Convert Standard Power Supply to work with HP Elite 8000, 8100, 8200, 8300
HTML-код
- Опубликовано: 14 ноя 2018
- Catch us at: ayagroup.com
Get more info or Buy this item at: bit.ly/2QNxq48
SKU# AYA-24PF-6PM-HP
NEW!!! PLEASE READ: We have made an adapter that will work with HP Elite 8000 Series that will work right out of the bag, no need to re-arrange the pins. Use this link ... bit.ly/2Df4Qnn
Summary:
This is 24Pin to 6pin PCIE adapter. With this adapter, you can convert any standard 24Pin ATX power supply to work with your HP computer.
It is compatible with HP Elite desktops, HP Z workstations, and other HP computers.
This is what it looks like right out of the bag and it will work with HP Z220, Z230, Z240, HP 6200 MT, HP ProDesk 600 G2 SFF and HP EliteDesk 800. This green loop
here is to bypass the 515 fan error message so you don't have to press F1 every time you boot up the computer.
To make it work with HP Elite 8000, 8100, 8200, 8300, the pins need to look like this. See the difference? Let me show you how to rearrange it.
Use a paper clip and press firmly at the of the holes and gently pull the wires at the same time. This is what it looks like inside. You wanna get this part to flatten so it
will slide out. When you put it back in, make sure it hear that click sound otherwise it's loose like this.
You connect this 24Pin to the power supply's connector.
You connect both of these 6pin connectors to your HP motherboard.
You can get more information about this product from the comment box below. Feel free to leave any comments, I will definitely respond.
Don't forget to subscribe and thanks for watching! 
Хобби
I spent all day trying to eliminate the 515 fan error, and HP told me I had to go to a PC technician cause they could not figure it out. They said there is something wrong with you fan. I saw your video, and it was the only one that spoke about the loop. So I tried it and it worked. Well done, and thank you.
Finally someone who shows how to change the pin layout. Thank you.
Thank you. This is by far the clearest video on this subject, and the only one I saw to mention shorting the fan pins. I did have to switch the order to be reverse what you have here for my particular HP 8300. Fortunately, none of the wrong configurations I tried seem to have destroyed my computer.
thank you guy. it worked
thank you for saying that rhe 8200 are in the middle no one said that
does it work on hp 8300 like on the video ?
Awesome video finally i have good details how it goes wanted to change the psu on my pc but wanted to make sure how everything works outs thanks man
Thank you! You are great!
This Adapter cable worked for my HP Elite 8300 , no PINS re-arrangement needed, used the original layout just the way I received it ( White Flat Connector, from pin#1,BLACK,RED,YELLOW,GREEN, and the last two, pin#5 and pin #6 are jumper together). No CPU Fan Failure at boot up. I did tried what the video suggested in the beginning but it did not work with my 8300. After reading review post in Amazon about this cable, the original lay out of the pins work just fine with my PC. Only one slight problem, fitting my 520 watt power supply into the HP Case, drilling time. I am also using a 4Gb Zotac Video card, its the reason why I needed to upgrade the PSU.
Thanks Aya Group for the adapter.
Hey @localh your HP elite 8300 comes with i5 or i7? Do you used the 24 pin or 20 pin configuration cable from your PSU ?
My HP Elite 8300 came with i7 and the power supply i am using has the 24 pin configuration. I hope this help, I was about to return the adapter till I gave it another try.
@@localh Thanks for your answer! And It's pretty cool you finally can use the adapter, in my case nope :( I swear you I've tried all the possible configurations for the F$%& pins but nothing.... It's really weird that the fans rotate at full speed...I don't know....hope AYA responding me soon, any way, thanks again! and Regards!
I had the same thing happen to me I had to buy a motherboard and it works now
@@javolife bit.ly/2Df4Qnn
I really respect how much you help others. Found a schematic or two. I'm checking every pin I can. lol. omg. Don't forget there is a 5v to 12v voltage reg. step up on it. So I have a HP Compaq Elite 8300 CMT (Convertible Micro Tower). And I will dig in when MODDIY arrives but you are 2nd source confirmation.
The voltage regulator step up threw me tonight but I get it now. And they're not that different.
Moving to a nicer case.
For the rest of you your probably going to be confused until you look at the schematic(s) there are two on the web. Not far of a search.
That is my last HP ever.
I will build my own f/ here on out.
Is it something I need to be concerned about?
thanks a lot man
*Thank you* 👍👍👍👍👍
Now we need some 24pin ATX to 7pin pwrcmd adapters premade for other HP systems. These look like JST PH 2.0mm 7 pin female connectors?
