Ultimate towing FUMMINS is back!

[@skyler13827]

Excellent work, It would be great if in a few thousand miles you could give a review and a detailed rundown on your setup. Thanks for the videos

[@preachermanj]

Love the fummins videos…also appreciate all your advice getting my build done!
If you get a chance…we would love to see an update on the “ultimate towing fummins” now that you have a few miles on it!

[@thefumminspagerpope4452]

Thanks!
The truck is still doing great over 600,000 on the engine and 300 on the truck still getting the job done

[@ashfordcombs8658]

Man that thing is slick. Love the paint and aluminum set up. Can wait to see some monster load pulling with this thing. And you get it dialed in try the Dino again would love to see the numbers too the ground it makes. I bet around 450 hp. 1100 ft lbs the way it sounds now. Great job man love it

[@eliteoperator2924]

I just acquired a 12 valve motor. I think I need to find an f350 for the swap now. I like this.

[@That_Teal_fummins]

Love the setup I went Similar K27 over s369 in a super duty. 5x.012 wanted a tow rig. The only thing I don’t under stand is how any of the pipes don’t crack being solid V banded. I was going to go that route but ended up using boots.

[@brianherron5400]

Looks great, nice work 👍

[@detroitgarage9430]

Very nice, awesome job.:)

[@geraldhawkins2643]

Very Very nice job absolutely love the cummins, just a heads up the sound keeps cutting out

[@thefumminspagerpope4452]

Ya I’ve got to get a new phone🤦‍♂️ lol

[@EarthRoamingAdventures]

Awesome were did you get your Trans tune?

[@hello-wi3nu]

hi:D

[@cumminschevy5275]

Been on standby looks badass 👍

[@anthonybalulis4822]

Hi amazing work!!! I’m heading down the fummins build also I have tons of questions I’m not sure what way to go with what head studs and fire rings vs just o-ring the head. I pull heavy also the guys at pdd are telling me to go with the he351/s472 combo

[@thefumminspagerpope4452]

Definitely go orings, and I would agree with them in the he351 over 472.
The exotic head studs get my vote lol

[@kentmiller4363]

Great work! Looks like you have put in a ton of time researching for the right setup. I'm getting ready to order the parts to do a swap in my powerstroke. I'm in Aledo, I'd love to buy a 12 pack and come over and check out your set up. Let me know

[@thefumminspagerpope4452]

Hell ya man I’m in weatherford most all the time

[@kentmiller4363]

@@thefumminspagerpope4452 Who did you say went through your pump? Im looking for a local place to do mine.

[@thefumminspagerpope4452]

@@kentmiller4363 Ferrell diesel service

[@timallred6789]

Love it can you do a vid on explaining the. Bypass filter and other rad filter you have and how you installed them
I have a 2004 f350 fummins daily (zf6 s6-750 currently hunting parts for manual swap) and am haveing issues finding a rad filter set up that works well

[@thefumminspagerpope4452]

Yes I can

[@timallred6789]

@@thefumminspagerpope4452 thank you so very much

[@edgarcruz8626]

Nice work. What kind of platform build would you recommend on a 24v to tow the way you do?

[@thefumminspagerpope4452]

24valves pull grate from the get go, but s as n he351 or k27 is a good upgrade plus a quadzilla and a lift pump

[@darth_taterz]

save some sauce for the rest of us

[@Ryan-il5og]

Could you do a update on the fummins truck now that you have the zf6 been following for a few years and wounder how its going. Thanks have a 04 4x4 with a zf6 and a 12 valve and looking to compund it. What clutch are you using hows it holding up?

[@thefumminspagerpope4452]

Yessir I can
It has a southbend dual disc ceramic
Everything is great with the truck and running strong. Close to 700k miles on engine now

[@Ryan-il5og]

@thefumminspagerpope4452 thank you your the man I love that you practiced up on your aluminum welding and made your own piping. Sounds like a expensive skill but has encouraged me to spend the time and money to take it on.

[@thefumminspagerpope4452]

@@Ryan-il5og yes to get started on aluminum tig welding is expensive lol but well worth it!!

[@Alex-bh2zk]

Was the VS racing 66 their v band turbine setup?

[@thefumminspagerpope4452]

No it’s a T4

[@dixiemae5042]

First 👊🏻💪🏻

[@cocobean7391]

What did you all end up doing to the motor

[@thefumminspagerpope4452]

Cylinders a bored .040 over new Marin pistons .006 taken off block and head.
Original head with new valves and larger springs.
Original rods and crank
New 178/208 cam with new tappers
Stock push rods
Oringed block with exotic studs

[@preachermanj]

Awesome build…watched all videos! About to dive into a 2010 6.4 swap. May need to lean on you for advice…especially when it comes to getting the 5r110 to play nice with the Cummins!

[@mattwnovak]

You planning on making anymore videos?

[@thefumminspagerpope4452]

Half of me wants to half of me doesn’t lol no motivation 🤣

[@mattwnovak]

@@thefumminspagerpope4452 motivate your ass down to dallas and help me finish up mine 🤣

[@thefumminspagerpope4452]

@@mattwnovak welll it’s not really that far lol

[@mattwnovak]

@@thefumminspagerpope4452 honestly i wouldnt mind some help doing a vband intake, and you got a machine shop you’d recommend for oringing my head?