Use This for Your lab | 24V 12V 5V 3.3V | Computer ATX Power supply

Поделиться
HTML-код
  • Опубликовано: 11 окт 2024
  • Hi friends in this video i will show how can you use a Computer power supply as a Lab branch power supply frist you need to found a green wair and you must connect it to ground and the fan starts spining it means the voltage are available for use
    you will get
    Out put voltage
     24V 4A Max ⚠️
     12V 15A ⚠️
     5V 32A ⚠️
     3.3V 35A ⚠️
     Input Voltage 110V to 230V ⚠️
     Watt 400WATT ⚠️
    View all
    ➡️ • Use Old ATX Power Supp...
    my Other Videos
    ➡️ • Lithium 18650 Battery ...
    Description ✅
    A power supply unit converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies. Some power supplies have a manual switch for selecting input voltage, while others automatically adapt to the mains voltage
    Most modern computer power supplies follow the ATX convention: They output +3.3V, +5V, +12V and -12V on a series of color coded wires. Computer power supplies have a number of safety features that help to protect you and the power supply itself.
    ⚠️tags ⚠️
    #LabPowerSupply #smps
    #12V
    #5V
    #PowerSupply
    #Howtomake
    #25V
    #AdjustablePowerSupply
    #PowerSupply
    #powersupplyforlab
    high voltage
    atx 12v 24v 35v bench power supply +12v atx power supply best power supply diy power supply variable power supply diy lab bench power supply adjustable power supply dc power supply lab power supply variable lab bench power supply low cost power supply 12v power supply laboratory power supply diy bench power supply

Комментарии • 233

  • @Electronic_For_You
    @Electronic_For_You  Год назад +4

    Clear and HD version of this video Watch here
    👇👇👇👇👇👇👇👇👇
    ruclips.net/video/3Olq0Yl-VDc/видео.html

    • @YouVance-oy4ki
      @YouVance-oy4ki Год назад

      Do your best to not kill yourself using loose cables on the psu input :)

  • @CatJBL
    @CatJBL 2 года назад +9

    UPDATE: I finally got the computer power supply. My car amp and speakers was rattling like crazy. And the speakers were walking around lol. This guy is a legend, I am subscribing and liking!

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +4

      😄♥️
      Its better then most Powersupply and also very reliable good one can give up to 400W

    • @CatJBL
      @CatJBL 2 года назад +2

      @@Electronic_For_You I have a Coolmax I-400. It works perfectly.

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +5

      Good one

    • @terrysookhoo2528
      @terrysookhoo2528 10 месяцев назад

      Lol theses power supply not stable for car aduio

  • @CatJBL
    @CatJBL 2 года назад +1

    When my computer stops working. I will turn it into a bench power supply for my audio system until it breaks my windows 🤣🤣 Nice Idea!

  • @ahmedace4911
    @ahmedace4911 2 года назад +1

    Thank u man
    Step by step, clear explanation, checking...
    You are the best

  • @akshayharidas7544
    @akshayharidas7544 2 месяца назад

    Have a doubt, +12 volt and -12 volt to 24 volt.. can you please explain the technical side... and after getting 24 volt how the higher rating of +12 volt 15amp and -12 volt .3 a goes to 2A.

    • @Electronic_For_You
      @Electronic_For_You  2 месяца назад

      There is 3Amps diodes used on -12V side so , 2 amps can be taken

  • @umutturan4751
    @umutturan4751 4 месяца назад

    is it possible to take 14.4v with this psu, which wires combine needs? or what else need additional....?

