Buy these for HDZero Goggle: Antennas, Battery, Analog Module, Mic, and more
HTML-код
- Опубликовано: 7 фев 2025
- Antennas
The best antennas for HDZero Goggle are TrueRC X-Air MKII paired with Lumeneir AXII 2 stubbies or TrueRC OCP. You can buy the TrueRC X-Air MKII kit for VRX-4 receiver and replace the rail mount print with this one: www.thingivers...
www.racedayqua...
www.truerc.ca/...
www.racedayqua...
Ball joint patch print www.thingivers...
SMA extensions
www.racedayqua...
www.racedayqua...
USB HDMI Capture
www.amazon.com...
play.google.co...
HDMI
www.amazon.com...
www.amazon.com...
Power
Note: Fatshark 18650 case works fine, the problem is "smart" cases or cables which have an 8V regulator that doesn't provide enough amps
www.racedayqua...
USB-PD
www.amazon.com...
www.amazon.com...
Hard case
www.amazon.com...
Analog Module
www.getfpv.com...
www.getfpv.com...
Audio
pyrodrone.com/...
www.amazon.com...
www.amazon.com...
Hawk Apex HDZero 3.5in and 5in
www.getfpv.com...
www.getfpv.com...
TinyTrainer 3in
www.getfpv.com...
Whoop:
www.getfpv.com...
www.getfpv.com...
www.getfpv.com...
Super helpful video. Getting my hdzeros and then finding out i need to power them, add analog adapter, analog module and a bunch of antennas.
You present things in a calm and understandable manner too. Super helpful, thank you
Thanks! Enjoy the goggles
@@RyanQuellet Ryan! I dont know who to ask for advice
I went with the batteries you recommended (21700 LI-ON 4800mAh 2S 7.4v DC5.21 for FPV Goggles)
I have the 608AC smart charger
But upon connecting either of my batteries to the charger, they both show the first cell severely under voltaged
1st cell 2V
2nd cell 4.5V
And whenever i try to charge with the balance cable connected my charger says chemistry error or abnormal cells voltage
I really dont know what to do or who to ask
@Lurpi confirm if this charger properly balances other batteries. If it does, then dispose of the 21700 2s pack, it is dangerous to keep. Sometimes batteries go bad, even right away. Buy a other one and carefully watch it balance charge
Thanks Ryan, it's pretty exciting times, there is a lot of good things coming out in fpv, I just hope we can keep flying freely. It is really helpful I'm sure to many of us who are new to hd zero to have these down to earth simple videos explaining the features and what is compatible.
Thanks, I really hope this video helps the community out!
Just picked up the battery for the goggles thanks for all the tips Ryan!! 👍
So great to finally be getting a well thought out goggle, obviously designed by people who actually fly. Can’t wait!
😀😎
Great tips as always. You know I realized I actually had lhcp on the tiny trainer last week snd 2 rhcp on my goggles. It worked damn well lol
Appreciate the breakdown! The analog audio with digital video is exciting. I am really into ground vehicle fpv. I have a Slash 4x4 with a 3-axis action cam gimbal to stabilize the analog feed from the Phoenix2/akk race ranger and a little Losi Mini-B simple setup. I have been following hdzero because of the fixed/low latency. Variable latency in a high speed r/c buggy is not what I want... but I was worried about audio setup with the new systems. It is very helpful to hear the tires skidding or spinning.
I am planning a 1/5th scale build with a 3d printed gimbal, I am sold now that hdzero is the way to go. Cheers!
Have a solution/work-around for live audio is so nice. I hope a lot of people give it a try, because there's so much feedback you give up by having no audio. You can hear issues with a tune, bent props, tire slip. Who would play a video game with no audio?
Killing it with the content recently Ryan! 🤘
Want to watch this at home on a big screen and I'm out and about at the moment but just wanted to say thanks 👊
I like the style of your mustache. Keep pushing the good content
The USB-C PD adapter in your list is 5.5x2.5. I believe the goggles are 5.5x2.1. The other listed adapter is 5.5x2.1 in your list.
Good point. I'll double check compatibility
I found a 5.5 x 2.1 90deg PD adapter and updated the description. Thanks for catching my error
Can confirm the 2S-3000mah GNB goggle batteries (that have both XT30 and barrel plug) can power the HDZ Goggles, but not for very long. I got maybe 20min out of it before the goggles started chirping at me. Going to need to go bigger! Have you done much testing with regard to using larger 2S packs versus smaller 4-5S packs? Home testing I have just used a 4S-16,000 but naturally not going to haul that brick around with me lol.
