Hp have a propriety power supply connector. This is my stupid solution when you want to upgrade your power supply for a good graphics card. It does work well.
A friend made a really neat twin PSU PC a few years ago. As he wasn't running any optical drives he removed the 5.25" cage and mounted the second PSU up there at the front. He hard wired a spur from the original PSU's power socket into the second power supply, and somehow triggered the second one to wake up using a MOSFET. He also replaced the 5.25" bay covers with a perforated alloy plate so the extra psu had somewhere to blow air out of. It all looked very tidy when he finished. The reason for doing all this was because he had a couple of overclocked GTX 980 ti graphics cards SLIed in there, and during heavy gaming that pair would suck up over 500w all by themselves !!! He already had a really good 600w PSU in there, but found the system was getting unstable at the limit, so as he had a spare 450w unit sitting about doing nothing, he decided to just add that. The new PSU ran one 980 and all his RGB, while the original ran the second 980 and everything else. He ran it like that for a couple of years before the lure of newer gaming hardware became too strong. Apparently the only issue he ever had with this setup was the ridicules amount of heat it produced. In summer, after a few hours of gaming, he'd have to open his game room window to let the temperature drop to a barrable level, and in winter he could near as damn it turn the houses heating off. :D
Adapters can get very easy and cheap. If in your area not available, you can make one very easy yourself. Swapped cases and PSU's with these HP motherboard quite few times and it works perfectly. Actually got one of those adapters spare right now, as they are cheap, got one just in case will get another PC swap of this type. :) Also making it work with no error messages or needing to press F1 on startup. Everything is doable.
@@AxeFxMikenot sure on this one. I can see that this board have 24pin connector. Never done one of these before. If original power supply uses 24 pin, then obviously you will be fine with standard PS, if it uses 6pin, then I guess one way to find out is to try using 24pin connection and see if it works.
I've been doing that stupid thing for a year now as main computer (i.e. 2 power supplies) So, now, to turn it on: dedicated video card PSU as #1, then turn on the computer. Reverse order to shut it off. Burns more electricity though - 2 psu's No extra relays needed. MY PSU has a switch on it and and plug on 24 connector to turn it on automatically. Another stupid thing is cutting close cover open so that larger video card can fit into that small factor SSF with a grinder :) I think it looks nice now.
LOL Mate, don't feel alone at all, A month ago I was thinking "Oh yeah, I'll flex on my buddy with a dual socket Windows xp era build, heck yeah, here's a xw-6200 board for like 20$" Little did i know there's the proprietary heatsinks and power supply, and I've now got another lovely money hole ! :D
@@Robonza Hey ¡Glad to know! I just want to thank you a lot because i've learned something new, and also very useful. I have a HP Prodesk 600 g2, wanting to upgrade to a better PSU and GPU and this trick gonna save me a lot of hassle ordering the adapter that costs like 20$ which doesn't sell locally. THANK YOU ¡YOU'RE A GENIUS! ¡BLESSINGS! P.S. just edited my first comment, definately practical. ¡THANKS!
I'm having the same problem and I was thinking the exact same thing to hook a 12 volt relay to one of the 12 volt Hearts coming off that thing and now that I ain't seen your video and know that it works I'm a goddamn genius
Ok here I am again. I did the same thing, however it should be noted that a diode should be placed in reverse bias across the coil terminals of the relay.
Sometimes you need to change the P2 6 pin connector cable position on the adapter for it to work, can't remember exactly which one, but sometimes they put one cable on the wrong position on P2 6 pin connector and it is what makes it faulty. You can find the correct configuration, and switch the little 6 pin (1 cable) to the right configuration(cables position, which should be just a single cable that you need to reposition) and it should work right away.
@@Robonzaplease help I turned off my PC but the other PSU was connected directly to GPU and it was on for long time, now my GPU won't turn on please tell me what happened, it's can be fixing?
Funny thing is I have a hp with a 190 watt psu. Well this is what I did the cpu used 65 watts of power I got a evga gforce gtx 750 ti ftw 2gb card that used 65 watts got a sata power adapter to 4 pin molex to power the card. It runs fine. Lol I play yakuza like a dragon at 30 fps 1080p med settings it's not too bad. Really did not need to do it because I have a ps5 and series x. I did it because it mad me mad.
