Cruising through youtube researching droop setups and came across your channel. Very first thought was oh damn its wolftick! Enjoy your bike videos, and also enjoyed this one. Subscribed
I have a question! 😊 Just about to order some of these for my Acme Racing Bullet 1/10th buggy restoration. My stock shocks measure 90mm from mounting hole to mounting hole centres when fully extended. Do the sizes quoted on the ad relate accurately to this dimension or is it total length of shock?🤔 Cheers
The disc is actually large enough to reach the shock walls. You're comparing the sizes at the very top where the body screws into, once past the thread the disc is actually flush and has minimal slop. They ain't lizards but they're fine on a budget and with thick oil.
@@arkansasrcnewbie Yha! But I was a little disappointed with the clearance it has on the piston and doesn't let it have a smooth job. See how it goes in the Tests!
I have those same shocks on my brazin scale atl trx4 build but i used the 90mm with losi mini t springs and 60wt oil and they are nice and smooth for a cheap shock.
They have different bodies....i buy 110mm and 90mm, take the shaft of the 90, put in the 110...and lso take the 90mm sprungs....running same lcg chassis in 2 cars, with this shoks, i run it with 20wt....they are awesome
I think they are just a cheap internal spring shock. Not really like desert lizards which are super smooth & designed to be sprung or drooped or in between imo
How well do you think those shocks would be for a upgrade for a Redcat gen7 my little brother is looking for a cheap set to upgrade his, the ones he has doesn’t seem to really flex or droop if you pick up a corner the other side stay a right where it is
Man I'd give it a shot, I have the gen 7 myself and I could see running these. But have your brother watch the video we're I cut the shafts and relocated the links...Ot really helped with flex and was all free. It should do the trick, if not turn him on to these. Don't Kristen to these trolls.
Hey there my friend! I do like those Injora shocks bud! I’ve got a few sets of them with the springs on the outside and I love them. Not sure what to think about that smaller round flap wheel with the holes in them. The ride will tell right!? Like your “mail call” section of the video dude. You got some awesome stuff. I don’t have the individual weights for my RGT, but I’ve got weighted or heavy metal wheels which haven’t given me any issues yet except for loosening and falling off once. Love the gold wheels brother, those are wicked dude! Great video brother! Will be checking out Crawler innovations👍🏻
Man just a fan, I have been a grappler my entire life and work at 2 gyms. Fought professionally at flyweight (125) and I got my world series of grappling titles at 129.
I'm subscribed on your bike channel and I thought your face looked familiar lol bikes and Rc cars. you should find a mounting system for the bikes by I bring my Rc a lot when I'm on my bike rides
@@arkansasrcnewbie I've similar shocks and already made the stl files... The shock piston is around 9.5mm... Similar like that of wltoys 14th and 12th scale...
lol 110mm has a very long barrel and a long shaft, your using droop to lower CG but then your shocks are soo very long! for straight axles I use 90mm and 80mm for portal axles. I would sell that shockss to someone who needs it for monster truck builds. setup is really done wrong. if you need weights, install it on the axles like portals covers etc. don't use it on the wheels. crawler innovation soft goes in front to grip when climbing, the rear are mediums so they don't compress when weight transfers to the rear... medium aids in climbing.
Yes a full droop setup would be riding on the bump stops but if u set it up right they wont ride fully slammed but just a little bit less than that. For a crawler this allows for the body to ride lower thus lowering the center of gravity and have more down travel.
Cruising through youtube researching droop setups and came across your channel. Very first thought was oh damn its wolftick! Enjoy your bike videos, and also enjoyed this one. Subscribed
Well man thank you so much, I appreciate that! That's a true #wolfticknation fan!! Lol
I have a question! 😊
Just about to order some of these for my Acme Racing Bullet 1/10th buggy restoration.
My stock shocks measure 90mm from mounting hole to mounting hole centres when fully extended.
Do the sizes quoted on the ad relate accurately to this dimension or is it total length of shock?🤔
Cheers
The disc is actually large enough to reach the shock walls. You're comparing the sizes at the very top where the body screws into, once past the thread the disc is actually flush and has minimal slop. They ain't lizards but they're fine on a budget and with thick oil.
Appreciate the input brother.
Anytime, I do wish they came with a lighter spring though. I'm in the market for another set of shocks@@arkansasrcnewbie
The episode i What to watch HéHéHé! Is the Info I need to make my Choise!
That Chassis and upgrades are some kind of a Beast!!!!
Thanks Panda, the shocks seem to have a nice look and feel. Hope they perform well too!!
@@arkansasrcnewbie Yha! But I was a little disappointed with the clearance it has on the piston and doesn't let it have a smooth job. See how it goes in the Tests!
I have those same shocks on my brazin scale atl trx4 build but i used the 90mm with losi mini t springs and 60wt oil and they are nice and smooth for a cheap shock.
Awesome to hear man, thank you. I have an idea to run some thick stuff juat incase!! Lol Thanks
@@arkansasrcnewbie yes sir.
Try stp oil treatment in your shocks. Thats what i use in my proline scaler shocks.
Ooh!! Good idea 💡 thanks man!
Man that chassis it looking killer bro! Can’t wait to see how them shocks perform. Wicked shock angle
Yes sir! I really had to move them around, but super excited about it. Thanks brother, I wanna killer build like yours!!
