S2E24 Saturn SC1 gets a Kubota D722 Diesel engine swap. Today we fabricate the clutch
HTML-код
- Опубликовано: 15 окт 2024
- Season 2 Episode 24. In today's episode Jimbo takes the audience on the arduous journey of getting the Saturn S series clutch to fit the Kubota D722 diesel engine. This complex problem is solved with help from Jimbo's friends over at Central welding in Hutchinson Kansas. Tune in and see the rest of the story.
The walls in our new studio are bare, if you want to send swag please send it to:
Robot Cantina
207 S. Sedgwick Ave
P.O. Box 28
Haven KS, 67543
![Oscar Maydon x Fuerza Regida - Tu Boda [Official Video]](http://i.ytimg.com/vi/_ymicn0_GYc/mqdefault.jpg)
I'm a mechanic who mainly works with kubota engines only. I've been wanting to do a swap like this just for the sake of seeing how long it will last. In the last 10 years of me being working with these engines, none of them have ever failed given the proper maintenance. Only had to replace 2 due to user/owner error.
Love this series :p keep at it
love this series and ROBOT CANTINA!!💖💖💖💖
I would love to marinize a Kubota diesel for my sailboat when my Yanmar 3GM30f dies. Its 26 years old, consumes some oil, but still runs well
Do you know what the difference in internal parts are between the DT722 and the D722? I have to rebuild mine and if I have to replace parts I might as well upgrade it to the turbo parts if there is a difference.
I’ve never seen a Dt722 only non-turbo, but once i had to swap a turbo from a dt1505 to a d1505. That did require some drilling for the oil return line which wasn’t in the non turbo block. Also the injectionpump needed some adjustment since it didn’t know it was now running a turbo. Internally i hardly can imagine any issues since these blocks are so durable. Anyway, of you also install an oil cooler and don’t have any pressure on your oil return line you should be in the clear. That d1505 is still running so its possible
In case you want to do a turbo upgrade that is. Cannot imagine why else you would upgrade the internals
As somebody who's struggled through engine swaps, here's some advice: Remember that when the clutch wears, the pressure place fingers move OUT towards the throwout bearing. When designing your adapter, be sure to make it like 1/8" to 1/4" thicker than the depth required to rest the throwout bearing against the pressure plate fingers with a new clutch. Otherwise, as soon as the clutch breaks in, you may find your clutch slipping just from the static pressure of the fingers against the fully retracted throwout bearing.
Good point! thanks
@@robotcantina8957 The road of life twists and turns and no two directions are ever the same. Yet our lessons come from the journey, not the destination.
@1776 American Proud If you can fart in front of somebody, you know that they love you.
In the movies, every crazy old fart needs a cool old car. Jack Nicholson drove a spiffy yellow 1970 Dodge Challenger two-door in 'The Bucket List.' In 'Gran Torino,' the cranky pensioner played by Clint Eastwood not only owned a 1972 GT Sport, he also used to build cars like that at the Ford plant.
My dad was a very unconventional Asian American man. He was very much not quiet, not shy, not passive. If he had to fart, he'd do it in the library. He did not care. He was like, 'I don't know these people. I'm uncomfortable, and I need to let it go.'
Kubota uses German letters to enumerate the number of cylinders a particular engine has.
I was told by a Duetz service manager this was because in the early days , Deutz had provided cast blocks / heads for Kubota
E = Eines = One
Z = Zwei = Two
D = Drei = Three
V = Vier = Four
Also, the last # 2 in the D722 isn't displacement, it is a designation code for stroke ( in this case 68 mm ) so the " advertised approximate displacement " is 720 CC and 719 CC actual .
“Knowledge is of no value unless you put it into practice.”
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
This is such an interesting swap. I hope you’ve planned for a turbo!
It’s a diesel kinda seems obvious
you know he's got that planned
I agree!
In part 1 he mentioned using boost to fix the rich or rolling coal issue once he gets it going so he definitely is!
He might go for a supercharger (stupid-charger) instead of a turbo. That's what he did last time.
It's always a good thing to keep a friendly, tamed CNC machinist on hand, especially when supplied with a decent mug to store his coffee in... :P
Nice!
@@dangerousdave5915 We all really love ROBOT CANTINA!!!👍👍👍
@@kansasrose2909 Indeed we do!
This is one of the best engine swaps I’ve watched. We all know you can slap in a big motor and get power. Swapping for efficiency is super interesting.
Less is more!
@@magnulof “Knowledge is of no value unless you put it into practice.”
@@kansasrose2909 Love Is In The Air
In the rising of the sun (of the sun...)
Love Is In The Air
When the day is nearly done (is nearly done...)
