Solidworks tutorial | sketch jet Engine in Solidworks

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024

Комментарии • 231

  • @pacogascon4797
    @pacogascon4797 5 лет назад

    Fantásticos videos de Solid Works, da gusto seguirlos, te enganchan y disfrutas, viendo las maravillas que se pueden hacer con este programa gráfico 3D.

  • @ben.e__9
    @ben.e__9 7 лет назад +105

    These tutorials are excellent! I've learned more from you than I have from my University professors

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад +16

      Thanks.

    • @arslanekrem
      @arslanekrem 5 лет назад

      @@CADCAMTUTORIALBYMAHTABALAM thank you for this video which is prepared by you and that's very useful.
      I want to ask you something that is about your part's view because In my computer, parts aren't shine like your parts.
      Is this about computer's features or other adjustments?
      May you help me please.
      Regards

    • @lakshmana6261
      @lakshmana6261 5 лет назад +2

      @@arslanekrem you must activate real view graphics in order to view your parts like that

    • @missoumabdrazak2363
      @missoumabdrazak2363 2 года назад

  • @HeroTilt
    @HeroTilt 3 года назад

    i love it when he says "o k"

  • @eagamer9654
    @eagamer9654 7 лет назад +1

    Thanks

  • @shreyasjoshi7031
    @shreyasjoshi7031 2 года назад

    Sir how to bring that pen arrow?
    Is their any setting?

  • @蘇宸儀-w7y
    @蘇宸儀-w7y 7 лет назад +20

    These tutorials are so great!!! They help me a lot with my aircraft design project. Thank you very much!!

  • @3ddesign452
    @3ddesign452 7 лет назад +1

    Very good, look at my channel.

  • @chelluvinodh5165
    @chelluvinodh5165 4 года назад +2

    Hi its good tutorial.Can u please provide 2D drawing sheet of this jet engine

  • @shivadharmak9172
    @shivadharmak9172 6 лет назад +1

    Sir, my name is shivadharmaraju
    I am doing a project on jet engine turbine blade. But i haven't proper dimensions of turbine blade. Could you please send me that dimensions. That's very helpful to me. Please sir.

  • @zoranjankovic6629
    @zoranjankovic6629 3 года назад +1

    Can you show drawings of the parts of this aircraft engine? I want to do the same myself by looking at the drawings.

  • @learnerspoint2153
    @learnerspoint2153 2 месяца назад

    I am not able to rotate the propeller my assembly is ready but the propeller is not rotating sir please help???

  • @hasibuddin6823
    @hasibuddin6823 2 года назад

    Bro i cant find Thicken comand, i have 2021 solidworks in italian palese help me

  • @CoreySmith-ph3fj
    @CoreySmith-ph3fj 10 месяцев назад

    I'm removing all bridges and waters and high places asap

  • @dhruvsharma5673
    @dhruvsharma5673 3 года назад

    hello sir im not getting distance mate druing body and shaft assemble plz hlp

  • @rayaankhan8002
    @rayaankhan8002 4 года назад +1

    Which appearance you have used that it looks so glossy and reflective on the parts? please do let me know

  • @sameduzun8435
    @sameduzun8435 7 лет назад +5

    u the best I have ever seen.
    really many thanks.

  • @bangpandi7862
    @bangpandi7862 5 лет назад +1

    because I want to learn it
    thanks
    from:indonesia

  • @lucarutigliano6539
    @lucarutigliano6539 3 года назад +2

    This channel is amazing, i've just watched a couple of tutorials and i've already learnt a lot about solidworks. Thanks for helping all the engineering students out there, greetings from a future italian mechanical engineer

  • @simpernchong
    @simpernchong 3 года назад

    Nice tutorial. I am from Singapore.. nice to see Singapore Airline featured 😁

  • @yazzle26
    @yazzle26 4 года назад +2

    What benji said... I picked up more from you than what I ever did in my college course. Fantastic, thank you.

  • @ranjanmaharaj6556
    @ranjanmaharaj6556 7 лет назад +1

    Sir i have a question regarding the dimensions... How u r providing it ??? As i am trying with different dimension and having problm.... what should be the ratio.......???

  • @halservices
    @halservices 2 года назад

    Can u make tutorial for a ball thrower like for training robot

  • @Mindsoul2022
    @Mindsoul2022 6 лет назад +1

    Sir can you make videos on CATIA V5 as well, thank you.

  • @vinny659
    @vinny659 7 лет назад +1

    How come when you draw your solidworks parts all looks really shiny and real but mine looks dull and dark? What option to i have to turn on to have those effect?

