SolidWorks Tutorial
HTML-код
- Опубликовано: 14 окт 2016
- sw-tc.net/#236 SolidWorks Tutorial juicer, , after 2 failed cut by (project curve & split line) "spline on surface" fixed this issue,(used for first time in this channel). So thanks are going to "GymB Gamer" for suggesting this tutorial!!
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►Facebook: / solidworks.tutorial.page
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine Project :► • Project 10: V6 Engine
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Tutorials: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Weldment Tutorials:► • Playlist
►Available Playlists : ► / @sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
►MAGMA "Casting":► • 9- MAGMA 5.2 Tutorial:...
►MATLAB:► • 1- MATLAB TUTORIAL for...
►Electronics & Arduino :► / @electronics-tutorial
■Facebook 2support:► / solidworks.tutorial.page
■Google+ 2add:► plus.google.com/u/0/b/1027607...
■Donation :► www.paypal.com/cgi-bin/webscr...
I have always known you to be so exact and neat with all your work. Always knew you would just get better . Your excellent at what you do.
This is perfect. It introduces advanced concepts using a basic item.
Très bien fait, la partie complexe est super bien réalisé !! merci pour ce partage
I was waiting for you to shell the center out, but great tutorial!
Yeah, me too...
Love it .. good teachig n work. How do you get the hdri material shader ?
thank you ,
please ...
why the centerline used in sketch 3 ????
and why used 2 coincident with line8scetch3 & line9@scetch3 together with (3D sketch 2) and same with (3Dscetch3)
one coincident not enough ??
thanks a lot
Learning a lot with you guys! Keep the good work! Thanks!
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ruclips.net/video/l45lRQ2wIF8/видео.html
Thank you so much for the help! I designed it in Solidworks and 3D printed in Cura as well!
thank you man your inspiration and I hope it is helping people over the world .
be bressed
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ruclips.net/video/l45lRQ2wIF8/видео.html
Nice product modeling CAD demo. Thanks.
hii, thanks for the video, i'd like to know what software you use to record the screen.
Um excelente vídeo!!!🎊🎊🎊 Parabéns... ótima apresentação e ensinamento - hehe.♥♥♥
I wonder if it is possible to go from the model to guessing the features applied to get the same geometry.
THNX FOR LOFT CUT UNDESTANDING
Thats great one, loved it. lot of like
how do you get your solid works to make colors and objects so realistic? I have maximized my settings in options, but my objects don't look anything like they're made with real materials.
Fácil y rápido, muy clara la forma como explicas :)
It could have been nice with the good video to reply to questions being asked over here!
for instance, I would like to know how do you decide / know what are the right measures and the correct angle?
Thank you.
When you have ideas or are trying to replicate something that doesn't have measurements, usually you can make your own. Its what I do when modeling something lacking proper dimensions. Its trial and error. In the workplace dimensions will be given
I loved it!
Hi, can you give me the settings in which the part modelling is done? I want to get the environment reflected to the part and look good as you have, much appreciated.
You have to use RealView
To use this option you must have a "Pro" graphics card
I want to know what course u did to be able to do all things. Pls help. Thank u.
Does anyone know how to hollow the cone apart from using combine? I tried splitting in two bodies and then shell with down to 0.5mm thickness and could not get it to work. This video is amazing.
this video was very helpful 👌😊 next just think and make other design 🤗
best regards from Berlin
Nice video, can you tell me how did you learn SOLIDWORKS so well ?
I can not put the pieces in that brightness. What should I do?
This is great! your really good! just one question, when you made the dips for the juicer structure why did you add the 15x20 square? what benefit did it have? thanks!
I assume to allign the cuts for the surface?
The drawing is missing, you finish off with emptying the materials from the juicer, since in all the juicers, the center is empty so you add the bottom part effectively and to save materials
What are you doing with the two splines at 11:44 seconds? Are you setting them equal? Tangent?
Bravo. Thank you.
How can we use lofted cut in Siemens nx 11
I was stuck @14:47 FOREVER! until I realized that I needed to double click the sketch profiles in order to select them. Deleted and restarted the 3d sketches looking for possible errors before I realized what was happening.