Back in the early 80"s a designer put a 17HP 3 cylinder Kubota diesel in a car and got 128mpg (at 35mph I believe). An article was published about it in Mechanix Illustrated magazine. The frame and running gear was from a Triumph Spitfire car and the body was custom fiberglass over foam. Robert Q Riley Enterprises was the guy and he designed a lot of neat vehicles. Unfortunately he was a one-man business and he died a couple of years ago. You can still google his business and find a copy of his website with all the vehicles. I don't believe you can order plans anymore.
I saw somthing similar with a small industrial diesel engine in a locost kit car that had some extra bits to reduce air drag. 100+mpg is pretty neat and by no means is a miracle if you can accept driving a very lightweight and low power vehicle.
Glad to see the Kubota finally getting close to really being used for something.
No updates this time on your hearing, did that improve at all?
i had the same problem at the same time he did, for the same reasons. mine got better, so im assuming his did to.
What was the cause of this affliction, did Jimbo elaborate on this?
@@jeffcard3623 He said 'alergies' when he first mentioned his hearing loss.
Welding is a valuable skill and almost anyone can learn to weld, cut, or shape metal. That's the starting point for this completely updated, supremely practical, and informative resource which, through tips, suggestions, and fault finding, helps the first timer improve and the intermediate welder expand their technique.
Discover everything you need to know to learn hands-on welding, and start repairing and creating metal equipment and structures, with practical instructions for:
Cast Iron Welding
Pipe Welding
Hardfacing
Soldering
Welding Plastics
Metal Identification
Welding Safety
Workshop Techniques
Drill Sharpening
Taps and Dies
Basic Blacksmithing
Different ways to ensure safety before, during, and after every welding operation.
Other Welding processes such as Plasma Arc and Oxy-fuel cutting.
How to make 3D patterns with your weld.
How to advance your welding skills by doing repairs.
@@ocdman202 HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
I work some with Diesel engines at my current job and I have learned a lot - greatly enhancing my abilities in the maintenance of our bus fleet. Hoping this knowledge will be the start of bigger and better things.
By anchoring the new habit to a swift and desirable reward, you signal to your brain that the habit is worth doing.
I have already begun to use the small habit system and have more faith than ever that I will be able to stick to whatever habit I want to do in my life. I have always been a hostage of procrastination, laziness, and would always punish myself for not doing the most basic things. Now that I see them as habits rather than chores, tasks or things I have to do, it’s a lot easier for me to do things that before seemed impossible.
To summarize, a mini habit is a VERY small positive behavior that you force yourself to do every day.
We're quick to blame ourselves for lack of progress, but slow to blame our strategies.
Mounting engines to transmission that were never intended to go together is the biggest black box of mystery in my mind but I love thinking about the combinations. It's good you found a machine shop that was willing to work on this. Seems like allot of machine shops aren't interested in doing anything cool like this; I've shopped around.
An expansive mood is one in which a person is able to think and feel broadly, envisioning new possibilities and encountering people with a generous spirit.
I love your comments! Very uplifting!
@@dangerousdave5915 “To accomplish great things, we must not only act, but also dream; not only plan, but also believe.”
“There is only one thing that makes a dream impossible to achieve: the fear of failure.”
“It is only when we truly know and understand that we have a limited time on earth - and that we have no way of knowing when our time is up - that we will begin to live each day to the fullest, as if it was the only one we had.”
“I have had dreams, and I’ve had nightmares. I overcame the nightmares because of my dreams.”
We are a small engine repair shop, and a commercial outdoor Power equipment dealership.
I extremely familiar with this little "torque monster" and really looking forward to seeing your final results when fully installed !
So glad you are taking the time to pay attention to detail !
It/they can and will make or break your project success !
And, it will be a successful project !
Great job guys, looking forward to seeing your final results ! 🇺🇲
And the world cannot be discovered by a journey of miles, no matter how long, but only by a spiritual journey, a journey of one inch, very arduous and humbling and joyful, by which we arrive at the ground at our own feet, and learn to be at home.
International Harvester built a truck in the late '60s that used a straight six gas tractor engine. 2400 rpm max, 35 to 40 miles per gallon because of some really tall final gearing. Pull hard all day long.
The Kubota engine isn't designed to have thrust on the crankshaft. The pressure from pushing in the clutch will put forward thrust on the crank and damage it. Somewhere in the service manual for the engine it says not to side load or put thrust on the crankshaft. It's only supposed to drive a splined shaft that is supported by bearings to take the force of the thrust.
It just keeps getting better.. I really love diesel engines. That little Kubota is a beauty.
