How to Install an Angle Kit (Shopping Cart Angle)
HTML-код
- Опубликовано: 19 янв 2018
- Learn how to get extreme steering angle for your drift car! Not only will you learn how to install an angle kit, but you will learn how to replace the entire front suspension including the lower control arm, wheel bearing, tie rods, coilovers, sway bar, steering knuckle, and brakes.
Tools and Products
Bump Steer Kit: amzn.to/2DvleBE
Angle Kit: goo.gl/5ZiZQK
Extendable Ratchet: amzn.to/2DzNH9x
Wrench Set: amzn.to/2Dty2cA
Torque Wrench (goes to 250ft-lbs):amzn.to/2DV6WrY
Thread locker: amzn.to/2BfMCi2
Antiseize: amzn.to/2roe8Kz
Electric Cutoff Wheel: amzn.to/2DlXvk8
Wheel Bearing: amzn.to/2DztiRM
Stiffer Springs: amzn.to/2Dm936Q
Thanks Chris Forsberg for footage of his car: / chrisforsbergracing
→ Become a ChrisFix Subscriber: ruclips.net/user/subscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. 
Авто/Мото
Here is an UPDATE: ruclips.net/user/PaintballOO7community
New video coming out soon!!!
Hee Cris your are awsome
Heen today are this week
ChrisFix sweet Chris.i was also wondering what is your favorite car company.ford.chevy. Stuff like that
Cant wait to see that bmw u bought xD
ChrisFix Got a question. I'm young. In my teens. I'm on my own here. I know basic things. But I'm fearing my battery in my vehicle is cracked. Anyway to tell? I haven't even looked at it yet. Just asking advice first
*Chris's wedding*
"Place the ring on her finger."
"I'll be using medium strength thread locker..."
At 12:38 he installs a washer then nut without applying thread locker. I'm not sure how to feel.
@@Agret i'm pretty sure he said he will let the alignment shop adjust those spacers on that.
Hahahahahahaahahaha
😂😂👊
Hayden White atleast she couldn’t leave him
*in a dark alley
Me: you got the stuff?
ChrisFix: *opens trench coat reavealing medium strength thread locker
Me: I'll take it all.
>:)
dude ur lucky you found that deal
The sound of a torque wrench clicking is one of the most satisfying things on the planet.
Feels good in the hand too.
What's with the face
How do you do this so confidently?
I would be like, "Uhh, is there supposed to be something there?" "Did I install that correctly?" "Was there supposed to be a bushing there?" "WHERES THAT BOLT"
Organization and planning out the project go a long way! That way you'll know if you did it all correctly!
Well , Chris does has some experience.
That helps him out
Take pictures if you're not confident. Eventually you'll learn your car
@@chrisfix who taught you how to work on cars or what kind of experience did you have?
Yea same
Other people : Addicted to drugs and alcohol
Chris : addicted to medium strength tread locker
And brake clean
Ok
I’m addicted to technology
@@graceperez9672 im addicted to cars. And turbos and drifting
Yay I was the 666th like
I am addicted to your videos. I don't know anything about cars.
That’s awesome! Hopefully you are learning!!!
Wow... love it man def learned alot from this guy
BloodMaster desi blode
BloodMaster same
BloodMaster lol same
Hey Chris. The bolt was designed in a place where if the nuts come off, there is something to hold the bolt from coming off completely. It is designed for safety. You don't want your LCA to come off completely in any speed.
idk man with that logic wouldn't every single bolt in the wheel area be blocked off too then? lol.
@@smhvito not really
@@smhvito agreed, i'd hope they'd use a cotter pin, red loctite or something designed to stop bolts from coming off, not block it with another part of the frame
"It's something that shouldn't have happened, but it did." Damn, I felt that!
So annoying haha
ChrisFix it’s just about any mod or fix I’ve never done before or a new vehicle to do it on!
“Chris, what do you want on your sandwich?”
Chris: “Some medium strength thread locker please.”
Chris: dies
LOL HAHAHHAHAHAHAHHAHAHAHAHAHAHAHHAHAHAHAHAHHAHAHAHAHAHAHHAHAHAHAHAHAHAHANHAH LOLOOLOLOLLOLLOLLOLOLOLOLOLOLOL
Bruh🤣🤣
Medium strength bread locker
@@coleman4840 IM FRICKING DEAD 🤣🤣🤣🤣🤣
“Papa i'm in the highway and i ran out of gas!"