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад

      you need professional graphics card in your system like Nvidia Quadro series or AMD firpro Series. other cards will not support real views.

  • @xl000
    @xl000 3 года назад

    Developing countries could use this and kickstart a whole new aerospace industry just from random tutorials on RUclips.
    Imagine if all the Yahoo boys in Western Africa were watching THIS instead of scamming people. Soon you would have a competitor to Boeing.

  • @chitownaa
    @chitownaa 4 года назад +1

    Revisited this Tut and used your tech to complete a project with split face,body and projected curves. You ROCK.

  • @derschutze7715
    @derschutze7715 2 года назад

    No Inside. Why. Diffucult or.

  • @DeniMurdiyanto
    @DeniMurdiyanto 7 лет назад +6

    woow... awesome

  • @SolidWorksTutorial1
    @SolidWorksTutorial1 7 лет назад +1

    I am also making SolidWorks Tutorials but I love to watch your videos, thanks Mehtab Bhai.

  • @ragheblahbazi166
    @ragheblahbazi166 7 лет назад +1

    thank you Sir FOR ALL the video but just one thing if you can show as the 2D sketch for each part before you designed if you can and thank you

  • @dhruvsharma5673
    @dhruvsharma5673 3 года назад

    how to change resolution of animated vedio

  • @MuhammedYalm-oy8px
    @MuhammedYalm-oy8px 4 месяца назад

    Bunun çizimlerini indirebiliriz

  • @brianwesonga8077
    @brianwesonga8077 7 лет назад +4

    this tutorial is amazing as i have been able to leaarn a lot of stuff from it

  • @srushti4583
    @srushti4583 Год назад

    Hi, I have followed all the steps exactly but I'm unable to do the final distance mate, please give me any solution.

  • @vivekdave7534
    @vivekdave7534 3 года назад

    This video is very useful and so nice explanation.
    Is it possible to make this in Onshpe??
    If possible then please make this in Onshpe and share video of it.

  • @pravinnaik946
    @pravinnaik946 7 лет назад +2

    Hey! I like your tutorial videos. Can you make a video of designing old vintage cars like those of 1930's ford models..

  • @mohammedbarqawi8113
    @mohammedbarqawi8113 7 лет назад +1

    Thank you very much, this was so helpful. thanks again

  • @mahmuthoppala6354
    @mahmuthoppala6354 7 лет назад +1

    How can i reach your solidworks picture settings or all your solidworks settings its look amazing

  • @manuboker1
    @manuboker1 Год назад

    Thanks! wonderful SOLIDWORKS instructing videos! 😎

  • @pbj7654
    @pbj7654 5 лет назад +1

    Your tutorials are awesome sir
    Could you please show us how you get the dimensions
    The design procedure
    That you just be great thanks

  • @ahnipun
    @ahnipun 6 лет назад

    it is really good for mechanical engr. can u tell me what's ur customization setting, that ur all 3D parts are looking Shine....please

  • @tomasashenafi882
    @tomasashenafi882 4 года назад

    How are the shaft and the housing connected? There seems to be an unexplained gap between the two. These things may be trivial to some of you out there but im losing my top over people skipping the basic stuff when making these videos.

  • @gman3841
    @gman3841 6 лет назад

    how do you exit at 2:40, if is under defined sketch, I cannot exit until is fully defined. How to solve this problem?

  • @akhilkalaga141
    @akhilkalaga141 6 лет назад

    What are the specifications of this model. Is it a commercial gas turbine used by companies or did you just randomly took some dimensions and drew it??

  • @sherifkotb565
    @sherifkotb565 6 лет назад

    Thanks a lot, but I feel like the vane of the turbine, is not moving or like irregular movement,
    is that cause of the high speed which make me feel like that ?
    or it's something wrong I did ?

  • @sahilpatel4346
    @sahilpatel4346 7 лет назад +1

    where can i get the assembly drawing of the jet engine. can you suggest me a link?

  • @mohammadakramhussain692
    @mohammadakramhussain692 3 года назад

    sir one doubt i have is if instead of circular cone the cone is in hexagonal shape then in that case how can we apply concentric mate as because there will be no circular surface or a face to select it will be plane edges then in that case what we should do ????????????????

  • @devenfaith9293
    @devenfaith9293 7 лет назад +1

    How do you get to the Thicken Command when your using SolidWorks 2016-2017

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад +1

      check in surfacing you will find thickness command.