Genius! -Thank you for sharing. I would like to apply your solution to power a high wattage external GPU connected to an HP Pro 6300 SFF. Do you mind providing some close-ups or explanations of the red & black wire splices, and a part number of the relay you used. Much obliged!
Any old 5v or 12v relay will work. You simply connect it to the 12v or 5v hard drive power depending if you choose a 5v or 12 relay. The relay normally open contacts start the 2nd power supply, just google "atx power supply turn on without motherboard"
@@Robonza Thank you for your response, Sir! Since then, I found out that your Power idea/solution/concept is not only genius, it is also commercialized as this product: "ATX 24Pin to SATA Dual PSU Power Supply Sync Starter Extender Cable Card". When you Google it, the Amazon purchasing option is one of the first to show up, but other companies such as eBay and AliExpress sell these adapters too. The ATX adapter kind with a SATA connection to your PC is the easiest connection, in my opinion.
@@christianviewmont5632 how did you solve your problem I have the exact same pc as yours and I can’t put exchange power supply’s because of that stupid cable
Wouldn’t doing this damage something or short circuit since I have the same issue because I bought a power supply for an rx6600 but the ps won’t work with the motherboard
I really don't understand something from the video because English not my main language but by reading some comments i want to ask something i have hp 800g2 and i know that i can't get anypower supply because the adapter thing so i don't want to waste my money on something that is not going to work so i have a question i just need a power supply for the graphics card so can i get a one and just use it for the graphics card and the case with board and the hard drives and ssd use the other one is that going to be easy like get a Power supply then add a caple to the graphics card then it will work or i need to something specific like cut something and this hard things to make this work? Please answer me
Hey i have xw4600 psu and it dosent support other motherboards because the 24pin is different than usual its missing 3 pins (8,12,23) i want to use this psu for my h81m please how can i modify it
wondering will 2nd power supply fan stay at full power if i short circuit the psu my hp pc also has same issue and im tryng to power a 4060ti so im thinking of doing the same thing using 2ns psu to power gpu only
relay is hooked to the hard drive, hard drive is hooked to the tiny psu and relay at the same time is hooked to the black and green cable of the bigger psu.
Hey, sir, i want to do this modification ¿Could you help me a little? ¿How do i ask for the relay at the store? And last question ¿How do i know where to the solder the cables at the relay? The red + black cable that goes on the relay and the other 2 cables that you soldered, the blue + green ¿How do i know where to solder them? Please, help me just a little. Also ¿Where did you get the little 2 cables that you used to jump the bigger PSU? The blue + green cables, please, please, please, thanks in advance.
Can I put Atx Six pin port of PSu in Motherboard instead of 24 pinto 6 pin atx convertor or there is some difference in 24 pin and six pin atx And 8 pin atx direct to gpu
A friend made a really neat twin PSU PC a few years ago. As he wasn't running any optical drives he removed the 5.25" cage and mounted the second PSU up there at the front. He hard wired a spur from the original PSU's power socket into the second power supply, and somehow triggered the second one to wake up using a MOSFET. He also replaced the 5.25" bay covers with a perforated alloy plate so the extra psu had somewhere to blow air out of. It all looked very tidy when he finished.
The reason for doing all this was because he had a couple of overclocked GTX 980 ti graphics cards SLIed in there, and during heavy gaming that pair would suck up over 500w all by themselves !!! He already had a really good 600w PSU in there, but found the system was getting unstable at the limit, so as he had a spare 450w unit sitting about doing nothing, he decided to just add that. The new PSU ran one 980 and all his RGB, while the original ran the second 980 and everything else.
He ran it like that for a couple of years before the lure of newer gaming hardware became too strong. Apparently the only issue he ever had with this setup was the ridicules amount of heat it produced. In summer, after a few hours of gaming, he'd have to open his game room window to let the temperature drop to a barrable level, and in winter he could near as damn it turn the houses heating off. :D
wow, that sounds really nice. I do that kind of stuff for my equipment. This was my 15 year olds cheap computer haha.
