Bro when I get some extra cash you think you could send me grips for a heritage Arms .22 revolver? My dad would TRIP if I gifted him some custom made grips!
@@TerriblyTactical hell yea 😎 prolly be making a request soon ish then 😂 the revolver he loves to have around the ranch has snake skin printed grips but I know he would trip over custom one of a kind grips 😂❤️
I don’t use any glue’s or hair sprays. Before every print I wipe down the surface with acetone and a lint free towel, and I’ve never had a problem with adhesion. Hope that helps.
"Free Men Don't Ask For Permission"!! Love this video, and you're totally on point. For those that ask, where can I get the files? Where do I get the parts to put in it?.... If you have been able to figure out how to get a printer, with some, to much assembly. If you can navigate RUclips to find this video. I can't imagine that you can't figure out the rest. As you said, It's called the Internet. That being said, if you're not a somewhat knowledgeable gun person (which I just assume everyone is) buy an actual firearm first, if your circumstances permit, and get familiar. I dig the black and orange theme, looks like my Prusa printer.
Grab a bar or soap and some sand paper. Sand down the sides of that drawer that is sticking and then run soap back and forth on it a few times. Should make it open and close a lot easier.
i feel like the kid i’d always see skipping class is teaching me how to print LMAO bros energy is amazing im a brick when it comes to learning things unless i watch it multiple times but for some reason watching this video is like “printing for dummies” idk what about it but he made this video with great finnese
I struggled for nearly six months,, I bought four different build plates,, two printers,,a Creality ender 3pro and now thankfully the Creality K1 and I tried everything to get my prints t stick to the plate,,, nothing worked more than 50%of the time,,, and a month ago I discovered hairspray,,,,90%of my prints stick to the plate and if not,,,glue stick 😊😊
Man I been following psr for years and this is the first video I've seen of yours! I'm a felon and live in California so I appreciate your huevos and fuck ya finally got my first printer videos coming soon. Thanks for the moral boost. I'm an American and I need to be able to chop lines and build f/arms...
Nice, subbed. Getting a printer soon for various things around the house. Good start video for after your first print. I wonder if there is a soft drill brush we could find for deburring? Best tip I found on my own is just storing the filament in a air tight tub with desiccant.
@@TerriblyTactical hell yeah man, love that. I had my ender 3 v2 since it came out and never had an issue either. finally upgraded to the Bambu labs A1 last week and its like a new world. stay frosty my friend
I joined the patreon thinking thered be a link to the actual print plans but nope, just links back to the free videos that don't say where the plans are... good job
I like that wooden drawer setup you have. I plan on printing miniatures, some lures, and differing car parts. Perfect for that. Well organized. 🇺🇸 needs to start manufacturing again. If you don't print it you won't be getting it. Not anymore.
@@BeyondtheVeil888 depends on what you're printing and a multitude of other factors. I wish I could help more, but it really is just a matter of trial and error.
Dude you are awesome..... but not in a weird way. I'm about to pull the trigger on a printer 2 years after this video has posted and still sounds very viable.
where do you get the files for the prints? I've been wanting to get into this because I enjoy building things, but don't know where to find the files for what I want to print... tia
@@TerriblyTactical i agree, i see videos of ppl that were bringing their guns to gun stores n asking "are these legal anymore?" and trading them in for significant losses. so sad to see. very glad to see you and others advocating for the 3D2A community!!
Right now im deep into conversion kits and lots of reloadings I got a hand me down 22 mag round little did I know 224. is the size of the rounds my point there are so much to learn no piece of paper will stop a smart person
I wanna see you print out some reactive targets! maybe a plastic insert that breaks off when you blast it? (I also would love to see you print up heritage Arms revolver grips)
Bro u are one funny dude 😂😂 I was dying through like half the video plastic bags are necessary if u do excessive amounts of coke just joking 😂😂😂 please don't raid my house 😂
I haven't done any 3D printing yet but I own a machine shop and welding shop and I prototype For people who have inventions that didn't quite get it right so they come to me to help figure it out But I can tell what the best tool ever is going to be for 3D printing Leather crafters have tools called edge bevelers And that's what you need edge bevelers you can run them on the edges and it'll clean up and deburr everything Slick as snot
The printer can use any MicroSD card, regardless of size. Period. Thing is... it MUST be formatted FAT32. Larger cards may need to be reformatted. Also, most 3D printers cannot access any space beyond 4GB, so use the smallest (cheapest) cards you can get (as long as they aren't those counterfeit cards).
