I turned the web upside down while searching for 2016-present Honda fob programming before I purchase a Autel AP200 Scanner, I wanted to be sure that the AP200 can program Honda keyless fobs. When I found your video I was not disappointed despite the fact that you used a different but similar tool. I have now watched several of your videos in the past one hour and I want to say thanks for being detailed but not pedantic.
@@DIYAutoworksNG If you do please let's know how it compares to the full size system like the MP808TS in functionality and ease of use. Autel says it's functionaly similar to the MK808, but I'm essentially getting the AP200 to add a second key fob without dropping my vehicle off at my mechanic who will then drive it to some guy that does fob programming.
Just so you guys know I tried this on a Honda Insight 2021 EX and it worked!!!! so happy... But at the beggining showed me this is the 4th key registered 😳😳😳 I bought the car salvaged with 4000 miles.
Interesting, I did not expect the MP808TS to be able to do this function. Questions though: How do I add a new fob and program it to Driver 1. And reprogram the original fob to Driver 2.
Yes it does. It must first be a supported trim e.g. EXL. I think there's a menu for doing that on the tool, don't remember but could check. Only thing is my EX trim doesn't support the 2 driver setup.
@@DIYAutoworksNG So, if I want to program one key as driver 1 and other as driver 2. Those options should come from the car’s settings or in the programming tool? Thanks for your reply :)
After looking up how to reprogram key fob,I found your videos. I went ahead and bought me Autel MP808S-TS. I got to program a new key fob for my 2013 Honda Ridgeline so I have 2 now. I have a 2014 Honda Vezel that's located in Guyana,and I have been trying to program the aftermarket key fob I bought but no luck. I was told by a guy over there that it won't work to program that Vezel. Can you share a little if he's right or some tips what I need to do. This Vezel is gas,not electric.
May be I was missing reading comment. Where can I get that tablet mechine? Can I borrow at some where? I have honda Odyssey 2015. Can this method work for my car?
Hi. Thanks for your tuto, great content. I have a question please, is it possible to re-programme a locked original Honda smart key to another car. Thanks in advance.
@@DIYAutoworksNG Thanks for your feedback. Yes i mean the original key and not the aftermarket Key. The Honda dealer told me that the original locked key cannot be reused. I have one locked and i don't Know how to reuse it for my car.
@@DIYAutoworksNG i checked the part numbers are not the same (CY-KH54H0BJ & 72147-TGG-G01) but the frequency, modulation and transponder are the same. I need you advice, should i but another used key with the same part number ? And could the autel Key programmer do the job. Many thanks 🙂
Thanks bro for the video, please if i buy this tool ,do i need any other payments or subscription before i can use it to programs keys and remote...please
You get the first year subscription free. There are some deals for 2-year free subscriptions. After that it should continue to function normally, however some have reported reduced functions on some cars. If you do go ahead, be sure to create a backup. I have videos on what to expect when the subscription expires and how to backup and restore your Autel scanner
It should have Driver 1, Driver 2, surely. Is driver 1 stamped on the rear of the fobs? If so, from my understanding, you'll need to buy a driver 2 fob. They have different part numbers even though they are identical.
@DIYAutoworksNG thanks I know which one, I just bought a good scan tool online, I should have it by tomorrow, the make is otofix which come from autel, it has the immo keys section but there is nothing online to give details if a key programming tool would work on it is the otofix d1 max, love your videos you're literally the only RUclipsr that explains everything in full detail that makes it understandable
Thanks a lot for the compliments. Congrats on your new tool. Let me know if the D1 Max is able to program infrared keys. From the quick search I did online, it doesn't look like. But do confirm.
@DIYAutoworksNG they're really helpful I've been awake all night watching your videos, yeah ill let you know when it comes, really hard to get reviews on it, there isn't even 1 video of it on RUclips either, as you said I don't think it will do the infrared keys but I won't know until I get the key tool separately, on the description it says it can help performance on cars with the ecu coding, is that remapping?
