Remote Collar Setup | How To Access Two Dog Mode And Add An Additional Receiver
HTML-код
- Опубликовано: 15 окт 2024
- I'm going to show you how to access two dog mode and add an additional receiver to your mini Educator ET 300 TS
Thank you again, and please take advantage of these things below!
Visit my website!
Al Longoria.Free Dog Training: www.longoriaha...
If you have an Amazon Echo Device, please be sure to enable these skills!
My Amazon Alexa Feature!
Daily Dog Training Tips/ Flash Briefing “Al’s Dog Training Tips”: skills-store.a...
Ask Me Dog Training Questions “Al the Dog Trainer”:skills-store.a...
Purchase Merchandise:
To purchase items you may have seen in this video: squareup.com/s...
Social Media:
Follow me on Instagram - / longoriahaus
Follow me on Facebook - / longoriahaus
Please leave a like, comment any questions, and subscribe! Also don't forget to hit the bell icon to get notifications every time I post a new video.
View a variety of dog training topics discussed on the Facebook Live Q&A from October 10th 2018. Tune in live every Wednesday at 8pm CST
#dogtrainingtips #dogtraining #liveq&a
Dear Lord, thank you! Went through like five other videos and it was not clear at all and missing steps. Thank you!
THANK YOU! The very first step you show was probably the most important! That was the step all the other videos didn’t say needed to be done. Stupid other videos didnt say that a 2D mode needed to be activated! That’s why I kept controlling two collars at once instead of separate buttons. This is a life safer! I got so sick of carrying two remotes. THANK YOU THANK YOU THANK YOU!
You’re most welcome. Good luck with training your dogs!
THANK YOU! THIS WAS THE MOST HELPFUL VIDEO ON RUclips ABOUT THE MINI EDUCATOR 😭❤️
Thank you for this tutorial. I wouldn’t have been able to set it up for 2 dogs without you.
clovala I’m so glad it helped. If you ever need anything, hit me up.
Thank you!! I bought my collar set second hand and this was the only video that helped me figure out how to get the collars to be individually triggered. Thanks!!❤
Thanks I watch ten videos and yours was the only helpful one! ❤️😊
thank you sm, this helped me fix my little slip up where i ended up programming the 2 collars to the same button. a lifesaver
I hope this still works for these collars in 2023 because this video is great!
Extremely helpful! I had to buy a replacement receiver and was lost! Thank you!!
I’m glad I was able to help
Huge help!! 👏🏾👏🏾👏🏾
thank you so much for this video! first tutorial i've seen that actually explained the full process.
This was super helpful and I have watched 4 times but I can't seem to get the red button and black button to work separately. It only lights up when the stimulation is on when I press the red button. Nothing with the black button. I am definitely missing something.
Thank you so much! I was having issues trying to program my “The Boss 800” which this works on as well!! 🥰
That’s great
You rock! Thank you. Cleared up some confusion on setup! Thanks again!
Bernie Cook my pleasure. If you ever need help, please reach out!
great help!
Great video thank you
You are the best! Thank you!
That’s very kind. Thanks!
Hi! I am going to watch this video and excited that it was referred to me by the company selling the ET 300. I am in the situation of needing to have a remote in 1D mode when it came as a "set" with 2 collars and one remote. I'm getting a strange code display when following the steps in the user guide.
Thank You sooo much! Best video out there!!
Thanks! I’m glad you found it helpful
Very helpful and well explained. thank you
It’s my pleasure. If I can ever be of any help. Please let me know!
Thank you so much!
I feel like I should have known that the setting needed to be at 0! Lol
I made a note of it in the manual and jotted down your RUclips name in case I need to trouble shoot again later.
Miranda Neizer I’m so glad to hear this! If you ever need help, please let me know.
Thank you, that was so helpful!
Thanks for saying that! If I can help in any way, please let me know.
Thank you made it easy
Great! I’m so glad that it helped.
Can Tone still be used in 2 dog mode?
I just bought the et300 will I be able to add a second collar to that? Thanks!