    • @Electronic_For_You
      @Electronic_For_You  4 месяца назад

      Not possible, it's ,12v only ,
      But you can modify it , I have video

  • @volkanislek
    @volkanislek 3 года назад +5

    which one is logical;
    1. to use fuse before 220V power switch
    2. to use fuses before each outputs (3.3, 5, 12v etc)

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +7

      Fuses are not needed
      Because it has short circuit protection 🙂

    • @toridmad9479
      @toridmad9479 3 года назад +4

      @@Electronic_For_You
      Right 🤣

  • @ezyjack826
    @ezyjack826 2 года назад +1

    I have a DC pump that I use for pumping oil. do you think I could use a computer power supply to run it? I figured since it hooks up to my 12v battery that it might work with the 12v power supply. it uses 13.5 amp. I have an old AT power supply that I want to try. it has an external on/off switch with a white, blue, brown and of course black for ground. wire harness has Black (ground), Yellow (12V), Red (5V), Orange (Power Good), Blue (-12V) and White (-5V) I believe. does this sound correct? do I need to put in resistors for an AT power supply? ty for your assistance. 🙂

  • @MechanicForGMCCars
    @MechanicForGMCCars 2 года назад

    Sir is it posibel to modify power suply to use baterry power instead of chargeing it ? Ore converting power suply to inverter?

  • @blowingchannel4424
    @blowingchannel4424 2 года назад

    Nice. Tried this with my PSU, all voltages are present. Thank you.

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Welcome
      Please do not open the cover
      High voltage Inside ..... dangerous
      Happy new year 😃❤️

    • @blowingchannel4424
      @blowingchannel4424 2 года назад

      @@Electronic_For_You Yes, don't worry i wont open it. Happy new year too!

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      ❤️

  • @officialrmb6088
    @officialrmb6088 3 года назад +3

    So only blue wire + yellow wire can output high power(20~4V) , right?

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +2

      No You are wrong only Yellow (12V) wire can give as much as 25A or 30A but Blue (-12) can give 1A but if You take one Yellow and one blue You can draw more then 3A Good one 4A

    • @paddajunior744
      @paddajunior744 3 года назад

      @@Electronic_For_You why does my PSU cut off when I connect 12v Yellow and Blue( both from the 24 pin plug. Please explain how I should bridge them to get 24v. Thank you.

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +1

      Your PSU Turn off because
      It drowing too much ampere
      From Blue wair .....!

  • @paddajunior744
    @paddajunior744 3 года назад +5

    Why does my PSU cut off when I connect 12v Yellow and Blue( both from the 24 pin plug. Please explain how I should bridge them to get 24v. Thank you.

    • @kristourangeau6572
      @kristourangeau6572 2 года назад +1

      You don’t connect the yellow and blue together…connect the yellow (positive) and connect the blue as a ground (negative). That will get you 24v

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +3

      yeas
      Blue is - l2v and yellow is +
      So 25V

    • @alexvelez9910
      @alexvelez9910 6 месяцев назад

      @@kristourangeau6572 And what would be the maximum amperage it could handle?

    • @Electronic_For_You
      @Electronic_For_You  6 месяцев назад +1

      2A 25V

  • @realsliemoar
    @realsliemoar Год назад

    How did you get 17A?, me trying to combine yellow and black only got 0.3 amps.

    • @Electronic_For_You
      @Electronic_For_You  Год назад

      🤔
      Add a 5 ohm 5W resistor to 5V line maybe loading the Powersupply works

  • @yogendrachoudhary6973
    @yogendrachoudhary6973 Год назад +1

    Can I get 12v 15 amp in black and yellow wire
    I am confused in ampere
    Situation 1 :- I have module of 12v 6 ampere
    Situation 2 :- I have 2 module of 12 v 6 ampere
    Bro in both situation can I attach black and yellow wire
    Please bro reply

  • @mihaiionascu6001
    @mihaiionascu6001 Год назад

    Hi, can i use a power suply for a Project with arduino mega, for exemple:
    I want to power al sensor that need 5v from 1 ( 2 Dallas 18b20 sensors, 2 SSR relay, 2 Leds, 1x4 Matrix Buttons, 1 Lcd), without damaging sensors or arduino itself for power them up.
    The Power Suply give them exactly how much curent they need or constant 2, 3 4 ...10 A ???
    12V for 1 brushless motor (1.34 A)
    1 motor 12 v, 034A
    12V for Heating element (200w)
    Thank You!

