Expert Mechanic
HTML-код
- Опубликовано: 20 май 2024
- expert mechanic,six cylinder diesel engine piston fitting,pistton fitting, piston,how to install piston rings,six cylinder diesel truck engine ka head ma piston ke fitting,diesel engine piston fitting,six sylinder diesel engine,six cylinder diesel engine, diesel engine,6 cylinder diesel engine,six sylinder diesel truck engine ka head ma piston ke fitting,valve adjustment,rebuilding engine,cylinder sleeve installation,engine,engine restoration,how to rebuild an engine,engine rebuild
Авто/Мото
That's frickin clever. I just use a universal inline fuel pump. It pumps any liquid I need to transfer
La bomba de combustible la comencé a usar de esa forma con un depósito para agregar aceite alas transmisiónes de VW con relleno por goteo
INSANELY clever!! 😂😂
For this type of application, I will cut a hole in the cap, feed in some tubing to touch the bottom and poke a hole above the oil level on the side of the bottle. Then use an air gun to pressurize the bottle and it comes out the tubing. It’s important your air gun has the ability to feather the trigger. Ask me how I know. Also once did it with tire slime and forgot to remove the seal under the cap. Done properly though, it will empty a quart in about ten seconds.
That looks like a power steering pump.
@@wesman7837it is😂
Power steering pump as a fluid pump 😅
A P.S pump technically is a fluid pump 😂 it pumps the power steering “fluid” through it
I don’t know why I never thought of it 😭😭😭
But ps pump has metal friction parts. Not good in long run, sending the wear and tear into the transmission😁
@@kevindunn175 just wait until you hear about engines being air pumps
@@Suseko44 It would be doing the same thing to the power steering system
А есть уже коммент что машину нужно перевернуть?
Русские в чате.
😂
This looks like a mercedes transmission. we fill them at idle / while engine is running
The acid laugh was great
The minions
Now that’s MacGyver 😢 good one boys 🫡
Jika anda mengenal macgyver berarti anda sudah tua seperti saya😂😂😂
You still have to cap it fast. 😅
10% this time I wanna see paper clip and bottle that fill up oil quicker😂😊 wanna learn that education 🤔
It's actually pretty funny they're just having fun😂
Joder ,esta buena la idea ,,,yo uso la bomba especial para esto ,es con aire a presión ,,,,buena idea tios ,👍👍👍
Просто молодцы жаль что хозяин не оценил скорость работы
This is a brilliant idea, most mechanic shops have a used powersteering pump lying somewhere that can be used in this case. Being creative and it works. The only thing i would add to this is adding a hanger or a stand to hold the pump without the need of sencond person.
Я бы еще добавил, что неплохо бы объяснить, что делается на видео, потому как не все автомеханики и не все понимают их действия (я не про насос с емкостью, а про то, что они вообще делают)
Заливают масло в коробку@@user-jf8fo9mw6w
@user-jf8fo9mw6w pumped transmission fluid into the transmission
Yea try that see if you still got your front teeth after you torque it down
and also use for counter bleed for clutch boosters it's all around
That’s not a bad tool to make that P.S pump use as a extraction pump aswell
Needs to be primed.
Shit youre right
@@kevfit4333not if you dont care 😮
Not at all
Yeah by taping the top
Тот случай когда доверяете работу чужим людям
Сливное отверстие должно быть с обратным клапаном для такого способа заправки
Не должно ,там насос автоматкоробки не дает маслу обратно вытекать
Well there you go!!! Ingenuity at its finest!!! Good job!
Тридцать лет уже пользуемся таким образом, только у нас к нему ёмкость приварена ( старый огнетушитель) ! Стоит на трёх ножках и есть шланг длинной около двух метров! Заливаем масло в редуктор, коробку!
Но они же я так понял в автомат заливают
Я проще сделал, приспособил пипку к огнетушителю 3литра от колеса и вместо порошка масло трансмисонку, накачал воздух и ау Аля в раздатку и мост 5сек накачал масло
а зачем? заливного отверстия нет?