GREAT TO SEE YOU AT 102K SUBSCRIBERS JIMBO! Congratulations, your hard work and fun videos resulted in celebration!
I love this channel. Very interesting projects in very great detail. Perfect for learning and/or inspiration for diy!
for people with limited knowledge of small four stroke engines, however two stokes engines are not covered in as much detail. Ideal for people who want to have a better understanding on how these small engines work. Great for small motor heads who like to take care of their small engines on lawnmowers and other equipment.
CONGRATULATIONS JIMBO..105k subscribers!!👍👍 ROBOT CANTINA is providing the fun and
educational content that viewers enjoy! Let's keep that number rolling on up! THANKS TO YOU JIMBO!~
my 14 year old grandson, he is interested in all things mechanical. He has enjoyed playing with the lawnmower and weed whacker and using the book as a guide. So far everything still runs, so I guess he's doing OK. I explained to him that not all engines are the same, but the principles still apply, so learn the basics and build from there. He is enjoying learning, and I am enjoying watching him build his confidence and library of knowledge. Nothing beats hands-on experience and instant gratification when you pull the cord and the engine fires up! I think it's the only Christmas gift he got that he is still using.
My 10 y/o son now has first hand experience of taking an old nonworking snowblower apart, making some repairs, and experiencing the thrill of blowing snow with a machine that he worked on with his own hands!
It made me understand how a small engine works and fixes/maintenance to these machines now are more intuitive
My grandkids are really interested about how cars work. I was trying to explain to them, but I was not doing a good job explaining
Good for learning the mechanical parts and how they fit and work together. Doesn’t really give more depth on difference between flat, straight 6, V8, V10, etc. so understanding things like “naturally aspirated” engines are somewhat curt in explanation. Essentially it’s car engineering 101 great for those with little or vague knowledge of automotive engineering.
I'm a recent mechanical engineering graduate and I (embarrassingly) was never that familiar with car engines. I perform all basic maintenance myself, but have never really done any in-depth repairs out of a combination of laziness and unfamiliarity with engines. Learning the basic 4-stroke engine cycle is one thing, but knowing how an engine and entire automobile is put together is a whole 'nother story.
Absolutely love this series - the amount of ingenuity required to do things that were never meant to be done is incredible and you always make it entertaining!
“Science can amuse and fascinate us all, but it is engineering that changes the world.”
@@mommapanda5736 HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
"Good business leaders create a vision, articulate the vision, passionately own the vision, and relentlessly drive it to completion."
-Jack Welch
You have to come up with a vision and make a plan for it. After that, you have to work hard in order to achieve the goal.
I'm glad you managed to use a proper clutch on this project! Hopefully it will help the overall efficiency of this drivetrain!
This is some good information. Thank you so much for sharing!
@@ocdman202 Congratulations Robot Cantina! Each video is better than the last.... You continue to provide the fun videos that
we are craving.... I can't wait for the video this weekend!~👍👍👍👍 Congratulations on 108k SUBSCRIBERS!!!
“It’s another glorious day in the corps. A day on the farm. Every meal’s banquet, Every paycheck a fortune, Every formation’s a parade! I love the corps.”
-Sgt. Apone
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
Do a Good Turn Daily.
This is the slogan of the Scouts.
Some Good Turns are big - saving a life, helping out after floods or other disasters, recycling community trash, working with your patrol on conservation projects.
But Good Turns are often small, thoughtful acts - helping a child cross a busy street, going to the store for an elderly neighbor, cutting back brush that is blocking a sign, doing something special for a brother or sister, welcoming a new student to your school.
A Good Turn is more than simple good manners. It is a special act of kindness.
The engine that you pulled up 2:09 happens to be a Nitrostar G3.0 and that model is the 15105 variation and I know that because I collect and rebuild “vintage” HPI firestorm 10T nitro cars and I literally have that exact motor on my desk in front of me ready to be rebuilt.
There’s an interesting gasoline 3 cylinder Kubota that shares architecture with the diesel 3 cylinders. I serviced a lawn mower once that had the gasoline version, it sounded like a diesel and tan very smoothly
“Science can amuse and fascinate us all, but it is engineering that changes the world.”
“I think that the power is the principle. The principle of moving forward, as though you have the confidence to move forward, eventually gives you confidence when you look back and see what you’ve done.”
One of my children was struggling to learn to read. I was talking to their teacher about how we were working on reading at home, and she said, in the kindest way, “Remember that your relationship with them is number one”. It was a really good reminder, and I think it can be applied to a lot of different parenting challenges.
My advice is to make it easy for your kids to be good. If you’re going somewhere where you will have to sit and wait, bring something quiet for them to do. Carry snacks wherever you go - hunger does not promote good behaviour
Encourage and support your kids because children are apt to live up to what you believe of them.”
