New turbo for the FUMMINS!!!!!
HTML-код
- Опубликовано: 12 мар 2020
- Have a look at the new turbo and manifold and tear down of the old setup!!
#cummins #fumminsbuild #fummins #cumminsswap #cumminsswaptheworld #12valvecummins #12valveswap #towrig #dinosaurpower #twinturbo #compoundturbos #mechanicalmafia #dailydriven #12valveproblems #youtube #thefumminspage #heavyhaul #hotshot #heavyhaulling #trailers #farming #cattle #trucking #ranching 
Авто/Мото
The common rail plenum gasket is actually a mls gasket. But anyone that still uses the paper I would highly recommend going to the common rail gasket. With the original plenum plate it will cut the paper causing a leak. I switched to the mls and it does allot better under pressure.
Keep up the great videos. 👍
Stephen Johnston should have another one real soon
Hell yeah
👌👍
Sorry the seals were blown on the turbo but I’m glad it got you by for a couple more days. I mean the truck only had 317,000 miles on it when I took that one off. 😂
Geoffrey C haha no worries it got me by until now so that’s all I needed!! Thank you very much by the way!!
Curious why don't you hotshot professional use snow performance
Just got my F450 6BT started and driving just trying to figure out my white smoke at idle and acceleration it’s not a shit ton but enough to know it’s not right
Ronnie J one thing you can do is take the intercooler pipe off the driver side and let it idle for about 15 minutes if it stops smoking then you know you’re getting oil in the intake from turbo possibly. If it doesn’t fix it, it could possibly be a timing issue or a blown head gasket where and oil galley is or a cracked head or leaking valve seal. If you pull the valve covers you should be able to see if a valve seal is lifted and if it is that’s where the oil is getting burned and reason for the smoke!
TheFumminsPage rpope I Hope it’s not a head gasket I literally just broke the engine in after install the motor came right from the engine shop full rebuild with 44 miles on motor but I did use the original turbo and injectors off the old motor with out rebuilding or replacing them them
TheFumminsPage rpope I’ll definitely try the cold side pipe tmrw and see how that works I did already order a set of injectors that will be here Tuesday as well so hopefully something works
Ronnie J awesome let me know what you find!!
TheFumminsPage rpope if you wanna see it it’s one Fummins tech on Facebook Ronnie LaPlaca
Wana sell that hx35 I got a h1c on my 93 motor and want to find a good hx35 but dont want to buy a turbone