Список славянских их тоже будет но это у но не будет тоже будет но это будет очень хорошо что будет тоже
So cool 😎
Good idea but an easy way Ive found is use a gallon trans fluid jug. Put a tight fitting hose through the cap to the bottom of the jug and apply a small amount of air through a hole in the handle of the jug and fill the trans. When it’s full some will return back into the jug by gravity. For transmissions without a dipstick tube
But, Does your technique have what it takes to make a RUclips #short?
Corn pop, that was funny. Good one.
Always someone with a better idea. But never applies….. 🦗
Boa ideia parabéns vou tentar fazer isso ...
😮
I have a good used power steering pump from a Range Rover. I’ll be doing this tomorrow.
How did it work out 😂
@@zak-palmer7915he Still Need to decide which Tomorrow lol 😅
@javiertorres9666 hahaha 😆 we talking tomorrow or next mouths tomorrow
All went well thanks
Maybe Friday… or Next Friday… or The Friday after Next….
Голь на выдумки хитра!
Кто знает,тот понял!😊
Wow Qué ingenio Cómo no se me había ocurrido
Real Men of Genius!
I actually heard the song as I was reading that.🎉
Mechanic's having fun at work. Using their wisdom.
Great comment. Instead of putting them down using diplomacy so you don't sound like an *ssh*le, you just complimented them on how it's seen
For all the haters, these guys had a fenominal idea!!! 👍👍👍
It is indeed a phenomenal idea.
Good god
🤦
EXACTLY WHAT I DO TO FILL MY DUNE QUEEN WITH OIL!!! Its a 2003 yz450 with 77 horsepower. You fill it with oil from the frame on the riders left side up by the head tube. Theres a tiny little adorable dip stick too! Love that bike. Last summer i got 112mph on the sand and a 230 foot booter in the same day. Not many bikes can do that. Before you remind me my bike only has a 4 speed gearbox from the factory, i did the WR450 gearbox swap.
Sure you did 😂
@@user-ju1je6hl3z ah yes. Projection. Just because you have the time and imagination to make shit up on a RUclips comment board, doesnt mean i do. To be clear if you ever insinuated at or called me a liar in person, id make you cry for your mommy.
I’ve been using a Honda speedometer gear with the built in pump from a early 90s model transmission for years now. Works perfect.
Lol not a hondo
Почему бы и нет👍
потому что гравитацию никто не отменял
Welcome to new age, where you have to take vehicle to dealership just to check transmission fluid, AND add new fluid
Bought my Explorer before I knew that
좋은 아이디어 다만 펌프내부의 이물질이 미션에 고장이 원인이 될수있으니 주입직전 끝부분에 필터까지 장착하면 더욱더 완벽할듯 합니다
Now that’s what being a mechanic is all about. Adapting to your situation:)
Вапше класс как мастер говорю я тоже так буду делать быстро легко удобно😂
Весело. Красавчики. На заметку.
Work smarter….. not harder
Fantastic idea 👏🏻
This guy deserves a raise 👏
You can use power steering pumps for so many stuff, this one is very smart 😂😂😂
If it works, it works. What a genius 😂
Some of my best times were messing around and having fun with friends at the shop. Those times are long gone
Parabéns pela engenharia aí desta vez a NASA vem
In fact this is when you began to put in work your mind.👍
Wdym
Reverse engineering @@acine2122
Очень даже неплохая идея. Возьму на вооружение.😅😅😅
Блин , парни вы меня удивили . 😂😂😂😂быстро и точно. Но , !!!!есть огромный минус!!!! Механик с этой процедурой должен справиться один.😂😂😂😂
Для этого нужно сделать штатив под насос и всё.
Damn , thanks for the pump hack. Ima build myself one of these ! Brilliant !!!
At first I thought these aren't expert mechanics they're just kids.