@@TerriblyTactical It is. I work very closely with the microcontrollers used in 3D printers... and with 3D printers... all the time. One 3D printer group has named me "technical expert" and I'm moderator of another. I run a small 3D printer farm.
@TerriblyTactical I feel I'm doing myself a disservice by not having a 3D printer and making some of my own parts... was curious if certain colors function better than others
Most of those look terrible and would probably break if you tried to shoot them but there was a couple that looked really good not gonna lie. The ones with the nice texture seemed very solid. I can’t wait to learn to make one. Trial and error right ?
these things are all functioning guns bro, there's even shooting competitions for these things. You can make them 90% plastic these days with just a metal barrel and some other tiny metal parts
Can you go over setting up stl files, with or without supports, or custom supports for the back and trigger hole I'm good on the shell just not the inside
I'm probably not the best person to ask, try print shoot repeat. He's much more a professional than I am and ever printer is unique even if you had two of the same ones right next to eachother, they both might require different settings for the same print. It's just a lot of trial and error unfortunately.
Have they developed a fully completed working pistol yet? Every I’ve seen so far is printing frames then going out and buying metal to complete. Never printed before does it matter what ender I get? Ender 3 people commonly say but they have the 3 pro and 5 others so. Just want to verify before I buy. Also don’t have a computer and would ideally like to do everything on iPhone and transfer files to SD. Is this possible? It has to be I just don’t know where to start
Ender 3 of any variety will get it done and yeah their are 99 percent completely printed firearms that you can print and they just require screws or bolts or a thumb yack or rubber bands but yeah.
@@TerriblyTactical lol brought a used computer with a bunch of stl files like 600 I deleted them not know wtf they was now I'm ready to throw the mf away fucking Facebook marketplace and it was a file that was labeled ender 5 or some shit I reset the computer not knowing now I know lol hope they wasn't doing bad shit
Shit said stuff like musket German Luger and so on sti but I saw files named cod like attachments g17 g18 p80 and wild shit I thought they were like a ton of gun pictures now I'm kicking my self lol when your uninformed you make unknown mistakes
So lets say hypothetically when you print the lowers for glocks and or rifles lets say I print the lower for a arp what other parts to I need to complete this set what would ai search im brand new to this
Do the frames last or take a poop after some rounds? Also with the internet at my disposale, how hard is it for a beginner to hop into this stuff not knowing anything abt 3d printing except it makes stuff
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
SHOOT STEEL TARGETS (10% OFF) WITH CODE: TT10
bit.ly/3k6PAiF
Bro when I get some extra cash you think you could send me grips for a heritage Arms .22 revolver? My dad would TRIP if I gifted him some custom made grips!
@@spacetexan1667 I'd have to see if there are files and if not I'd have to design my own but I'm sure that shouldn't be a problem my dude!
@@TerriblyTactical hell yea 😎 prolly be making a request soon ish then 😂 the revolver he loves to have around the ranch has snake skin printed grips but I know he would trip over custom one of a kind grips 😂❤️
@@TerriblyTactical What size is your ender 3d printer? by measurements like 250/50 for example
I don’t have a Computer can u send me glock 19 gen 3 Frame on gmail so I can put it on a usb and 3d print it
i’m so happy we still have people like you in this country
Lol I do what I can
You can be one too
When you said real G’s move in silence like lasagna I hit that sub button with a quickness lol
Lol much appreciated man
Read this comment as he said it😭😭😂
Me too @@5yntaxmusic... Me too. And I have no idea what it means but I fuckin love this guy now.