“Just add some medium strength thread locker"
@@nachoman69 r/woooosh
@@nachoman69 do you not get jokes?
Ah i feel bad
And some soapy wuder!
@Vj Canda, yer hot.
You know, Guys and Girls love watching these videos because it motivates us to work on our cars and quit the slackin. We appreciate ya!
I recently own a car....and now I'm stuck in your channel...The fact that you narrates and explain it all as detailed as possible and concern about the safety measures and still manage to add some hacks makes me love this channel even more.... 😀👍
what went down when he asked if he could drift at the lot
Employees : “sorry man closed for the winter”
Chris : “HEY GUYS.. CHRISFIX HERE!”
Employees : “take whatever you want.. just please dont hurt us we have families!”
xD
Lol, you know it happened justtttt like that hahaha. But for real, the passenger who works at the track, Chris, was all about seeing how the angle kit worked and neither of us wanted to wait till April lol.
+ChrisFix I hate your videos because you're not talking you're just editing in your talking
sanford gravel that’s why?
@@randomminibikestuff1357 does that fucking matter?
The quality of this tutorial is through the roof, man.
So much info, amazing editing, the graphics, this really raises the bar for modding tutorial standards.
Thanks for all of the time and effort, Chris!
Thanks a lot Vincent! I try my best to make videos that are enjoyable, packed with info and won’t be a waste of time!
So much information
absolutely right , this was a proper step by step . no missing info.
Vincent Ippolito quality enough to get me to subscribe :)
ChrisFix Hey chris i watched all your driftstang video’s but how did you find your drift course because how do you know you have a proper drift club
I got an 04 GT and I’m doing all of the mods that you’ve done, plus some cosmetic stuff like a carbon fiber hood! These videos are helping me like crazy, proving everyone wrong… mustangs can drift!
It's great to see you having a blast with the DriftStang. I remember the video when you got it actually working!
It's been awesome! And I'm glad you remembered that video!
I literally don't even have a car, but everytime you post a video I'm like I have to watch it. 😂
Im glad you are learning a lot and the videos are enjoyable!
ChrisFix I’m 12 and I watch these because I love your content and I like cars a lot
Branston Morgan same here
Branston Morgan cars are fascinating to me
Branston Morgan lel same😂😂😂😂
I think ChrisFix secretly wants a romantic relationship with medium strength thread-locker
Future RN Corey okay well i wonder what kind of person he would actually date now that you mentioned this
Bro hahahaha
Hahahahaha what even
Future RN Corey that's a fujing fact!!!
"Now it's important when you eat corn flakes to make sure you use some medium strength thread locker so that vibration doesn't loosen your breakfast"
Chris Fix (probably)
your videos inspired me to go and start doing all my car maintenance myself but geez you make it look so easy. I changed my brakes and rotors for the first time but it took me like 5 hours to finish it and a few broken bolts. But hey I did finish it and they work great and I spent less doing all of it than it would have if I brought it to a mechanic
50% of the comments: M E D I U M T H R E A D L O C K E R. The other 50% of the comments: HIS FACE WAS REVEALED, OMG!!! 😂
So true
Really?
Time stamp?
@@psychic9642 13:19 but he has blurred it out since. The reflection in the fender
ChrisFix is a gift from the gods
Thanks!
I agree too.
Agreed
Agreed
100%
woah , most youtubers finish reading comments 2 hours after the vid is up but you keep going . You are really one of the best youtubers on the site bcs you are honest and quality > quantity isnt a thing anymore but you still do it , keep up the great work man
I spend 4hrs a day answering comments because you guys are important to me and I want to help answer questions.
Chris you made me learn so many things off your channel keep doing what you do best
I love your vids buddy keep up the good work I'm definitely gonna watch your videos when I get a car and modify it even though my father is a very experienced mechanic nobody really notice how good he is with cars and vehicle problems he can easily solve mechanical problems
Who needs an owners manual when we have Chrisfix?
True
Indeed
an owner's manual should be a little piece of paper with a link to the chrisfix RUclips channel
Person Man s
Person Man s
I can’t believe that you’ve turned this mustang that didn’t run into an amazing drift car, well done man !👍🏼😄
Thanks a lot!
