Thank you very much, i just upgraded this part as You adviced.... hope for next upgrades for Hornet as it is may first 3d Printer and i'm new in the hobby :)
I have the problem that my artillery hornet fails to boot. The display lights up when I turn it on but fails to show any information or boot up screen... u/shalokshalom has a video on reddit with the exact same issues that I have.
Im not worried about the plastic gear, the hob gear is metal, its just pressed into the plastic driver gear. The bearings that it runs on can get worn out fast by having the screw through it as those bearings are not designed for lateral loads.
Yep pretty much the same process on the Genius Pro. The extruder cover is just a fan and heatsink. Are you wanting a video about leveling the Hornet or the Genius Pro?
@@EtherealProject3D prints that uses the sides on the bed. Every time I level the bed and then tries to print on the sides it’s way too high or way too close to the bed. Any solutions?
It depends on what country you are from, If you have amazon that is the best way to find them. The screw will wear the bearing and cause the extruder to bind.
@@EtherealProject3D ahí lo encontré en aliexpress sale 1.76 USD y el envío 0.70 USD por si lo quieren comprar. Lo busqué con el buscador de aliexpress de fotos.
Hi, very nice video, I love this upgrade! Is it possible also to swap the hotend in order to print more complex filament like carbon fiber pla or composite materials that requires higher temperature or it's a software or other types of hardware limitation?
The heat brake can be replaced to allow for higher temps for sure and a simple firmware update would follow. Overall pretty easy mod on this machine, ive done one, still need to do mine, I have video plans for it.
@@EtherealProject3D Thank you very much for the quick answer! Hope that this video will came soon🤞 For now I'll have to wait because I've tried but only with failure!
![Artillery Hornet - Primer calibrado - Episodio 02 [En español]](/img/1.gif)
I've already done this, but I wish this had been available when I replaced mine. This will definitely help others and you explain it very well!
Thank you very much. I am sorry I didnt have this out sooner for you.
I JUST SPENT 4 HOURS TRYNA FIGURE OUT WHY MY PRINTER WOULDNT EXTRUDE AFTER I SWITCHED THE IDLER ARM TYSM I HAD THE TENSION KNOB ATTACHED THE WRONG WAY
This is a great addition to the Hornet. Fully recommended. Thanks for the vid.
Literally just before you said "I'm such a nerd" I said to myself, "Man he's such a nerd."
Own it.
Haha yeah i cant help it.
Thank you very much, i just upgraded this part as You adviced.... hope for next upgrades for Hornet as it is may first 3d Printer and i'm new in the hobby :)
Awesome! Its a great first printer to have.
Excellent !! very very good super detailed video!! thanks for uploading it and it is an update that yes or if I have to do it! Thank you!!!
You are very welcome. Thank you
I've stripped my tensioner screw. Is there a metal replacement available?
@@thqp I have made my own in the past, if you would be interested we can figure something out.
The quest didn't finish for me, I think its bugged. Might wanna take a look at it. 😝
Sounds like you need to step up your quest game ;)
Thank you! 🫡
I have the problem that my artillery hornet fails to boot. The display lights up when I turn it on but fails to show any information or boot up screen... u/shalokshalom has a video on reddit with the exact same issues that I have.
I have not run into this issue before, there could be a problem with the screen or the mainboard connection to it.
Ho un problema sull'asse x, non mi fa muovere la testina. Il perno del motore si muove, mentre la cinghia non si muove. Puoi aiutarmi?
The plastic hobbed gear is now a concern. What do you think?
Im not worried about the plastic gear, the hob gear is metal, its just pressed into the plastic driver gear. The bearings that it runs on can get worn out fast by having the screw through it as those bearings are not designed for lateral loads.
Can I do the same thing on my genius pro!?
Please do a video of bed leveling and give us beginners best tips and tricks to level the bed
Yep pretty much the same process on the Genius Pro. The extruder cover is just a fan and heatsink. Are you wanting a video about leveling the Hornet or the Genius Pro?
@@EtherealProject3D leveling the genius PRO thats what Im asking for.
I have a big problem with that please help me
@@mamlvagensinan6832 what part are you having trouble with?
@@EtherealProject3D prints that uses the sides on the bed. Every time I level the bed and then tries to print on the sides it’s way too high or way too close to the bed. Any solutions?
@@EtherealProject3D troubling only with the first layer
What do You think about knurled U shape bearing, I see it's available as an upgrade?
Ive not see that before.
Good video. Thanks.
You are very welcome.
Dónde puedo encontrar esa actualización o como se busca ?? Y el tornillo que falta que función cumpliría con el y sin el ???
It depends on what country you are from, If you have amazon that is the best way to find them. The screw will wear the bearing and cause the extruder to bind.
@@EtherealProject3D ahí lo encontré en aliexpress sale 1.76 USD y el envío 0.70 USD por si lo quieren comprar. Lo busqué con el buscador de aliexpress de fotos.
3dinsumos en argentina capo, busca "titan" y aparece
Bonjour, Pas besoin d’installer la visse?? Qui a le roulement ? Avez-vous un print pour
Nope, that screw does more harm than good. I found the bearing on amazon.
Hi, very nice video, I love this upgrade!
Is it possible also to swap the hotend in order to print more complex filament like carbon fiber pla or composite materials that requires higher temperature or it's a software or other types of hardware limitation?
The heat brake can be replaced to allow for higher temps for sure and a simple firmware update would follow. Overall pretty easy mod on this machine, ive done one, still need to do mine, I have video plans for it.
@@EtherealProject3D Thank you very much for the quick answer! Hope that this video will came soon🤞
For now I'll have to wait because I've tried but only with failure!
@@EtherealProject3D is this upgrade project done? I love to see it...