Blew out the water, didnt work… kept pouring into the reservoir from the overflow tube. Then after holding the overflow tube closed, and running a cup, it worked immediately! So happy i dont have to replace this baby! Thank you kind sir!
I did the blow trick, no dice. But then blow, place the water container, and held the rubber nozzle , voila!! Thank you sir! You just saved my 9 years old keurig!
Thank you so much for this easy fix!!! I was so depressed thinking mine broke after 6 years of having it. This did the trick and it’s working again. I did have to blow on it and cover the over flow tube for water to come out into the cup.
Thank you this fix! I had tried everything today. The blowing did the trick. I initially blew on it straight away lips to opening but the descaling solution sprayed into my face 😂 So I got the good old turkey baster and blew air through the tip and voila! It’s back working. I did a triple rinse run through to clear out any crud that was left behind. Thanks 😊
Awesome video! Blowing made some water come out the overflow but it gave me the idea to use compressed air and that pushed water out both ends. Works like new!
Underneath the water tank? Make sure the spring moves freely and the seal is clear of dirt and calcium. Push it up and down under hot water to loosen this area if it binds. If its under the machine, a loose water tube might have a loose connection. @@PongaseChingona
How can I get the coffee to run out when I put the pod in? 4:05 I cleaned it with Vinegar and it would run the water through but whenIput the pod in it stops.
It might be logged with something still. It could even be a piece of foil from a old pod or the way it punctures it and blocks flow. Start with the easiest method of fixes and then take it apart one piece at a time. Take pictures to remember your steps to put it back together.
I did all you suggested, blowing thru the bottom of the reservoir --nothimg. There is no electricity when I plug in the machine. When Pod is inserted no light, close & press the cup I want, still no light up. The light is only on for a second. Nothing happens.
I’m not a expert on this topic, Unfortunately. I just needed to fix mine and found the problem with process of elimination; starting with the easy stuff first. Id blow through all the orifices again, clean the tank spring area, and Cup poking area. You might have to dig deeper if the simple things don’t work. It might even be something like the pump not working causing the board to fault out as a safety feature so nothing burns up. Attached is a link to help you see what you’d be dealing with if you have to get under the hood. www.nytimes.com/interactive/2013/08/14/business/how-a-keurig-vue-works.html
Make sure all the water passage ways are not clogged including the tip. Also make sure the vent is open so it don't vacuum lock. Have you tried what I described in the video to see if that helps.
Did you try and unclog all the tubes? Start with the simple stuff that doesn’t require disassembly including cleaning components with warm water. If it still doesn’t work you might have to take apart your covers and look for any restrictions in the tubes and components. It might be barely running without a pod because it has no back pressure that a pod would probably create.
I’m not an expert, I just happened to troubleshoot mine. Here is an article I found for your problem: mykup.com/fix-keurig-problems-troubleshoot-issues-solutions-tips/
Sorry, I’m not a Keurig expert so I’m not familiar with the models. I just needed to fix my problem and shared what I found. Maybe try blowing in any tube areas you can where water travels and clean all areas it moves through including intake, exit holes, valves that have Orings and springs.
@@alezthermasnaky First of all, make sure the wall outlet works by plugging in something else to it. If not, it could be a breaker or a fault plug which needs to be reset. You could unplug the machine for 30 seconds and plug it back in to see if that resets it . Double check to make sure the water in the reservoir is empty or the plunger area isn’t stuck , it might be sensor. Try warranting it out some people claim this is a common thing and Keurig warranty it out, even passed warranty claim window. Your illuminated lights could be bad and the coffee maker actually still works. Make sure the K cup area can see all the way that’s part of the troubleshooting . Make sure the wires are connected on all fittings properly. If all this still doesn’t fix it, you might need to take it apart and follow the power wire. Make sure everything is unplugged. The power wire might go to a fuse which could be blown or directly into the circuitboard where the fuse is soldered onto the board and blown or a bad connection that needs to be resoldered. Worst case is the circuit board is bad due to components going out which would require troubleshooting and replacing individual circuitry. If the circuitboard has a fuse on it, you should be able to run a multimeter to it and get a value (ohm test) and if that’s OK the areas that are bad should show some type of discoloration.