@@Dubteethe g in lasagna is silent
"for one, they will never find them" Thats worth a sub right there. Let freedom ring son
Much appreciated
If you dont like 3D printing and guns, you arent a gun guy.
Precisely
I don’t use any glue’s or hair sprays. Before every print I wipe down the surface with acetone and a lint free towel, and I’ve never had a problem with adhesion. Hope that helps.
For sure!
Currently working on the Orca with my two printers! printing was the best investment I ever dove into.
Solid!
“Let’s face it I’m already on all the lists” 😂😂😂 related to that too much
Lolol
man with how I’ve been moving I’m probably on all of them and I don’t even have a printer yet. Can’t even buy an AR15 here.
keep up the good work! happy to see someone exercising their rights
Much appreciated
"Real Gs move in silence like lasagna" thats the coldest shit ive ever heard. I'm stealing that
Lol it's a lil Wayne bar
I'm afraid my wife would be printing special toys .
Hahahahha that's hilarious
Adjust the mm length 😂 it’ll make you feel better 🤣
She sounds classy
This is great! Let her print!
Make sure she's take yours for a mold and not some random files 😂😂😂😂
Thanks for the great ideas and voicing your opinions. Keep them coming.
Much appreciated brother! I'll be sure to!
"Free Men Don't Ask For Permission"!! Love this video, and you're totally on point. For those that ask, where can I get the files? Where do I get the parts to put in it?.... If you have been able to figure out how to get a printer, with some, to much assembly. If you can navigate RUclips to find this video. I can't imagine that you can't figure out the rest. As you said, It's called the Internet. That being said, if you're not a somewhat knowledgeable gun person (which I just assume everyone is) buy an actual firearm first, if your circumstances permit, and get familiar. I dig the black and orange theme, looks like my Prusa printer.
Much love bro!
@@TerriblyTactical files where can we find the files?😂
@@chrisu1809sailing on the odd sea, have you ever read Homer's book?
@@chrisu1809 seek the odd sea. If you can’t follow the signs or find the catalogue, change the c to a g.
Man I can relate with him. Amazing man. Salute to you sir
Thabks haha!
“Free men don’t ask permission!” You got me 🤙🏽
Indeed good sir!
its wild that 3d printing tech has advanced a lot and you almost dont need any sanding at all now and can print stronger material also
Most definitely! It's super cool!
Thank you bro so much. I just ordered my first 3D printer and its good to have some support and insight on the matter.
That's what I'm here for
Amigo qual filamento você usa, para as empresao de flamen do Glook?
Thanks!
Very much appreciated!!!
Grab a bar or soap and some sand paper. Sand down the sides of that drawer that is sticking and then run soap back and forth on it a few times. Should make it open and close a lot easier.
Much appreciated
"waxing" Kind of?
🛹 😮 ⁉️
Thank You brother ,,God Bless You and Youre Family ...just opened me up to whole new world ! keep making these videos ..
Much appreciated
@@TerriblyTactical my pleasure,,,have ah good one
@@jCarloGalliano7279 same to you!
Free men dont ask for permission best thing i ever heard lol
Hahah well it's true!
Ghost glizzys lmao
👻👻👻
Subscribed because of your mentality.
Much appreciated!
i feel like the kid i’d always see skipping class is teaching me how to print LMAO bros energy is amazing im a brick when it comes to learning things unless i watch it multiple times but for some reason watching this video is like “printing for dummies” idk what about it but he made this video with great finnese
Lol much appreciated
Hell yea bro I'm with you 100.
Yessir!
Just ordered my creality ender 3D printer and some high-quality filament! I'm excited lol
Niceeeee!
'Im already on all the lists" 😂😂
Indeed lol
About time there's someone for that freedom
Always for freedom
I struggled for nearly six months,, I bought four different build plates,, two printers,,a Creality ender 3pro and now thankfully the Creality K1 and I tried everything to get my prints t stick to the plate,,, nothing worked more than 50%of the time,,, and a month ago I discovered hairspray,,,,90%of my prints stick to the plate and if not,,,glue stick 😊😊
@@stuarthelliwell6784 indubitably!