The way they are laughing, they came up with that idea
PROBLEM SOLVERS 💡💡💡
Not everybody has to be an expert mechanic to be a mechanic
Muy bien! Aprendí algo nuevo.👏👏
Con que parte se hace esa bomba de transferencia ?
@@eduardocruzmaciel285 no entiendo bien la pregunta pero si te refieres a la bomba que están usando los muchachos es una bomba de dirección hidráulica de algún vehículo mediano.
Old school...doing this at the Nissan dealer back in the 80's......
Great crew with great sense of humor.
Necessity is the mother of all great inventions. 👍
I mean do chicks really need 14inch toys as necessity?
Absolutely brilliant
This man’s needs a raise
I never thought of doing it that way ! Damn smart !
We used to use the old Honda speed sensors that were gear driven
You can get old fire extinguisher for cheap from junk yards. Drill it and solder tire nipple for inflation with air.
Jos iki👍
Main boling gak habis fikri diluar nurul
As long as everything is clean that is an awesome idea.
Many new transmissions have no fill tube or a dipstick to check their fill level
I have two of the same car, one is an '06 the other is an '07. The '06 has a trans dipstick the '07 does not. Their identical down to the tranny model only difference is the color and the seats in the '07 are two tone. It's stupid they did that.
@@TheChefChroniclesall about $$, they want you to bring them in to service them. First thing i look at when buying a new car now. Had a dodge charger with a sealed trans and never again.
@@Smokey.07 That's definitely what it is. I was once to a point where I said I would never buy a brand new car. Now, I'm to a point where I won't ever buy anything past 2012. I'll just stick with my old stuff that I can fix and don't have to pay anyone to do it. I'm really ready to have all the engines and transmissions in all 6 of my vehicles rebuilt so I won't have to worry about them at all for at least a good 20 years.
@@Smokey.07 Actually in the case of transmission fluid it was to cut down on attempted warranty claims by people putting the wrong fluid into the transmission.
Transmissions started to need more specialized fluids. People would put Dexron in a Chrysler etc. Or coolant or other weird stuff, that will wipe out a transmission's clutch packs very fast.
Where wrong oil won't really cause an issue to an engine short term. I addition unless you have a leak transmission fluid level should never change. So a way to measure it wasn't needed. Unlike engine oil which will get burned off slowly by any engine.
Mercedes don’t either
Когда голова работает диплом нахуй не нужен
В данном случае, им просто занятся нечем.
@@user-me7jx3vc1e да понятно, это просто фраза такая типа. Помню как то на выгрузку приехал. А там парни увидели стропы у меня. Говорят, можно использовать для выгрузки. Я говорю, они короткие, не подойдут. Свои, говорю, должны быть. И ушел. Потом они выгрузили все. Говорят, мы справились, когда голова работает диплом нахуй не нужен. Я посмеялся и поехал. Потом смотрю, а у меня все стропы друг с другом связаны и еще затянулись узлы так сильно, от веса груза. Час наверное мучался развязывал. Вот такие профи, без диплома))
This is awesome. I'll be trying this the next time I get up under my car.. Thank you fine gentlemen.
That's why I liked working at Toyota. They furnished the equipment. Like to see how they set the fluid height.
Clever possibly. But a expert would have the right tools to put transmission fluid in a vehicle instead of a power steering pump. But hey, it works. good job 👍
😂😂
Live a little Karen!
I remember when I was up and coming, that would be a tool you buy later in your career cuz on the truck it would cost a fortune, this is genius
How much would that expert pay Snap-on for that tool?
That’s using your head!
Universal pump..i love it..tq make this idea..this will make my job become easier
Lo más espectacular de este video, no es del uso de la herramienta,ni la creatividad; es la risa fresca y espontánea de los participantes, es un goce para el alma.
Pretty good idea,make due with what you have or whatever makes it easier to get the job done.
