Solidworks tutorial | sketch Wheel Rim in Solidworks
HTML-код
- Опубликовано: 18 дек 2016
- in this tutorial video i will sketch Wheel Rim in Solidworks with the help of sketch and feature tools.I hope you like it.
Please subscribe our channel for more videos and projects in Solidworks. Please Like and share Our videos.
Thanks for Watching.
AMAZON INDIA
3Dconnexion 3DX-700028 SpaceNavigator 3D Mouse
amzn.to/2xGprwt
3Dconnexion 3DX-700043 SpaceMouse Wireless
amzn.to/2iSTC07
SpaceNavigator Notebooks USBF/ NOTEBOOKS USB
amzn.to/2wyoCpE
Hermitshell Travel EVA Protective Case Carrying Pouch Cover Bag for 3Dconnexion SpaceNavigator 3D Mouse 3DX-700028 3DX-70034 3DX-70043 Colour: Black
amzn.to/2gBRlWI
Mivi Thunder Beats Wireless Bluetooth Earphones with Stereo Sound and handsfree mic (Gun Metal)
amzn.to/2xH5V3c
TeckNet Pro 2.4G Wireless Mouse,Nano Receiver,6 Buttons,24 Month Battery Life,2400 DPI
amzn.to/2eyVIAW
SOLIDWORKS BOOKS
AMAZON INDIA
Solidworks 2016: A Power Guide for Beginners and Intermediate Users
amzn.to/2x2mJo9
Solidworks 2017: A Power Guide for Beginners and Intermediate Users
amzn.to/2eRLdpr
SOLIDWORKS 2016 BASIC TOOLS
amzn.to/2evb5Hc
SOLIDWORKS 2017 Reference Guide
amzn.to/2wxHvJm
SOLIDWORKS 2016 Reference Guide
amzn.to/2wy6Mmq
Solidworks Simulation 2017 Black Book (Colored)
amzn.to/2iS2oeV
Solidworks Simulation 2017 Black Book
amzn.to/2xGVIUs
SOLIDWORKS Simulation 2016: A Tutorial Approach
amzn.to/2gzQi9E
An Introduction to SOLIDWORKS Flow Simulation 2016
amzn.to/2guzsW6
An Introduction to SOLIDWORKS Flow Simulation 2017
amzn.to/2euX8cj
1)Solidworks tutorial for Beginners.
• SolidWorks Tutorial Fo...
2)Solidworks tutorial : Assembly
• Solidworks tutorial: A...
3)Solidworks tutorial vertical Stirling Engine
• SolidWorks Tutorial Ve...
4)Solidworks tutorial Forklift
• forklift Project in So...
5)Solidworks tutorial for beginners in Hindi
• SolidWorks Tutorial in...
6)Solidworks tutorial : Assembly in Hindi
• Solidworks tutorial in...
7)Solidworks Projects
• SolidWorks tutorial
like Facebook pages for drawings.
/ cadcamtutorial
/ cadcamtutorial
thanks man, i love your videos and it helped me alot. greetings from sweden
Ur video really awesome...and also ur guidence of speaking.
Thanks! wonderful SOLIDWORKS instructing videos! 😎
This helped so much thank you very much sir !
Very good video m8! I have sorted all my problems from this! Cheers
Amazing
So good ... Thanks
Nice works my bro!
Great work sir
Thanks for your videos, they are great and well explained.
Elias Avendaño Garcia,you are the most welcome,
Amazing! Thanks for up load
Thanks.
Really nice
Man. Thanks sooo much!
good video, thanks you for share!
très bien fait, merci à toi
Thanks.
so good😀😀😀😀
Thanks for sharing.
awsome thank you
Hi, Than you for your video. A quick question: Shouldn't you have gone back and merged the face you had unmerged on 13: 29?
so nice sr
Very easy to understand an english man from india 😁
very nice :)
Thanks.
can you suggest how to make hexagon using the revolve feature?
Thank you so much.... very useful
welcome, please share our videos which is help us to do more and more in Solidworks thanks,
Done, :D
sir i like ur videos so much. Sir please help me out, when i click on fully define sketch it shows unsolvable, i have selected all the relations , but dont know why its showing unsolvable and conflicts
Please help me sir
thank you so much
welcome,
Bonjour monsieur, excellent travail
J'ai un petit problème si tu veut m'aider....
Dans l"esquisse , le curseur de la souris porte toujours l'icône cotation !!! Même si cette dernière n'est pas sélectionné et lors ce que j'appuie sur une trait pour afficher une cotation elle ne s'affiche pas ....si c'est pas clair je peut vous envoyez une capture d'écran ...merci d'avance...
好强啊👍
Nice. How did you get the shine
hello my friend.
can you teach some other aspects of Solidworks like simulation or mold design or assembly?
thank you very much
sure i am working with simulation & mold works,
Good job but for a perfect rim you are missing the space at the back side of the rim for the axel of the car. so this show that your are great at drawing but still needs to know something about what your are drawing and how it is used and mounted.
Really great drawing work.
When creating the barrel of the wheel the sketch is not fully defined, the radius of the curve of the barrel is the issue here. I am unsure as to why though? Any pointers to make it fully defined?
Do you have any technical drawing or are you measuring the entities randomly?
same question
At 5:05 dimensions are not changing. It is saying that dimension selected is a driven dimensions and cannot be changed.
Splined lines are difficult to control.~
thx
What material do you use??
anyone know where to find the wheel standard sizes and dimensions?
Nice!
Dear if I give you a modal to design a machine which is not too complex(as compare to your videos) can you help me to make it.
Or give me another link.
Thanks.
Which version are you using??
well if i have to draw to to 13 inch rim what should be the measurement?
