UPGRADE T300RS/GT/TX Motor pinion and belt tensioner bearing MOD 풀리 베어링 DIY American truck simulator
HTML-код
- Опубликовано: 16 окт 2024
- Thrustmaster T300 motor pulley pinion mod / belt tensioner bearing mod
motor pinion : 11mm, 3M-16T Bore 5mm
bearing size : MR93ZZ:d = 3mm, D = 9mm, B = 4mm
다음 T300RS 밑에 풀리 베어링 업그레이드
Next T300RS lower pulley Upgrade video : • Upgrade Thrustmaster T...
알리익스프레스 나 이베이등에서 구입하실수 있습니다.
장비테스트 게임은 아메라칸 트럭 시뮬레이터 입니다.
BUY LINK :
MOTOR PINION : ko.aliexpress....
BEARINGS : ko.aliexpress....
I want to know more about your T300, especially where you got that OMP wheel from as well as the gear indicator, I like that it goes into double digits
Finally true modding :)
Hey man, thank you so much, the mod turned out great for me but i have a question. What kind of lubricant did you use on the bearings?
Hi, guys
This is RC Spectrum.
It's been a month and a half since my channel and Google account were hacked.
Now I've restored the channel, and 90% of the comments and replies I posted before have been erased.
Please leave a new comment.
My channel is not exclusive to RC cars. A channel that revises and reviews all RC remote controllable toys and equipment.
3:39 1 tiny mistake and i know this from R/c racing never put the pinion set screw in w/o locktite they will come loose!
7:12
its very surprisingly to see "Спаси и Сохрани" in your video
@@RCSpectrum i mean your ring on finger
@@RCSpectrum it means " god Bless us and Preserve"
@@RCSpectrum Bless you too!
와 작업하고 아직 켜보진 않았지만 일단 겁나 부드러워 졌습니다 감사합니다
I bought mr93zz but they dont fit. I have a 3mm diamter screwdriver and the original bearing also fits, but these mr93zz dont. I dont understand. Should i push or something? Or buy other bearings?
Hello.
Recent T300RS models have the same bearing outer diameter size, but have different inner diameter sizes (i.e., the front and back thicknesses of the stock shaft are different)
So, in order to install the MR93ZZ bearing, I think we need to get a 5mm shaft and cut it and change it together.
Good luck, my friend.^ ^
Very nice can you explain us how make Paltier cooling on T300. Because to be honest everyone who play suffer from overheating.
@@RCSpectrum ok tnx i search them.
Thanks for the great guide, I also implemented it 😊, but I encountered an issue. There is a notch on the original pulley, which completely fit the shaft(axis? lol), when I switched to the pulley I bought (same as yours), I can only fix the pulley by the screws. After a period of use, the screws lose the tightness, and the pulley is unable to transmit the force from the motor to the belt. I wonder know if there is another way to fix this, thanks.
The exact name is the metal motor pinion.
The metal pinion has two fixed no-head bolt holes.
If you tighten both places, the pin is perfectly fixed.
I can't tell you the exact problem without watching the video.
Check it out again.
Ok, I'll try again. Thanks for your help!
@@s19980318 and also use Loctite to be sure it wont get loose again
벨트텐션을 최대로 했는데 포스피드백을 강하게하거나 핸들각도 900도 기준으로 한쪽 350도를 넘어가려고할 때 모터쪽 벨트가 강한 힘 받으면 이가 넘어가면터 탁탁 소리가 나네요
해결했습니다 핸들을 돌리면서 모터를 위로 올리니까 텐션이 더 강해져서 괜찮아졌네요
@@ChickenTerminal 저도 지금 작업했는데 이런 증상이 있네요
저도 다시 최대치로 올려 보아야겠네요
How do you fit the omp wheel rim and where can I find this mod ?
Are there any other mods for this wheel?
Hello, friend
I've already made videos about the modified T300.
Search for T300 on my channel.
You'll find more videos about the T300.
@@RCSpectrum thanks
제 t300이 포스피드백을 어느 정도로 주면 딱딱 거리는 소리가 나면서 핸들 중심축이 안맞아지는데 이게 벨트가 텐션이 모자라서 넘어가면서 생기는 건가요?
예~
모터와 첫번째 풀리간에 밸트 장력이 느슨해서 그렇습니다. 분해한후 장력을 적당히 당겨주시면 해결됩니다. ^ ^
thank you so much for the great guide. However, I wanted to know if the steering wheel improves a lot even in racing simulators such as Assetto Corsa. I wanted to know if the force feedback is more stable and resistant. I already installed Noctua fan to avoid overheating, I think this in your video is the final upgrade!!! Let me know as soon as you can and thanks again!!! 😃
@@RCSpectrum thank you so much for everything. I'll do this upgrade as soon as I can. I'm a little scared to do all these procedures because I'm a bit bumbling 🤣 , but I'll try anyway. If you do something wrong, however, you shouldn't damage the steering wheel. In any case, if I have any doubts, I will ask you for further information. Thanks again bro❤
great brother, I wanted to know, but if I use normal screwdrivers can I do all your procedures or do you need specific screwdrivers? For example when you remove the protections from the white elements or when you use the screwdriver on the pinion. Thanks for all the info and let me know as soon as you can 😃❤
안녕하세요. 알씨스팩트럼 입니다. 이제 채널과 계정이 복구되었습니다.