In your video it is said that the Green Wire Loop is required for HP 8300 tower but in your listing on website the Green Loop wire is not visible. Can you confirm .
I bought the adapter for the elite series even though I have an HP pro desk 600 g2. (This adapter wasn’t available). I assume I can do the reverse of this and get the same results.
Your info is wrong about pins and about bypass loop for 8x00 series CMT.
For 8x00 series at 00:51 if we start from left this is how the pin arrangement goes. Forget about colours as they can be different for different after market adapters. Just arrange pins as below.
Pin 1= Ground (can be taken from any ground of 24pin atx connector) - Black wire in original connector and Empty in some 8x00 CMT models.
Pin 2 = Empty - Empty in the original connecter.
Pin 3 = Power Ok(Power Good) - Grey wire in original connector
Pin 4 = Power On - Green wire in Original connector
Pin 5&6 = Jump to remove 515 error - white and white with red strip in the original connector.
This configuration works for 8x00 CMT. I am using it.
Damn, I was stuck and your comment helped me get my 8300 CMT working with a 600W PSU & cheap Aliexpress adapter.
Boots fine, with no PSU fan not detected error! (Nvm, I get it sometimes, I really need to bridge both pins then)
Now the colors in my adapter were nonstandard but I just followed the standard ATX 24-pin 12V Power Supply Pinout and was lucky enough that the 24PIN part of the connector has the numbers of the pins labeled on the plastic.
In case someone else has the same adapter I got, where it's got a gray, black, yellow and blue wire right in the middle, leaving the first and 6th pins empty, here's what I did.
Firstly double check where the colored cables that go into the little white HP 6 PIN connector come from the large 24 PIN Mobo connector.
I took out the Yellow cable PIN 18 (Ground) and put it into PIN 1 of the HP connector.
Took out the Gray cable PIN 8 (PWR-ON / Power Good) and put it into PIN 3 of the HP connector.
Left the Black cable PIN 16 (PS-ON# / Power Supply On) into PIN 4 of the HP connector.
Left the Blue cable PIN 17 (COM / Ground) into PIN 5 of the white HP 6 PIN connector.
Left PIN 6 of the HP connector empty.
Hi. What is the pin order to work in the HP Elitedesk 705 g3 SFF? How can I check if it is correct before plug it in my mobo?
Hello, I wonder if you have an adapter for the HP pavilion Desktop TP01-0066 model. I would like to know if you have one for this pc or which one works for this one and if I could avoid the error message. I need one to update my pc.
Purchased Adapter cable for HP Elite 8300 and have several problems:
1. Didn't receive the fan error bypass loop
2. looking perpendicular to the six pin towards the PSU, the wires are empty, empty, gray, green, white, red & white stripe. Need to know how to arrange the adapter wires.
3. Your adapter cable is a 24 pin female. My PSU is also 24 pin female. Do you know where I can get a male/male adapter?
Does this also work with the hp compaq pro 6300 ?
The title says this will work for the 8000, but the webpage to which you linked doesn't mention that model. Will it work for the 8000 CMT?
Hi and thank you
From the HP Elite 8200 Technical specification, and from looking at the used pin outs on the board it seems for the CMT that the pins are
Conn Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6
P1 RTN RTN -12 V +12 Vmain +12 Vmain +12 Vsb
P2 FANcmd Fan Speed PS On Pwr Good Rsvd Rsvd
P3 RTN RTN +12 Vcpu +12 Vcpu
Plug three looks all good, but plug two looks like it can be used without altering the pins, plug one looks like the adapter is sup[plying +5v not +12v (but this is a control voltage so may be OK)
Can you use your cables as supplied for this
Thanks
will it work with Dell Inspiron 3268 SFF desktop. It also has 6 pin ATX power supply.
Hi, THX for the video, But one more quetion, the cables are color coded?. I mean : yellow = 12 v,red = 5v etc?
Want to ask will it work hp compact elite 8300
So I got one of these for my HP Prodesk 600 G1 TWR but it didn't include the loop to bypass the fan error. If I put a paper clip or something to short out those pins, will the error go away?
Did it work using paper clip?
which one works on the Hp 6005 Pro?
I need an adapter for the HP Prodesk 600 G2 MT PSU
I have a question about the cables. I have the same power cable but instead of the cable being red, it's white. Will it work the same?
Did it work haha
So how would I get this cable in the UK, but without costing a small fortune in shipping from the US?
is this just so you dont get the fan error msg?
