Building a Budget 400 HP T5 Transmission What's The Secret? 👀
HTML-код
- Опубликовано: 9 июл 2024
- Whats been my receipe for years? When your T5 manual transmission is in pieces, it may not be as bad to fix it as it seems...
#foxbody #mustang #ford #t5transmission #t5 #rebuild #secret #recipe #horsepower #mechanics #fabrication #fixed #howto #diy #builtnotbought #tkx #t56
SUPPORT THE CHANNEL: Click the JOIN Button for MEMBERSHIP!
/ @neomustangs
___________________________________________________________________________________
SMASH LIKE, SUBSCRIBE AND BELL FOR NEW VIDEOS! (REMEMBER TURN ON ALL NOTIFICATIONS ON YOUR PHONE/DESKTOP!)
[CONTACTS]
TEE-SHIRTS!: teespring.com/stores/neomustangs
INSTAGRAM: / neomustangs
TWITTER: / neomustangs
FACEBOOK PAGE: / neomustangs
EMAIL: NEOMUSTANGS@HOTMAIL.COM
___________________________________________________________________________________
[PLAYLISTS:]
TECH CORNER PLAYLIST: ruclips.net/user/playlist?list...
PROJECT HOTWHEELS: ruclips.net/user/playlist?list...
BLACK CAR: ruclips.net/user/playlist?list...
GRUDGE NIGHT RACING: ruclips.net/user/playlist?list...
DADS CAR: ruclips.net/user/playlist?list... 
Авто/Мото
Every one always says budget build ant no such thing show me I want one an we can put it on the channel you helping a fan
Thank you for this video! I've got 2 blown transmissions, one from me and one from my buddy. I've been waiting for a easy T5 rebuild video. Can't thank you enough!
TKO-600’s are good transmissions as well. It’s really all about how you treat these transmission, a T-5 doesn’t like to be launched on a prepped surface with a sticky tire, they can split. One way to counter act that is too run a higher read end gear ratio and a lightweight rear end fluid.
My T5 worked better with a slick and worked well with a small turbo on a stock block build. 2-3 different cars here on channel.. THe TKO isnt being made much anymore and im pretty sure they stopped making replacement parts for them. Been like that for years. TKX was its replacement...
Damn good video🤘
Great video on transmissions neo thanks for sharing..
This is an awesome vid. Those needle bearings gave me a shudder though lol. Tremendous!
Awesome rebuild, awesome job on how to...
Awesome, I just picked up a 1990 h.o. long block tonight. I'm hoping to use your piston flip tip and get some good heads. Tha ks for the inspiration.
You made that look easy
Heck yeah!
Badass brotha I've never attempted a t5 rebuild don't look to crazy I'm sure with some practice I could get it done 🙏🙏🙏
Hell ya
Good stuff..I used a Z spec for 4 years in my car going 11.20s. Never had an issue with it. Used a CenterForce dual friction clutch. That was 20 years ago...
I could use that rebuild kit! 1000 bucks that is great info i could use.
What ends up breaking next after these upgrades? Considering it for my 355cid boss-headed motor.
That's a real gear head. Great video
Thx man
I just doctored up a set of gt40p heads. Can you give me a part number on a set of long tubes that will work? 5.0 going in a 88 gt with a t-5. Keep the good videos coming Bro!
I've read about guys using 90' tbird v6 super coupe 5spd trans and stock are much more potent then a t5, is similar to the f150 302 trans but better I guess. I have one i may try and they bolt right up. from what I've read, ford switched to this trans which a mazda trans cause the t5 was to weak for the supercharged v6. My concerns are shifter position but wouldn't be a huge issue to fix, mainly the driveshaft length. Have you ever seen this swap and what are your thoughts? love the channel
Nice!
Thanks!
t5 the best shifting transmission i have ever used up until it breaks 😅
Tips and tricks for the people, by the Master
Thx matt!
Have you ever heard of or ran into the issue of swamping out a t5 to a tr3650 in a sn95 and ran into the issues of hairline cracks in the dovetail of the tr3650 after being installed. Nothing is hitting in the cases and have been through like three dovetails with same issue in pretty much same place. Or should I just take the T% and build it and put back in the car?
very nice i cant wait to tear into one.
wow!!! do you teach classes on this...!! Its good to know there's this kind of work..i'm a foxbody guy..I've got a T5 im wanting to rebuild,,Nice work!! you made it look easy peasey..
Hanlon MOtorsports sells a DVD (they need to upload it to RUclips). Thats where i learned many years ago..
@@Neomustangs🔔😎🇺🇸
great video. I bought it 3 yrs ago. 👍👍😎
YeeeeHaaaaaw!!!
I remember rebuilding my 4 cyl T-5 years ago, pretty easy transmission.