ChrisFix did you forget about the dust shield on the new knuckle?
ChrisFix hi please will you make an Ems or fire car of you can't its ok.
HULKSTA COOL I
HULKSTA COOL ?
chrisfix i just told my mum how happy you were when you installed the angle kit and i knew how happy you were a hope you have a good time drifting next time
boi i would salute to this man, never seen content creators would chec recent comments on a vid thats posted like 5yrs ago 👏
When they ask for certification i will hand your youtube link for my next job as mechanic
hahah YES!!!!
lmao
LOL
Chris did your beard grow???
Supra has
You put so much work into that car. I hope you get many years of fun out of it. :-) Slide a 1" galvanized pipe 2 feet long over the handle so it's much easier.
Me too! She is definitely tough to drift compared to other cars.
Again amazing video man! Hands down absolute best diy teacher ever!
dude im just thrilled about how simple you are making this
you should make a video about suspension geometry
I should!
You must. Mwuhuhuh. We're holding you to it Chris.
ChrisFix Please do. SavageGeese and his mechanic make comments about 'aluminium tie rod' this and 'double wishbone' that and it's like explaining quantam mechanics to a four year old.
Matheus Marçal ÿ
Passenger:"Im so happy for you, you have no idea"
Chris:"Im so happy you have no idea
Me: im so happy that both of you are happy 😂
Love your videos💯💯 I’m starting my project car soon and I been looking at your videos for a while now💯
Chris you are a real angel grinder when it comes to drifting!
A+ production value
Thank you!
your vids are pretty fucking good, seriously, never stop making that, you are the best automotive youtube channel in the world. my english is pretty bad because im brazilian and all english that i know is because i learn watching american youtube videos, but that does not stop me from congratulating you on your amazing job
Thanks a lot! Your English is great!
Guilherme Schlesener your english is pretty good actually
Guilherme Schlesener your English is excellent
Very humble tbh I’ve been a fan of your videos for 4 years
Bro out of all of my subscriptions, you are by far my favorite youtuber.
Thanks a lot for "INSANE" video 😃 I loved it Chris!!
Thanks Zakir!
When he said your not going to believe this after he got the first bolt out I laughed my ass off
My first car was a 2001 Nissan altima. Using your tutorials I made it into an amazing drifting car
I really enjoyed this video :) Very informative, didn't know there was a car where removing the lower control arm needs you to move other parts to get the bolts out. Am I the only one who thinks an angle kit would be useful for making a car easier to do U-turns in, nevermind for drifting?
i love how clean your work is, and you make it look easy
Please for a video on bump steer, would love to see it
I will have to!
ChrisFix I would Google it too see what it does but I'll wait for a video lol
ChrisFix def would watch
Muamin Hugsy ha
I did the cardboard angle kit finder like you had and found out my 04 gto has 32* factory of angle, shortened up my knuckles (im a certified welder) and now its at 47* of angle! thanks man!
I love that car and all the upgrades you have done to it
Oh man, I'm really glad that all the hard work put on the first videos has finally paid off, now you can spend some time in doing stuff that you really enjoy. Thanks for all the passion and patience put every video Chris. Keep enjoying the ride!!👍
Thanks a lot!
As an owner of a 98 Mustang GT, I appreciate your videos of the Drift 'Stang. Although mine is a daily driver, you have given awesome details on things I needed to do to her. With your help, I have replaced control arm bushings, ball joints, inner and outer tie rod ends, anti-sway bar bushings and end links, front wheel bearings, upgraded brakes all around, wheel spacers and you even helped me diagnose a fuel delivery problem. The fuel issue turned out to be worn wires at the rear wiring harness that was rubbing the insulation off of the wires where it over hung the lip of the fuel tank. One problem that has taken about 9 months to figure out was a clunking noise whenever the front suspension loads and unloads. After many online Mustang forum searches, it turned out to be loose bolts at the k-member stabilizer bar at the rear of the k-member. It runs under the oil pan. I didn't even know it existed! Thank you for all you do!
Your vids on how to do this stuff is Awsome cause I’m gonna be a mechanic and with theses videos I have a little bit more knowledge than I usually do now so thx
You are very clever when explaining 💜
New video = awesome way to end the night. Thanks Chris!