"I'm a loser" totally took me out 😂
Lolol
Your a inspiration there should’ve more people like you right now in this time it feels like they are taking away the 2 amendment
They're trying
Man I been following psr for years and this is the first video I've seen of yours! I'm a felon and live in California so I appreciate your huevos and fuck ya finally got my first printer videos coming soon. Thanks for the moral boost. I'm an American and I need to be able to chop lines and build f/arms...
Freedom is freedom across the board
Let me know how it goes homie sending my respect from LA
I'm using a 64 gig, SD card on my ender. You just have to format it to fat32
Appreciate the tip!
Nice, subbed. Getting a printer soon for various things around the house. Good start video for after your first print. I wonder if there is a soft drill brush we could find for deburring? Best tip I found on my own is just storing the filament in a air tight tub with desiccant.
Most definitely! Thanks for watching and appreciate the sub!
buying and learning how to really use a 3d printer is one of the best decisions I've made in regards to enhancing my freedom
Amen to that!
@@TerriblyTactical I know this video is 3!years old now. You still using the ender or have you upgraded since this?
@justsomemincedgarlic haven't been able to print much lately but still rocking the og ender! Never had an issue!
@@TerriblyTactical hell yeah man, love that. I had my ender 3 v2 since it came out and never had an issue either. finally upgraded to the Bambu labs A1 last week and its like a new world. stay frosty my friend
@@justsomemincedgarlic likewise beotherman!
I joined the patreon thinking thered be a link to the actual print plans but nope, just links back to the free videos that don't say where the plans are... good job
When did I ever say there would be files there
@TerriblyTactical Fair enough, I'm just letting others to know not to expect anything.other than more ways to be tracked with ZERO benefits
With a banbu lab printer, you don't have to worry about printer settings so much. It's pretty much press and print.
Bamboo is fed shit
Thanks for giving us the game as well❤💯
😎🇺🇸🔫
Hats off,keep thinking big
Much appreciated
Holy shit I loved this video, I'm subbing
@@the_quiet_k1d725 much appreciated
Try the hair spray. You'll be shocked at how clean and convenient and reliable it is when you find the right PVA spray.
Good tip
God bless you man! Well said
Much appreciated!
You got yourself a subscriber I love the way you think my brother ❤
Much appreciated. Thanks for watching!
Filament extrusion smells like freedom!
It surely does
“I’m already on the list” hell yea 😂
@@danielgamer5402 lolol wear it as a badge of honor my friend!
Subscribed after this video brother! ✊
Much appreciated
What a good website for specs
Odysee, Hoffman tactical, ctrl pew, yeggi, thingaverse
How have I never seen your channel until now?? lol...."Merica! Great uploads!
Much appreciated
I like that wooden drawer setup you have. I plan on printing miniatures, some lures, and differing car parts. Perfect for that. Well organized. 🇺🇸 needs to start manufacturing again. If you don't print it you won't be getting it. Not anymore.
That's awesome dude!
Nice! I can't get past my first project - but will keep pushing forward!
Always!
Do you have any tips?? Like whats the best filament and settings to make a successful print? That's the blunder I cant overcome at the moment
@@BeyondtheVeil888 depends on what you're printing and a multitude of other factors. I wish I could help more, but it really is just a matter of trial and error.
@@TerriblyTactical not a problem! But where do you usually find the stl files? I tried at odysee but the 3dprintgeneral is all that popped up
@@BeyondtheVeil888 yeggi, thingaverse, plenty of options, Hoffman tactical is a great source as well.
"Just because technology changes doesn't mean your rights do." Hear, Hear!
Dilly dilly indeed hahah!
Dude you are awesome..... but not in a weird way. I'm about to pull the trigger on a printer 2 years after this video has posted and still sounds very viable.
It is!
where do you get the files for the prints? I've been wanting to get into this because I enjoy building things, but don't know where to find the files for what I want to print... tia
Yeggi, thingaverse, ctrl pew, Hoffman tactical.
I like you. All of our printers are going brrrrrrrr
Yeah they are!
this video aged well
Sarcasm?