Otofix actually approached me sometime back to do a review, but they wanted to have a say in the final content of the video, so I said no. They weren't too impressed by the 3000 subscribers I had then too. 😂 Remapping is more advanced than ECU coding. Remapping rewrites the ECU software, coding doesn't.
I have a rookie question - Pls forgive me ... I'm a hobbyist and new to the Autel Scanner. I tried to follow your script, but i cannot get past a screen with (4) options - ECU Information, Read Codes, Erase Codes and Live Data. The same (4) pop up everywhere regardless of what I select. How can i get past this?
Not sure if Autel has rolled out coverage for 2022 Honda. But Honda is one make well covered by this tool. If not available already it should definitely come to the device. Autel's coverage site just lists 2018 and above as supported. Doesn't disaggregate.
Could you show how to able remote start function into the new honda city without that function? I have a 3 buttons keyless and I bought a 4 button (remote start function) keyless. I want to able that function on the car >>> how to do that?
How much are the fobs worth? Someone smashed my 2018 hrv and wrote it off but I got the spare fob here that looks brand new.. Are they worth anything ?
Great video, I am thinking of buying the MP808TS that you have. Can you tell me if I buy a used remote car key online for my car, can I re-programme that key to work with my car as a spare key, or does the key that is being programmed need to be new key from the dealer? Many thanks.
@@DIYAutoworksNG yes, the service immo menu gives me one option called UCH i belive and the diagnostics menu gives me "second fitted alarm" in the current car. A Renault clio from 2020. And this has been the case for me since i bought it. I was looking to buy another unit until someone shared your vids and said it's possible. Please help if u can. My latest update is from 2022 so not so old
Then key programming on that particular model may not be supported. I recommend reaching out to Autel support to find out if key programming is supported. From what I can see on the coverage tool, it looks like it's not supported.
hello ... had a question on KM 100 for key programming for Honda Odyssey 2014. Do you know if KM 100 can program Honda manufactured keys (OEM keys) OR if it can program only Autel keys ( universal and iKEY) ? Thanks for the help
Rookie question, I have a civic 2017 however it is key entry. I am planning to change from key entry to start button , but my question is, can I still program a keyless remote even if I have a key entry?
Even key entry looks to be able to make it works.. you just need to buy a correct fob keyless into aliexpress and ask your honda dealer to program the key. Just open your original key and find the FCCID code writen inside it.. after this you can buy a new keyless into aliexpress.
I bought a 2019 Honda Accord Sport and they tell me that if I program a control with remote start the car starts because it already has the system, that's correct.? I gonna try later
@@DIYAutoworksNG It worked for me I programmed the new remote key using a scanner like yours without having to pay the dealer 2019 Honda Accord 1.5T is not supposed to come with remote start just wanna update to help someone.
Does anyone know if a key fob bought online can be programmed at Honda Dealership? I have a 2014 Honda Odyssey and found a key fob online for $$$ less then what the dealer sells it for
Remote start comes factory in supported trims. Once this key is programmed, it will be able to remote start the car as long as the option is not disabled and there's no fault in the car.
@@DIYAutoworksNG okay thank you, I find it strange that they made it capable for the 2013 Ex (what I own) and never made it a option. definably gonna look into doing this because it can get to -15 degrease in the mornings where I live. Would I just buy a 2018-2019 key fob? that's the only one I can see with the remote start actually on the fob. I assume this doesn't work on the lx trims or any with a physical ignition key.
Yea. Doesn't work with the LX trims. Not sure about using the remote from 2016. It would depend on the ID. I've also seen videos of people installing remote start on the 2013 - 2015 Accords. Not sure how it's done.
I'm not sure if the car supports remote start. Maybe it does, maybe not. I'm thinking if it did, it probably would have come with a fob with the remote start button. Check in the vehicle settings and see if you can find remote start anywhere.
