Hey there! i want to thank you for all the tutorials you do, although i dont do all of them they helped me to learn this program, and it keeps helping. You are awesome, keep it going!
Hello, I wanted to ask them if they have any video that explains how to model a magnet, but assigning magnetic properties (north pole and the south pole), so that they can be seen in some simulation or mechanism (motion movie). Thank you very much.
I started doing some of these examples. Yet, I couldn't figure it out how I can make the pieces shiny like in the tuts. I tried changing appearance, but it didn't work. Any help?
I figured it out. Realview graphics was disabled. I think Solidworks only support some of the quadro graphic cards. As I learned, we should add the card manually from some of computer settings to turn realview option on. Thanks Gabriel Davies anyways :)
which graphics card do you have? If you are using any of the Nvidia GForce cards this link has a tutorial to fixing the issue. grabcad.com/questions/how-to-active-solidworks-realview-graphics
I have no graphic card in my laptop. But i managed to get that appearance. Its called Real View graphics. You need to change the registry for that. There are many tutorials on RUclips on how to change the registry to activate Real View Graphics.
very good job, thanks for video. But in assembly, i experienced a problem at 1:06:34. when i try make coincident relation between magnet and cover i get fail. is there anyone who get the same fail? please help!
@@Solidworks_Tutorials bro is this motor on your channel & grabcad have exactly same dimensions as of Solidworks Tutorials channel's motor? I need readmade motor & rotor coil so i can make another things which uses dc motor & rotor coil in his another videos. Please ans
READ BEFORE YOU START THIS. I'm so angry, first this DC motor is not this 1.30h video, but also the Rotor, which is 1.18h video additional. I get pretty pissed when I'm finishing this video and then discover there is a second one you must do in order to finish the motor. I do the rotor and surprise, in the final assembly the guy doesn't realize there are physical collisions (the rotor is crossing the case) so this design is physically impossible. There are also many other collisions because the design is not well done since the guy never used "calculate physical interferences"
Thanks for sharing this informative video. SolidWorkTutorials Rocks!
Hey there! i want to thank you for all the tutorials you do, although i dont do all of them they helped me to learn this program, and it keeps helping. You are awesome, keep it going!
Great works for all tutorial
Thanks. I just made this and the effort was worth it all because of you! :) Great Tutorials by the way!
So great tutorial for learning solidworks
Awesome, that's beautiful❗️
Спасибо, получилось повторить полностью, очень полезные видео
Thanx! Very usefull video!
The man. You are a god among engineers
Yes. He very pro. ....
thank for video,it's great
Nice video, thanks for sharing it :)
tks for this video
Very nice thanks
Mantaaapp👌😍👍
Awesome
Nice
Hello, I wanted to ask them if they have any video that explains how to model a magnet, but assigning magnetic properties (north pole and the south pole), so that they can be seen in some simulation or mechanism (motion movie). Thank you very much.
😱😱😱 perfecto
Awesome
Hey. How do you get exact dimensions? Can you please share link or website?
Anyways, your videos are really great.
how to calculate can heat sink end bell armatures is fit?
What is it vertion?
are there related files for this project? thanks.
could this dc motor be used for an electric bike hub motor with planetary gears ?
Why don't you show appearences that you use, but besides that nice job, really great engineer :)
Great!!!
Please make an AC motor
it's the same but you have to replace the magnet with a bobine
good luck
Part 2 looks like a camera case LOL.
Can u try to make a camera in Solidworks also?
Thanks!
Camera in solidworks very easy to use
I want to download this part...can you provide me link?
Error 1:54 . You need a horizontal size of 15mm, not a vertical size.
I started doing some of these examples. Yet, I couldn't figure it out how I can make the pieces shiny like in the tuts. I tried changing appearance, but it didn't work. Any help?
I figured it out. Realview graphics was disabled. I think Solidworks only support some of the quadro graphic cards. As I learned, we should add the card manually from some of computer settings to turn realview option on. Thanks Gabriel Davies anyways :)
Turn on realview graphics if not there then u can refer some youtube videos .hope this can help u☺️
You can use real hak for shrink
its awesome
can u please tell us the different btw SW2013 and SW2016 ?
You can see more different between 2016 and 2012 at ribbon toolbars
Bro plz give audio explanation
To select which one for which diagram
love the shiny metal looks, my laptop can't do that :(
which graphics card do you have?
If you are using any of the Nvidia GForce cards this link has a tutorial to fixing the issue.
grabcad.com/questions/how-to-active-solidworks-realview-graphics
I have no graphic card in my laptop. But i managed to get that appearance. Its called Real View graphics. You need to change the registry for that. There are many tutorials on RUclips on how to change the registry to activate Real View Graphics.
Hello! I made the motor the way you did but could not run the 'Basic Motion'. When I run the simulation...it won't rotate. Please help!
may be your computer is so weak, so i couldnot run
Seach for add ins in solidworks and there is option for solidworks motion turn it on u will get option for motion analysis
very good job, thanks for video. But in assembly, i experienced a problem at 1:06:34. when i try make coincident relation between magnet and cover i get fail. is there anyone who get the same fail?
please help!
Yes i fail also , please give me the solution
can i download the file?
If I want to download the motor ?
You can download those files on my channel. Solidworks tutorial hp
@@Solidworks_Tutorials bro is this motor on your channel & grabcad have exactly same dimensions as of Solidworks Tutorials channel's motor? I need readmade motor & rotor coil so i can make another things which uses dc motor & rotor coil in his another videos. Please ans
❤
1:05 st
17:50
29:50
43:00
46:20
49
READ BEFORE YOU START THIS.
I'm so angry, first this DC motor is not this 1.30h video, but also the Rotor, which is 1.18h video additional.
I get pretty pissed when I'm finishing this video and then discover there is a second one you must do in order to finish the motor.
I do the rotor and surprise, in the final assembly the guy doesn't realize there are physical collisions (the rotor is crossing the case) so this design is physically impossible.
There are also many other collisions because the design is not well done since the guy never used "calculate physical interferences"