“When your children are teenagers, it’s important to have a dog so that someone in the house is happy to see you.”
“My daughter told me I looked like a piñata and I take that as the highest compliment.”
“You can learn many things from children. How much patience you have, for instance.”
I love books. I adore everything about them. I love the feel of the pages on my fingertips. They are light enough to carry, yet so heavy with worlds and ideas. I love the sound of the pages flicking against my fingers. Print against fingerprints. Books make people quiet, yet they are so loud.
I like my kindle! It's light and easy to read. To each his own!😁😁😁😁😁
@@dangerousdave5915 “I choose my friends for their good looks, my acquaintances for their good characters, and my enemies for their good intellects.”
@@mommapanda5736 WoW! You're one tough Momma! 🐼🐼🐼
I was watching the video and an ad came up for something called Markforged. It's a metal 3D printer that you can make engine parts out of! You should look into this!
The weights of the cars at the end was a wonderful add on!
😁
@dis emboweled : Now some desk chair hp and acceleration calculations can be done.
"Planning is bringing the future into the present so that you can do something about it now."
- Alan Lakein
When you plan for the upcoming things, you are actually living in it. It is therapeutic to live in your dream. You need to keep yourself in the reality also.
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..👍👍👍👍
Books are not made for furniture, but there is nothing else that so beautifully furnishes a house.
This is some good information. Thank you so much for sharing!
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
The weight of 2 flywheels is going to make acceleration more lackluster than it should be. Too bad with all that work that you didn't decrease the rotating mass to closely resemble the Kabota flywheel alone. Some weight reduction could be accomplished via machining away material and/ or lightening holes or even reproducing one out of aluminium.
I really like diesel and always believed they should be more utilized in this country to power small cars and pickups.
Good luck !
Ya, I would have had a new flywheel made and utilized the starter ring of the Saturn. Made a new adapter plate that bolts to the engine block, replacing the stock one. Then utilize the Saturn starter if the Kubota didn't work. Live and learn.
The extra mass is going to help when starting out, especially on a hill.
I want to see how much power can be squeezed out of this little engine, I’ve thought about swapping one of these into a vw beetle
We often fantasize about the life we wish we had, while overlooking many of the great parts of our current life. We have to learn to appreciate the good parts of our life now before we can appreciate anything that the future may hold.
Instead of trying to imagine what you’d like to do with your life, take account of the things you currently enjoy doing. What are the things in your life that are most important to you…
Its also used in marine applications i repowered my 91 catalina 28 with a universal m3-20b witch is based off d722 kubota. I have a extra block and head and some spare parts that u are welcome to if needed. Really cool experiment.
“I think that the power is the principle. The principle of moving forward, as though you have the confidence to move forward, eventually gives you confidence when you look back and see what you’ve done.”
I designed performance clutch kits for a reputable aftermarket manufacturer for 7-years. I approve of the design.
Also the flywheel was made in Ningbo and shipped to the US directly. It is top quality.
Pretty cool to see you are local. I've been keeping up on you're swaps. Good job
I'll just add a project from Jack McCornack I enjoyed following. He used a Kubota D-1105T and adapted it into a homebuilt Locost 7 (Lotus 7). Your video brought back memories and appreciation of how you both made creating a successful engine adapter look relatively easy. :) Bravo.
“I think that the power is the principle. The principle of moving forward, as though you have the confidence to move forward, eventually gives you confidence when you look back and see what you’ve done.”
Always an entertaining watch, thank you for going the trouble to film and edit those experiments I wouldn’t dare to even do
“Science can amuse and fascinate us all, but it is engineering that changes the world.”
‘If you go to Japan, you have to take the train and go visit different capital cities. Just sticking to one city would be a shame, considering how easy it is to get around. Tokyo, Osaka, and Kyoto all have different vibes and sights.’ - Ronny Chieng
Good to know!
Don't tell him how to live his life...
Isn’t there still radiation present when we bombed the country?
wtf you talking about?
@@SooSmokie “Setting goals is the first step in turning the invisible into the visible.”
Got a Kubota diesel in my bobcat, never thought of it but I guess they can work in cars too
This is some good information. Thank you so much for sharing!
Best show on RUclips! Can I have a Robot Cantina cup?
soon...
@@robotcantina8957 I agree with Jeff above. I did like weekly episodes best but I know it is a ton of work - so when I sat down to watch this week I was soooooooooo sad when it was not here.
Glad you squeezed it out!
Lastly - I have some ideas for that cup Jeff and most of us are "Jonesn' for.... Let's talk.