I got to go back through it soon because I think I’m hearing a noisy countershaft bearing, i used a cheaper rebuild kit that I got from a local transmission shop and regretted it as soon as I picked it up as it was missing several shims, and one of the washers that sit next to a circlip on the main shaft between 3rd & 4th gear was about .003’’ too thick which was causing the circlip to spin in its groove and made a noise. I had to tear the transmission apart four more times after the rebuild to find that. Lol
It’s why I pay for the tremec kits. Always quality parts.
@@Neomustangs Where do you get the Tremec parts? Is this what Hanlon uses in their kits?
@@umtigers001 yes
@@Neomustangs now that you mention it, I think I’ll just go ahead and get the Tremec kit and go through the entire transmission again with quality parts this time.
Hopefully they have a 4cyl T5 kit since mine uses a smaller input shaft and bearing than the V8 T5.
Worst case, I’ll use everything else from a V8 T5 rebuild kit and source my own Timken input shaft bearing.
As far as I know other than the gearing being different, everything else is supposedly the same between the 4 and 8 cylinder T5 transmissions.🤷♂️
I’m running a 2.3T so I need the gearing the 4 cyl T5 has.
Some 2.3 guys will use a V8 T5 but then they have to re-gear the axle.
1:27 💪
So the only upgrades are the counter support and front retainer? Other than that you're reusing all the oem gears that are not broken?..
Sure. That’s one of the main reasons they break Flex from the case, the counter and input thru the trans under load……
@Neomustangs good to know I have a bad t5 I've been wanting to lean off of. Great vid bro 👍🏼
Cool video. Is that all by memory or do you still check a assembly manual throughout slapping it together?
Memory
Neo I was wondering if I was to swap in a TKX or T56 what Do I need as in parts to bolt the trans to the 351w bottom end in a fox body. Thank you
Tkx bell and crossover. T56 is a whole swap kit
Thank you. For the info I’ll look into that
Also if you cryogenic freezing to your gear get and shafts = 20% stronger.
no
I had 468 at the crank on a stock t5 and some auto zone clutch, which I use to punish. Have you blown alot of them?
Yes! I used an auto zone disc with my spec 2+ pressure plate worked well for years
Life time waranty here from like 1998. I had a clutch from oreilly and they didnt honor the waranty cause i didnt have reciept. Autozone however kept it in the computer ive had two clutches from them on that waranty since 1998. I try to buy from autozone over the rest of em cause of that. I shoulda just made xerox copys of the reciepts in heind sight
Thanks for sharing!!…I have a T5 out of a mustang 2.3L…could I buy the kit to convert this to a T5 from a V8 car?
Yes you can i already made this video. Go search "T5" in my channel.
How long does it take u to break one down and put it back together? What do u think about those AMP gear sets called super street rated at 450hp for $899 2.95 first gear or u can get street gear set 400hp for 599 i think. I've been thinking about the super street cause I believe that it would hold 500 which is about where im at .Do u think they are worth it?
Not long. Never heard of that one
The counter gear doesnt seem preloaded? Spinning freely? I preloaded mine a bit and it only spins a few times. I rebuilt a WC T5 for my IROC, replaced the 3/4 hub, had the output shaft sleeved on the front by universal machine in Portland. I hope I didnt fuck up with too much preload..
im sure its fine.
Slight preload is better than loose.😳
Have you ever tried the gforce upgrade kit for the T5? Only $1500 bucks and supposedly good for 600 tq. Debated trying it when my T5 goes.
I have not.
Bronze fork pads. Are they good or bad? I used them in my trans. Great video 👍
Not really needed
May be a dumb question, I recently upgraded to the Tremec Super Duty T5 and I have two 4cyl T5’s laying around that I’d like to rebuild for spares. Will this kit work in those cases? If so, do you have a part number for the rebuild kit?
Shawn i made a video a year or so ago about that very topic. You will need cluster, 1-4 gears and you should be set. TOp plate, case, tail shifter forks/rod all thats the same. You can even reuse 5th and reverse...
@@Neomustangs thanks for the info brother. I’ll be hitting Andrew up soon.
Great video! Where can I get a good quality rebuild kit?
Hanlon Motorsports
Thanks, went on their website but seems they don’t have the WC T5 rebuild kit. Only NWC
Is the G force upgrades with it ?
No
I say save up get a tko500. I got tired of blowing 2nd gear on the t5s.
TKX not the TKO. The tko isn’t really being used much anymore.
What clutch do you recommend for that t-5?
One that has a little slippage to it. Don’t need an aggressive clutch
@@Neomustangs
King Cobra?
@Neomustangs So are you saying a clutch with a higher horsepower & torque rating would grab harder and potentially damage a t5 sooner?
No folks it’s not his first time lol
Stop being nosy 😂
Being what?