Im no expert, I just happened to solve my issue and share it but check out the following: fluentincoffee.com/keurig-shuts-off-when-i-hit-brew/ www.ifixit.com/Answers/View/640032/Why+is+my+Keurig+Classic+constantly+turning+off+while+brewing ruclips.net/video/IdE_4NIQEro/видео.html
Should’ve got a plain Jane MR COFFEE ☕️ , I don’t drink coffee, so this wasn’t my pick. You might have to double check the puncture area or check the internal areas under the plastic shell
Blew out the water, didnt work… kept pouring into the reservoir from the overflow tube. Then after holding the overflow tube closed, and running a cup, it worked immediately! So happy i dont have to replace this baby! Thank you kind sir!
I did the blow trick, no dice. But then blow, place the water container, and held the rubber nozzle , voila!! Thank you sir! You just saved my 9 years old keurig!
You’re welcome 👍🏼
Just saved me from thinking I had to buy
a new one! Thanks so much!
Excellent!! I almost threw my Keurig before watching your easy fix, thank you!!
Man, that worked perfectly, just blowing thru the hole at the bottom. Got a little of my hair wet, but no biggie, LOL. Many thanks to folks like you!
Man I gotta tell you this video just saved me money from getting a new keruig!! Thank you so much.
Thank you so much for this easy fix!!! I was so depressed thinking mine broke after 6 years of having it. This did the trick and it’s working again. I did have to blow on it and cover the over flow tube for water to come out into the cup.
Mine was probably less than 1 year old when this happened. You at least got some use out of it. Glad to hear this video helped!
Thank you this fix! I had tried everything today. The blowing did the trick. I initially blew on it straight away lips to opening but the descaling solution sprayed into my face 😂 So I got the good old turkey baster and blew air through the tip and voila! It’s back working. I did a triple rinse run through to clear out any crud that was left behind. Thanks 😊
Not exactly my Keurig, but was able to follow the first couple steps and it cleared the issue I was having
Plugging up that piece really helped. Thank you so much!!
Awesome video! Blowing made some water come out the overflow but it gave me the idea to use compressed air and that pushed water out both ends. Works like new!
Thanks-this totally worked. Used compressed air in the part at the base that accepts water from the reservoir.
❤❤❤ thank you for saving my morning! The holding the the top piece solved it.
You’re welcome, delighted to know it helped.
Thank you! The blowing on the bottom helped get the water out!
You’re welcome
It worked! I'm glad it did because I was distraught
I used compressed air and had to do it a few times but, low and behold, the brewing worked and the water is sucking back into the heating tank.
Unfortunately, when I went to make coffee the very next day it didn't work at all, didn't even make a sound.
Thank you, blowing on the bottom fixed it, great video.
It worked for me also.
Just watched this video. Fixed my problem with my Keurig . I can return the one I bought last night. 150.00 !!!! Back in my pocket.
Thank you for your help. It is fixed!!
Thank you! Its working now
Oh wait :( it worked but now it’s leaking from the bottom rear
Underneath the water tank? Make sure the spring moves freely and the seal is clear of dirt and calcium. Push it up and down under hot water to loosen this area if it binds. If its under the machine, a loose water tube might have a loose connection.
@@PongaseChingona
Thanks! Step one worked!
Excellent! Enjoy that first sip! ☕️
Awesome! Good as new. Thankyou
Thank you so much 😊
You’re welcome
Thank you, it worked!
Delighted to see its helped soo many people.
How can I get the coffee to run out when I put the pod in? 4:05 I cleaned it with Vinegar and it would run the water through but whenIput the pod in it stops.
It might be logged with something still. It could even be a piece of foil from a old pod or the way it punctures it and blocks flow. Start with the easiest method of fixes and then take it apart one piece at a time. Take pictures to remember your steps to put it back together.
I did all you suggested, blowing thru the bottom of the reservoir --nothimg. There is no electricity when I plug in the machine. When
Pod is inserted no light, close & press the cup I want, still no light up. The light is only on for a second. Nothing happens.