Makes we want to pull the four cylinder Kubota engine out of the old refer trailer I have and stick it my Mazda B2300 pickup. I guess I keep watching Jimbo here and see what kind of trouble he gets into. 😂
@@cullenmiller8170 omg those cups!!
@@kansasrose2909 If your channel was a stock, I'd invest.
Robot Cantina, I've had a crazy idea for a long time for a Steam/gas hybrid car. Not sure if it's possible but my idea is running the exhaust manifold into a water boiler much like how the coal fire is fed through the heat exchanger in a steam engines boiler. And then use a steam engine that engages a clutch when pressure has been reached to assist the gas engine.
My other take on exhaust gas energy recovering is running a turbo on the exhaust, but instead of turning a turbine for the intake it spins an electric generator that directly powers an electric assist motor on the engine.
These are both fantastic ideas!
@@mommapanda5736 you could also have a water injector in the cylinder to absorb some of the excess heat and generate extra pressure from the steam produced during the power stroke. I can't imagine such a thing would be compatible with a catalytic converter though.
The exhaust gases would be cooler as the heat absorbed to generate steam would in theory increase an engines thermal efficiency.
Awesome! It looks like the adapter plate will be pretty straight forward. Or sideways, depending on how you look at it.
“Knowledge is of no value unless you put it into practice.”
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
Hell yeah the big D episode! That is some beautiful machining by the shop. Can't wait to see the adapter plate you cook up for mounting the transmission! Great job as always, love watching these projects unfold.
The road of life twists and turns and no two directions are ever the same. Yet our lessons come from the journey, not the destination.
“When your efforts run in the face of conventional wisdom and accepted mastery, persistence can look like madness. If you succeed in the end, this extreme originality reformulates into a new level of mastery, sometimes even genius; if you fail in the end, you remain a madman in the eyes of others, and maybe even yourself. When you are in the midst of the journey…there’s really no way of knowing which one you are.”
Nothing is impossible in this world. Firm determination, it is said, can move heaven and earth. Things appear far beyond one's power, because one cannot set his heart on any arduous project due to want of strong will.
Once turbocharged and tuned it should make around 50HP. Reaching probably 80+mpg
Maybe something to consider is two flywheels adds more rotation mass making it harder for the engine to rev up. And diesels don’t work like gas, you let off the throttle it’s going to take longer for the engine to return to idle. Cool idea tho to put a little diesel engine in a passenger car, keep up the good work.
I was thinking about this, flywheel weight has increased quite a lot, I guess performance will be affected.
@ An artist's duty is rather to stay open-minded and in a state where he can receive information and inspiration. You always have to be ready for that little artistic Epiphany.
I hope we get a chance to see a turbo added to this motor at a later date, I think you could nearly double the output.
I'm currently looking at adapting a D722 to a ditch witch 2300. Great video!
‘I love Japan. I love the collision of the modern and ancient worlds coming together in that place. It’s so high-tech and cool.’ - John Lasseter
For millennia, scientists and technologists have been scouring the natural world for clues on how to live longer. But is anyone any closer to finally defeating aging?
‘Japan, not only a mega-busy city that thrives on electronics and efficiency, actually has an almost sacred appreciation of nature. One must travel outside of Tokyo to truly experience the ‘old Japan’ and more importantly feel these aspects of Japanese culture.’ - Apolo Ohno
If Japan is enigmatic, then Tokyo is the heart of that riddle, its rhythm and essence so utterly alluring that it demands to be explored. It has a depth that keeps travellers in a constant state of rapture and delight. Whatever your vice, Tokyo has you covered.’ - Michael Ryan
‘Tokyo is like the New York of Asia. Although the people there are all basically from Japan, they celebrate what they like about various cultures.’ - Pharrell Williams
‘More than any other city, Tokyo demonstrates that ‘city’ is a verb and not a noun.’ - Toshiko Mori
Like watching your videos about your little shop and your car’s thought your Honda was neat and you are moving ahead with the Saturn hope your hearing improves.
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..👍👍👍👍
I wanna see this baby in the car running. With the TURBO.👍👍👍👍
I started watching since you were putting that EFI kit on the 420cc big block. This is a brilliant series.
CONGRATULATIONS JIMBO..105k subscribers!!👍👍 ROBOT CANTINA is providing the fun and
educational content that viewers enjoy! Let's keep that number rolling on up! THANKS TO YOU JIMBO!~
I don't have scientific data, but I think plenty of perfectly nice weekends are being given over to the binge craze. We are binge - watching videos from ROBOT CANTINA😛😛😋😋
@@kansasrose2909 Gratitude unlocks the fullness of life. It turns what we have into enough, and more. It turns denial into acceptance, chaos to order, confusion to clarity. It can turn a meal into a feast, a house into a home, a stranger into a friend. Gratitude makes sense of our past, brings peace for today and creates a vision for tomorrow...