Pretty ingenious
Thats bloody brilliant 😂 great job guys
Smarter not harder. Whatever it takes to get the job done.😊
Very good idea
Интересно с помощью насоса гура закачивать мало в акпп 9 серии😅
Очумелые ручки😂
Será que eso si está escrito en el manual del vehículo 😢😢😢😢😢😢😢no creo uno deve seguir siempre las intenciones esos son experimentos y habeces funcionan 😢😢
Can confirm... works wonderful.
Great work lads a great way to stop fluid starvation in the hydrologic pump
Sustituyendo lubricante de la caja de cambios
Стружка пошла с таким же смехом😅
Como no el hater de turno…
Hope they back flushed that pump for contaminants or their trans is next.
@@advstreet
Jaaaaaa jaaaaa jaaaaaaa
Excellent idea building one for myself
У меня такой же гайковёрт. Очень нравится, довольно много работы сделал. Правда аккум хороший ставлю.
I new I would be able to use those old pumps I saved for something
Smart. 10/10
Dad and son bonding over the great ideas in the workplace 😂
Now these guys could be my friends you wouldn't even believe it
😂😂смех хитрых гномиков😂😂😂
Фиксики!
I heard a goat there somewhere.
I love tia tias energy really she is so confident
When BMW tells you that you have to bring your car into the dealership for a transmission service...
Okay that's pretty brilliant
That’s a good idea 😮
Смех на уровне изобретения !😂😂😂
👍
Muy bueno 👏👏👏
Desde Argentina 🇦🇷🇦🇷🇦🇷 saludos!!
Kreatywność w tym zawodzie to podstawa
They found dads stash of vintage Saki
Всё гениальное просто 🔥
I used to use a bottle with hose compressed air. One man job
Thats pretty good for real tho
I install a strainer and a stand and you can sell it for big money branded snap on😂
We had something similar in our shop. Although using an old pulley pump is way more cool 😎
Vous êtes des génies messieurs. Bravo
Это Казахстан
Ahhh yes the gears really love you don’t they 😂 they be smelling a bit burnt
Wym ?🤣
That's very clever! I would buy a cheap pump for each liquid so there's no contamination. Genius man, Genius!
What do you know about contamination? What fluids would you be pumping that a vehicle uses That it would be so necessary to have separate pumps to avoid the slightest possibility of contamination?
The answer is not Dot 3 don't say brake fluid because you wouldn't use the pump as that would be retatted to use a power steering pump to fill brake fluid.
Other than that all oil-based fluids would be fine with you draining the pump then switching fluids pump through an ounce or two to your waste oil then start using the pump.
Heavy duty fleet mechanic 20 plus years.
I get the feeling your automotive repair stories are all from high school shop. And you dream or think about working on your own cars but you never do.
I'm I spot on?
@@Cyber_Cowboy wow! Over reaction much!? Go take a soothing bath in all that 80w90 gear oil you've been not contaminating with brake fluid. Just relax I'm sure there's a Detroit diesel somewhere that needs your help, because I don't need it. Stick to struggling with your kingpins and your boss will appreciate it. Since you made an assumption about me, let me make one about you. I bet you drive a light duty truck(domestic ofcourse like a tundra) that runs on deer blood and Copenhagen spit because you spend your money on cigs, chew and Busch light. I would even assume you would keep that scrotum ornament thing over your rear-end if your were allowed to. Am I right on any of those? relax brodozer, there are more automotive fluids out there than just ATF, DOT3 and conventional motor oil.
Well ,I'm with my potty break. I should really get back to shopping for power steering pumps.
👏🏻👏🏻👏🏻👏🏻
One addition will be a hose in rhe inlet so uou can put it in any kind of jug to extract the fluids
This is a gem!
Is that Oil pump? 😂
Power steering pump
Oil pump??? Really??😅
Adapt and overcome, worked just fine
That’s one way to do it! Brilliant
Thank you for Intel. I'll be making one myself. I've been using a hand pump.