Pretty massive oversight to not have native USBC PD as an input option IMO.
I hope brain3d, RDQ, getFPV, Pyrodrone, etc. are provided a track adapter to print and sell or buy and sell.
Thanks Ryan! Great common sense recommendations!
speaking about batteries.... what about the GNB 3000mah 2S? It is one of the most compact batteries.
This video is just what I needed.
Ryan your content convinced me to go all in on HDZero this year and all the analogue gear is gone 😬 I’ll be ordering these goggles when they come back in stock 👍 I’m getting a Five33 Lightswitch built can you please advise on exactly the right vtx/camera combo for good 90fps? Or any other tips for a lightweight agile build on this frame? 🙏
having the mic and video out is pretty awesome. Had to jump on the goggles 2 but would really want to see what the hd zero goggles feel like. Tbh I had a bad experience with my HD zero module.. I have the original kickstarter orqa's which had hdmi issues making anything I plug`in laggy/stutter (sim or hd zero, so nothing to do with the module).
Great video Ryan
I've read that RHCP is for analog and LHCP is for digital systems. I haven't tested it though.
You can use either one. Default on hdzero is rhcp
Hi There,
how long are the BLUE SMA Male to Female Extension Pigtails? also where did you get them? you may have said so in the video.
great video
According to another channel they only need 15W. Any 2 or 3 cell 18650 cell set can do that in its sleep.
Very nice explaination. What would you recommand for the quad using hdzero race vtx v3? So far, video signal has been terrible for me. Cannot even go more than 200 feets with 200mw output.
do I need to match left and right antenna types?
Thank you VERY much! Just what I needed as a total noob
Thanks love you videos. For the tbs module do I need to buy the hdzero module adapter?
Thanks! I just received my goggles for use with a DJI Mavic-3 with DJI RC-Pro Controller.
The HDMI input of the goggles works ok BUT I cannot seem to get the internal DVR to start recording. We are using these to replace a DJI Goggles RE Racing Edition for Fire Department drone operations.
(Tried “auto” setting AND pressing the “function” button).
Also, how comfortable is the cushioning foam? The goggles came without foam and Velcro and I’m waiting for them to ship separately.
Thank you!
great video. thanks for doing all this work
Thanks! Took a lot of time to track down all of these things, but it will help others out a lot I hope
Great video Ryan. Nice video.
Wait, we need a video on this last thing about using an analog VTx for audio. Don't the channels conflict?
How did the auline 2s battery work out for u? I’m looking for a battery to toss on the head strap? Decent run times?
I really like it. This is the pack I use every day now. About 2hr run time, set goggle min voltage alarm to 2.9v per cell
@@RyanQuellet I haven't been able to find out anywhere else, do you have to get an external charger for that battery? I'd assume so but I don't know. Could you recommend one if so? Thanks.
Hdzero googles compatible with the tbs pro vtx?
Hey, nice vids. Can you explain how to install this zeus vtx on any quad? Like do I have to cut the USB C from the BEC and then solder red and black on the zeus?
Are the x2s sold for dji? But they work on these? I saw dji on them and thought damn I can't use those 😂 I got the singles but I don't do long range lol
Great info Ryan.
Thank-you.
Thanks, Ryan. Do you know when we can place orders for the goggles again?
Mid January
@@RyanQuellet Thank you!
is there any live audio such as dji air unit
great help these videos, appreciate all you are doing 👌
My pleasure!
I guess I can test this when I receive mine but how many watts do these pull?
Thanks for the video Ryan ! Do you know if a TRS microphone could also work?
No, only a TRRS pinout works. You might find an adapter from TRS to TRRS on Amazon
Get the TRRS to headphone and microphone splitter it’s a TRRS to 2X TRS one for a mic the other for headphones or just rewire. I do both personally.
Good luck.
@@lemonsquareFPV Do you have a suggestion for this splitter? I started to look for one but gave up
@@RyanQuellet I do Ryan:
UGREEN Headset Splitter Audio Mic Y Splitter
Is my favourite one, but just search:
Headset Splitter Audio Mic Y Splitter or similar…
And you will get an extraordinary amount of options.
Hope this helps.
What about VAS Ethix MadMushroom V2 5.8GHz Antenna? I was thinking about buy these for my Hdzero goggles and TBS TRIUMPH PRO (U.FL) on the aircrafts..... What do you think about this? Great Video! Subscribed!
What wall charger would you recommend? Thanks!