Desktop pc works but there is error 515 for power off. All coolers do not stop.
I have a hp M01-F0024 will this work for me
Would this work for the elite desk 800 G3 models or would I have to rearrange too
Can you help me with this problem I’m having I have the same cable as you but my pattern is white red green two black what do I do
does this work for hp z240 out of the box?
where can i get an adapter for my HP xw6600 workstation. I'm trying to Up grade the 650w PSU to a 1000w PSU.
Guys, does anyone know what combination should be for 700 g1?
does it work for hp 290 g1 mt ?
Hi can this work on my Dell optipex 3050?
I was under the impression that the Elite 8000's PSU could not be upgraded, so this cable tricks the board into accepting a new PSU?
Yes, it can be upgraded. This adapter supports PSU up to 1000Watts.
Just had a look, the shrink wrapped area of the cable - it that a 5V to 12V convertor ?
Yes, 12v to the 6pin PCIe connector, the 5V is the 24pin ATX connector. If you need it for Elite 8000 series, we have one that doesn't need rearranging the pins ... bit.ly/2yUKu07.
Email us sales@ayagroup.com and I can send you a picture of the shrink wrapped part.
I tried this fix with an HP Compaq 8000 Elite Convertible Minitower, but still, get the 4 beeps when it tries to start.
Did you fix it?
oye amigo yo compre este cable lo conecte y me pide que presiona la tecla F1 y la precione y despues resulta que cuando la apagué la pc se cierra normalmente el sistema operativo pero motherboard y el mouse siguen encendidos no se apaga por completo y tengo que desconectarla para que se apague normalmente que puede ser
on the HP z240, there's a 4pin wire from the PSU going to the motherboard. How can I source this from the normal ATX PSU? This adapter only takes care of the motherboard power source (the black 6pin) and the PSU command plug (the white 6pin).
yes, same question as me
Hello, im curious with the PWR CMD, does it same as the other compatible model?
No. They are all different. You have to match the pinouts to get the right combination to work. Make sure that you check and re-ceck before you try it. You get one chnce to make a mistake on this project. I have a Z240 Tower and I just added a full video card which forced me to upgrade the power supply. My PSU adapter didn't come with loopback pins or pinout instructions. I figured it out and the only problem is this annoying error.
Can i use 20pin?
work in 6300 pro SFF?
Will this work for hp compaqq 8100 sff
What repin order for HP Compaq elite 8300 SFF
I have a HP Elite 8300 CMT. I need to know 100% if this will work.
Yes, it works.
how can i make a hp 8000 powersupply work in a hp 800 g1?
Sir I need this cable or hp elite 8300 cmt power supply in Dubai please reply please
What about the 4 pin slot on an Elitedesk G1 800 that says "PWRCPU" ... nothing gets plugged in there?
No you need a 4 pin connector from your power supply
@@grant1056 I got rid of that piece of shit
thank youuuuuuu
Just got one adapter to my hp elitedesk 700 g1 sff, andddd this adapter didnt work, try re-arrenged the cables but nothing, before the cpu turn on and off, cooler fan just cycles, re-arreged when I press power the light turn red and beeps everywhere! If I connect the original psu ( withut adapter) everything works fine
hello, did you solve with adapter?
I have an HP EliteDesk 800 g1 tower and I tried plugging this in with my thermaltake 500w psu and I couldn’t boot up what do I do?
We responded to your email, please check.
Was this sorted?
Where can I get one for hp 280 g3
What is the name of this adapter
My wire colors aren't the same. What do I do? My yellow wire is white and red and green are switched. It's black green white and red.
Just look at the order the wires are in this video on the first set of wires, and again in the second set of wires then make a note of which wire is moved where, then move your wires in to the same positions as they are on the second set of wires. Pause the video at 1:03 for a good view of the wires.
Ive looked at the pins, and the order you need to put the wires in,according to the colouring of your wires, should be:
[PIN 2-GREEN>PIN 3-RED>PIN 4-BLACK>PIN 5-WHITE] WITH PINS 1 AND 6 LOOPED TOGETHER.
You may have already solved this, but if not I hope this helps.
work on hp compaq 6000 pro sff ?
Mine has 3 wires..
Hp 6300 Mt will work ?
اشكرك
i have an HP EliteDesk G1 800 Tower and all the wires are on the other side then what your showing what do i do
bit.ly/2Df4Qnn
can you use the cable for a hpcompaq6000pro as well???
bit.ly/2Df4Qnn
Hp prodesk 400 g6 help!!!
