*Fly-By* Cammed V6 Challenger
HTML-код
- Опубликовано: 8 апр 2020
- A little flyby video that everyone has been requesting.
Full Bolt on Stock bottom end 3.5 V6
Inertia Motorsports Ported Heads
Inertia Motorsports Custom Cams
Stainless works longtubes/ no cats
Custom Xpipe exhaust
3.73 Getrag diff
BC racing coilovers
Ferrada fr2 wheels
Custom tune by @diablotoona “Johan”
Instagram @srt_dbents - Авто/Мото
Not usually a big fan of hearing V6s fly by, but this sounds great! 👍
Chill out you v8 😂😂😂
@@yozoamate Sounds a hell of a lot closer to a v8 than any other v6 I've heard. 🤷♂️
@@yozoamate 🤣 Oh brother...
This doesn’t even sound remotely close to a v8
@@JM811Cars cope
best sounding v6 i heard in a while
U must be living under a rock 🪨
@@NicotineRosberg gtr’s don’t sound that good
I’m a fan of V6 engines for those who can’t afford a V8 engine in most RWD models just enjoy it there’s tons of High Performance parts for the V6 engines if you want to step it up more
Sounds real good!
That sounds awesome! I need to get mine on that. Got a 2021 Challenger GT, same color n tinted like that. Just need to get a good exhaust on it, maybe a turbo with a cold air intake and it'll be flying and sounding beautiful.
Sounds damn good!
305 hp baby coolest v6 ever
I passed by @0:04 - nice ride man
How are you sure that's you lol
@@vakezanimation762 I'm pretty sure he's joking lol, that doesn't look like him
Oh word? Lol I’m in Raleigh
Lol that is sick
@69mins it's not actually him I've been following rt life for a long time
I just ordered cams for my 3.5 challenger from inertia Motorsports can’t wait to have them installed
How'd they turn out? I ordered the V1. 2 cams to drop into a 4.0L
@@SpecialEDy it’s been a pain in the ass. Trying to get the valve geometry right has been a nightmare. There is a very small gap between the lifter lash and the valve stem and it creates a lot of valve noise/tap. I tried using lash caps but it’s to much on the valves and I was getting a misfire code. The misfire was not from the tune because I adjusted the misfire codes in the tune tables. I took the lash caps off and the misfire code went away. At this point I am ready to just put the original factory cams back in my car. A couple grand wasted wish I never attempted to put these cams in. I guess if your installing heads to then it may not be as bad. Inertia told me I did not need ported heads. Wish inertia would give a little more detail on the installation before selling the cams to people.
@@scatsam7566 you planning on selling the cams?
Sounds good
Woah.....🔥🔥🔥
Besides the cam did you have to modify the engine block for the cam swap to work.
Niiiiice
Bad ass!!!
Cool
Hey @DBENTS, I've spoken with you years ago about your car specifically about your cams. Is the 3.64 rear gear better to use for strip/street purposes or those 3.73 you have?
Hey whats up man i remember, if you ever want to reach out message me on instagram @srt_dbents
The 3.64 was a 198mm "open" differential meaning one tire will spin and the new 3.73 i put in there is a 226mm (MUCH bigger) limited slip diff "getrag" brand unit out of a 2010 SRT Challenger. With limited slip diffs both wheels will spin, helps with traction, burnouts, etc.
I killed the old differential after like 60k miles
I've been looking for a good v6 channel your car is the best looking And sounding so far. Can you do a in-depth video of your exhaust.
allee gammons thanks man check out my Instagram there is way more content and you can ask me questions @srt_dbents
@@srt.dbents how did you buy the heads and cams? I'm trying but I can't find them
One question and its a serious one, why not get a V8?
@@JB-or9yw why does it matter. You probably don't even drive a challenger. We love our cars because they belong to us. Stay in your own lane
@@Peacefuldestruc i only asked a question. See me personally im into sleepers.
I had a 24.5ft 4 door dually with a 750hp 6.0L. I absolutely demolished cylinder number 1. High horsepower without proper engine build results in catastrophe. Now I'm stuck between rebuilding my 6.0 to handle 1000hp and be a daily driver OR swap the motor&tranny on my 2005 f150. Still can't make my mind up.
BTW, you're right! Idon't drive a challenger. You do not need to be a prick telling me to stay in my lane. I only asked a simple question.
I just ordered cams for my v6 challenger. did you change the converter?
hey bro whats your complete setup with the cam process and headers and a price just for parts
She sounds like a Mustang, good enough for me
Sheeeeesssh
Sounds like if a slant 6 was a v6 that’s kinda cool to me
Lol a yellow chally drove by as well
Drag cars aren't my thing but damn this thing is nice.
How much did the camshaft install cost?
Which resonators do you have on?
Where you get the cam and how much everything cost?
Where’d you get the cams at?
I cant find any tuners for my 2021 sxt, they all dont work for my car
Sounds really good for a little v6. At some points it sounds pretty close to a v8. Any dyno numbers?
The only knock I have on my charger is the v6 is too high pitched. Just can’t afford a hemi yet
Where did you get your cam
sounds like my old civic
Hey she's sounds amazing man! I plan on getting my 2017 challenger v6 RIPP supercharged, how much did it cost you to cam your challenger?
Its a 3.5 ripp doesnt make them for the 3.5
@@sleepingmoon6649 he asking about the cam, his challenger is 2017 so it has the 3.6
How do I get mines canned I got a 15 sxt plus
What do u have done to ur exhaust
What cam did you get
Nice sound! I ended up going with the V6 Honda Accord with a 6-speed because it can keep up with a 5.7 l
Are you using the stock diff and drive shaft
3.73 Getrag swap out of a SRT8. I replaced the driveshaft with an srt8 one as well
Sounds really good man I'm wanting to do this set up on my charger what all do you have done to it
i think he straight pipped it and took the cats off too
Most of this sound is from the cam
How much did it cost in total to get cammed
Is it manual??
Post more videos bro
What cam do you hav
If I just install the longtube on mine with the high floor cats will it give me engine code if there is no leaks
Yes it will. You will need a tune with long tube headers
3.8?
What’s the exhaust setup??
Where should I go to get my V6 cammed ??
Inertia motorsports
What cam?
How much u need to do tbis
whats your best 0-60 time in the 3.5L?
Mines 6.1 with just an intake installed
@@tristanthatcher9660 in a 3.5L? Find that hard to believe tbh
@@tristanthatcher9660 No buying it.
Mines 5.7
I hit mid 5s in My 2013 genesis 3.8 sedan on good tires
Sounds too good for a V6 is that the cam effect?
Yes
You in Raleigh nc?
Yes I am
E-85???
why are people saying this sounds like a v8?!
I think a better exhaust system would sound better
Do you know anywhere I can get cams for my 3.5?
Inertia motorsports
Why did it get so loud but move so slow my v6 is quite can't even hear it run and it's got bigger injectors, cold air intake and a diablo tuner and it hauls ass on 9.1 octane
what exactly did you have to do to get this sound?
Any of y’all think the vortech g35 procharger could fit the charger 3.5??
With massive modification, money, and time
Just get the RIPP supercharger...
Just save up for the v8 lol
“Fly-by” lol looks like it was on slow-mo, sounds good tho but v6 challengers and chargers are too heavy for that small engine
Bet It would beat that Honda
What was ur budget man
I have a 2018 Chrysler 300 pentastar
The 3.6 is faster, but the 3.5 sounds 10x better
Sometimes it's worth going just a little bit slower to sound way better.
🤢
This sounds horrible
Caro Quintero I’m glad you love it ❤️
Dont say anything if you dont have something good to say
Where's yours? 😄