SolidWorks Tutorial
HTML-код
- Опубликовано: 12 окт 2016
- sw-tc.net/#232 SolidWorks Tutorial Turbo pump, the previous made turbo was built in the car engine tutorial
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.com/u/0/b/1027607...
■Donation :► www.paypal.com/cgi-bin/webscr...
Amazing SW video showing interesting resources, specially "fillet". If fact, drawing curves surfaces and progressive fillet resources are always a challenge, but with perseverance anyone can do it - obviously for medium/high level SW learners. Thank you!
Best Channel for CAO ! Great work
un seguidor desde mexico haces un excelente trabajo con estos tutoriales. gracias !
I absolutely loved this video and I appreciate when you and people like you do video tutorials like this. I am a student at Los Molinos CA. High School and my Agriculture Teacher Ms. Steagall would love this a lot keep up the good work
厉害啦
Hi, Do you have a description of all of the individual parts?
I would like to know the sources of drafting you have used to create the model.
Dear sir, Have no words for you !! Big Salute !!
Bro where is pdf of these 3d modelling??
What appearance in that solid?
¿Cómo le das ese efecto ultrabrillante a los modelos? Tengo solidworks 2015
hi !! good work , can you give me the definition of drawing for WHEEL Loader ?
thank you so much.i tried it and i got it
wow! this tutorial video is amazing!
Could you share the specification of your machine?
why when i try running stress analysis test the program says that there is an interference problem between the compressor cover and the compressor wheel *please help me i have a submission tmrw*
Why you didn´t show the material that use on any piece ? you must show us
Can anyone will tell me that why these type of impellar is used ? Benefits?? efficient?? Plz tell me
How can I access the technical drawings of these drawings?
amazing
1:00:11 two holes not concentric. How to slove the problem.. Pls explain that
can i get all of the dimensions for the parts
Hello my friend and thank you for the video. I have a question. In the first part solidworks won't let me use the Hole wizard. Do you know why? Thank you
maybe because you haven't selected a surface or a plan at first ...
great!!
can u show us the materials per part? thanks
x学习
can you send someone of this part dimensions?
If it is possible, can u share 2D technical drawing? Thanks.
can you please make a video of kiosk please
why colors are not on my computer ?
I did not find Tap Drills. How to get it. You can guide okay
Can you show how right create drawings and specifications?
I have the 2D drawings. I did them following the tutorial, Write me to email: ticoarias57@gmail.com
me too. i'll write you.
I think there was excessive use of multi radius fillet when the operation could've been done with a loft through multiple profiles. I find the use of loft feature and guiding lines provides better control of the base geometry.
I normally leave fillets and multi radius fillets to round up edges, not to define the geometry of the part.
Can anyone help me out by explaining what exactly happened at 53:00.... I mean when we r getting the angular contact ball bearing into the graphics area from design library the actual size is small.How did it fit accordingly into the disc
Please let us know any keyboard shortcuts used? Or How to get the desired size of angular contact ball bearing from design library?
Good sw ...yar.
Can u pls share u r 2D sketch pls
The bearing of the pump shaft is not 3310 because the shaft has a diameter of 20 mm, so it must be 3320.
hi. Do you know engineering calculation of pump manufacturing?
if u do, can u please share it with me?
Hello there
Can you help me?
I get stuck when try to make the bearing
I cant found any of it
Can you tell me step by step to found the ball bearing?
Thank you
Yeah i also cant find the bearings i have the solidworks tool box add in but for some reason the parts inventory does not include bearings which sucks cuz i have been making this turbo for like 3 hours lol
@@alexdragota6890
First configure the toolbox. Then use it. Solidworks help has a detailed description.
Imazing design. But become more useful if explain every command in English.
Nice Sir like for you
hi i need totoriel rolle forminge
por que no compartes los colores? en cuanto idiomas quieres que te lo escriban si seras amable de compartir las apariencias?
Can you share each apperance? Kannst du bitte es teilen ?
Disculpa, me podrias pasar el plano de las piezas??
Yo tengo los planos de los despieces, los hice siguiendo el tutorial, escribeme a mi correo: ticoarias57@gmail.com
Luis Alberto Arias Echeverri me podrias pasar los planos bro¡ keyner.mec97@gmail.com
how can i find the source file for this ?? Can anyone helep me
could share the E drawing?????????
Please speak dimensions also when you make the drawing.
mersi
does anyone have the drawing?
Where is the impeller?
The impeller are the disks themselves. It is like a Tesla turbine
@@xeels2708hello man did you understand how this turbo works can you help me 😅
Anyone have a 2D drawing with dimensions?
Where are the gaps?
I believe this is a Tesla pump, not a turbo pump
Plz share PDF file
43,45
xin file part
Name of the components please, anyone 🙄
You skipped part 5
36:05 de ne oldu anlamadım
bu parcaların teknık resımlerını nasıl bulabiliriz ya?
trot bi1 le tutaux pour saulydewaurkce
31.31
h好厉害
Gaskets, anyone?
What is the appereance you utilizes, i like the goldish tone, but how do I create it, can you give the parameters of the colors?