Thank you so much. I learned a lot of new things, you have repainted lessons, everything is very clear. I don’t know the language, I understand a little, I like when you voice the numbers, I began to understand them slowly.
This is a great video and you consistently put out great content. My only comment is that the hole through the piston should be rotated 90 degrees from the cutout at the bottom of the piston, since the cutout is there to prevent the connecting rod from touching the sides of the piston.
Please its my humble request that provide 2D diagrams for all the parts. It will be really helpful for us to design so that we can test ourselves. Thank you.
Your video is really beautiful, but if you share the technical drawing photos or pdfs of the parts drawn in the video, it would be really nice. Thank you.
Hello sir. I need your help. On minute 39, I cannot extruded and it shows “the sketch has intersecting contours”. I follow every instructions. Please help me sir
This is not an engine.. You can not make this nor make it work in anyway. No effort or thought has been put into the actual "Design" of this "engine" design. This is just a beginners modeling example. The fact that these models resemble an engine is irrelevant to what you're trying to conveying to new SW users.
Good lord people, its a beginner SW tutorial. It's not supposed to reach production and he never said it could. Nor did he say that he is a car mechanic. The video is supposed to teach people how SW works, not how engines function...
Thank you so much. I learned a lot of new things, you have repainted lessons, everything is very clear. I don’t know the language, I understand a little, I like when you voice the numbers, I began to understand them slowly.
This is a great video and you consistently put out great content. My only comment is that the hole through the piston should be rotated 90 degrees from the cutout at the bottom of the piston, since the cutout is there to prevent the connecting rod from touching the sides of the piston.
you are the best tutor so far on solidworks
thank you . you are the best solidworks teacher in the world
Please its my humble request that provide 2D diagrams for all the parts. It will be really helpful for us to design so that we can test ourselves. Thank you.
Yess
Yes
Sir can u upload the design characteristics of the parts like soft copy and figures so we can practice on our own...
Just make a rough sketch with the dimensions, then try on your own
Flawless teaching and explanation also is step by step so never felt like I was using some new software. Thanks alot sir !!! Got to learn alot.
Wow sir i just followed your steps..thanks alot😊
That moment when he says "See". Good tutorial btw!
Yes 😁😁
Thank you for sharing your knowledge.
thanks a million, please keep sharing.
Thanks man, but I copied the mate for 2nd and 3rd cylinder instead of mating again and it still works :) kudos
Very nice video, thank you. This was very helpful! Now I will make a V12 :D
thanks!!!!!
perfect teaching and designing!!!!
Thank you sir.. this video helped a lot!!
Good job sir🔥🔥
Assembly Finished Bhai❤
Thanks
thanks to all supporters
Thank you so much man!
기계원리가 대단하십니다
17:50 mirror cutout
Superb model
Amazing design sir!!!!!!!
Thanks man.
good tutorial👍
Nice video
Thank you!
You can make a copy of whole connecting rod assembly and use it for the other 3 slots, I am sure it will work, But hey thanks, it was good rendition,
Hi Sir.
It was well helpful for me to get an idea of assembly and motion steady.Can you please create a belt curve conveyor and motion steady?
Thanks bro !! that was so good ! keep it up
Nice one.. Good
Your video is really beautiful, but if you share the technical drawing photos or pdfs of the parts drawn in the video, it would be really nice. Thank you.
Thank you sir
Can you make a video about engine parts construction and calculation?
Sir can you make a video of an Engine block that covers FEA Analysis?
Perfect, thank you
thank you , that's perfect
Sir i used copy with mates at crankshaft postion 2 and 3 the results were still the same, can you expalin the concept of why you didint used
Thnk u sir
please make a video on carburetor parts
can you do a video on how to select planes for skecting i get too much confused
thx man
nice
Sir add some orthographic drawing with dimensions ,it would better to understand
EXCELLENT
Thanks for the tutorial. I would like to ask you if you have the worksheets for this project
I am a creo user , can you do crank balancing in solid works ? If interested please let me know
Sofware downloading link......... It will be more helpful. For the beginners
Yeah even I need that
@@tejaswini.m2022 use getintopc
Super
Muito legal, Show!!!
Very good! ;-)
Hod much assembly have this motor?
please make video on realastic graphics😄
🔥🔥🔥🔥🔥
Sir drop some drwaing for assembly and parts on your next video
Bro indeed the sketch where did you get this
can someone explain me why the crankshaft was created in right plane
It doesn't matter. The important things is must be useful whole assembly
Sir please provide drawing also it help us to practice🙏🙏🙏
Can you plz share the link to sketches
Hello sir. I need your help. On minute 39, I cannot extruded and it shows “the sketch has intersecting contours”. I follow every instructions. Please help me sir
can you share us with sketch diamentions
excellent contribution friend, where do you get the plans? any internet page?
Superb..
Hi. Can anybody tell me how to show those icons next to Instant2D (i.e. normal to, isometric, dimetric and trimetric)
HI SIR CAN I GET THE MEASUREMENTS PDF OF THIS PROJECT PLEASE SIR
can u pls tell me material and appearance of the part ?
Sir plz can you provide solidworks files of this particular project
RUclips really gotta cool it on the double ads smh
Where can i contact you? i have a question for a specific video you had uploaded, but i cant seem to find it now.
Hi Sir, Do you have anything with at least 20+ parts?
Where do you take sizes for parts?
Why upper block dimension is mistak
Sir... Exercise book kaha milegi... Name of the Exercise Books... Pls sir...
Provide detailed drawings
Will you give me this design blueprint drawing?????
Pls share the 2d diagram of this video
Can you provide a report and ppt of this
Can you share to dimensions for us?
how many parts is this all in all?
Hi what is "keep and condition" ???? the phrase that you are keep repeating
can you send this via solid works
Where is piston crown
you missed piston rings
Hi sir, Can you send me a picture so I can draw it?
👍🏻👍🏻👍🏻👍🏻👍🏻🌺
What kind of engine is this? Name of engine?
Akhil Valupadasu Inline 4-cylinder engine
آموزش سالیدورک از صفر تا صد لطفا به پیج ما سر بزنید
can anyone send me this whole engine in .sldprt format?
do you still want it?
@@alimahmud8115 nah bro, I passed the subject
👊🏽
31.57
too many ads
28.30
This is not an engine.. You can not make this nor make it work in anyway. No effort or thought has been put into the actual "Design" of this "engine" design. This is just a beginners modeling example. The fact that these models resemble an engine is irrelevant to what you're trying to conveying to new SW users.
true that! what he's calling the Cam, is actually the crankshaft counterweight! It lacks the flywheel as well
Good lord people, its a beginner SW tutorial. It's not supposed to reach production and he never said it could. Nor did he say that he is a car mechanic. The video is supposed to teach people how SW works, not how engines function...
Why there is no cooling system?
how many parts is this all in all?
how many parts is this all in all?