SolidWorks Tutorial
HTML-код
- Опубликовано: 12 окт 2016
- sw-tc.net/#233 SolidWorks Tutorial curved blades propeller. You remember the student propeller, now time for this propeller! ) Twisting & bending values can be adapted to your slow simulation results !!
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.com/u/0/b/1027607...
■Donation :► www.paypal.com/cgi-bin/webscr...
Hey guys I learn a lot with your techniques. Thank You so much!!
And also yeah some simulations tutorials with this would be great
Merci. Tuto concret, solide et bien expliqué.
Nice job guy/girl. Would it be possible to put it in a simulation?
not sure if you take requests but a juicer would be great
How would you design a fin for a surfboard? With surfaces or as a solid?
Very good, can you demonstrate the three-dimensional modeling tutorial for the runner of the Francis turbine?
How the hell did you make the fin? I still can't figure it out, without sound it doesn't help at all.
Im trying this in 2019 and it is not allowing me to do the circular pattern unless the fins are merged to something. Can anyone help??
Muito bom video. Bem explicado !
I was excited that this was going to be an actual tutorial. Needs to have a narrator.
merci beaucoup pour ce tuto
merci beaucoup, excellent
How did you obtain the flex parameters for this model? Great job by the way!
16:45 I can still see the bit of the first propeller blade that you left out on the inside, but then at 17:10 it's gone.
Did you edit yourself correcting it out of the video, or was it somehow removed while you were adding the fillets?
He probably edited it later but didn't include that in the video. Anyway. I don't think the excess part was removed while applying fillets.
at 11:45 he sketched a circle and applied a cut extrude to remove the excess part of the first propeller blade which I believe isn't the right way to do it.
A proper way of removing that part would be starting a sketch on the right plane and apply a revolve cut.
anybody knows how we can get drawing from this propeller?
I can not put the pieces in that brightness. What should I do?
16:44 I used the complete fillet , is less fast but it looked nicer
Thanks a lot!
Good job
Thank you very very kindly
Nice work ,a lot of steps though much easier in Fusion 360 using coil.
Just took the long way, you could do al chamfers and fillets on the primary piece...
nice drawing right up to the blade form ,,,,props are not flat plates that are bent/twisted ,,,maybe a couple of surfaces on 2 control helical edges and then join -top and bottom control curves ? to get a more efficient shape then it a make a solid/ trim
Correct Peter, I was going to say the same thing. The blades are of a helix profile equal to the specification, 14" dia x 24" movement per 1 revolution
Is it normal that I got no sound from this video?
Cool!
Why I cant hear anything.
the circular pattern didn't work, error
❤❤❤❤Excellent ❤❤❤❤
y el desarrollo de la aleta para fabricación???
and the development of the fin for manufacturing ???
Dobrý večer p. Babiak,
Je to 7 ročný stroj a nie 2 ročný ako to píšete. a nezavádzajte iných. Je to úbohe a zbabelé. Tento stroj veľmi dobre poznám..... Pokiaľ viem problém je niekde inde.....Neklamte . Karma je zdarma.
Mantepp 👌👍
Hello, I don't use my SOLIDWORKS program much because I have another project at the moment! If anyone has a desire I can give the program for trainings or exercises.
Now I can make my turbine lol
share your turbine so i can be inspired to do same xd
@@homieknowme223 just finishing semester, wait for it I'll do it...
I don't hear vois
none :(
very cool
visit me too
This is not how propellers actually work
This video just shows how to make a simple one for non technical purposes.
Ha, ha! You nicely show some tools usage, but this does not have a single point for proper propeller design!
Too fast movement
And this is quite slow...
yo this is wack my guy.
Cult Cargo.
Вот что за извращенцы рисуют эти винты,теряя минимум 50% мощности.
Speak in English