Nice tutorial, but it could better for learning first a complete drawing.
why don't you use hole wizard to create the holes.
It is much better .
its a good idea i can.
hi, how do you make the appearance of your part to look more glossy?
For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
Intel HD graphic 3000 support real view..
@@CADCAMTUTORIALBYMAHTABALAM you can do it by regedit
Hallo sir, I like your videos, but if you gonna teach people how solidworks works, than you have to take care that your scetches are always fully defined, cause this is the first thing you have to learn about CAD design.
Cheers
i agree, i started following the sketch but ran into the problem good video overall just the approach should have been better executed
When i try to make the circular pattern, it didn't appear "feature scope" what did I do wrong?
I want to do 'cut extrude' on 16:40 , but I don't have feature scope , why ?
check previous revolve body should be unmerge ,
thank you
Английский не знаю, но работа крутая!
i am have trouble with offset entites can you please help me.
sir, i need the plan of this wheel rim if you can send me to try
hello....i am ganesh....studying in germany...i would like to learn solidworks...how can i get software?....here in germany i cant download it from net...
even i want to make my project on simulation in solidsworks for automobile parts...
can you help me out please.
thanks in advance.
sir how to insert sketch behinD the planes.on solidworks
choose any one reference plan and put the distance and select front or back side this the general way of creating a plan,
the selected entity is not available for splitting not for trimming
4.20
Are there any ways to change SW2016 interface to 2014 version's ?
SW 2016 is better than SW 2014.
What is exactly "convert entities" used for?
Brings a line from a closed sketch into your active sketch.
Hi, when I want to do 'cut extrude' on 16:40 it gives me an error message: "The sketch contains an entity with unsuitable geometry" ??
at 13:30 we created a revolved body keep unmerge the body at 16:40 goto feature scope and choose selected body and select the revolve body which is created at 13:30,
Thank you on your reply, I will try that way.
Again I have the same problem :( I keep it unmerge and again the same error message. When I go to "Check sketch for feature..." than it shows the message: "The sketch contains an entity with unsuitable geometry. To try to fix the sketch right now, click OK."
and when I click OK : "Showing gaps smaler than: 0.27603... No problems found. "
???
@@Ahelot i literally have the same problem. has anyone solved it 3 years ago ? :D
Which version is this sir
Thank you for your explanation ☺️...but you speak very fast, try to explain little slow please 🙏
At 5:39 i am getting an error which says "Sketches used for revolve features should contain a single, notn-self-intersecting contour and either a single centerline or one that is currently selected". Can anyone help me with this??
Hi, I am little bit confused. In 13:18 you had single body and in 13:19 there are two bodies. How did you split it?
unclick the merge result option sir .
on 09:27 cant cut extrude - solidworks 2017
Hello Sir, can you done a chair in solidworks ? because i am in chair woodworking factory and if you want I can supply you a chair design to be done, so I will appreciate your help a lot. please let me know. Thanks
i will try to make a chair design soon.
CAD CAM TUTORIAL ok Sir, thanks very much
Why are there more than 7 pairs of spoke in my drawing? the drawing looks exactly your drawing in the video at 17:42. After 17:42, your drawing has 7 pairs of spoke.
#JaatVeerPro
New to solidworks and stuck around the 5:18 mark where we fully define the sketch. Keep getting an error saying "Fully Define Sketch is complete but the sketch is still under defined. To fully define the sketch, do one of the following...". Any help?
I have the same issue
I just defined it by myself
I’m facing issue during circular pattern, can you help me with that?
There are no ''feature scope'' in my SolidWorks. Help pls!!
Are you have drawing design? pls send to me
13:00
Hi could you send the copy of this file
my slw Extude cut feature scope missing
I followed the exact steps in the video won't let me fully define the sketch
go to display delete relation drop down the menu and select fully defined sketch click on calculate and done.
@@CADCAMTUTORIALBYMAHTABALAM Thanks
i dont have Feature scope what now??
whats up engineers 😉
Sir in my solidworks the colour appearance is not look like in yours look what I do
search on google : how to activate real graphic in solid works
Okay?
ступичная часть какая-то страшная, такое ощущение что ленивая версия построения диска
can make me someone a rim
Sir how can i Download Solid work crack Version?
Please one Video on Download and Install of Solid work crack Version
Please call it a wheel. You made the whole thing not just the outer "rim"
Somebody have that plane?
in front of the design the material is not complete. How to do this?
For Real view you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
in the video which you uploaded doesnt have these cards??
can u share 2d sketch?
i have Nvidia Quadro K1100 2GB card, give me two days i will upload 2D file in my Facebook page CAD CAM Tutorial,
OK TQ
Where is that BMW logo
Sound like karan johar
есть перевод на руский\ украинский?
my revolved base does not produce the image
make your geometry is closed not open at any point,
if your taking about realviews you need professional graphics card in your system like Nvidia Quadro series or AMD firepro Series. other cards will not support real views.
что вообще происходит на 17:47 минуте?? Как у вас удаляются перегородки между спицами?? Почему у вас 7 пар спиц, куда делись перегородки??
what's up with you audio !???
Ese diseño no es muy paramétrico eeeeh? Pillin ; That design is not parametrical enough ma niggi grr
Random use of commands. Automatic definition for each sketch. Nonsense spline. Subdivisions with approximate angles. If you want to work in 3d in this way, use Rhinoceros. Don't learn solidworks this way.
this is a joke
Fundamentally, nothing he did was wrong for he got exactly the end result he wanted.
"Geometry pattern fails" -_- when making the circular pattern cuts
Very long process and very complicated process. I will make it only in 5 minutes
Pff
Cant we get a normal english person and not somebody who is speaking as he has his tongue swallowed?