    • @devenfaith9293
      @devenfaith9293 7 лет назад

      Thanks a lot! I have been using your tutorials for about a month now , and I feel like i'm becoming very proficient at using SolidWorks Thanks to you.. You go at a great pace.

  • @raghavendrachilakala7066
    @raghavendrachilakala7066 2 года назад

    Is this design fine to make for real-life application without having a High & low-pressure compressor & turbine at inside of the jet engine ?

  • @bhargavparmar4782
    @bhargavparmar4782 4 года назад

    Their comes problem some time to get basics commond like vertical,horizontal,tangent ,etc after the right click

  • @ShubhamPatel-zw1kj
    @ShubhamPatel-zw1kj 4 года назад

    Sir, when i did circular pattern all part become disappeared only one propeller appear , please help sir, i did exactly like you sir please help

  • @tanmaygaikwad4905
    @tanmaygaikwad4905 7 лет назад +1

    my rare fan isnt rotating!! only the front fan is rotating!! kindly guide

  • @rossfox6090
    @rossfox6090 7 лет назад +1

    Do you think you could make a tutorial for an aircraft wing? Something like a 787 wing.

  • @fredyguevara3304
    @fredyguevara3304 4 года назад +1

    Thank you for the teaching!!!
    Please don’t stop!
    Thank you

  • @muminkaya2366
    @muminkaya2366 4 года назад

    the thing that ı realized that you draw so easy inside of turbofan , but for a general mind that is right

  • @ARiSouNd
    @ARiSouNd 4 года назад

    boa tarde qual é a versão desse solidwork ..

  • @juansierra3914
    @juansierra3914 6 лет назад

    My question is: How can I obtein that color real that you always have on yours works of Solidworks. Really, I need to know how, because I like this color is very real, that's make to see the things more real. Please, tell me.

  • @Blazikan78
    @Blazikan78 11 месяцев назад

    Everytime i search something related to cad design i always land on this channel .. Best tutorials

  • @akshaybablu3985
    @akshaybablu3985 2 года назад

    Sir the propeller is not rotating

  • @madan6781
    @madan6781 7 лет назад +2

    Definitely is a good tutorial! Helped me on my homework from college. Thanks!!

  • @francescos7361
    @francescos7361 Год назад

    Thanks on mechanical engineering is interesting to create this and oceanography.

  • @p7n7c7h
    @p7n7c7h 6 лет назад

    What kind level program do you use(Solid Works has three levels and more options) and what is the cost for this program?

  • @sruscanga_
    @sruscanga_ 6 лет назад

    I have a 6gb RAM, 2 GHz AMD A8 Processor and AMD Radeon R5 Graphics. What version of Solidworks do you recommend me to run it decently? I alredy suscribed to your channel, excellent tutorial. Greetings from Mexico

  • @JordanAXJ
    @JordanAXJ 7 лет назад +1

    How you calculate what dimension you shall have in your sketch? Thank you

  • @arnoldli4051
    @arnoldli4051 Год назад

    Wonderful work. However, there is a question, how to input the exact size of the blade for subsequent processing? This is a very delicate part.

  • @radamenthe2136
    @radamenthe2136 4 года назад

    Thanks for your jet. Can we do à flow simulation with your jet or it s impossible ?

  • @who_is_blackman
    @who_is_blackman 11 месяцев назад

    the numbers are not being called out properly

  • @orujino5882
    @orujino5882 7 лет назад +1

    I want to split text on one side. How can I do this?

  • @venkateshpakalapati9424
    @venkateshpakalapati9424 7 лет назад +1

    can you show how to design a bird deflector system for a jet engine.

  • @papex9817
    @papex9817 7 лет назад +1

    I can´t make those 2 part of the turbine move :( what can i do ?

  • @gurrapupavankiran6917
    @gurrapupavankiran6917 6 лет назад

    excellent sir. can u show me how to generate the wing with skids for structural analysis

  • @CADTUTORIALmax
    @CADTUTORIALmax 2 года назад

    this video tutorial is excellent!

  • @pankajkatariya9473
    @pankajkatariya9473 4 года назад

    Hey while practising it there is an issue with circular pattern I'm not able to draw it

  • @sagarmotiwale.6158
    @sagarmotiwale.6158 Год назад

    Btw what is the appearance used for the blades?