@@TerriblyTactical no it actually did with our current climate
@@Tee-ina-Skee-Mask not enough people are living constitutionally comfortable
@@TerriblyTactical i agree, i see videos of ppl that were bringing their guns to gun stores n asking "are these legal anymore?" and trading them in for significant losses. so sad to see. very glad to see you and others advocating for the 3D2A community!!
Right now im deep into conversion kits and lots of reloadings I got a hand me down 22 mag round little did I know 224. is the size of the rounds my point there are so much to learn no piece of paper will stop a smart person
Indubitably!
loved this video. i live in england and i wanna try out the SongBird V3 3d printable pistol with blanks. like you said, free men dont ask permission
Amen to that!
@@TerriblyTactical Amen indeed.. happy printing!
I wanna see you print out some reactive targets! maybe a plastic insert that breaks off when you blast it? (I also would love to see you print up heritage Arms revolver grips)
Hahah I'll see what I can do!
Bro u are one funny dude 😂😂 I was dying through like half the video plastic bags are necessary if u do excessive amounts of coke just joking 😂😂😂 please don't raid my house 😂
Lololol much appreciated
He said gs move in silence like lasagna I had to sub n put notifications on😭🤣
Lol nice
I haven't done any 3D printing yet but I own a machine shop and welding shop and I prototype For people who have inventions that didn't quite get it right so they come to me to help figure it out But I can tell what the best tool ever is going to be for 3D printing Leather crafters have tools called edge bevelers And that's what you need edge bevelers you can run them on the edges and it'll clean up and deburr everything Slick as snot
For sure! Will definitely look into that! Thanks for watching.
Real Gs move in silence like.... Subscribed
Lol much appreciated
7:12 ok lil Wayne 😂😂😂😂😂😂😂
Lolol
Yo this guy is fucking hilarious😂😂😂
@@riptkoso5347 lol appreciate that
You sir are my kinda friend 💪🏼💯♥️ hella funny, liked and subbed
@@KILUGAMING much appreciated haha
The printer can use any MicroSD card, regardless of size. Period.
Thing is... it MUST be formatted FAT32. Larger cards may need to be reformatted. Also, most 3D printers cannot access any space beyond 4GB, so use the smallest (cheapest) cards you can get (as long as they aren't those counterfeit cards).
Is that a fact
@@TerriblyTactical It is. I work very closely with the microcontrollers used in 3D printers... and with 3D printers... all the time. One 3D printer group has named me "technical expert" and I'm moderator of another. I run a small 3D printer farm.
What type of printer is that?
Standard old school ender 3
I use blue painters tape on printer bed 😉 anything sticks to it very well and it lasts a while. Give it a try. 😁
Sounds like it'd melt and get stuck to it
The tape does not melt. Masking tape. 😉
So I have never used glue before and print just fine. Smooth pei stock ender 3v3se plate. Just hit it with alcohol and it's good!!
Every machine is different
You can use different size SD card you just have to partition them and format them in FAT32.
Interesting, thanks for the tip
Have you tried it with glow-in-the-dark filament?
@@cainpaul08 i have some but haven't tried peinting anything with it yet!
@TerriblyTactical I feel I'm doing myself a disservice by not having a 3D printer and making some of my own parts... was curious if certain colors function better than others
I want to get a orange frame but it’s not worth buy the 3D printer when I can just buy the frame and build it
No
No
Don’t use glue. Just add a brim to your prints in slicer.
Glue works perfectly fine
I love this man
Lol appreciate it
This dude has my brain 😂
Lol nice
well said !!! Thanks for the views , you are not alone !!!
Thanks for watching!
Dont apologize man. I need a "3d printing for dummies" totorial.😅
Well hopefully some of this helped haha!
Can the Ender 3 V2 version complete the printing of FGC9?
Yup!
@@TerriblyTacticalqual filamento ideal?
Amigo qual filamento você usa, para as empresao de flamen da Glook?
Pla +
The more I watch, the more I want!! Coming soon... Hopefully.
Make it happen!
There no frames for Glock 19 p80 in stuck no more I literally bout the top n inside parts now I’m lookin at this video on how to print a frame 💀😤
Good! Print many!