I’m not a expert on this topic, Unfortunately. I just needed to fix mine and found the problem with process of elimination; starting with the easy stuff first. Id blow through all the orifices again, clean the tank spring area, and
Cup poking area. You might have to dig deeper if the simple things don’t work. It might even be something like the pump not working causing the board to fault out as a safety feature so nothing burns up.
Attached is a link to help you see what you’d be dealing with if you have to get under the hood.
www.nytimes.com/interactive/2013/08/14/business/how-a-keurig-vue-works.html
My kuerig coffee machine is not working. I can hear water move but only grinds come out
Make sure all the water passage ways are not clogged including the tip. Also make sure the vent is open so it don't vacuum lock. Have you tried what I described in the video to see if that helps.
Here is another video on the problem ruclips.net/video/YBruZzE3y84/видео.html
My Kerrigan runs perfesctly until I put the pod in, it. Will not make the coffee. It just quits. Please give me a remedy. thanks.
Did you try and unclog all the tubes? Start with the simple stuff that doesn’t require disassembly including cleaning components with warm water. If it still doesn’t work you might have to take apart your covers and look for any restrictions in the tubes and components. It might be barely running without a pod because it has no back pressure that a pod would probably create.
Amazing! Thank u!!!!
Your welcome, glad it worked out
My keurig doesn’t look like that one I have a K-Supreme single serve coffee maker. How can I fix mine? The power won’t turn on any more?
I’m not an expert, I just happened to troubleshoot mine.
Here is an article I found for your problem:
mykup.com/fix-keurig-problems-troubleshoot-issues-solutions-tips/
Here is a in-depth fix if all else fails on the easy how to…
ruclips.net/video/IdE_4NIQEro/видео.html
Yup@@ProjectAnubisUSA
It worked 💪 Thanks
@@daswarlord8170 you’re welcome
Thnx man
Glad it helped 👍🏼
Dude!!!!! Thanks!!!
Welcome, I appreciate the comment
My Keurig doesn’t have that filter thingy 🤔
Sorry, I’m not a Keurig expert so I’m not familiar with the models. I just needed to fix my problem and shared what I found. Maybe try blowing in any tube areas you can where water travels and clean all areas it moves through including intake, exit holes, valves that have Orings and springs.
Omg Thank you so much!! ❤️👏🏻
You are welcome!
Thank you so much. You are a genius! 😃
You’re welcome.
Thank you kind sir 😊
You are very welcome, I hope this was able to help you and saved you from having to buy a replacement 😁
i think u just helped me
Lets hope it did
Mine is not turning on
@@alezthermasnaky
First of all, make sure the wall outlet works by plugging in something else to it. If not, it could be a breaker or a fault plug which needs to be reset.
You could unplug the machine for 30 seconds and plug it back in to see if that resets it .
Double check to make sure the water in the reservoir is empty or the plunger area isn’t stuck , it might be sensor.
Try warranting it out some people claim this is a common thing and Keurig warranty it out, even passed warranty claim window.
Your illuminated lights could be bad and the coffee maker actually still works.
Make sure the K cup area can see all the way that’s part of the troubleshooting .
Make sure the wires are connected on all fittings properly.
If all this still doesn’t fix it, you might need to take it apart and follow the power wire. Make sure everything is unplugged. The power wire might go to a fuse which could be blown or directly into the circuitboard where the fuse is soldered onto the board and blown or a bad connection that needs to be resoldered. Worst case is the circuit board is bad due to components going out which would require troubleshooting and replacing individual circuitry. If the circuitboard has a fuse on it, you should be able to run a multimeter to it and get a value (ohm test) and if that’s OK the areas that are bad should show some type of discoloration.
Power keeps powering off
Im no expert, I just happened to solve my issue and share it but check out the following:
fluentincoffee.com/keurig-shuts-off-when-i-hit-brew/
www.ifixit.com/Answers/View/640032/Why+is+my+Keurig+Classic+constantly+turning+off+while+brewing
ruclips.net/video/IdE_4NIQEro/видео.html
This didnt work for mine, Keurig is just crap!
Should’ve got a plain Jane MR COFFEE ☕️ , I don’t drink coffee, so this wasn’t my pick. You might have to double check the puncture area or check the internal areas under the plastic shell