    • @Electronic_For_You
      @Electronic_For_You  Год назад

      You can see there is labeled side there is written the maximum current . You should not exceed that current.

  • @budisugiawan8187
    @budisugiawan8187 Год назад

    battery 12v 40a which cable can use? how long does it take to get full. Thx u

    • @Electronic_For_You
      @Electronic_For_You  Год назад

      Use
      Yellow+
      And
      Black -
      Use a 500W Chinese Boost converter to increase the voltage to 14V then charge the battery 1 hour

  • @Turist.1
    @Turist.1 Год назад

    👉👉ALL THE VOLTAGE IS THIS: clasic 12V, 5V, 3V. ---AND: >>24V blue/yellow+, >>16V blue/red+, >>6V blue/white+, >>14V blue/orange+, >>10V white/red+ , >>18V white/yellow+, >>8V white/orange+

  • @darwinllanes8180
    @darwinllanes8180 4 месяца назад

    How do i run a 12v 10amp water pump motor? What color of wire i need.

    • @Electronic_For_You
      @Electronic_For_You  4 месяца назад +1

      Black - Ground
      Yellow + 12V
      Use a freewheeling diode will motor

    • @darwinllanes8180
      @darwinllanes8180 4 месяца назад

      What kind of diode will i use. What amp do i need.

  • @asifrabbanikhanpathan8432
    @asifrabbanikhanpathan8432 2 года назад

    Can I use smps to power four nema 23 stepper which requires 3A...
    Four nema 23 stepper motor requires around 12A...
    If so then which wire should I go for?
    Thank you...

  • @sergiocastillo2243
    @sergiocastillo2243 2 года назад +1

    Del cable rojo (positivo), y el cable negro (tierra) que es lo que está conectado para el funcionamiento del motor, salen solo +5V 32A; esto de acuerdo con la tabla de descripción de la fuente.
    No son 12V 15A como dice el subtítulo.

  • @jayantkumawat2017
    @jayantkumawat2017 2 года назад +1

    My SMPC is completely damaged and my Monitor was also getting power supply from those only.....So, how to get my display working or any power adaptor present otherwise whole monitor will be use less

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +1

      Check is there any 220v/110v ac Input on monitor?

    • @jayantkumawat2017
      @jayantkumawat2017 2 года назад

      Can I share you picture somewhere

    • @jayantkumawat2017
      @jayantkumawat2017 2 года назад

      SMPC fan is also not responding i think it is damage

    • @jayantkumawat2017
      @jayantkumawat2017 2 года назад

      In my monitor thier is one HDMI cable and one cable is Adaptor which was connected to SMPC its of 220v

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      led monitor?
      And please check if there any stickers that say some Voltage rating. Back of monitor

  • @TennisReddy
    @TennisReddy 11 месяцев назад

    any way to power on the PSU using 12v DC input or any DC input voltage instead of AC

    • @Electronic_For_You
      @Electronic_For_You  11 месяцев назад

      No
      Its not possible to power it from 12V but you can use 200V DC

    • @TennisReddy
      @TennisReddy 11 месяцев назад

      @@Electronic_For_You could you recommend any PSU which operates on 200V DC

    • @Electronic_For_You
      @Electronic_For_You  11 месяцев назад

      What do you want to power?
      Computer? I recommend using an inverter!

