Mini Cordless Hand Saw Restoration | Black & Decker CHS6000-JP
HTML-код
- Опубликовано: 12 сен 2024
- Ideal for cutting in tight areas, the Black & Decker CHS6000 6-volt Handisaw cordless powered hand saw cuts thin metal, wood (up to 1-inch thick), plastic, and drywall with ease. Its tool-free blade changes and its cordless operation provides quick and convenient cutting. Lightweight and compact for easy access to tight areas, this hand saw is capable of making up to 200 cuts of 1/2-inch oak dowels on a single charge and accepts standard jig saw blades for added convenience. With a stroke length of 1/2-inches, this hand saw is capable of operating at 1,850 SPM. This saw comes with a wood cutting blade, a metal cutting blade, and a wall mountable charger, an ideal accessory to provide continuous charging for grab-and-go convenience.
I found this handy saw from Japan recycle shop. It works only for the first time, after a few months, there is some liquid leak from the device, this liquid is from the dead battery. I replaced the original Nicd battery with a li-ion battery pack. As the result, it works normally.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show
I remember buying a bunch of these mini tools for like $5 a piece at a hardware store…. I still have them and they work great. I use them for RC car building and model making.
Nice, thank you for sharing.
Except for the batteries in it; these saws are one of the best tools black and decker has ever made. The tight spaces they can get in & all the different blades they can fit.
I have one of these. I recently thought about converting it to lithium batteries! Very nice, thanks for the video!
My pleasure, Glad it was helpful!
Like it, you did a perfect restoration.
Браво👍👍👍 мастер...Руки золотые и с правильного места растут..
Смотрю все твои видео,продолжай и дальше так делать...
Привет из России.🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺🇷🇺
Very good restoration 👍👍👍Thank you for sharing. Be safe🇨🇦
Good job mister
Beautiful job friend
Stay connected
Nice upgrade
Thank you!
Great job, thank you brother. You are so talented
Good ii bosssku ✌️✌️✌️👍👍👍😊😊😍😍😍❤️❤️❤️
Nice work
Fanstastic work 👏👌 thanks my friend
This is amazing work great video thanks sir.
Keep on doing Your great work! Thanks for sharing this content.
very good
Thanks
Where did you get the sanding attachment? And if it’s home made you should make a video on how to make one!
nice restoration 🔥 great work. what tool brand do you use the most in your work ? 😁
satisfying result as always, keep up the good works mate
Thanks, will do!
Nice 👍
Thanks ✌
Forget it, no power. Hower your job was done professional as usal
I am surprised that 2s 20amp BMS works. Everyone I have tried has not worked in a small 8.4v drill. Perhaps the saw does not have current spike like a drill.
You make this look to easy well done 😁😁
Good restore👍
Yes, thanks
Seeing you fix this reminds me i picked up my dad's old black and decker battery screwdriver it seems to have a torque problem. Would you know how to fix it ?
Nice work -👍 well done
Best video sirrrrrrr
Thank you!
Комментарий в поддержку канала и ролика, а также труда мастера.
Good job 👍🏼
Thank you!
boa noite ...uma vez eu desmontei uma sanduicheira sobrou umas peças ate hoje não sei de onde era... como você consegue kkkkkk
Great job. Can I send you mine to restore. It doesn't work. I'm thinking the battery is shot. I'd hate to have to throw it out because of bad battery
Excelente herramienta, quedó como nueva ^^
I put a 7.2 lipo in mine but the plastic spiral piece the rollers roll on failed. Every other part inside is very good quaulity except for the plastic spiral. I bought a 2nd one to try again cause I do like this little saw but I want to machine the spiral piece to handle the extra power.
Sorry to hear that, this design for small task.
❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
👌👍
Can you show me where did you find the Parameter stamp of the tools and Printed it out for remake the parameter stamp on the machine
With my previous projects, I remade them with adobe photoshop.
@@gear_show your previous projects was about the Modded the Makita impact driver from 14.4 to 18v
I still didn't know how to remake that parameter stamp in that video looked like it already had on the internet but i can't find any information about that
Gratidão GearShow!
Thank you!
👍👍👍
How much you paid for aparratus
👍💯
The dam thing hardly has any power. What a waste of man hours.
Nice work
Thanks