Artillery Hornet - Marlin 2.1.2 - Input shaper + Linear advance
HTML-код
- Опубликовано: 5 сен 2024
- In this video I show you how to upgrade the firmware on the Artillery Hornet, and how to tune Input shaper.
Links:
My Github with the Marlin 2.1.2 firmware.
github.com/Riv...
Marlin firmware M593 documentation
marlinfw.org/d...
Printrun download
github.com/kli...
STM cube tool
www.st.com/en/...
My Discord:
/ discord
The firmware.bin file was missing. It has been added to my GitHub.
"Your printer's firmware supports host action commands, but they are disabled. The firmware will not inform OctoPrint about job pause & cancellations, filament runouts, and similar firmware-side events. If you want this functionality, you need to change your firmware's configuration"
Firmware is not compiled ok.
I oppened and issue on Github.
@@cosmefulanito5933 i will have to look in to that. I am not an expert. If you know how to do this, please join my discord.
Amazing! I was able to upgrade my Artillery Hornet following your tutorial, despite being a little bit more noisy and the movement of the axis is quite slower, it prints almost flawlessly. Thank you so much for sharing!
Youre welcome. 😁
This is Cool bro. Will try marlin 2.1.2 soon. Thanks for sharing 💕
Good looking results, the quality seemed to improve a lot.
Thank you. 😁
Hello, can you share a pre-compiled firmware that supports BLtouch/3DTouch? I'm unable to compile it myself. Thank you.
Hi. If you have possibility to join my discord server it will be easier to help you.
my hornet does not accept M997 command. When i send it the printer screen goes black and disconnect from pronterface... Any idea?
This is normal.
same here, comunication is dead
ay alguna posibilidad de activar la recuperacion de una impresion cuando se va la luz? :c
I have tried, but i was not able to. Im not an expert. 😬
any support for bl touch ? I want to install and to try installing Artillery's BLtouch
If you join my discord i have shared firmware with bl touch there.
@@3D_printer_guy thanks man ! unfortunatly i am probably migrating to klipper
Nice 👍😊
Thank you 😁
My object cooler fans became very noisy after the upgrade. It is not a mechanical noise, they are in good shape and just before the upgrade they were very quiet. It is electrical noise and I think it come from the motherboard. On different speed the sound has different frequency. It is very annoying. Can you tell me any solution? Thank you
This is weird. Can you join my discord server? It is easier to troubleshoot there.
@@3D_printer_guy ok
How do you calibrate linear advance in this printer? Thanks
I sliced a square Tower and raised the Linear advance as it printed. If you join my discord i can help you more.
What happens if the programing fails? Gets soft bricked?
I am actually not sure. If you need more information or help please join my discord channel. Link is in the discription.
help please, verification failed and my printer dont turn on, just black screen, usb port com doesnt open to reflash :(
If you join my discord i may be able to help. Someone had this problem with the latest version of the flashing software.
@@3D_printer_guy I just fix it bro :D thanks your video help me a lot, I will join ur discord, I just has to Erase all Memori before flash firmware.
PD: I had to do a jumper to enter in DFU mode
Is BL Touch activated in your firmware?
No. Sorry. Please join my discord for more help.
🎉
level corner dissappear????
It should still be there. I made a shorts video how to calibrate.
so, if i add your bin to an sdcard its done?
I'm afraid it is more than that. You need to do what i show you in the video.
@@3D_printer_guy no worries, i will do it like you showed
@@3D_printer_guy how fast and what accels are you using?
I am printing at 800 acceleration. 60-80mm/s speed. If you dont upgrade the cooling fans you will run out of cooling anyway.
something is wrong with your compilation of marlin firmware. printer is working very loud. in marlin 2.0.7 hornet without that noise.
That is weird. Have you tried turning off input shaper? If you join my discord it is easier to help.
In the official artillery flashing guide there is written to use .hex file, will the flashing succed when using .bin file?
I flashed mine with the bin file, so it should be fine.
I forgot to ask, are the all security settings set as they should?@@3D_printer_guy
@@realdude9149 if you are thinking about the thermal runaway and such, yes it is activated.
Thanks for help, im gonna flash my printer.
I noticed that a printer is louder now, is this because of input shaping?@@3D_printer_guy
pio folder missing
I uploaded the file in a seperate folder on github
OK thank you
.pio folder is missing
I uploaded the file in a seperate folder on github
instale el firmware y todo ok, salvo que el autohome mueve mas lento
hola que mejoras notaste en la impresiones?
@@JonatanMino-tn7ez un poco mejor las terminaciones
porque las configuraciones son de ender, como dijo en el video.
Man sabes que programas usa unos es el front el otro cual es ?
perfil para cura?
I dont have a specific profile for Cura. Just select an ender 3 and tune retraction. Without linear advance i had it set to 4-5mm. With linear advance i have retraction set to about 2mm.