  • @nitinkuma1925
    @nitinkuma1925 Месяц назад

    12v battery charge kar sakte hain kya haam isse se

  • @mdhyderalikhan8725
    @mdhyderalikhan8725 Год назад

    Hello brother
    Thanks for uploading this video its very informative but can u please tell me which power connector should i use to power ssd with 5v

    • @Electronic_For_You
      @Electronic_For_You  Год назад +2

      5V Is Red + and Black Minus -

    • @mdhyderalikhan8725
      @mdhyderalikhan8725 Год назад

      @@Electronic_For_You i mean a power connector
      Will it b okay if i connect it to my new ssd

    • @Electronic_For_You
      @Electronic_For_You  Год назад +1

      Hi
      This might help you !
      www.google.com/imgres?imgurl=https%3A%2F%2Fwww.alphr.com%2Fwp-content%2Fuploads%2F2016%2F01%2Fsata-ssd-connections.jpg&imgrefurl=https%3A%2F%2Fwww.alphr.com%2Ffeatures%2F378925%2Fhow-to-install-a-ssd%2F&tbnid=dCHh_7S5gOCghM&vet=1&docid=WTzkdH48zeEPlM&w=1601&h=900&source=sh%2Fx%2Fim

    • @mdhyderalikhan8725
      @mdhyderalikhan8725 Год назад

      @@Electronic_For_You thnks bro i got my ssd dlivrd ystrday its wrking fine now

    • @Electronic_For_You
      @Electronic_For_You  Год назад +1

      I'm happy to help you
      Have a nice day ! ♥️

  • @catgarong6864
    @catgarong6864 2 года назад +1

    If +12v join with +5v and -12v join -5v can output 17v? If work how many amp output?

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +1

      +12v and -12v = 25v 2A
      +5v and -5v = 10v 2A

    • @catgarong6864
      @catgarong6864 2 года назад

      @@Electronic_For_You how i can 24v 5amps?

    • @yordanmitev2720
      @yordanmitev2720 2 года назад +2

      @@catgarong6864 no way with this power supply -12v is 0.5A this the max (Amps) if you use -12v or -5v

  • @Ashish089
    @Ashish089 Год назад

    Can you tell how much amp I got if I connect +12v and -12v to get 24 volt
    Plz

  • @dylanmacapagal1009
    @dylanmacapagal1009 Год назад

    I need 12v 15a or more. What color should I use?

  • @MangoKingMangoshake-wl4uo
    @MangoKingMangoshake-wl4uo Год назад

    SMPS ka 12 volt 15 ampere output Kaun wala wala se nikala hai please reply me

  • @CVLawmpuia
    @CVLawmpuia Год назад

    I try to use 12 volt to run 775 motor. But it potential ( tongue) only look like around 6 to 10 ampere although it showed 24Ampere

  • @william254
    @william254 2 года назад

    Do I need the fan spinning? I'm only using the 5v

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Fan spin automatically
      Red and Black is 5V and current is written on your psu

  • @zakawaka3752
    @zakawaka3752 2 года назад

    Mine one turning on and then going off after connecting black and green wire and their is a pg wire is it nessery to connect it to motherboard

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      You can put a dummy load on 12v line that may works .... Because some psu need to be loaded before start . Use a 5W 10 ohm or 3.3 ohm at 5v line

  • @amabonds
    @amabonds 2 года назад

    +12 and +3 together will give ?

  • @wolverine4208
    @wolverine4208 Год назад

    Brother! How can i get 2 12 volt out put of 2 or 3 amper and one ground (earh vire) for my audio system? Please guide. I actually need 35 +35 watt and a single ground piont for my 1047 model amplifier .

    • @Electronic_For_You
      @Electronic_For_You  Год назад

      You can use
      Yellow
      +12V
      Black
      0V
      blue
      -12V

    • @wolverine4208
      @wolverine4208 Год назад

      @@Electronic_For_You i have 186 watt max psu. Will this work for it. And the formula above will work? I mean if i take yellow and blue, would the supply be able to transfer 2-3 ampair at both sides?