Elitedesk 800 G3 has 4-pin on Mobo, will the 6-pin adapter works still?
yes, same question as me
Will this work an a elitedesk 800 g1 small form factor?
Yeah
...
Yes, it will "work" , but, there are issues that you will have, 3 issues, those issues are:
1.) A error screen showing you that there are 3 non- responding hardware issues.
A.) PSU Fan.
B.) Front Sound.
C.) Front/Top USB.
2.)Remember, that you are taking a HP. M/B out of a proprietary case built specific for HP/Compaq, that has specific built parts. And you are transferring that M/B to a completely different case with different hardware parts that are not HP/Compaq, compliant, such as the USB header, and HD sound header plug in receptical.
3.) Power switch configuration issues.
And this moron that made this video doesn't explain at all which reconfiguration of wire pin works for a transfer of a specific model, and this video only mildly addresses only 1 error not all 3 that you will clearly get., This moron only addresses the fan error, and is not very specific about it either.
I will try and give you a detailed explanation as to adding resolve to your issues you are not doubt having.
Thing is: From you "old" HP case, remove BOTH the USB/headphone/microphone jack assembly, and the power switch/wire assembly, Now study these HP Proprietary parts vrs. The new cases front usb/headphone/microphone jack wording configuration, and try and reconfigure the new case's wire pin to best match the HP, assembly.
Now, the power switch, Same thing here applies, study the HP power switch wire pin assembly, and compare that to the new case power switch wire configuration. On the HP M/B you will notice that the power switch header is in a 4-1-4 pin lay out, ie ( 4 pins on the left, 1 pin in the middle, and 4 pins on the right side ) Route the new cases power switch cable ends to the HP M/B as best you can, this can be tricky so pay very close attention to the detail, wire color is insignificant, as you must match the new case wires to the correct pins onto the M/B, you have:
1.) Power switch
2.) Activity l.e.d
3.)Reset switch
These are the main 3 power connections you should be concerned with.
Once you can get through all this hoop jumping, you will have a perfectly operating Frankenstein build.
Good luck, I truly think this will help you. And this method I explained is compliant to all older HP/Compaq, regardless of model.
Hey is there a pin configuration for hp PRODESK 600 g2
I haver the same question...I manage to Power on...using 6 and 5 for ground, PIN 4 for PWOn , PIN 3 for PWoK....but i get the error 90E on my 600G2
HP RP5800?
Which one should I use with an HP Compaq 6300 Pro?
work?
Te sirvió?
I didn't try it in the end.
So can you this on dell optiplex 3050
Sorry that is a totally different adapter
Hi Brother nees conection For hp z220 please
I need the configuration for the Hp 8300 elite please !!!!! The big tower please someone help
Here ya go, will work right out of the box ... ayagroup.com/products/atx-main-24-pin-to-6-pin-pci-e-psu-power-adapter-cable-18awg-for-hp-elite-8100-8200-8300-800g1?_pos=1&_sid=17b48b254&_ss=r
Aya Group do you ship to the United Kingdom
@@ibraheemknowledgeseekah9889 Yes, we do.
I have a HP Compaq 6200 pro MT will it work, I bought something like this and it didn't work it killed the power supply that I was adding into my PC, I need a higher wattage PSU to run the newer graphics card
I bought one and had to repin it for my HP 6200 Pro MT and it didn't work it gave an error beep
@@JustinFrost302 osea no funcionen hp 6200 pro MT
I trying to use this adaptor with a 600watt ATX Power supply with this adaptor all I get is a red light and sound when trying to attach it to the system. this is a hp elitedesk 8-00 g1 with i7 cpu.
I have tried all the pin for both 800 and 8200, and updated pinout all the same results.
Reverse the pins. Yellow > Black > Green > Red. We discovered that different Elite 800, 8200 has different pin outs.
@@ayagroup702 in the video you show 2 pin layouts, I like to confirm is the change you recommend from the default or the second pin out mentioned in the video.
@@rogfleming1 Change from the second pin out. If you need an image, sent us an email sales@ayagroup.com
Is this safe
i couldn't get the pins to come out haha, well that's frusturating
Is there another one for 4 pin bro ?
How do you get this to work with a hp compaq 8300 elite sff I rewired it like in the video but i get 5 red beeps when i turn it on
Reverse the pins. Yellow > Black > Green > Red. We've discovered that different Elite 8300s has different pin outs.
