SolidWorks Tutorial
HTML-код
- Опубликовано: 26 авг 2016
- sw-tc.net/215 SolidWorks Tutorial
►Website: www.SW-TC.net
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.com/u/0/b/1027607...
■Donation :► www.paypal.com/cgi-bin/webscr...
made a trophy with a base of such design years ago in a D&T class, didn't think of making it into a chair though. love the idea!
Very interesting and helpful.
I learn so much things about spline.
Thank you for your work sir.
Thank you. It is very challenging, I am expecting more video like this.
Beatiful! I love it! I'll try to do it for me!
nice work sir
help full video
thanks
Thank you very much for the tutorial. I've got a question for some reason i couldn't hide the crack can anyone help please. Thank you
Which colour combination have you used? I tried through all gloss paints but couldn't get the one like yours.
How you calculate these points. With help of the stl file or something extra
Hi. Where from do you find point coordinates? Which of the program helped in this?
in Project Curve : when i select the 2 sketches the exy curve don't follow the out sketch 2 until the bottom and sketch 3 is still visible
When you thicken the whole model, you need to cut some excess material from the bottom of the chair, because otherwise the chair wouldn't sit flat on the floor. Also the filleting needs some work as mentioned in previous comments.
hey. could you make a video about how to design a gear reducer box
Why did your initial surface loft fail, due to the 3D sketch as guide curve? What was wrong with how you did it the first time? Thanks!
where can i find 2D drawing file ....thx
Tutorials without verbal explanation are hell to follow. Like watching a PCB operate.
i like this
How does one thicken this? I want to print a mini version of it but SW won’t let me thicken it because it looks messy.
I'm unable to create the last fillet, with the same problem Gate Nk described (I'm using SW2017). I rebuilt it twice from scratch with a few minor tweaks the second time, and had the same problem. Appreciate the tutorials immensely, but this is a key surfacing problem I'm unable to solve with this tutorial. I'll try some others and come back to it.
Did you figure it out by now? I disabled sketches from view. It helped for selecting the edge, but I still failed to do it
i can't make the fillet before the thicken, help please :(
Hi, for fillet section: it appears the error "Curve cannot be used as fillet edges" whenever I choose the Curve2. Please help meeeeeeee!
You can use the select other tool to select an edge associated with that curve
Hi I have the same issue, did you able to figure it out.? if yes can you please help me?
معلم
For some reason, SW won't let me perform the very last fillet telling me The radius of the fillet being too large to fit surrounding geometry... And when I lower the values to 1mm, it just outright fails to create the fillet and suggests using face fillet instead =/
Same here, variable fillet isn't working. I was about to write the same comment, thanks Gate Nk!
Make sure to hide all of the curves/sketches so you can click on the edge
I actually had to rework some of the sketches to leave more of a gap between the two outermost curve. So my chair is ever so slightly wider, but I was then able to apply the variable fillet. And I got a pretty nice render out of it to boot: imgur.com/a/YOnWW ! Cheers
I also have the same problem. Tried everything
Change the order of the sketches and curves on the profile selection in surface loft command then fillet will be done.
what is this product?
Can you Do a human skull tutorial please?
that's to complex
Modeling a skull with NURBS is quite easy by simply point editing a single 4-sided patch or half sphere.
AutomotiveCNC Thanks do you have any tutorials like that?
No, I haven't recorded such a tutorial, because point editing is pretty much time consuming and usually takes hours to make a complex organic shape like skulls etc.
AutomotiveCNC got you. Have try making an MRI scan into 3D? That's one way I know how to model a skull. It's not an actual model but and the end you have a skull to print.
can i download the file somewhere ?
How to do if the curve will not touch at bottom? video at 11:19
same thing here
i cant do the fillet at 23:51. Help me pls!!
hide all the sketches/project curves
@@emmanuelirbin5640 Thanks
Thank you@@emmanuelirbin5640
where do you get the coordinates for the points, and the length and angles for splines? without the explanation of these things, this video is almost useless
Hlo
hello sir / madam
how to make part drowning document of surfacing part
It needs a voice over
TBH it doesn't look really advanced. Just several sweeps operator and a few fillets here und there
Imagine that the Panton chair was designed before CAD was a thing. 😂