AGFrc A06CLS servo for my GL Racing GLD performance update

AGFrc A06CLS servo for my GL Racing GLD review and performance update
A06CLS retail price for $59.99 USD
AGF-SP v2 SRP :$19.99 USD
Don't forget to recalibrate your end point of the gyro, every time you change servo or adjust the settings.
Negative ackerman not bad but, the goal to get neutral ackerman as possible
long awaited upgrade parts for my GLD kit, with the new servo, the performance of the car improved drastically, I was able to control the car to the direction I want, I Highly Recommend this!
if you are going to build a drift car, make sure you get a very good servo.
the stock servo of the GLD is really bad, and you will hate the car.
The GL racing kit is not the only problematic and bad quality control company, most 1/24 or 1/28 scale kit have several complains, like imperfection with fittings issues and weak plastic small parts.
we need to understand that micro scale will demand precision in manufacturing, they need to used stronger impact resistance plastic, which will cost more, any new product will be ok if customer service are exceptional, which most of the manufacturing lacks.
If you still want to start with this scale of rc, you need to have patients, test and guidance.
#glracingissues #glracinggldissues, #glracingglddrift #glddrift #gldworstrc #gldqualitycontrol #glracinggldqualitycontrol #glracingworstcompany #glracingworstcustomerservice #a06cls #agfrca06cls #agfrcservo #agfrcprogrammableservo #agfspv2 #howtofixmygld #glddrift #gld1/28 #olivers_toys #oliverstoys #yokomoyd2s #yokomoyd2sxiii #driftackerman
Facebook: Oliver's Toys RUclips Channel
Instagram: Olivers_toys
Music by:
Dulce reggaeoton
An Jone
tags:
how to make the gld drivable, how bad gld drift rc, Gld quality control issues, Gl racing bad customer service, what wrong with my gld, What wrong with gl racing,Gl racing worst customer service, AGFrc A06cls,Agfrc servo, gld performance update, gld drift issues, gld solution, how to make my gld drift, worst drift kit gld,#glddrift,#glracinggld,#olivers_toys,#glracingissues,#yokomoyd2sxiii,#yokomoyd2s,#driftackerman,why i hate my gld, how to fix my gld

[@nixosnixos1227]

Hey man, thanks for doing this video.
Especially the settings part.
I followed your settings @3.45 everything lines up perfectly at the front for me. Now I believe I have something wrong with the motor it gets extremely hot very fast and sometimes at lower speeds it makes a creaking sound and stops moving. If i continue driving I smell burnt. Do you have any idea what might cause that? It's a 3500kv gl motor.

[@nixosnixos1227]

I also was able to make the rear end shorter than the front by using the short arms, 0 camber and Narrow 0 offset wheels. Now i need to figure out the length of the rear turnbuckles to make the wheels straight.

[@oliverstoys8411]

Thanks, i really appreciate your comment, i am assuming the your pinion and the spur gear enough room to wiggle a little, i am using stock spur gear and don’t remember size of my pinion gear(second to the smallest gear), i hope you join the facebook community “custom 1/28 GL drifting” dedicated to GLD, i am using cheap 3500kv rocket motor, i hope you can post some pic or video at the fb page so members can help.

[@oliverstoys8411]

And can you test the motor not attach to the spur gear and let it run slow speed? Does it run normally without the creaking sound? If it still have the same issue, it might be the motor, I hope you can ask for a replacement motor from the dealer you bought it from.

[@nixosnixos1227]

@@oliverstoys8411 removed the pinion and let the motor run. There's no noise but it gets burning hot with smell in less than a minute.

[@oliverstoys8411]

@@nixosnixos1227 that’s not normal, did you contact the seller, and ask about the issue? I hope they can replace it, how about your motor terminal soldering i assume there fine.