@ 5:09 you say "it can be better to mix left and right hand antenna's on the receivers".....but then right after you say "but in general, it doesn't help, and don't do it."
While I totally respect your intelligence AND your commitment to HD Zero, that statement is equivalent to a double negative in grammar.....
6:55 Is there any USB HDMI capture for iPhone users?
Ryan, I’m one of the guys affected by the slide plate on the TrueX patch antenna.
I’m not on Facebook. I’d like to pick up the correct set, and don’t have access to a printer.
How else can I reach you?
Received my HDZ’s a few days ago, but the faceplate foam was scrunched up in the box and creased really bad. Let it sit for a few days now, but not improving enough to keep light out. Anyone know if any other brand goggle foams will fit the HDZ’s?
Contact support and I bet they'll mail you a replacement foam. Otherwise, the skyzone O4X foam is an almost perfect match
Nice video, Ryan. Does the TBS Fusion module need external power like the Fatsharks.
All modules work without external power
Sorry I meant the power mod that comes with module for some fatsharks that don't supply enough voltage for the fusions wifi
@@Tom-jw5xf The goggles supply enough power
Hey Ryan I'm super excited to get the hdzero goggles, but I've got a question for you I run the cobra x so I can wear my glasses having an astigmatism and all. Can you go over what is needed to get the lense inserts for the hdzero goggles, as I'm hoping to get everything done at once if able.
To correct for astigmatism, you'll have to make prescription diopter inserts. The CAD files you'll need to show the optometrist are on Github. People are working through this process right now and I'll share their findings
Would triple feed patches work well with these goggles?
Yes
@@RyanQuellet Thank you for your reply
Thanks for all the info, Ryan . Currently still running sharkbyte 0n Hd3. I'm looking at these for my next major expense. Is the pin arrangement for the analog module standard,ie, can I use my True3d?
Yes, the analog module adapter uses the standard goggle module pinout. It works with all analog modules that have buttons on them to change channels (the goggles can't control the module)
Why do we need 3D prints to mount these patch antennas. Wasn't this goggle build to fit them out of the box?
Why not? The 3d print is quick and practical for this little hobby market and makes it super easy for users to design their own antenna mounts
@@RyanQuellet yes true. But I thought this rail was specifically designed for these patch antennas.
@@sten6537 it’s an open source project. Take what you can get…
@@sten6537 not exactly a polished product
@SM-MouldSpec HDZero gave a possibility to attach antennas to the goggle, now the manufacturers of antennas have to produce antennas with this goggle in mind, as TrueRC did. until "today" none of the antennas had some sort of mount now HD Zero made the first step...
Great video thank u.
I cannot get video from my hd zero freestyle vtx. The rx and tx wires should only be for OSD correct? I should be getting video as long as vtx is powered up. When I scan for channel, nothing is found. I have carefully followed updating procedures, but I am getting nothing. Do I have a faulty vtx maybe? Any suggestions would help, thanks.
So if I fly analog, does the mic audio still gets recorded into the video?
Yes, when using the analog input, analog audio is recorded to DVR. When using the hdzero input, analog audio is recorded to DVR also. It records the same thing you see and hear
I might buy these goggles to run my new caddx vrx instead of buying walksnail goggles,I could run analogy, walksnail and hd zero on all my quads from these goggles but I want great reviews before I consider it,also you should provide 4 antennas with the goggles free because at cost antennas are very cheap and I won't pay more than500usd ever,I own aomway commander V2 which are still fantastic and better than any LCD fatshark goggles,so if prices stay stupid high you can keep them
I just subscibed. I am into the hdzero stuff too, It being a little more budget friendly. Havw the betafpv hdzero meteor 75 for indoor flying. Plan on getting the 85 for outdoors. You mentioned a power bank to power the goggles. I like the idea but not sure if it's safe .I herd that it could fry your goggles. Is that true? Hope to hear back on that from anyone. Thanks.
You won't fry thr goggles from a power bank. The max voltage from a power bank is 20v, which is below the maximum for this goggle
@@RyanQuellet Oh good to hear... but i am using the old aomway commander v1 goggles.
Awersome!!
It's crazy to me that a $600 pair of googles doesn't come with antennae heh
😀😀
I can’t believe there are so many accessories when there’s only 500 goggles for launch. I really think HDZero missed out while they had the chance. 5000+ WalkSnail VRXs sold and DJi with O3 that really makes HDZero look like glorified analog, HDZero won’t sell enough VTXs to keep up in market share.