알씨스팩트럼은 RC카 채널이 아닙니다. RC 리모트 컨트롤 장난감 채널입니다. 조종하고 만질수 있는 모든 리모트컨트롤 하는것을 개조하고 만드는 채널입니다.
그전에 제가 달아드렸던 댓글과 답글들이 90% 삭제되었습니다.
왜 답글이 없냐고 하시는분들이 계식데 이점 양해 바랍니다. ㅜㅜ 저도 너무 속상해요.
새로운 댓글을 남겨주세요.
티스토리 블로그 리뷰 : kyz0508.tistory.com/294
풀리같은경우 결합후 조이시던데 육각렌치인가요?
네... 2T 짜리인 일꺼에요....
혹시 필요한 준비물 갯수좀 알려주실 수 있으실까요?? 부탁드립니다 ㅎㅎ
안녕하세요.
링크된 곳에 들어가시면 모두 알려드렸는데, 몇번의 해킹으로 링크와 답글이 모두 지워졌습니다.
더보기란에 부품 표기가 되어 있습니다..
작업 후 잔진동들은 거의 사라지고 덜컥거리기만 합니다. 원인이 뭘까요?
핸들을 장착하지 않고 본체를 열어 둔 상태에서 포스피드백 테스트 때는 엔진 진동 등 잔진동이 구현됩니다.
@@RCSpectrum
자세한 답변 감사드립니다.
분해 조립 과정에서 잘못되지 않았나 싶은데, 벨트텐션은 어떻게 조절해야 하나요?
Great video,
E키가 너무타이트해서안들어가는데 뻰치로 결합해야하나요?
네... 롱로즈나 플라이어로 살짝 끼워 넣으면 됩니다. ^ ^
Hey, i found the same pinion but 10mm, i think its the same like from your link, but its cheaper but only one piece, i dont need 4 😅 Myabe do you have link to 11mm? I cant found
@@RCSpectrum Thanks a lot 🔥💚
Did the 10mm pinion work? I am having the same problem
@@k1ddjayyno
내부보어 5미리로 사면 되나여?
네.. 내부 샤프트직경 5mm 입니다.
What is your setting on thrustmaster control panel after install this bearing?do u turn up the gain?
@@RCSpectrum does prevent the motor from overheat?
@@RCSpectrum thanks bro....
@@mohdmalrohazem9837 your welcome
베어링 구매 링크가 없어졌는데 다시 알려주실 수 있나요?😢
ㅎㅎ 안녕하세요.
매번 다시 걸어도 상점이 없어져요.
여기 있네요.
ko.aliexpress.com/item/32822264881.html?spm=a2g0o.productlist.main.1.31162ef3YtqkFK&algo_pvid=892dee0d-b839-4b4b-a7c6-6de3ae7aba16&algo_exp_id=892dee0d-b839-4b4b-a7c6-6de3ae7aba16-0&pdp_npi=4%40dis%21KRW%215370%214826.0%21%21%214.05%21%21%402101c5ac17037347357574092e2f24%2166652786826%21sea%21KR%211836052067%21&curPageLogUid=YiInoZLx4OEP
즐거운 튜닝 하세요.
@@RCSpectrum 감사합니다~!
안녕하세요
혹시 T-GT에도 적용이 되나요?
벨트 방식이라 구조가 같은데, 모터쪽은 따로 벨트 텐셔너가 없습니다.
핸들축에 연결되는 두번째 풀리에만 벨트 텐셔너가 있어요.
하지만, 싸이즈가 다른걸로 보이네요.
네... 이곳에 맞는 베어링을 사다 교체 하시면 됩니다.
tgt는 기본적으로 벨트가 워낙 두꺼워서 부드러워 지려나 모르겠네요.
답변 감사합니다.ㅠㅠ
hey bro help me pls are u there
Hello, brother.
What's the problem?
@@RCSpectrum my power supply burned out:( It broke when I plugged it in 220v,..Is this power supply repairable?
@@BeroTTo 이런 문제는 제가 도울 수 있는 방법이 없습니다.
내부 전원 공급 장치가 손상된 것 같습니다.
전문 수리점에 문의하십시오.
@@RCSpectrum thx you
How's feel?
@@RCSpectrum thanks bro
i know bearing mod works on t150, does motor pinion mod work though and how does it change the feel?
In fact, the tensioner bearing effect is the greatest.
Since the wheelbase is opened anyway, replacement of the motor pinion is carried out with the bearing.
Since the metal pinion is a metal, it holds the belt more firmly so that it does not exceed the notch.
🥰🥰🥰🥰
Nice! Which game is this?
I bought 3×9×4..is it ok?
@@RCSpectrum thanks bro
FPV카메라는 아이폰에서만 영상이 작동이 되나요?
@@RCSpectrum 헨롱 1/16탱크용 유닛 업그레이드 부품200w WIFI DIY Th17019- smt8 이라고 표시가 됐는데요.
@@RCSpectrum 감사합니다.
Link?
@@RCSpectrum Thanks dude! Appreciated