  • @cyberneticwarmachine
    @cyberneticwarmachine 7 лет назад +2

    What are the specs of the used computer? everything works so smooth even in the other video's

    • @CADCAMTUTORIALBYMAHTABALAM
      @CADCAMTUTORIALBYMAHTABALAM  7 лет назад +3

      Dell Precision M4800
      Processor : Intel(R) Core(TM) i7-4810MQ up to 3.6 GHz
      RAM : 16 GB
      HDD : 500 SSHD
      Graphics : Nvidia Quadro K1100 2GB

    • @sanjaysingh282195
      @sanjaysingh282195 7 лет назад

      LOL!! WHAT ABT THE PRIZE OF WHOLE SYSTEM IN RS...

  • @muhammedmegapol1559
    @muhammedmegapol1559 7 лет назад +1

    thank you

  • @pavankiran8929
    @pavankiran8929 6 лет назад

    its awesome sir but how to download/copy that animation video from solidworks
    to keep in our ppt

  • @YashTechnicalSCT
    @YashTechnicalSCT 4 года назад

    can i get source file of this jet ?

  • @aleceiermann9358
    @aleceiermann9358 6 лет назад

    Please get someone else’s voice to talk over, you voice isn’t appealing to my whole class!!! Like please we have to play the video without sound because of you😕

    • @MrVibes-tj3ie
      @MrVibes-tj3ie 5 лет назад

      Yikes bro, maybe you should care less about his voice, and more about what he's teaching.

  • @kingdavidyt3961
    @kingdavidyt3961 4 года назад

    You are the best bruh..
    Your tutorials helped me got A- in CAD🙏🙏🙏

  • @Varon153
    @Varon153 7 лет назад +1

    Thanks a lot for the tutorial.. Can you design a power steering system ?

  • @yuvrajsinghnegi2109
    @yuvrajsinghnegi2109 4 года назад

    Which website you find drawings with dimensions ?

  • @ValueBullInvestor
    @ValueBullInvestor 7 лет назад

    Your videos are awesome! I need your help! At 2:37 I created the spline above the plane as you have but when I exit the sketch my spline doesn't go onto the my plane 1. It is sitting above the plane. I did this also for my plane two. Both of my splines are off the planes. Why? and How can I fix this problem? Thanks!

  • @Sophia-bd9lr
    @Sophia-bd9lr 7 лет назад +1

    thank u

  • @maherfalah01
    @maherfalah01 6 лет назад +1

    good

  • @urieltello5548
    @urieltello5548 6 лет назад +1

    thank you so much

  • @MVDHR
    @MVDHR 4 года назад

    What version of software you are using?

  • @karamhasanat4487
    @karamhasanat4487 4 года назад

    Thank you very much
    I just did it

  • @shoebnizami
    @shoebnizami 6 лет назад

    unable to convert entites while drawing pattern on the front plane. can you please show how to do that

  • @skynetitisnecessarytokillj5343
    @skynetitisnecessarytokillj5343 6 лет назад +2

    Cool work bro, I Like it!.

  • @aleceiermann9358
    @aleceiermann9358 6 лет назад

    Stop leaving adds on your school videos

  • @tahirshaukatshaukat4829
    @tahirshaukatshaukat4829 5 лет назад

    Great (thanks). One question, Text "Singapore" also goes to other side of housing in wrong direction. If we rotate 180 deg, Singapore is written back-word, what to do?

  • @jacobwolwowicz9857
    @jacobwolwowicz9857 7 лет назад +1

    how many parts is this engine?

  • @carmenceciliaquinteroherna9553
    @carmenceciliaquinteroherna9553 6 лет назад

    If I could give you 1000 likes, I would. You are by far a better teacher than my teachers from my College. Thanks for your videos. I have learned a lot.

  • @popsjourney7164
    @popsjourney7164 3 года назад

    what is the appearance you have choose?

  • @mukeshkumarcap4139
    @mukeshkumarcap4139 2 года назад

    Diagram please

  • @pixelatedpotter
    @pixelatedpotter 5 лет назад

    Can u send me the different cad drawings, just for comparison with my cad files

  • @joelcastaneda6560
    @joelcastaneda6560 3 года назад

    Thank you for making all the videos. I just finished building my first solid works turbine.

  • @marcinszostak575
    @marcinszostak575 5 лет назад

    Could you show how to modeling winglets with wing 737-800 NG for example.
    P.S. Excellent videos :)

  • @baljindersinghsidhu3830
    @baljindersinghsidhu3830 6 лет назад

    this is really very helpful sir.. u r amazing.... Kahi coaching jaane ki zarurat nai h bs aapki video dekhte rahe banda... thanks sir..