"Things are never quite as scary when you've got a best friend." Bill Waterson, American Cartoonist
"You expected to be sad in the fall. Part of you died each year when the leaves fell from the trees and their branches were bare against the wind and the cold, wintery light. But you knew there would always be the spring, as you knew the river would flow again after it was frozen. When the cold rains kept on and killed the spring, it was as though a young person died for no reason." - Ernest Hemingway, A Moveable Feast
“What’s behind me is not important.” - Raul Julia as fictional Italian racer driver “Franco” in the 1976 low-budget movie “The Gumball Rally.” As he utters the line, he rips the rearview mirror from his 1972 Ferrari Daytona and cavalierly tosses it over his shoulder
This project is great! I hope that powers the Saturn well. I imagine mpg will be surprising and the turbo up grade will be interesting to see how the power is affected.
“Knowledge is of no value unless you put it into practice.”
@@kansasrose2909 Love Is In The Air
In the rising of the sun (of the sun...)
Love Is In The Air
When the day is nearly done (is nearly done...)
A good library will never be too neat, or too dusty, because somebody will always be in it, taking books off the shelves and staying up late reading them.
.Lean into the unknown. For some people (myself included) not knowing what lies ahead can often be a scary thing and that is usually because we have come to expect the worst. When you shift your focus to expect the best in life, there is no need to fear the unknown. Instead, you can lean into it with the same sense of wonder and magic you had as a child. The world is full of amazing opportunities and when you expect the best, that's exactly what you receive..
Always tighten your clutch up in a star pattern even when test fitting. That's a great way to damage a pressure plate.
Going round and round slightly tightening bolts works just as well. the goal is not to run any single bolt from loose to tight in one shot.
@@bobroberts2371 Not a single experienced technician would tell you that's correct.. I bet you think you can do the same thing with wheels too.
@@mastermnd22 Wheels need to be in a star pattern because the center of the wheel needs to flex during tightening ( like a belleville washer ) . This spring action prevents the lugs from loosening during use.
A clutch cover isn't coined so round and round isn't an issue. And. . . .if you are doing clutch cover in a star pattern from loose to tight in one shot , that will bend the cover. The goal is to evenly apply pressure so the cover ears are not bent in the process. Round and round with a couple of turns per bolt accomplishes this goal.
I have the same engine I will be fitting a drive clutch to and installing in a 6 wheel drive amphibious UTV called a Max II made by Recreative Industries. I’ve gotta do a full rebuild on my D722 though. It was improperly stored and water got into the cylinders.
Did you try putting it in a bag of rice?
@@ShainAndrews
🤣🤣🤣
I sure wish it was that easy! The cylinder is almost guaranteed to be pitted by the rust.
So this is one of those "dual mass flywheels" I've been hearing about
"Life is not perfect but your hair can be."
Books are the quietest and most constant of friends; they are the most accessible and wisest of counselors, and the most patient of teachers.
“Knowledge is power, community is strength, and positive attitude is everything.”
“Live simply, love generously, care deeply, speak kindly, leave the rest to God.”
Love Is In The Air
In the rising of the sun (of the sun...)
Love Is In The Air
When the day is nearly done (is nearly done...)
That was some mad machining. This is one of your best projects yet 😂 I always love these funky swaps. Really cool stuff, can't wait to see it finished.
“Successful people ask better questions, and as a result, they get better answers.”
@@kansasrose2909 “Goals are like magnets. They’ll attract the things that make them come true.”
@@mommapanda5736 The road of life twists and turns and no two directions are ever the same. Yet our lessons come from the journey, not the destination.
Diesels and turbos go together like peanut butter and jam. 😎
Everyone has the talent to some degree: even making a peanut butter and jelly sandwich, you know whether it tastes better to you with raspberry jam or grape jelly; on chewy pumpernickel or white toast.
I could go for a sandwich, but I’m not gonna open two jars.
I mostly eat peanut butter sandwiches. Peanut butter and banana, peanut butter and jelly, peanut butter and potato chips, peanut butter and olives, and peanut butter and marshmallow goo. So sue me, I like peanut butter.
I actually put peanut butter on my bagel. I really like peanut butter and I like to ruin the bagel. You know what's even crazier that I do sometimes? I do cinnamon raisin bagels with peanut butter. It is really, really out there!!!