    • @Electronic_For_You
      @Electronic_For_You  Год назад

      Yeas
      But blue can give maximum 2A

    • @wolverine4208
      @wolverine4208 Год назад

      @@Electronic_For_You and what about yellow? I mean maximum range? If blue is 2amp at maximum that means about 25 watt. And i need 35watt at both stereo sides if one of them gives lower supply this will reduce sound quality! So what shoud i do to attend needed power?

    • @wolverine4208
      @wolverine4208 Год назад

      @@Electronic_For_You Don't want to bother you but i need help here so please don't ignore...
      I have an amplifier having 2sc5200 transistors. Its a stereotype board and needs 25+ground+25volts . How to get this power from psu. Seller recommend 10 ampair transformer and i don't want to spend alot money. I got a psu so just guide me in this case..

  • @rhealynarzaga8822
    @rhealynarzaga8822 2 года назад

    I need 12v/15 amps.i uses the black and yellow wire but after i switch it ON the power supply suddenly cut off.what should i do?

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      It seems that your load drow inrush current more then 30A for A second so over current protection kick in ..... What load you have attached?

    • @shubhamsawant5129
      @shubhamsawant5129 2 года назад

      If i m right, you need to short green and black

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Yeas if you not short green and black the power supply will not start

  • @jhongonzalez1514
    @jhongonzalez1514 3 месяца назад

    Puedo hacerlo de 12v 7amp?

  • @william254
    @william254 2 года назад

    Can I add the 12v together to get 24v??

  • @VinaySinghBliss
    @VinaySinghBliss 2 года назад

    Can I join +3.5, +5.0, +12.0 and get 20.5V at least 10 amps of current.?

  • @James-qw7hp
    @James-qw7hp 2 года назад +1

    Nice

  • @aloksupertips
    @aloksupertips 2 года назад

    Can i connect pixel light use 5v please answer

  • @lavague7648
    @lavague7648 2 года назад +1

    Hello what is the maximum current at 24v?

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      2-4A
      Many only give 2A

    • @yordanmitev2720
      @yordanmitev2720 2 года назад +1

      0.5A see -12v if you load more will stop for security reasons

    • @lavague7648
      @lavague7648 2 года назад

      @@Electronic_For_You Strange the psu says that can give till 15a at 12 volt. I guess this is not constant. I run a dc motor with such a psu at 2 amper constant current and i am happy with this. When the motor stahl and takes much current the psu shut downs. After 20 minutes starts again.

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      🤔

    • @yordanmitev2720
      @yordanmitev2720 2 года назад

      @@lavague7648 if you want to run the motor with no load... use a starting capacitor. But if it takes 2A without load, then when you loaded , will take much more. According to the load, it can reach 40A or 50A depending on the motor and the load. if you want to use for fan is ok use capacitor and run, but for example for cordless drill☝️40A or 50A

  • @amitghosh6966
    @amitghosh6966 Год назад

    24 Volt Ampere will be very less as -12 volt has only 500 mA

    • @Electronic_For_You
      @Electronic_For_You  Год назад +1

      Yeas
      I got maximum 2A
      4A for short time but the diodes will explode

  • @yasirarham7948
    @yasirarham7948 2 года назад

    Aoa.
    Bhai is me sy ham (12 volt or 2 amp)
    Kesy le sakty hai.

  • @anilkumarjangapelly8267
    @anilkumarjangapelly8267 2 года назад

    Brother it's smps 12v 20amps available ? Use for car amplifier

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Yeas
      But you need to give 220V to get 12V

    • @dethamandiri7373
      @dethamandiri7373 2 года назад

      @@Electronic_For_You how to get 12v 20a to power up dinamo 775...?? Thx for u explntion..🙏

  • @Trollstube
    @Trollstube 5 месяцев назад

    How can i get 5v with 10 + ampere

  • @ontherealm3898
    @ontherealm3898 2 года назад

    Hi can u tell me link this power supply this looks good to my PC and I will subscribe

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      This Powersupply is Not good,
      Buy more expensive one .....! This type of psu can blow up your pc

    • @ontherealm3898
      @ontherealm3898 2 года назад

      Ok thanks

  • @peterfrancis3865
    @peterfrancis3865 3 года назад

    Black ground and green start the fan
    So i can connect a 12 volt DC bulb to black ground and +yellow

  • @nickmar6137
    @nickmar6137 11 месяцев назад

    13,8v ?