@@DIYAutoworksNG is there a way to find out what generation immobilizer is in our car? I've been searching but can't find any references to different generations
You hit the nail on the head! Info is sketchy on the Internet. Had a look previously and don't recall finding anything of value. Right now, I only know when I connect to the immobilizer ECU. 😔
Thank you for your video. Let me understand, you are copying the existing FOB. I purchased a USED vehicle with one FOB - the seller claims he lost the other FOB. My questio: Can 2 NEW FOB be reprogrammed, so the missing FOB can't be used to operate (steal) my vehicle.
Only had one experience with an aftermarket key fob. This was on a 7th generation Honda. The fob took longer to open/close the car when the buttons were pressed. Didn't like that. Since then, I only do OEM key fobs. Will rather get a used OEM than a new aftermarket. They are probably some good ones, I just don't know.
Why not show people like ATG & me how to buy a key fob & program the key fob without buying the overprice Autel MP808TS? Bet you get can it without the the OBDII.
This car and many others with smart keys can only be programmed with the appropriate scan tools. The cheapest tool I know that can do this is the XTOOL D7. They may be cheaper ones, but that's the one I've used and can confirm. I also have a video on it. I also have some discount coupons for added discounts.
I agree with you. If all one wants to do is just program the key and not much else, taking it to the dealership will be more cost effective. The tool begins to make sense if you are a heavier user.
Video cuts out to show the part where the machine has to read the PINCODE and this scanner cannot do that so do not buy this scanner if u want it to program keys ... you will have to buy the pin codes from dealers ... 😆 atleast explain that part in the video
Some cars need pin codes. Not Honda. I have never programmed a Honda that needed you to read pin code data. Even Toyota don't require it either. However, Dodge, Nissan, Benz and some others do.
Thanks a lot for the feedback. I rewatched the video after your comment, and identified some fat which could have been trimmed. Thanks again. I'd like to believe I'm gaining efficiency in editing with every new video 🙂
Your videos are short,detailed,clear..etc thank you so much you really don’t know how your videos are impacting us(African mechanics)THANK YOU!🙏🏻
You're welcome! Glad you've found the videos helpful! 🙏🏼
I turned the web upside down while searching for 2016-present Honda fob programming before I purchase a Autel AP200 Scanner, I wanted to be sure that the AP200 can program Honda keyless fobs. When I found your video I was not disappointed despite the fact that you used a different but similar tool. I have now watched several of your videos in the past one hour and I want to say thanks for being detailed but not pedantic.
Many thanks! Have you tried the AP200 with the 2016+ Honda? I have the AP200 but haven't tried it on the 2016+
@@DIYAutoworksNG Just ordered it, waiting for it to be delivered to try it with a 2019 Honda SUV.
I see. May get round to trying to use mine to program.
@@DIYAutoworksNG If you do please let's know how it compares to the full size system like the MP808TS in functionality and ease of use. Autel says it's functionaly similar to the MK808, but I'm essentially getting the AP200 to add a second key fob without dropping my vehicle off at my mechanic who will then drive it to some guy that does fob programming.
I'll try to do this. I expect it to work, but let's see.
That was great! Congrats on the new ride.
I hope to own a 2013 soon. It’s my dream ride for now.
Thanks! All the best!
Just so you guys know I tried this on a Honda Insight 2021 EX and it worked!!!! so happy...
But at the beggining showed me this is the 4th key registered 😳😳😳
I bought the car salvaged with 4000 miles.
Great to hear! Mine had 3 keys registered with only one supplied. 😂 I cleared all the other keys.
@@DIYAutoworksNG oh what menu was for clearing them?
Thank you! Do you know how to reprogram your original key fob? Please share a video if you do.
Great video thanks a lot I have the matco Maximus 2.0 and is basically the same set up as the maxi pro
perfect, well explained and understood.
Thanks!
Interesting, I did not expect the MP808TS to be able to do this function.
Questions though: How do I add a new fob and program it to Driver 1. And reprogram the original fob to Driver 2.
Yes it does. It must first be a supported trim e.g. EXL. I think there's a menu for doing that on the tool, don't remember but could check. Only thing is my EX trim doesn't support the 2 driver setup.