You can spread jelly on the peanut butter but you can't spread peanut butter on the jelly😜😜😜😜
Johann Wolfgang von Goethe once commented that: “When eras are on the decline, all tendencies are subjective; but, on the other hand, when matters are ripening for a new epoch, all tendencies are objective. Each worthy effort turns its force from the inward to the outward world.”
sounds interesting....
Cultivate an attitude of gratitude. Gratitude is the foundation upon which magic is born. It makes even the tiniest morsels of joy worth celebrating and makes you a magnet to attract more incredible experiences and opportunities to you. Never underestimate the power of a simple 'thank you' to another person or to the Universe. It makes all the difference in the world.
Lean into the unknown. For some people (myself included) not knowing what lies ahead can often be a scary thing and that is usually because we have come to expect the worst. When you shift your focus to expect the best in life, there is no need to fear the unknown. Instead, you can lean into it with the same sense of wonder and magic you had as a child. The world is full of amazing opportunities and when you expect the best, that's exactly what you receive.
“We tend to forget that happiness doesn’t come as a result of getting something we don’t have, but rather of recognizing and appreciating what we do have.”
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
"It's the first day of autumn! A time of hot chocolatey mornings, and toasty marshmallow evenings, and, best of all, leaping into leaves!" - Winnie the Pooh, Pooh's Grand Adventure
You could use a BMW motorcycle clutch - there are quite a few motorcycle engine swaps in Europe using that motor and the BMW motorcycle transmission.
ruclips.net/video/03zBDROK7TA/видео.html
@@DaveSluggy Congratulations Robot Cantina! Each video is better than the last.... You continue to provide the fun videos that
we are craving.... I can't wait for the video this weekend!~👍👍👍👍 Congratulations on 108k SUBSCRIBERS!!!
I'm loving this dude..... MORE!!!
Jimbo, please keep making these great videos!
I don't have scientific data, but I think plenty of perfectly nice weekends are being given over to the binge craze. We are binge - watching videos from ROBOT CANTINA😛😛😋😋
@@kansasrose2909 Gratitude unlocks the fullness of life. It turns what we have into enough, and more. It turns denial into acceptance, chaos to order, confusion to clarity. It can turn a meal into a feast, a house into a home, a stranger into a friend. Gratitude makes sense of our past, brings peace for today and creates a vision for tomorrow...
@@ocdman202 Although Thanksgiving comes but once a year, every day should be a day of thanks.
Hutchinson is my hometown, that was a pleasant surprise to hear! Don’t know your buddy Scott though.
Apple Pie Martini
Everything you love about the classic fall dessert-in drink form! This cocktail is a must during the holiday season.
Why not use a smaller clutch assembly to reduce rotational mass? Also that Kubota flywheel looks a lot like a Mitsubishi/Hyundai bolt patern. I know the 2005-2010 Hyundai Accent's flywheel uses an 8 1/2" diameter clutch disc and a 5 bolt flywheel patern with a small ring gear with 106 teeth. So if the Saturn clutch disc is 8 1/2" and the Kubota flywheel has a Mitsubishi 5 bolt patern, then your best bet is to use a 2010 Hyundai Accent flywheel with your Saturn clutch kit. Just saying.
I recall a similar Kubota engine in a lawn tractor....... it was many years ago, but I suspected that engine was similar to what would be used on a mower.... and I guess I wasn't wrong.
Love the project, but have to add, installing a pressure plate should be a much more carful process than going in a circle with an impact. The spring section can be very sensitive to asymmetric loading. If you look at the plate and the fingers aren't all the same height, you know you've killed it. that feeling sucks when you just bought a really nice aftermarket flywheel. couldn't have been me, that's for sure.
Now this really caught my attention! I've been wanting to swap one into a Kei truck but zero idea how to do so...
"Life is not perfect but your hair can be."
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..👍👍👍👍
“Have a wonderful weekend! Do what makes you smile and be happy!”
Back at the ol’ lighting site, I used to write about a RUclipsr called Robot Cantina. The host behind the channel works with some downright silly ideas, like pairing a Honda Insight with a Harbor Freight Predator engine and trying to have a working car out of it. On a recent night, I decided check in on what’s going on. The wacky host has gone further with the Harbor Freight Insight project, adding a supercharger and trying to hit 70 mph. And then he decided to power a Saturn with a lawnmower carburetor.
@@mommapanda5736 HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
@@kansasrose2909 Although Thanksgiving comes but once a year, every day should be a day of thanks.
@@mommapanda5736 My idea of Christmas, whether old-fashioned or modern, is very simple: loving others. Come to think of it, why do we have to wait for Christmas to do that?
You will HAVE to weld the diff on the saturn transmission. they are notorious for exploding under power and the pin has been known to exit the transmission case.