Thanks mate, this saved me a massive headache. Cheers from Canada
I'm changed the PSU on my Z440. I bought the adaptor cables on eBay and it works well. Great job.
Adapters can get very easy and cheap. If in your area not available, you can make one very easy yourself. Swapped cases and PSU's with these HP motherboard quite few times and it works perfectly. Actually got one of those adapters spare right now, as they are cheap, got one just in case will get another PC swap of this type. :) Also making it work with no error messages or needing to press F1 on startup. Everything is doable.
Where can I get the adapter(s)??
¿how make one?
@@Quadromodoyeah
If one uses the xw6200 of all boards, does it absolutely have to have that proprietary power supply with the additional "auxillary" 6 pin cable?
@@AxeFxMikenot sure on this one. I can see that this board have 24pin connector. Never done one of these before. If original power supply uses 24 pin, then obviously you will be fine with standard PS, if it uses 6pin, then I guess one way to find out is to try using 24pin connection and see if it works.
NIce. lol. Im glad my HP prebuilt's MB is ATX standard! I got really lucky in that regard.
what model is it?
I've been doing that stupid thing for a year now as main computer (i.e. 2 power supplies) So, now, to turn it on: dedicated video card PSU as #1, then turn on the computer. Reverse order to shut it off. Burns more electricity though - 2 psu's No extra relays needed. MY PSU has a switch on it and and plug on 24 connector to turn it on automatically. Another stupid thing is cutting close cover open so that larger video card can fit into that small factor SSF with a grinder :) I think it looks nice now.
Haha, nice. They dont really use too much more power as they mostly take what they need e.g. the efficiency rating plus house keeping.
LOL Mate, don't feel alone at all,
A month ago I was thinking "Oh yeah, I'll flex on my buddy with a dual socket Windows xp era build, heck yeah, here's a xw-6200 board for like 20$"
Little did i know there's the proprietary heatsinks and power supply, and I've now got another lovely money hole ! :D
haha, nice
It doesn't seem stupid to me, quite frankly, its just not "aesthethic", but 100% functional and practical.
Thanks for the comment. my son is still enjoying this PC 2 year later. so definitely practical. Saved me spending big on a whole new desktop
@@Robonza Hey ¡Glad to know! I just want to thank you a lot because i've learned something new, and also very useful. I have a HP Prodesk 600 g2, wanting to upgrade to a better PSU and GPU and this trick gonna save me a lot of hassle ordering the adapter that costs like 20$ which doesn't sell locally. THANK YOU ¡YOU'RE A GENIUS! ¡BLESSINGS!
P.S. just edited my first comment, definately practical. ¡THANKS!
I'm having the same problem and I was thinking the exact same thing to hook a 12 volt relay to one of the 12 volt Hearts coming off that thing and now that I ain't seen your video and know that it works I'm a goddamn genius
that's what i thought, genius.
Ok here I am again. I did the same thing, however it should be noted that a diode should be placed in reverse bias across the coil terminals of the relay.
Good advice. The relay I used had an integral diode. Prolly not needed but a good precaution
Think I'll just do this, I can't get any adapter working either, bloody HP
Yeah, its still running strong today
Sometimes you need to change the P2 6 pin connector cable position on the adapter for it to work, can't remember exactly which one, but sometimes they put one cable on the wrong position on P2 6 pin connector and it is what makes it faulty. You can find the correct configuration, and switch the little 6 pin (1 cable) to the right configuration(cables position, which should be just a single cable that you need to reposition) and it should work right away.
@@Robonzaplease help I turned off my PC but the other PSU was connected directly to GPU and it was on for long time, now my GPU won't turn on please tell me what happened, it's can be fixing?
Funny thing is I have a hp with a 190 watt psu. Well this is what I did the cpu used 65 watts of power I got a evga gforce gtx 750 ti ftw 2gb card that used 65 watts got a sata power adapter to 4 pin molex to power the card. It runs fine. Lol I play yakuza like a dragon at 30 fps 1080p med settings it's not too bad. Really did not need to do it because I have a ps5 and series x. I did it because it mad me mad.