I love your honesty.
Thank you!
I was just wondering if we can use them separately as driver 1 and driver 2 key?
It can be programmed as Driver 1 and Driver 2, if your Honda supports it.
@@DIYAutoworksNG So, if I want to program one key as driver 1 and other as driver 2. Those options should come from the car’s settings or in the programming tool? Thanks for your reply :)
After looking up how to reprogram key fob,I found your videos. I went ahead and bought me Autel MP808S-TS. I got to program a new key fob for my 2013 Honda Ridgeline so I have 2 now. I have a 2014 Honda Vezel that's located in Guyana,and I have been trying to program the aftermarket key fob I bought but no luck. I was told by a guy over there that it won't work to program that Vezel. Can you share a little if he's right or some tips what I need to do. This Vezel is gas,not electric.
Thanks for sharing such videos.
Appreciate.
Glad you find it useful. All the best!
Can you reprogram a used Honda key fob for a push start?
Yes.
May be I was missing reading comment. Where can I get that tablet mechine? Can I borrow at some where? I have honda Odyssey 2015. Can this method work for my car?
I don't know of any service that lends scanners, but could be wrong.
@@DIYAutoworksNG thank you
Hi.
Thanks for your tuto, great content.
I have a question please, is it possible to re-programme a locked original Honda smart key to another car.
Thanks in advance.
If you mean program an existing key to a Honda to another car, yes. As long as their FCC ID are the same.
@@DIYAutoworksNG
Thanks for your feedback.
Yes i mean the original key and not the aftermarket Key.
The Honda dealer told me that the original locked key cannot be reused.
I have one locked and i don't Know how to reuse it for my car.
@@DIYAutoworksNG i checked the part numbers are not the same (CY-KH54H0BJ & 72147-TGG-G01) but the frequency, modulation and transponder are the same.
I need you advice, should i but another used key with the same part number ?
And could the autel Key programmer do the job.
Many thanks 🙂
Not true. I've personally done this.
I advise you get a key with the same part number. What Honda is this?
Thanks for helping us
👍🏼
thanks for showing.
You're welcome
So do you need to have that scanner? Will other scanners work?
Yes. A lot of other scanners will work.
May i use canada instead of USA for system selection
Just use the country your car was made for.
Thanks
Am in canada , it may be made for canada .what do u think
Most likely. Check your VIN stamp. If it reads Canada its for the Canadian market.
Hi, nice video, do you know if the Autel model MK808BT can program this type okt keys???
Thanks! Yes it can.
Do I have to have at least one working key fob to program?
Depends on the car. On Honda, as seen in this video,no.
I have to replace the keyless module on 2013 accord .... how to programming it?
You have a scanner? Which one?
Do you know if used keys with matching part and FCC numbers can be programmed like this?
Yes, they can.
Does it working on honda city 5th gen 2022/23 models?
Haven't personally checked, but you can review the tools coverage here
autel.com/vehicle-coverage/coverage2
Can I program a new key fob for my 2017 Honda Pilot without that tool just by doing the steps you did?
Nope
Thanks bro for the video, please if i buy this tool ,do i need any other payments or subscription before i can use it to programs keys and remote...please
You get the first year subscription free. There are some deals for 2-year free subscriptions. After that it should continue to function normally, however some have reported reduced functions on some cars. If you do go ahead, be sure to create a backup. I have videos on what to expect when the subscription expires and how to backup and restore your Autel scanner
Can you add keys for 2013 Cadillac ATS with this scanner ? Thinking of buying this Thank you
Hey, using Autel's vehicle coverage tool, I found no support for adding keys on the 2013 ATS.
Nice one, as always.
Thanks, mate!
I have two keys and both of them are recognized as Driver 1. Is there a way to change one key to be Driver 2?
It depends on your trim. EX and LX don't support 2 driver positions.
This is a 2016 pilot.
What trim?