  • @nikolaavramov43
    @nikolaavramov43 2 года назад

  • @tusharsokhi5404
    @tusharsokhi5404 3 года назад +1

    12v 15a output kaise milega please reply

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +1

      You can use Yellow and Black wair
      They can give 12V 30A

    • @numanahmed8888
      @numanahmed8888 3 года назад

      @@Electronic_For_You 12/120 a.h battery hogaa? Kithna time lagega full char?

    • @yordanmitev2720
      @yordanmitev2720 2 года назад

      @@numanahmed8888 car battery no

    • @danielpedrozaadan5380
      @danielpedrozaadan5380 Год назад

      ​@@Electronic_For_You como es que consigues los 30A?

  • @MonArch_Zodina
    @MonArch_Zodina 4 месяца назад

    I need 24v 10amps??

    • @Electronic_For_You
      @Electronic_For_You  4 месяца назад +1

      24V 2A
      You have to use a boost converter on 12V line to get 24V and upto 10A

  • @xitizbhatta6970
    @xitizbhatta6970 2 года назад

    How do i get 12v & 3A ya 4A ? For motor

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Yellow + black - 12V
      20A

    • @xitizbhatta6970
      @xitizbhatta6970 2 года назад

      @@Electronic_For_You vhaiijaan 20A nhi 3.75A chaiye

    • @xitizbhatta6970
      @xitizbhatta6970 2 года назад

      Motor jalega kya 12v 20A se

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      No problem 👍
      Motor will run perfectly

    • @xitizbhatta6970
      @xitizbhatta6970 2 года назад

      @@Electronic_For_You vhai ek doubt hua
      Wo apne jo 4:45 mai liye ho na usme yellow (+) black( -) mai konsa black hai wo yellowki side ka aur redki sideka...plz batadena

  • @mohsenjamshidpour3514
    @mohsenjamshidpour3514 Год назад

    Hello.how are you

  • @alsemi-back-up579
    @alsemi-back-up579 Год назад

    YOU NEED A BETTER CAMERA THAT FOCUSES PROPLY!!!!!!!!!!!!!
    HARD ON EYES!!!!!!!!

  • @oscarbarrantes5090
    @oscarbarrantes5090 2 года назад

    Conecte el verde y el negro y no encendido el fan

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Bro
      I think you have a bad Powersupply please try with another one

  • @tesstickle1182
    @tesstickle1182 2 года назад

    can i take 24v 5or 10 amp?

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      No
      24v is 2A

    • @yordanmitev2720
      @yordanmitev2720 2 года назад

      @@Electronic_For_You how is 2A when -12v is 0.5A no way will stop

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      I tasted and it gives maximum 4A But there are 3A diode at -12V so you can get 2A from - and + rails of 12V

    • @yordanmitev2720
      @yordanmitev2720 2 года назад

      @@Electronic_For_You i have to this power supply and before 2 day i test to bro but max is 0.5A -12v when i put more is shutdown 😊

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Not all Powersupply is same ....
      I'm not lieying 🙄

  • @16BITMEME
    @16BITMEME 3 года назад +2

    But why 25A At 2A

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +2

      - 12V is Not used much in Computer hardware so -12V has 0.5A But it can give 2A

    • @16BITMEME
      @16BITMEME 3 года назад +2

      @@Electronic_For_You
      😏 yeah

  • @ritingupta4132
    @ritingupta4132 2 года назад

    Bro kya smps se 24v 0.25 amp nikalne possible h

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +1

      Yeas
      Yellow+ and blue -
      24V 2A out

    • @ritingupta4132
      @ritingupta4132 2 года назад +1

      @@Electronic_For_You bro but need only 0. 25 amp just for another 24v fan running purpose so that it not burn

    • @ritingupta4132
      @ritingupta4132 2 года назад +1

      Pls hlp think

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Use Molex connectors Yellow and black. and use
      XL6009 boost converter set it to 24V ....