@@arkansasrcnewbie your well on your way! Btw I ordered some of them shock keys! They a lot cheaper than the rock pirates lol
Put the softer foam up front. You want squash in the front & firm(med)in the rear.
Yes Sir 👊 Thanks, I thought about that. Will do!!
They have different bodies....i buy 110mm and 90mm, take the shaft of the 90, put in the 110...and lso take the 90mm sprungs....running same lcg chassis in 2 cars, with this shoks, i run it with 20wt....they are awesome
Dude that's great to hear, Amazon here I come! Thanks
are they better than the desert lizard shocks?
Nope......😔
Thks for sharing bro! I’ve subscribed 😊
WOOHOO!! Thanks for the love brother
Comes with the little orange o-ring in the kit, is this just a spare part or what am I supposed to do with it?
Used to put on each side of the eyelits when installing.
I think they are just a cheap internal spring shock. Not really like desert lizards which are super smooth & designed to be sprung or drooped or in between imo
I agree, 4 are cheaper then 1 desert lizards lol. Super budget, which usually means cheap unfortunately lol. Thanks for watching brother
@@arkansasrcnewbie your welcome
How are these still going?
Salut esque tu peux me dire l huile que tu a mis de dans
Hey, I talk about it and list it in the video.
Great video and channel my friend 👌👌👌👌👌👌👌
Thanks for sharing 🎉🎉🎉
New friend and subscriber 🇸🇻👨👩👦🕊
Have a wonderful day 😊😊😊
Well thank you so much for subscribing and commenting! Thank you 😊
Bro it’s the piston shaft Hense the piston being mounted to it
Thank you!! Piston shaft or I'm used to calling it a stanchion from mtbing.
How well do you think those shocks would be for a upgrade for a Redcat gen7 my little brother is looking for a cheap set to upgrade his, the ones he has doesn’t seem to really flex or droop if you pick up a corner the other side stay a right where it is
youtube them. the reviews aren't good. the shocks aren't worth getting
Man I'd give it a shot, I have the gen 7 myself and I could see running these. But have your brother watch the video we're I cut the shafts and relocated the links...Ot really helped with flex and was all free. It should do the trick, if not turn him on to these. Don't Kristen to these trolls.
@@arkansasrcnewbie thank you so much man I’ll have him look into that
Hey there my friend! I do like those Injora shocks bud! I’ve got a few sets of them with the springs on the outside and I love them. Not sure what to think about that smaller round flap wheel with the holes in them. The ride will tell right!? Like your “mail call” section of the video dude. You got some awesome stuff. I don’t have the individual weights for my RGT, but I’ve got weighted or heavy metal wheels which haven’t given me any issues yet except for loosening and falling off once. Love the gold wheels brother, those are wicked dude! Great video brother! Will be checking out Crawler innovations👍🏻
Well thank you so much for the support and good input. I appreciate that man, also I love some mailtime! Lol 👊
Iowa hawk. What weight class?
Man just a fan, I have been a grappler my entire life and work at 2 gyms. Fought professionally at flyweight (125) and I got my world series of grappling titles at 129.
I'm subscribed on your bike channel and I thought your face looked familiar lol bikes and Rc cars. you should find a mounting system for the bikes by I bring my Rc a lot when I'm on my bike rides
Thay would be an awesome idea! Thanks for the sub and recognizing lol.
#wolfticknation
Salut moi je suis française peux tu me dire se que sa vaut sinon je veux les acheter merci pour la vidéo désolé je suis pas bilingue
Hey brother, I would say I would be willing to pay $40
Or go to cad, draw custom pistons, print those pistons using resin...
That would be amazing, I wish I had the know how to do so!
@@arkansasrcnewbie I've similar shocks and already made the stl files... The shock piston is around 9.5mm... Similar like that of wltoys 14th and 12th scale...
The last time I seen anyone review injora shocks it wasn't good.
yeah all the reviews on these shocks aren't good. these shocks are just junk
We shall see lol.
15k differential fluid will slow down the return rate of the shock
Nice! That's exactly what I need 👍
I'm paron Arkansas man wld love to go crawling with u I'm new to rc and trying find people and comps
Dude! Please do checkout the pages on Facebook. Hssc and Occ
lol 110mm has a very long barrel and a long shaft, your using droop to lower CG but then your shocks are soo very long!
for straight axles I use 90mm and 80mm for portal axles.
I would sell that shockss to someone who needs it for monster truck builds.
setup is really done wrong. if you need weights, install it on the axles like portals covers etc. don't use it on the wheels. crawler innovation soft goes in front to grip when climbing, the rear are mediums so they don't compress when weight transfers to the rear... medium aids in climbing.
Man thank you for the input. 👍 Great rundown
Why do people like this droop setup? Droop is running on the bump stop like a poor mans low rider, just so we are on the same page.
Yes a full droop setup would be riding on the bump stops but if u set it up right they wont ride fully slammed but just a little bit less than that. For a crawler this allows for the body to ride lower thus lowering the center of gravity and have more down travel.
Chassis looking good, bead locks on point. You sound like you regret the Injora shocks. 🦥
Lol, a little. Setting them up I found they are a little cheap feeling....But who knows
@@arkansasrcnewbie I guess we will find out how they perform when the rig is finished.
those things you call plungers are called shock pistons
Good to know