This is the most visual guide I could find on this repair. Thanks. I speak no Spanish at all, but with the way these videos are created, I won’t need to! Still have to do the job, but I will give another feedback once I have done it. I guess I will try to use „JB Weld“ as glue on the Rotor. Any opinion against that?
@@charlythouvenot1746 I put more comments to the other parts. I played like 4 months without any issues. Upgraded to more expensive wheel with more feedback then. It will probably work fine still.
Absolutely worth it. If you have a go: It is important to remove all the glue. I left a bit and tried to „slam“ the rotor out of the motor. The magnet didn’t like that. After I removed the last glue (with snips I think it is called) the rotor came out. Clean a bit and glue back in with a good 2K glue. Let us know about your experience. :) The hardest part was really to wait for the announced curing time of the 2k glue (at least 15 hours in my case).
@@marcianzero_yt i've done it yesterday evening, and this morning i've tried it! It was a success, for approximatively 5min only! After that the problem was a broken hall sensor! Just the plastic part that holds the little sensor and pcb card in place...i've made a repair and it works again. Hope that this repair will last But a big thanks from France to the author of those vids😉
Hola Javier como estás? Espero todo bien. Una consulta,tengo un volante thrusmaster Ferrari F1 y de un momento a otro no quiere calibrar. Y trate en la compu con el programa pero no hace nada. Que será. Te agradezco si me das una mano. Gracias!
Buenas amigo,hice todo lo que dice en tu vídeo,ahora al momento de calibrar ,se queda una sola posición dando golpe hacia la derecha y no termina de girar todo para que reconozca,que será amigo ? Me puedes ayudar
Hola hermano! Me gustaría saber si este tutorial resuelve mi problema: mi problema es que cuando estoy jugando en plena carrera el volante pierde el centrado y se gira hacia un lado descordinando la dirección totalmente y actualmente también tengo el problema que al conectarlo gira mas fuerte a un lado que al otro lado y no queda centrado del todo. Espero que me puedas ayudar, ya que no tengo como devolverlo y es prácticamente recién comprado. Saludos
hice exactamente lo de los videos y se soluciono, no es muy difícil pero tienes que seguir los pasos de los 3 videos y trata de marcar la posición exacta de la correa o tambien puedes calibrarlo moviendo los dientes de la correa cuando lo termines de armar
@@MyJLGB hola. Tu tenías el problema ese de que de descalibraba en pleno juego, sobre todo cuando se hacía un poco de fuerza o de chocaba con un muro, aunque fuera despacio? Es que no quiero liarme a desmontar todo para que no sea esta la solución. Saludos
Gracias por el tutorial. Excelente trabajo
This is the most visual guide I could find on this repair. Thanks. I speak no Spanish at all, but with the way these videos are created, I won’t need to! Still have to do the job, but I will give another feedback once I have done it. I guess I will try to use „JB Weld“ as glue on the Rotor. Any opinion against that?
So another feedback?
@@charlythouvenot1746 I put more comments to the other parts. I played like 4 months without any issues. Upgraded to more expensive wheel with more feedback then.
It will probably work fine still.
@@marcianzero_yt thank you...so i have to do this too...my 300rs should have the same problem
Absolutely worth it. If you have a go: It is important to remove all the glue. I left a bit and tried to „slam“ the rotor out of the motor. The magnet didn’t like that. After I removed the last glue (with snips I think it is called) the rotor came out. Clean a bit and glue back in with a good 2K glue. Let us know about your experience. :)
The hardest part was really to wait for the announced curing time of the 2k glue (at least 15 hours in my case).
@@marcianzero_yt i've done it yesterday evening, and this morning i've tried it! It was a success, for approximatively 5min only!
After that the problem was a broken hall sensor! Just the plastic part that holds the little sensor and pcb card in place...i've made a repair and it works again. Hope that this repair will last
But a big thanks from France to the author of those vids😉
Hola javier, una pregunta. Para que sirven los cables que salen en el frente de la base, los que están tapados por la pieza redonda. Gracias
Eso quisiera saber yo sabes de que es ? Porque yo todavía no
Hola Javier como estás? Espero todo bien. Una consulta,tengo un volante thrusmaster Ferrari F1 y de un momento a otro no quiere calibrar. Y trate en la compu con el programa pero no hace nada. Que será. Te agradezco si me das una mano. Gracias!
Hola javier tengo ese problema de fuerza en mi volante de donde eres
Buenas amigo,hice todo lo que dice en tu vídeo,ahora al momento de calibrar ,se queda una sola posición dando golpe hacia la derecha y no termina de girar todo para que reconozca,que será amigo ? Me puedes ayudar
Hola hermano! Me gustaría saber si este tutorial resuelve mi problema: mi problema es que cuando estoy jugando en plena carrera el volante pierde el centrado y se gira hacia un lado descordinando la dirección totalmente y actualmente también tengo el problema que al conectarlo gira mas fuerte a un lado que al otro lado y no queda centrado del todo.
Espero que me puedas ayudar, ya que no tengo como devolverlo y es prácticamente recién comprado. Saludos
Holaaa me pasa lo mismo ya encontraste como solucionarlo yo tengo el thrustmaster t80 y me pasa igual lo de que gira solo sin tocar el volante
Holaa, tengo exactamente el mismo problema y tampoco puedo acudir a garantía. Encontraste alguna solución?
hice exactamente lo de los videos y se soluciono, no es muy difícil pero tienes que seguir los pasos de los 3 videos y trata de marcar la posición exacta de la correa o tambien puedes calibrarlo moviendo los dientes de la correa cuando lo termines de armar
@@MyJLGB hola. Tu tenías el problema ese de que de descalibraba en pleno juego, sobre todo cuando se hacía un poco de fuerza o de chocaba con un muro, aunque fuera despacio? Es que no quiero liarme a desmontar todo para que no sea esta la solución. Saludos
ya se respondi arriba bro y si se arreglo y no ha vuelto a fallar
@@rafasanchez2880
Hola buenas, pero se puede hacer si mi servo base no para de calibrarse?
Si claro
Alguien sabe porque cuando doy una curva y contravolanteo suena un traqueteo molesto? Que puede ser eso ? Antes no lo hacía