I also want to add, the dohc manual transmission has shorter gearing. I think with the significantly lower rpm of the diesel, it may give you better results as well.
@@Azov237 "Life is not perfect but your hair can be."
“I’d always been scared of people with tertiary education and high intellects in case they found me wanting. I thought they viewed me as just a welder who knew a few jokes.”
Billy Connolly
“Science can amuse and fascinate us all, but it is engineering that changes the world.”
The history of engineering is really the history of breakages, and of learning from those breakages. I was taught at college ‘the engineer learns most on the scrapheap’.
Nice! I am working on a similar oddball swap. I think I'll need to go a similar route to mate my air-cooled Fiat 500 engine to a Volvo M45 transmission...
Play! There is nothing more magical than letting loose and having a bit of fun. Life is an adventure that is meant to be enjoyed, so grab your bucket list and start ticking things off and if you don't have one, make one! Give yourself permission to have fun every single day and watch how it shifts every area of your life for the better.
“The only impossible journey is the one you never begin.”
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
“Success is the fruit of good ideas pursued with energy, intelligence, and determination.” No wonder you’re doing so well! Congratulations, Alex!
Well done! Your hard work and determination have paid off. I’m so proud of you, Logan! Congrats!
@@kansasrose2909 I know who Jimbo is but who is Alex and who is Logan?
@@ocdman202 "Coworkers are like Christmas lights. They hang together, half of them don’t work and the other half aren’t so bright." -
"Opportunity is missed by most people because it is dressed in overalls and looks like work." -
If you're getting those bolts from McMaster they are probably Holo-Krome brand (mine were), and if that is the case they directly state on their website: *All HOLO-KROME products are made in the USA*
Idk why but I love this concept Kubota makes some good stuff.
“Science can amuse and fascinate us all, but it is engineering that changes the world.”
It would be interesting to see what kind of fuel economy you get with this in the car at cruising speeds, before doing anything crazy like forced induction. I was thinking of getting a small Kubota for my first-gen Insight if/when the engine finally wears out.
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..👍👍👍👍
Your learning has taught many valuable lessons to others. Congratulations on this one!
Congratulations mate, you have set the benchmarks for others to follow!
You have achieved another bigger milestone. Congratulations!
Congratulations, may you always get good opportunities and utilise them to conquer the world. Best wishes!
Your ambition, your goal and your hard work paid off really well. May you always find happiness in what you do, congratulations!
“What I love about Thanksgiving is that it’s purely about getting together with friends or family and enjoying food. It’s really for everybody, and it doesn’t matter where you’re from.”
“The more we express thanks, the more gratitude we feel. The more gratitude we feel, the more we express thanks. It’s circular, and it leads to a happier life.”
“I love Thanksgiving because it’s a holiday that is centered around food and family, two things that are of utmost importance to me.”
“Gratitude is the sign of noble souls.”
@@kansasrose2909 My idea of Christmas, whether old-fashioned or modern, is very simple: loving others. Come to think of it, why do we have to wait for Christmas to do that?
Sometimes there are some great benefits to living near the Air Capital and having nearly unlimited amounts of small-run machine shops
LUK are an OEM supplier for many European automakers. You did get a good quality part 🙂
I'm pretty sure Luk is oem saturn too
Not sure what my fascination is with Diesel engines in this EV world but love the build now that it’s moving to a stink motor.
“Engineering is not merely knowing and being knowledgeable, like a walking encyclopedia; engineering is not merely analysis; engineering is not merely the possession of the capacity to get elegant solutions to non-existent engineering problems; engineering is practicing the art of the organizing forces of technological change… Engineers operate at the interface between science and society.”
“So, the guy shows me the deck he’s built. And I’m like, ‘I’ll call this a deck if it’ll make you happy… but this is just a porch without a roof.'”
HEY JIMBO..... congratulations on reaching 100k subscribers.. ROBOT CANTINA is providing the
entertainment and fun that viewers enjoy..
I have a bx23s that has a Kubota D902 engine with 23 hp so im curious how this turns out. You earned my subscription !
Love this channel... 👍👍
Nice, for a new project can you make a diesel electric Saturn?? just like a diesel electric locomotive, i have never seen anything like that in a car
“Engineering is not merely knowing and being knowledgeable, like a walking encyclopedia; engineering is not merely analysis; engineering is not merely the possession of the capacity to get elegant solutions to non-existent engineering problems; engineering is practicing the art of the organizing forces of technological change… Engineers operate at the interface between science and society.”
Hey Mr. Robot! I’ve been wanting to this exact thing for about five years, but I’m in no position to, so thank you for making my imagination a reality!
One of the coolest swaps
We love ROBOT CANTINA!!😚😚😚