I have problems with the hp elitedesk 800 g3 help
Was trying to connect normal psu to a z400 but I have a diagram hoping this mod will work
Can i attach 24 pin to 6pin cable for hp pro 6300 compaq?
SMART!!!
I go so many market but I can't found smps
Genius! -Thank you for sharing. I would like to apply your solution to power a high wattage external GPU connected to an HP Pro 6300 SFF. Do you mind providing some close-ups or explanations of the red & black wire splices, and a part number of the relay you used. Much obliged!
Any old 5v or 12v relay will work. You simply connect it to the 12v or 5v hard drive power depending if you choose a 5v or 12 relay. The relay normally open contacts start the 2nd power supply, just google "atx power supply turn on without motherboard"
@@Robonza Thank you for your response, Sir! Since then, I found out that your Power idea/solution/concept is not only genius, it is also commercialized as this product: "ATX 24Pin to SATA Dual PSU Power Supply Sync Starter Extender Cable Card". When you Google it, the Amazon purchasing option is one of the first to show up, but other companies such as eBay and AliExpress sell these adapters too. The ATX adapter kind with a SATA connection to your PC is the easiest connection, in my opinion.
@@christianviewmont5632 how did you solve your problem I have the exact same pc as yours and I can’t put exchange power supply’s because of that stupid cable
Its not stupid if it works!
Haha, yeah 3 years later and my son is still using it.
Wouldn’t doing this damage something or short circuit since I have the same issue because I bought a power supply for an rx6600 but the ps won’t work with the motherboard
I really don't understand something from the video because English not my main language but by reading some comments i want to ask something i have hp 800g2 and i know that i can't get anypower supply because the adapter thing so i don't want to waste my money on something that is not going to work so i have a question i just need a power supply for the graphics card so can i get a one and just use it for the graphics card and the case with board and the hard drives and ssd use the other one is that going to be easy like get a Power supply then add a caple to the graphics card then it will work or i need to something specific like cut something and this hard things to make this work? Please answer me
That or iust buy the 6.00 adapter
How did you hook up the relay exactly
Ask anyone who knows the real basics and they will show you.
Hey i have xw4600 psu and it dosent support other motherboards because the 24pin is different than usual its missing 3 pins (8,12,23) i want to use this psu for my h81m please how can i modify it
wondering will 2nd power supply fan stay at full power if i short circuit the psu my hp pc also has same issue and im tryng to power a 4060ti so im thinking of doing the same thing using 2ns psu to power gpu only
The psu fans will normally do the cooling they need, But dont short circuit shit unless you trying to make smoke
@@Robonza so all i do is green wire with black wire psu turns on and plug it in to gpu nice and simple
Where does the 2ng psu get it's power? It's not hooked on to any power source.
relay is hooked to the hard drive, hard drive is hooked to the tiny psu and relay at the same time is hooked to the black and green cable of the bigger psu.
Hey, sir, i want to do this modification ¿Could you help me a little? ¿How do i ask for the relay at the store? And last question ¿How do i know where to the solder the cables at the relay? The red + black cable that goes on the relay and the other 2 cables that you soldered, the blue + green ¿How do i know where to solder them? Please, help me just a little. Also ¿Where did you get the little 2 cables that you used to jump the bigger PSU? The blue + green cables, please, please, please, thanks in advance.
See if you find a local makerspace or Arduino club. A lot of people there would tell you how to do it and give you the relay for free
what does the relay do?
Can I put Atx Six pin port of PSu in Motherboard instead of 24 pinto 6 pin atx convertor or there is some difference in 24 pin and six pin atx
And 8 pin atx direct to gpu
Plz reply fast
@@sonugammer1356do you know now?
does it also work for powering it down or just turning it on?
It relays on the old psu, which we could call "the main psu" so, whenever the main psu turns off, then the bigger one should do too.
u a kiwi brother ?
yeah mate!
😂😂😂😂 I'll do the same