Touring
It should have Driver 1, Driver 2, surely. Is driver 1 stamped on the rear of the fobs? If so, from my understanding, you'll need to buy a driver 2 fob. They have different part numbers even though they are identical.
Would this work for the older infrared mercedes keys?
This tool won't do those IR keys. I have a different video on those using the XTOOL IK618.
@DIYAutoworksNG thanks I know which one, I just bought a good scan tool online, I should have it by tomorrow, the make is otofix which come from autel, it has the immo keys section but there is nothing online to give details if a key programming tool would work on it is the otofix d1 max, love your videos you're literally the only RUclipsr that explains everything in full detail that makes it understandable
Thanks a lot for the compliments. Congrats on your new tool. Let me know if the D1 Max is able to program infrared keys. From the quick search I did online, it doesn't look like. But do confirm.
@DIYAutoworksNG they're really helpful I've been awake all night watching your videos, yeah ill let you know when it comes, really hard to get reviews on it, there isn't even 1 video of it on RUclips either, as you said I don't think it will do the infrared keys but I won't know until I get the key tool separately, on the description it says it can help performance on cars with the ecu coding, is that remapping?
Otofix actually approached me sometime back to do a review, but they wanted to have a say in the final content of the video, so I said no. They weren't too impressed by the 3000 subscribers I had then too. 😂
Remapping is more advanced than ECU coding. Remapping rewrites the ECU software, coding doesn't.
does this need subscription per brand per year? or just once per year and get access to all car brands and functions?
Subscription is to all supported car models.
I have a rookie question - Pls forgive me ... I'm a hobbyist and new to the Autel Scanner. I tried to follow your script, but i cannot get past a screen with (4) options - ECU Information, Read Codes, Erase Codes and Live Data. The same (4) pop up everywhere regardless of what I select. How can i get past this?
What Autel tool do you have?
What if you lost your key an don’t have original key
Buy a new one and do an all keys lost procedure.
Does this device it work for a 2022 Honda Accord ?
I would think so, but do reach out to Autel to confirm. Autel lists coverage for 2018 Accord and above.
Hi is this can program key 2022 vehicles? Tnx
Yes, but depends on the vehicle.
Like honda civic 2022
Not sure if Autel has rolled out coverage for 2022 Honda. But Honda is one make well covered by this tool. If not available already it should definitely come to the device. Autel's coverage site just lists 2018 and above as supported. Doesn't disaggregate.
Could you show how to able remote start function into the new honda city without that function? I have a 3 buttons keyless and I bought a 4 button (remote start function) keyless. I want to able that function on the car >>> how to do that?
Unfortunately, I'm yet to explore this in an unequipped Honda!
Hi.
Please how to delete a lost smart key ?
Many thanks.
Hello. I am yet to try deleting single keys from the immobilizer. If I do, I'll make a video.
Great video thanks a lot
Glad you liked it!
where did you brought the key silicone case from?
Just from a street vendor. They are loads online on Amazon.
i wonder if this works on 2021 hondas the key looks similar
I expect it should. Autel coverage tool states support for 2018 to date. autel.com/vehicle-coverage/coverage2
Hello can you program 2017 accord fob for a 2015 crv?
No. Those fobs are quite model and even sometimes, year specific!
How much are the fobs worth? Someone smashed my 2018 hrv and wrote it off but I got the spare fob here that looks brand new.. Are they worth anything ?
They are definitely worth something. I don't know for the HRV, but used Accord 9th Gen fobs go for usd45 - 60 on Ebay.
Can 2012 Acura TL key fob be program with procedure /scanner?
Yes
Great video, I am thinking of buying the MP808TS that you have. Can you tell me if I buy a used remote car key online for my car, can I re-programme that key to work with my car as a spare key, or does the key that is being programmed need to be new key from the dealer? Many thanks.
Thanks! What car is it?
@@DIYAutoworksNG for Mercedes, Range Rover or Honda ideally
I do a lot of diagnostic videos on my channel and get asked if I can program keys etc
Used Honda keys will work. Mercedes, No. I don't know about Range Rover.
