009.
I would think the size of the dimples is a major variable. I'm not sure the dimples need to scale up withe the size of the object. rheir size relative to the size of an air molecule is probably most important (ie the same whether you're a golf ball or sedan). would love to see that tested systematically in a wind tunnel
Correcting the physics:
The dimples create turbulent (“bumpy”) air around the ball rather than laminar (“smooth”). Technically, this should be a BAD thing because turbulent air creates more drag (skin friction). BUT, in the case of the golf ball, laminar (smooth) air detaches (doesn’t follow) the curve of the ball all the way, leaving a big area of low pressure (suction) behind the ball. That means a lot of drag. The turbulent (bumpy) air follows the curve more and reduces that low pressure zone (suction), which reduces the drag a LOT! So it’s adding a little bit of drag to reduce way more :)
This is why I loved to watch Mythbusters and have just started to watch the whole series again. On the one hand the weird myths, their stories and getting to know if there is something to it or if it's just some made up stuff. But on the other hand, that being even the bigger part, I loved to see you guys work on the topics so methodically, still in funny makeshift ways some times and having so much fun doing what you did. The surprise, the fumbling tearing your hair out over problems you came across and the whole team enjoying what they did.