Thanks man! Glad the video was helpful!
And where I am it's just 10am, great video to start the day))
Best DIY automobile channel. Chrisfix is the best. I love you videos. I am a fan of chrisfix. You are so much good at explanation.
you make installing car stuff so much more fun and also I dont own a car im not old enough but you make it so much easier when im helping my dad with his car
I appreciate your videos cuz I see u put a lot of effort in doing the videos.
You drifted in the parking lot of Englishtown Raceway?! That's awesome. I've drag raced there a few times in the past at the NHRA races. Cool stuff Chris
Awesome! You should come to an event, say hello, and watch!
CadillacWill F
13:29 Chris fix face reveal 🤷🏻♂️🤷🏻♂️🤷🏻♂️
Alien Mars attack u know he doesnt have a beard,his real face is without a beard
@@kiddwid6499, did you know you can grow beards?
Alien Mars attack same I saw it
Yo I was too busy looking at the brakes to notice that
it's happened multiple times in other videos nothing new
i have been watching chrisfix's videos from a long time ago and cant stop watching his drift vids
you are so good at drifting
love your vids hope you are doing good
The ChrisFix starter kit
1 Tourqe wrench
2 Medium strength threatlocker
3 100 gallons of blinker fluid
Edit: People really want that 4 Soapy Wooder
PharaØ GaMiNG can’t forget anti-seize
cant forget the soapy watah
PharaØ GaMiNG and don't forget your soapy water
emilio soapy wooder*
XDDDD
Your videos make me smile.
Awesome!
i just played wangan midnight videos and these chrisfix started popping up again on my feed just like how he used to back in 8th grade with him starting out ♡
I just find this interesting but don't intend on doing it myself so I'm glad you included a description of why someone would do this! xD
Great vid thanks! :D
I really love how this car was not even running and now its like a perfect drifting car
Crazy right?!
Incredible edits
Thanks.
Clean and professional work. Good job
"Torque It To 250 Ft Lbs, Thats Alot of Torque." Me - A Diesel Mechanic That Works On Big Rigs : 😐
Ok big man
Ok big man
Ok small man
Ok big diesel boi
Ok big man
I don’t understand how this guy know so much about everything, God Bless this guy, I believe in life you get what you give specially if you follow your purpose and passion! And I believe this guy is the result of that
WS 88 small minds are easily impressed
It's just time, research, and work! Plus paying attention. A lot of mechanic work is logic and feel. Good luck!
He googles it,then if he fucks up,he can cut out.
Let's not discredit Chris, he definitely does his due diligence and makes sure he does everything properly, but yes.. Anyone can google the job and find the torque specs online and do it themselves. The whole point of ChrisFix's channel is so everyone knows how easy all of this is. He's stated many times he's not a mechanic. It definitely gave me the confidence boost I needed to start working on my t5m.
WS 88 Any mechanic ? So many incompetent mechanics out there that your opinion is more than false.
Havent even watched the video, already pressed like👍🏼
Thanks for the support!!!
Same
Bro you are the most helpful person on RUclips
This thing's awesom bud .love your vids . Love from India..
More Like How To Rebuild Your Front Suspension (with angle)
Haha basically
chris Fix is the best
Vytautas 931 Chris fix is my dad
ChrisFix + Mighty Car Mods + Engineering Explained = All the car knowledge you could ever need!
Also, digging the beard Chris ;) You and the DriftStang are both looking sharper every video!
GUMBA rev up your engine !
GUMBA ahh, not really, the old fartimus is no good.
Scotty not really, anymore.
He's now just selling his opinions as facts and is starting to talk more and more bullshit.
If I had the strength right now I’d be out in garage working on my 96 ls swap camaro but my back is wasted o,o love your videos Chris really get the blood pumping and I’ve used your videos from time to time to remind myself how to do certain things, please never get rid of the drift stang, I want to see it boosted or engine swapped
Love your vids man keep up the great work
I thought you post weekly. Come back, please! 😃
I gave a few updates about the weather and filming on instagram and here: ruclips.net/user/PaintballOO7community
actually we can use this angle kit daily drive i love that
NİKOLA TESLA : I miss my Rwd volvos... They had an incredible (to me) turning radius for such an average car, it always foot comments from passengers. Pretty sure if I did this to my fwd car the axle would fall apart, haha. Or I'd have to be careful to never load it up while turning hard.
volvo09 My V50 also has a really tight turning radius, it's awesome! I just found some website to compare turning the radius, and actually my FWD has 0,2 meters tighter of a radius than a 850. Interesting to know! :) A relative to mine owned a Renault Kangoo, and wow the turning radius sucked on that little car compared to what I am used to!