@@ayagroup702 I tried it with the short green wire and it didn't work "green>yellow>black>green>red>green"
@@davidgarcia-sq6ot We only know of two pin-outs for HP Elite 8300 unless there is a another one. I will google it.
bit.ly/2Df4Qnn
@@davidgarcia-sq6ot i used that conection and worked, just that the bypass conection didn't work, what can i do?
i have a hp 8200 will this work if i get this cable and re arrange the pins?
Use this link shorturl.at/efkwL , no need to re-arrange pins. Works out of the box!
@@ayagroup702 umm. How do i use this link?
MarinosGR Click on the link
@@martinmavroforakiss6024 ayagroup.com/products/atx-main-24-pin-to-6-pin-pci-e-psu-power-adapter-cable-18awg-for-hp-elite-8100-8200-8300-800g1?_pos=1&_sid=2ab0ff29b&_ss=r
@@martinmavroforakiss6024
RUclips has screwed your shorturl link with a re-direct encryption. It doesn't work.
I have Hp elitedesk 800 g1 sff i dont know which one i should buy that would work for my pc
Note : Sorry i'm bad at cable management so i need a help Please help
Tbh i understand a little that it would work with the 4 P2 cables in the middle
But mine has 5 cables on the P2 pin... That's the thing that confuses me
The diagram of my P2 pin C is cable
P2 Name
C Blank C C C C
Back side
What about 6300? Is there any similiar method?
bit.ly/2Df4Qnn
@@ayagroup702 this cable for 8000 , 8100 , 8200, 8300 works with Hp Compaq 6300 pro Mt ? Thanks
Work?
Hello, i have an HP EliteDesk G1 800 Tower, would this product suit it, and does it require any rewiring ?
No rewiring is required for EliteDesk G1 800, will work right away. Thank you!
@@ayagroup702 oh thank you
really i also have the hp 800 tower i have to test this
@@stevengagarin2487 my order is still in transit, once it is delivered, i'll update you
@@johanvonbronx5677 did it work?
Ada yg sudah jd berapa harganya?
Work in hp 6300 pro
Work?
Где взять такой переходник
ru.aliexpress.com/item/32994962267.html?productId=32994962267&productSubject=-&spm=a2g0s.8937460.0.0.16392e0euI8VMD
Ok, I'm officially turning crazy... I've tried all the possible set ups even with the jumper and in the best scenario I used the second one showed on this video, I mean: from Pin#2: Red >Green> Black> Yellow and Pin#1 And #6 with jumper each other, but still doing the same that in my case is: Green led on MB, when I try to turn on, the CPU fan and one other rotates at full speed like crazy but the fan from PSU and Graphic card don't move!
By the way, I've already try to reverse the pins but 4 beeps and red led are the result.
My set up:
HP 8200 Elite Tower with i5-2400
Evga 450BT
And all the possible pin set ups! LOL
Please some help here, I would really appreciate it!
So far, I've installed one of these in 3 out of 4 HP 8200 Elite Convertible Minitowers and I did not have to adjust the pin assignement. I tried adjusting them as the video says and then I get the beeps and no boot. Maybe there is something else wrong on your computer or power supply?
you need a new motherboard
bit.ly/2Df4Qnn
Javier Rodea i had the same problem. Found one of the ground wires to the 6 pin connector was installed in the wrong spot on the 24 pin connector.
So on the 24 pin connector if you have a wire in slot 17, move it to slot 19 in the connector.
@@helieasy Ah man you could be my savior.I have the same problem.Could you show me the config for the ps2 connector and also the 24 pin connector.I have a 8200 sff and as per Amazon they are not the same than 8200 atx.Please heelllp.
How can we help?
I have an HP Elite 8200, I rewired the small connector per your video. My PC will not power up with this adapter installed. I have tried multiple power supplies. Please help!
@@reednethercutt6455 Reverse the pins. Yellow > Black > Green > Red. We discovered that different Elite 8200 has different pin outs.
@@ayagroup702 I reversed the pins, it will power up now. I get the fan error. Any way around that?
Thank you for your help!
@@reednethercutt6455 We're trying to find a way to resolve this. Will update post once we figure out.
@@ayagroup702 Ok that was three month ago. Where's the update ?
Why did you say in your presentation here, : To ask questions, that you will definitely respond."
Umm, well, I see many folks asking you questions, and umm, well, it appears that you are not, well, umm, responding to them. And, umm, well...I'm umm, wonder what the fu## ???
Will this work on 400 g7 i5 10th gen?
Does it work on dell optiplex 5050 ?
Nope, only for HP