When you hover over an item in the feature manager appear blue arrows. How it is implemented?
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ruclips.net/video/l45lRQ2wIF8/видео.html
Cannot loft cut completely with one operation. Get error message "has no contour geometry". I have to do it separately. (loft cut twice) One for upper part and one for lower part of the profile. Anyone knows why?
no sorry
very good
The thing is this can be done easily in some other way..but this video will teach you how to DRAW ovevsurfaces and with atmost PRECISION
I am trying to replicate the process in Inventor, does anyone know how to align points from the 3d sketch with the points from the 2d sketch as in 5:38?
hi, did you manage to do shapes in the middle?? please message me, if you did.THANKS
@@tonda215654 no not yet... I will be looking at this again after Christmas though! I will come back to you if I find out
Thank you for shiring is good
Thanks for uploading this.
Has anyone had an issue with the lofted cut at 14:20, specifically with the points on sketches 6 & 7 at 13:20 & 13:42? When I attempt the lofted cut, I receive this error message: "sketch 6 (or sketch 7) has no contour geometry". I have redrawn all curves and points, but I keep getting the same error.
Any help would be appreciated.
Thanks in advance and for uploading this tutorial!
You are selecting the sketches in the wrong order
Please check my Solid works Tutorial Videos
ruclips.net/channel/UCIozxXWfBmKWo_C1dbGiwGw?view_as=subscriber
wonder if it can be modelled in autocad. Try it and post the link
cherry on the top would be use flex to add a mild twist to the juicer section/.
How do you make the objects this shiny? My constructions seem sort of bland, is it a version of Solidworks or a specific option?
Graphic card with support Open GL
@@RonAdamsky thank you, my man, fortunately I've been able to enable it in my SolidWorks, thanks for the help, though
Nice
when i try to dimention my spline like 11:00 i get a warning "Please Select a planar face" and it doesn't let me dimention it; can someone help me with this?
pull the dimension out of the sketch in the white background
Dear how to download solid edge ?
Harika çizimleriniz var ve siz mükemmelsiz :)
I want the download SolidWorks but I can't
I like render version. for my products, i need photoview 360 right ?
To see Full portfolio on behance:
www.behance.net/Altohamy
This is my showcase of Year 2018.
ruclips.net/video/l45lRQ2wIF8/видео.html
Mantappppp👌👍
i am content for this video i t is terrific
please show how to add colour to the product ! i could'nt follow your process ! even after several times !
i can't search on SolidWorks!!?
sweet
I want to know what type of computer do you have. I have a pc whit core i7 n 16gb ram but you pc is hard core lol.
Misael Zapata perforación de tubo cuadrado
use SSD instead of normal HDD.
there are like dozens of core I7, one of them is great, most are trash. SSD and more ram would help, a decent graphics card to to alleviate the video processing from the cpu
ruclips.net/video/t0CNG_vSE5U/видео.html Watch my first CAD video. I have posted PC description in Video text.
wasn't you able to mirror that line at 11:21 ?
Plese give me mobile number
Very poor choice for the final render view 😂 other than that, pretty good job.
Coucou. Le gros like de soutien posé. Bonne journée à toi.
This tutorial will be so much great if you add Music (free license).
Nice hat 😁
Ai có thể giải thích chỗ 75 và 65 cho tôi hiểu dk ko?
it can be done in a much simpler way
17:52 i see what u did there
hahaha we all see it
@@dianaazeneth I did not at first
no sound sorry
Es recomendable que la persona que realiza los videos hable o ponga música de fondo, muchas veces sus instrucciones no son claras, mueve mucho el cursor y confunde a quien esta viendo su tutorial.
Why is person drawing not talking because it's to be tutoring mos
Dear, please show your e-mailbox to us, ok?
would be better if just spoke a little
So comercial is borred
like si t'as pas envie d'aller en cours lundi :/
grave aha xD
I just think you've gotten too complicated in the construction !!!
Do you have any way to construction faster?
Real. It was painful to watch
this is great tutorial, but SW is most terrible software without user friendly layout
Dear how to download solid edge ?