@@DIYAutoworksNG really appreciate the quick response, your channel is doing very well, I'm far behind you with only 4.5k subs but growing
Thank you 😊 sir
You're welcome!
awesome video thanks
I have this exact same device but when i go to immo it never gives the option to do keys? Tried different cars, any idea why?
Including Honda?
Have you tried going through other menu? Eg via the immo ECU and not via the immo service function menu.
@@DIYAutoworksNG yes, the service immo menu gives me one option called UCH i belive and the diagnostics menu gives me "second fitted alarm" in the current car. A Renault clio from 2020. And this has been the case for me since i bought it. I was looking to buy another unit until someone shared your vids and said it's possible. Please help if u can. My latest update is from 2022 so not so old
I have never come across anything that i saw in your vids, like add key, erase key, all keys lost, never 😭
Then key programming on that particular model may not be supported. I recommend reaching out to Autel support to find out if key programming is supported. From what I can see on the coverage tool, it looks like it's not supported.
Might be a dumb question is there anyway to program it with out a tablet 🤔
Not dumb at all. For the systems with smart entry, a tool is always needed.
Where can you get the key fob to program ?
Amazon, Ebay, dealer website are options.
Has anyone accomplished this with a Foxwell 510 Elite? Great vid, btw!
Many thanks!
Had a Foxwell NT600 back in the days. My only experience with the brand.
hello ... had a question on KM 100 for key programming for Honda Odyssey 2014. Do you know if KM 100 can program Honda manufactured keys (OEM keys) OR if it can program only Autel keys ( universal and iKEY) ? Thanks for the help
Honda's a low level immo systems, so I believe it should do the OEM keys.
Rookie question,
I have a civic 2017 however it is key entry. I am planning to change from key entry to start button , but my question is, can I still program a keyless remote even if I have a key entry?
Since I haven't personally done this conversion before, I can't say. However, I know people install aftermarket push to start in cars.
Even key entry looks to be able to make it works.. you just need to buy a correct fob keyless into aliexpress and ask your honda dealer to program the key. Just open your original key and find the FCCID code writen inside it.. after this you can buy a new keyless into aliexpress.
I bought a 2019 Honda Accord Sport and they tell me that if I program a control with remote start the car starts because it already has the system, that's correct.? I gonna try later
Not sure. But I seen some mention of that somewhere. I haven't tested or have confirmation of someone who has.
@@DIYAutoworksNG It worked for me I programmed the new remote key using a scanner like yours without having to pay the dealer 2019 Honda Accord 1.5T is not supposed to come with remote start just wanna update to help someone.
Very good 👍
Thanks!!
Please where did you buy the key?
I think it was on Ebay.
Does anyone know if a key fob bought online can be programmed at Honda Dealership?
I have a 2014 Honda Odyssey and found a key fob online for $$$ less then what the dealer sells it for
I have no idea, but my guess will be no. Do you want to try a locksmith instead?
does this add remote start to the car?
Remote start comes factory in supported trims. Once this key is programmed, it will be able to remote start the car as long as the option is not disabled and there's no fault in the car.
@@DIYAutoworksNG okay thank you, I find it strange that they made it capable for the 2013 Ex (what I own) and never made it a option. definably gonna look into doing this because it can get to -15 degrease in the mornings where I live. Would I just buy a 2018-2019 key fob? that's the only one I can see with the remote start actually on the fob. I assume this doesn't work on the lx trims or any with a physical ignition key.
Yea. Doesn't work with the LX trims. Not sure about using the remote from 2016. It would depend on the ID. I've also seen videos of people installing remote start on the 2013 - 2015 Accords. Not sure how it's done.
How to upgrade smart keyless to smart key auto start engine?? Car honda city hatchback 2022...
I'm not very clear on what you mean. It seems like the car has keyless entry already??
@@DIYAutoworksNG yes i already has keyless entry....
Does your manual say the car has remote start?