+RUTHLESSNOODLE for you yes waste of time and money FOR ME NEVER WASTE OF MONEY İ LOVE TO BECOME İNTERESTİNG PERSON BUDDY BE DİFFERENT
Ruthlessnoodle - it could be argued that doing almost anything to a car is a total waste of money... Modifications (not repairs) rarely increase value. Based on that you modify a car to suit your own taste and needs, not someone else's.
DracoRemixer An 850 is also FWD, longer and actually steers like a van, so turning 0.2m shorter isn't really impressive. Compare it to a 740 or 940, even longer but RWD.
I've owned a Renault Clio, that thing was ridiculous, such a tiny car and I did 5-point turns where my Volvo 940 could almost make it around in one go.
5.5 - 3.5 equals 2.5. great math skills. Love your videos chrisfix
I changed the math with my voice but forgot to change the math on the text :o
I love how you explain everything
Awesome explanation!
Thanks!
Buy a BMW
Chris is a freaking car whisperer I've never seen a mechanic having this much knowledge about cars it mind bugling. You should start a DVD series when you can teach us newbies all your skills I'd buy them right away.
And how much he enjoys working on the cars not like other people who just do it for the money
james mouk he is like a teacher
Leo Kliesen Agree, but unlike most school teachers, he teaches something useful.
I love your driftin Chris fix
Best Mechanic Ever👍❤
Wife : stop wasting money on cars or i'll leave u
Chris : out with the old in with the new (wife)
Lol thats me
Hmm what if his wife is a rally cross racer
BRUHHHHH 😭😭😭😭😭😭
😂. Underrated haha
LOL
I really admire your extra effort to explain things in detail with visual demonstrations. It really shows the dedication you put into every single video. Keep it up Chris.
i love how you just dont go crazy like those other ricy cars but your car body just clean
You videos are super interesting and fun you show how to fix/add on to a car wile have ing a fun aesthetic
That was amazing I have an 04’ mustang and I’d like to do some small mods in the future also so I’m glad you document these on your channel.
Get an exhaust! Probably my favorite modification so far!
This is so satisfying to watch
Thanks!!!
Chris makes it easy to tackle a first time job no worries
Hey Chris! I've been a fan for a about 5 years now! I've watched all your videos about 3 times now. This video about installing an angle kit is my favorite even though I do not have a project car of my own. But one thing I still find interesting and want to know how to get one of my own is the angle finder. Where or how did you make yours? Because I wanna make one at home to find the angle of my truck. If you can make one of those new youtube short clip things that would be amazing!
He cut up 2 pieces of cardboard and sat them on top of each other.....
This is my favorite channel I also like when u bought your mom her dream car
you should make an *holy smokes!* t- shirt, could look cool!
Haha that’s a good idea!
Wow it’s been 5 years since this video came out.
This was my first video that I watched and still watching the videos 5 years later.
We would Like to see you put wide body kit and new spoiler on your wonderful mustang. ❤
-you are the second person who can drift a mustang PERFECTLY.
From a car guy to another, I'm happy for you, man...that surely IS satisfying!
Thanks Mustafa!
ChrisFix, hey no probs! Good luck making this your ultimate dream build...yet!
Who else liked before watching?
Me! Well, technically I watched it probably 100 times before it uploaded so...
ChrisFix OMG Chris you dont even know how happy I am right now that you replied im 14 and I own a 92 f150 crew cab with a long cab it was in an accident on the front passanger corner was smashed im working on it to get it fixed I am also building an off road gokart on my final process of adding hydraulic brakes and your hydro kit install dude I have litterally watched it close to 80 time not joking
ChrisFix Face revel?
I like the burnin’ rubber part, all dem drifts
I love your vids and you teached me to be a mechanik so thank you so much