    • @ritingupta4132
      @ritingupta4132 2 года назад +1

      @@Electronic_For_You is another possible way only from smps either by open it

  • @crazyhacksmalayalm4344
    @crazyhacksmalayalm4344 2 года назад

    But +12 have 15amp so 24v have 15 a yes or no

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      24v has 2A only

    • @crazyhacksmalayalm4344
      @crazyhacksmalayalm4344 2 года назад

      @@Electronic_For_You why

    • @Electronic_For_You
      @Electronic_For_You  2 года назад

      Pc don't need 24v that much

    • @yordanmitev2720
      @yordanmitev2720 2 года назад

      @@crazyhacksmalayalm4344 24v will give you 0.5A no more because -12v is 0.5A and for security reasons to not burn is shutdown see label to up there write all.

  • @roberthudacek
    @roberthudacek 2 года назад

    Áno ( modrý a žltý drôt ) je to staré asi tak 15 rokov , ale iba 0,5 A !!!!!

  • @gilrayos7240
    @gilrayos7240 2 года назад

    pde ba gamitin yan s power amp n 12volts.

  • @terrysookhoo2528
    @terrysookhoo2528 10 месяцев назад

    Y 5volts dc have so much current

    • @Electronic_For_You
      @Electronic_For_You  10 месяцев назад +1

      Different, powerSupply have different current ratings,

    • @terrysookhoo2528
      @terrysookhoo2528 10 месяцев назад

      @@Electronic_For_You yess bt 5volts jus to turn on n of with all that current

    • @Electronic_For_You
      @Electronic_For_You  10 месяцев назад

      I didn't understand what you mean

  • @agadirgym_
    @agadirgym_ 2 года назад

    wow

  • @gilrayos7240
    @gilrayos7240 2 года назад

    pde ba mgamit yan s ampli n 12volts

  • @chavita7421
    @chavita7421 2 года назад

    Can some body tell me why my pc power supply doesn’t have the green cable?

  • @soulbrothers7789
    @soulbrothers7789 12 дней назад

    No way 32 amps from 5 volts 😂😂😂😂

    • @Electronic_For_You
      @Electronic_For_You  12 дней назад

      Why not?
      It's only 160W = 5V@32Amps

    • @soulbrothers7789
      @soulbrothers7789 12 дней назад

      @Electronic_For_You Do you even know what cables would be for 32 Amps ? Fuse of 25A will be blown if this have 32A.
      Top 5A

    • @Electronic_For_You
      @Electronic_For_You  12 дней назад

      You think there is only one cable for 32Amps? 🤣

  • @mr.anonymous5498
    @mr.anonymous5498 2 года назад

    24v ??????

  • @fasihzafar7423
    @fasihzafar7423 2 года назад

    24 volt ?????

  • @roberthudacek
    @roberthudacek 2 года назад

    24 V???

  • @safetysecond55
    @safetysecond55 3 года назад

    Wow but i have 200W one

    • @Electronic_For_You
      @Electronic_For_You  3 года назад +1

      200W is Enough....!

    • @esterlagendijk3044
      @esterlagendijk3044 3 года назад

      Hell no it isn’t

    • @DeanTheDoctor
      @DeanTheDoctor 2 года назад

      They do work more reliably than some of the 12v power supplies available online, and are often more power dense. So depending on your usage, that is a lot of power. 😊🌎🌄

    • @Electronic_For_You
      @Electronic_For_You  2 года назад +1

      Yeas and it also very cheap
      I get it for just 1$ From local Junk Store 😇