If you stipple your glock lowers, do they look and feel about the same as the P80s?
Stippling 3d printed lowers isn't really a thing. You can print them with texture built in though.
Most of those look terrible and would probably break if you tried to shoot them but there was a couple that looked really good not gonna lie. The ones with the nice texture seemed very solid. I can’t wait to learn to make one. Trial and error right ?
They are all functional
these things are all functioning guns bro, there's even shooting competitions for these things. You can make them 90% plastic these days with just a metal barrel and some other tiny metal parts
Friend, which filament do you use for the Glook flame print?
Pla plus
Shoutout to big dawg fr💯💯
Much appreciated
Can you go over setting up stl files, with or without supports, or custom supports for the back and trigger hole I'm good on the shell just not the inside
I'm probably not the best person to ask, try print shoot repeat. He's much more a professional than I am and ever printer is unique even if you had two of the same ones right next to eachother, they both might require different settings for the same print. It's just a lot of trial and error unfortunately.
There’s a adapter for the 128gb
Niceee
Have they developed a fully completed working pistol yet? Every I’ve seen so far is printing frames then going out and buying metal to complete. Never printed before does it matter what ender I get? Ender 3 people commonly say but they have the 3 pro and 5 others so. Just want to verify before I buy. Also don’t have a computer and would ideally like to do everything on iPhone and transfer files to SD. Is this possible? It has to be I just don’t know where to start
Ender 3 of any variety will get it done and yeah their are 99 percent completely printed firearms that you can print and they just require screws or bolts or a thumb yack or rubber bands but yeah.
@@TerriblyTactical approximately much would it cost to make a 3d printed lower ?
Better to ask forgiveness than permission, what filaments would you recommend?? Ive only seen a recommendation for cf nylon so far
Pla plus
@@TerriblyTactical awesome, thanks
@@MudOregonVet no prob
Have you had any problems with cracking while shooting?
As long as the print was good then not really no, but of course they are not as long term durable as the real deal.
it don’t gotta be perfect aslong as it shoots and don’t jam😂😂
Precisely
Which parts you use metal/steel reinforcement for?
Pretty much all the internals
But you can still print some of those and it would last for a lil bit
I just wanna know how never plan to make one but knowledge is power
Indubitably
@@TerriblyTactical lol brought a used computer with a bunch of stl files like 600 I deleted them not know wtf they was now I'm ready to throw the mf away fucking Facebook marketplace and it was a file that was labeled ender 5 or some shit I reset the computer not knowing now I know lol hope they wasn't doing bad shit
Shit said stuff like musket German Luger and so on sti but I saw files named cod like attachments g17 g18 p80 and wild shit I thought they were like a ton of gun pictures now I'm kicking my self lol when your uninformed you make unknown mistakes
So lets say hypothetically when you print the lowers for glocks and or rifles lets say I print the lower for a arp what other parts to I need to complete this set what would ai search im brand new to this
It will usually say in the file codes. Plenty of videos out there. Wish I could help more.
Is it possible to print a complete lower from your 3d printer? (Complete as In no supports and holes already drilled out)
Sure is
I am having trouble understanding supports on my builds. I am using the Creality Slicer. Can anyone help?
There's a bunch of good vids on yt, just search em out!
Do the frames last or take a poop after some rounds? Also with the internet at my disposale, how hard is it for a beginner to hop into this stuff not knowing anything abt 3d printing except it makes stuff
If I can do it, so can you! They definitely aren't as sturdy as the real deal but if done properly, they hold up better than expected.
Where do you get your downloads for printing glocks
The internet
Dude, amazing. Greetings from Venezuela, a country where 90% of the population rejects guns. Yes, a bunch of idiots. Keep up your EXCELLENT job.
Much love man! Stay true to your freedoms no matter what anyone says!
Didn’t they totally get wiped out by tyrants (financially) to the point where the encouraged y’all to eat rabbits to keep from starving
Sorry for all the questions but was it hard for you to level out your bed for the ender 3
Not really honestly