I’m pretty sure you will be able to. If you need help, please reach out.
Hi! Thank you for this helpful video. I do struggle with two things - my dogs work or respond at a different level, how do I set up a different level for dog 1 and dog 2? Is there a boost option if you have a 2 dog mode on and what does the vibrate button do in a 2 dog mode? Thanks a lot! Greetings from Slovenia
Hi Ziva! Thanks for reaching out. Let me first address how you can set the boost level. Here is what I’d like you to do. First, make sure the collars are not on your dogs. Next, change the transmitter to momentary mode. Now, set the stimulation level to zero. Next hold the black s for several seconds. When you hold the button down long enough, the zero will turn into a 1 on the display. At this point, you will need to dial the collar to the additional boost level you would like for dog 1. So, if your normal working level is a 9, and you would like your boost level to be 15, you would turn the dial to 6. The 6 would be added to your working level of 9. Now that you have boost level on the display, tap the black s again and that will set the boost.
Now let’s lock in your working level. Turn the dial on the top of your collar to your desired working level for dog 1. Once that’s one the screen, press down on the dial on the top of the transmitter until you see the 1D on the display change from flashing to solid. When this happens, your collar is now locked. When you press the black s, it will now send that level to dog ones collar. When you press the black s immediately followed by the red s, that will now send the boost level to dog ones collar.
Follow the same instruction for dog two but instead of pressing the black s, you will press the red s.
I hope that helps.
thank you very much
You're welcome!
How do I get two receivers on 1d mode ??? If I have multiple et300 can I take 2 collars and use the same remote ?
How does the vibration mode work?
Do I have to do this pairing every time I turn them on? Is it ever automatically set up when I turn it on?
You don’t have to pair it each time and now with the most recent models, the finger button is always ready to send a signal.
Can I have two dog and tone on the same remote?
My remote won’t stop switching between 2 and 1 dog mode
Hi so I have two dogs. I pressed like you said the red black and t button and heard two beeps. But I till see dig1 unless I press the top button and put it in two dog mode. Any suggestions?
I’m not exactly sure what you’re trying to do. Once you set the dial to zero and then hold the red s, black s, and black t, you should now be in two dog mode. You’ll get two beeps from the transmitter. Your black s will now go to dog 1 and the red s will go to dog 2. I hope that helps. If not feel free to message me back
@@AltheDogTrainer I have the new ai et 300 it just came out. What’s happening is it’s has dog1 and dog2 if I press the top button it goes to dog1 press again to dog 2 . so instead of black for black collar and red for red collar. It has black and red for dog 1 and black and red for dog 2 . Tech support says this is the way it works.. but I think it bs the yellow et300 had black for black collar and red for red collar.
I’ll have to get my hands on that collar and see if I can help. I’ll order one tomorrow
@@AltheDogTrainer thanks let me know
@@joefnj2002 the display shows which dog collar you are activating.
can the two dogs be set at different stimulation levels? I'm trying to figure out if I need to purchase a second transmitter or just an additional receiver. Thank you!
Yes, two dogs can be set at different levels. I think you only need the extra receiver. If you need help, I’d be happy to walk you through how to do that. (832) 734-5189
Answered all my questions. Thank you!
You’re welcome
Both of my ecollars don't have red buttons. Now what should I do?
Sorry that I’m just seeing this. If you press and hold the black S and follow it with the red S, that will access boost mode. If you invert that, then it will work for the opposite collar. I hope that helps.
@@AltheDogTrainer Thanks alot!
This video would be awesome if it was louder. I can barely hear it on my phone
Why is my second collar not receiving signal on 2 dog mode? I’m following everything
CandleLove 09 oh no! I’d be happy to walk you through it. Call my office number and I’ll get back with you. (281) 979-6956.
Al
I went through the same problem. To fix it I first pressed the red button to put it on the second collar. From there reconnect the second collar to the second collar setting. Than make sure to hold down the red S and then the black S until it beeps.
If you hear the remote beep twice, it will be on 2 dog mode.