The remote key only has the lock and close the lock
The remote key is the same model as jazz and brv
Can I upgrade to a remote auto start key?
I'm not sure if the car supports remote start. Maybe it does, maybe not. I'm thinking if it did, it probably would have come with a fob with the remote start button. Check in the vehicle settings and see if you can find remote start anywhere.
Spend money take money 💰
I can only enable or disable keys on my bmw, I can't program or add new key.
I see. Is it 5th generation immobilizer?
BMW's tend to be among the most demand cars to program keys for
@@DIYAutoworksNG I don't know, its a 2009 bmw 335i.
@@DIYAutoworksNG is there a way to find out what generation immobilizer is in our car? I've been searching but can't find any references to different generations
You hit the nail on the head! Info is sketchy on the Internet. Had a look previously and don't recall finding anything of value. Right now, I only know when I connect to the immobilizer ECU. 😔
Thank you for your video. Let me understand, you are copying the existing FOB. I purchased a USED vehicle with one FOB - the seller claims he lost the other FOB. My questio: Can 2 NEW FOB be reprogrammed, so the missing FOB can't be used to operate (steal) my vehicle.
Yes. You just need to do an all keys lost.
Amazing thanks
Thanks. 🙏🏼🙏🏼🙏🏼
Only honda?
Also supports other cars but not all. You can check their coverage list for vehicles supported.
What's your advice on buying a non OEM key fob? I saw some on Amazon looking like the one you have here but no Honda logo on the back.
Only had one experience with an aftermarket key fob. This was on a 7th generation Honda. The fob took longer to open/close the car when the buttons were pressed. Didn't like that. Since then, I only do OEM key fobs. Will rather get a used OEM than a new aftermarket. They are probably some good ones, I just don't know.
@Piyke DIYAutoworksNG
Great advice as usual. Thank you. 🙂
You're welcome!
Good
Anyone in north NJ can do this for me? Fukin dealer DCH honda paramus wants 300+ for key and program.
That's the thing. 300+ would get you a scan tool that can program the 9th Gen Accord.
I tried contacting you through your IG but no response
Hi. I've responded to all pending messages on IG. You may as well state the query here so that everyone of us can learn.
Howmuch
Changes quite a bit, but links in the description.
Why not show people like ATG & me how to buy a key fob & program the key fob without buying the overprice Autel MP808TS?
Bet you get can it without the the OBDII.
This car and many others with smart keys can only be programmed with the appropriate scan tools. The cheapest tool I know that can do this is the XTOOL D7. They may be cheaper ones, but that's the one I've used and can confirm. I also have a video on it. I also have some discount coupons for added discounts.
Dang that tool cost $1000 not including the key fob. Maybe cheaper if u just bring it to the dealership. Not like u need 100 spare key fob.
I agree with you. If all one wants to do is just program the key and not much else, taking it to the dealership will be more cost effective. The tool begins to make sense if you are a heavier user.
Just a thought, could just order to “Test”, if that doesn’t work then “Return”. I didn’t tell you that though. LOL
Why so many majic tricks before you start? 2:00
Laying the foundation I guess 😀. Seriously, just to demonstrate I that one of the keys really wasn't working.
Hi
🤙🏼
Video cuts out to show the part where the machine has to read the PINCODE and this scanner cannot do that so do not buy this scanner if u want it to program keys ... you will have to buy the pin codes from dealers ... 😆 atleast explain that part in the video
Some cars need pin codes. Not Honda.
I have never programmed a Honda that needed you to read pin code data. Even Toyota don't require it either. However, Dodge, Nissan, Benz and some others do.
Почему название видео русское, а само видео на английском?!
I added Russian captions
Video way Too long.
Thanks a lot for the feedback. I rewatched the video after your comment, and identified some fat which could have been trimmed. Thanks again.
I'd like to believe I'm gaining efficiency in editing with every new video 🙂
Great video thanks a lot I have the matco Maximus 2.0 and is basically the same set up as the maxi pro
Thanks, mate. I know matco tools, but never used any.